linux-stable.git/drivers/char/hw_random, branch v5.15.78 Linux kernel stable tree hwrng: imx-rngc - Moving IRQ handler registering after imx_rngc_irq_mask_clear() 2022-10-26T10:35:24+00:00 Kshitiz Varshney kshitiz.varshney@nxp.com 2022-08-22T11:19:03+00:00 3bfc220e5ce3c30e2f25168dd41a7aa8f68fc7aa [ Upstream commit 10a2199caf437e893d9027d97700b3c6010048b7 ] Issue: While servicing interrupt, if the IRQ happens to be because of a SEED_DONE due to a previous boot stage, you end up completing the completion prematurely, hence causing kernel to crash while booting. Fix: Moving IRQ handler registering after imx_rngc_irq_mask_clear() Fixes: 1d5449445bd0 (hwrng: mx-rngc - add a driver for Freescale RNGC) Signed-off-by: Kshitiz Varshney <kshitiz.varshney@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 10a2199caf437e893d9027d97700b3c6010048b7 ]

Issue:
While servicing interrupt, if the IRQ happens to be because of a SEED_DONE
due to a previous boot stage, you end up completing the completion
prematurely, hence causing kernel to crash while booting.

Fix:
Moving IRQ handler registering after imx_rngc_irq_mask_clear()

Fixes: 1d5449445bd0 (hwrng: mx-rngc - add a driver for Freescale RNGC)
Signed-off-by: Kshitiz Varshney <kshitiz.varshney@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
hwrng: arm-smccc-trng - fix NO_ENTROPY handling 2022-10-26T10:35:24+00:00 James Cowgill james.cowgill@blaize.com 2022-08-01T20:04:18+00:00 8ffe511b7de72712e7210894e9e71d184a43d33c [ Upstream commit 042b4b169c6fb9d4df268d66282d7302dd73d37b ] The SMCCC_RET_TRNG_NO_ENTROPY switch arm is never used because the NO_ENTROPY return value is negative and negative values are handled above the switch by immediately returning. Fix by handling errors using a default arm in the switch. Fixes: 0888d04b47a1 ("hwrng: Add Arm SMCCC TRNG based driver") Signed-off-by: James Cowgill <james.cowgill@blaize.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 042b4b169c6fb9d4df268d66282d7302dd73d37b ]

The SMCCC_RET_TRNG_NO_ENTROPY switch arm is never used because the
NO_ENTROPY return value is negative and negative values are handled
above the switch by immediately returning.

Fix by handling errors using a default arm in the switch.

Fixes: 0888d04b47a1 ("hwrng: Add Arm SMCCC TRNG based driver")
Signed-off-by: James Cowgill <james.cowgill@blaize.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
hwrng: omap3-rom - fix using wrong clk_disable() in omap_rom_rng_runtime_resume() 2022-06-09T08:23:11+00:00 Yang Yingliang yangyingliang@huawei.com 2022-05-14T08:42:41+00:00 2530a7c23643a67951b67378136ad67034f53fb5 [ Upstream commit e4e62bbc6aba49a5edb3156ec65f6698ff37d228 ] 'ddata->clk' is enabled by clk_prepare_enable(), it should be disabled by clk_disable_unprepare(). Fixes: 8d9d4bdc495f ("hwrng: omap3-rom - Use runtime PM instead of custom functions") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit e4e62bbc6aba49a5edb3156ec65f6698ff37d228 ]

'ddata->clk' is enabled by clk_prepare_enable(), it should be disabled
by clk_disable_unprepare().

Fixes: 8d9d4bdc495f ("hwrng: omap3-rom - Use runtime PM instead of custom functions")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
random: pull add_hwgenerator_randomness() declaration into random.h 2022-05-30T07:29:09+00:00 Jason A. Donenfeld Jason@zx2c4.com 2022-02-13T15:17:01+00:00 80c1f7f8f3cd58114fedb190f744f485e54541c9 commit b777c38239fec5a528e59f55b379e31b1a187524 upstream. add_hwgenerator_randomness() is a function implemented and documented inside of random.c. It is the way that hardware RNGs push data into it. Therefore, it should be declared in random.h. Otherwise sparse complains with: random.c:1137:6: warning: symbol 'add_hwgenerator_randomness' was not declared. Should it be static? The alternative would be to include hw_random.h into random.c, but that wouldn't really be good for anything except slowing down compile time. Cc: Matt Mackall <mpm@selenic.com> Cc: Theodore Ts'o <tytso@mit.edu> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b777c38239fec5a528e59f55b379e31b1a187524 upstream.

add_hwgenerator_randomness() is a function implemented and documented
inside of random.c. It is the way that hardware RNGs push data into it.
Therefore, it should be declared in random.h. Otherwise sparse complains
with:

random.c:1137:6: warning: symbol 'add_hwgenerator_randomness' was not declared. Should it be static?

The alternative would be to include hw_random.h into random.c, but that
wouldn't really be good for anything except slowing down compile time.

Cc: Matt Mackall <mpm@selenic.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hwrng: nomadik - Change clk_disable to clk_disable_unprepare 2022-04-08T12:23:09+00:00 Miaoqian Lin linmq006@gmail.com 2022-03-07T11:07:24+00:00 41887c82e76f891dc3677a2a642fe15d03b7af9b [ Upstream commit 7f0f1f3ef62ed7a40e30aff28115bd94c4211d1d ] The corresponding API for clk_prepare_enable is clk_disable_unprepare, other than clk_disable_unprepare. Fix this by changing clk_disable to clk_disable_unprepare. Fixes: beca35d05cc2 ("hwrng: nomadik - use clk_prepare_enable()") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 7f0f1f3ef62ed7a40e30aff28115bd94c4211d1d ]

The corresponding API for clk_prepare_enable is clk_disable_unprepare,
other than clk_disable_unprepare.

Fix this by changing clk_disable to clk_disable_unprepare.

Fixes: beca35d05cc2 ("hwrng: nomadik - use clk_prepare_enable()")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
hwrng: atmel - disable trng on failure path 2022-04-08T12:23:08+00:00 Claudiu Beznea claudiu.beznea@microchip.com 2022-02-21T07:59:23+00:00 2684f459f9191219c00b464b21658b0704e64aae [ Upstream commit a223ea9f89ab960eb254ba78429efd42eaf845eb ] Call atmel_trng_disable() on failure path of probe. Fixes: a1fa98d8116f ("hwrng: atmel - disable TRNG during suspend") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit a223ea9f89ab960eb254ba78429efd42eaf845eb ]

Call atmel_trng_disable() on failure path of probe.

Fixes: a1fa98d8116f ("hwrng: atmel - disable TRNG during suspend")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
hwrng: cavium - HW_RANDOM_CAVIUM should depend on ARCH_THUNDER 2022-04-08T12:23:05+00:00 Geert Uytterhoeven geert+renesas@glider.be 2022-01-12T14:05:03+00:00 046f1499aef86caa614c12c736895b64c6a6c306 [ Upstream commit ab7d88549e2f7ae116afd303f32e1950cb790a1d ] The Cavium ThunderX Random Number Generator is only present on Cavium ThunderX SoCs, and not available as an independent PCIe endpoint. Hence add a dependency on ARCH_THUNDER, to prevent asking the user about this driver when configuring a kernel without Cavium Thunder SoC support. Fixes: cc2f1908c6b8f625 ("hwrng: cavium - Add Cavium HWRNG driver for ThunderX SoC.") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit ab7d88549e2f7ae116afd303f32e1950cb790a1d ]

The Cavium ThunderX Random Number Generator is only present on Cavium
ThunderX SoCs, and not available as an independent PCIe endpoint.  Hence
add a dependency on ARCH_THUNDER, to prevent asking the user about this
driver when configuring a kernel without Cavium Thunder SoC  support.

Fixes: cc2f1908c6b8f625 ("hwrng: cavium - Add Cavium HWRNG driver for ThunderX SoC.")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
hwrng: cavium - Check health status while reading random data 2022-04-08T12:23:05+00:00 Sunil Goutham sgoutham@marvell.com 2021-10-29T17:19:59+00:00 7919dfd84b352782df92c1ff2f0ca4dd5328d198 [ Upstream commit 680efb33546be8960ccbb2f4e0e43034d9c93b30 ] This RNG device is present on Marvell OcteonTx2 silicons as well and also provides entropy health status. HW continuously checks health condition of entropy and reports faults. Fault is in terms of co-processor cycles since last fault detected. This doesn't get cleared and only updated when new fault is detected. Also there are chances of detecting false positives. So to detect a entropy failure SW has to check if failures are persistent ie cycles elapsed is frequently updated by HW. This patch adds support to detect health failures using below algo. 1. Consider any fault detected before 10ms as a false positive and ignore. 10ms is chosen randomly, no significance. 2. Upon first failure detection make a note of cycles elapsed and when this error happened in realtime (cntvct). 3. Upon subsequent failure, check if this is new or a old one by comparing current cycles with the ones since last failure. cycles or time since last failure is calculated using cycles and time info captured at (2). HEALTH_CHECK status register is not available to VF, hence had to map PF registers. Also since cycles are in terms of co-processor cycles, had to retrieve co-processor clock rate from RST device. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 680efb33546be8960ccbb2f4e0e43034d9c93b30 ]

This RNG device is present on Marvell OcteonTx2 silicons as well and
also provides entropy health status.

HW continuously checks health condition of entropy and reports
faults. Fault is in terms of co-processor cycles since last fault
detected. This doesn't get cleared and only updated when new fault
is detected. Also there are chances of detecting false positives.
So to detect a entropy failure SW has to check if failures are
persistent ie cycles elapsed is frequently updated by HW.

This patch adds support to detect health failures using below algo.
1. Consider any fault detected before 10ms as a false positive and ignore.
   10ms is chosen randomly, no significance.
2. Upon first failure detection make a note of cycles elapsed and when this
   error happened in realtime (cntvct).
3. Upon subsequent failure, check if this is new or a old one by comparing
   current cycles with the ones since last failure. cycles or time since
   last failure is calculated using cycles and time info captured at (2).

HEALTH_CHECK status register is not available to VF, hence had to map
PF registers. Also since cycles are in terms of co-processor cycles,
had to retrieve co-processor clock rate from RST device.

Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
hwrng: mtk - Force runtime pm ops for sleep ops 2021-11-18T18:16:31+00:00 Markus Schneider-Pargmann msp@baylibre.com 2021-09-30T19:12:42+00:00 594a893df55db9915a68e9ee5b985280bd03d089 [ Upstream commit b6f5f0c8f72d348b2d07b20d7b680ef13a7ffe98 ] Currently mtk_rng_runtime_suspend/resume is called for both runtime pm and system sleep operations. This is wrong as these should only be runtime ops as the name already suggests. Currently freezing the system will lead to a call to mtk_rng_runtime_suspend even if the device currently isn't active. This leads to a clock warning because it is disabled/unprepared although it isn't enabled/prepared currently. This patch fixes this by only setting the runtime pm ops and forces to call the runtime pm ops from the system sleep ops as well if active but not otherwise. Fixes: 81d2b34508c6 ("hwrng: mtk - add runtime PM support") Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit b6f5f0c8f72d348b2d07b20d7b680ef13a7ffe98 ]

Currently mtk_rng_runtime_suspend/resume is called for both runtime pm
and system sleep operations.

This is wrong as these should only be runtime ops as the name already
suggests. Currently freezing the system will lead to a call to
mtk_rng_runtime_suspend even if the device currently isn't active. This
leads to a clock warning because it is disabled/unprepared although it
isn't enabled/prepared currently.

This patch fixes this by only setting the runtime pm ops and forces to
call the runtime pm ops from the system sleep ops as well if active but
not otherwise.

Fixes: 81d2b34508c6 ("hwrng: mtk - add runtime PM support")
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
hwrng: Add Arm SMCCC TRNG based driver 2021-08-06T11:45:26+00:00 Andre Przywara andre.przywara@arm.com 2021-07-31T20:48:45+00:00 0888d04b47a165ae8c429c6fe11b3c43f5017f31 The "Arm True Random Number Generator Firmware Interface"[1] provides an SMCCC based interface to a true hardware random number generator. So far we are using that in arch_get_random_seed(), but it might be useful to expose the entropy through the /dev/hwrng device as well. This allows to assess the quality of the implementation, by using "rngtest" from the rng-tools package, for example. Add a simple platform driver implementing the hw_random interface. The corresponding platform device is created by the SMCCC core code, we just match it here by name and provide a module alias. Since the firmware takes care about serialisation, this can happily coexist with the arch_get_random_seed() bits. [1] https://developer.arm.com/documentation/den0098/latest/ Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 
The "Arm True Random Number Generator Firmware Interface"[1] provides
an SMCCC based interface to a true hardware random number generator.
So far we are using that in arch_get_random_seed(), but it might be
useful to expose the entropy through the /dev/hwrng device as well. This
allows to assess the quality of the implementation, by using "rngtest"
from the rng-tools package, for example.

Add a simple platform driver implementing the hw_random interface.
The corresponding platform device is created by the SMCCC core code,
we just match it here by name and provide a module alias.

Since the firmware takes care about serialisation, this can happily
coexist with the arch_get_random_seed() bits.

[1] https://developer.arm.com/documentation/den0098/latest/

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>