linux-stable.git/drivers/bus, branch v5.2.19

bus: ti-sysc: Simplify cleanup upon failures in sysc_probe()

2019-09-21T05:18:27+00:00

[ Upstream commit a304f483b6b00d42bde41c45ca52c670945348e2 ]

The clocks are not yet parsed and prepared until after a successful
sysc_get_clocks(), so there is no need to unprepare the clocks upon
any failure of any of the prior functions in sysc_probe(). The current
code path would have been a no-op because of the clock validity checks
within sysc_unprepare(), but let's just simplify the cleanup path by
returning the error directly.

While at this, also fix the cleanup path for a sysc_init_resets()
failure which is executed after the clocks are prepared.

Signed-off-by: Suman Anna 
Signed-off-by: Tony Lindgren 
Signed-off-by: Sasha Levin

ARM: dts: Fix incorrect dcan register mapping for am3, am4 and dra7

2019-09-21T05:18:25+00:00

[ Upstream commit 89bbc6f1eb90809b1538b3a9c54030c558180e3b ]

We are currently using a wrong register for dcan revision. Although
this is currently only used for detecting the dcan module, let's
fix it to avoid confusion.

Tested-by: Keerthy 
Signed-off-by: Tony Lindgren 
Signed-off-by: Sasha Levin

bus: ti-sysc: Fix using configured sysc mask value

2019-09-21T05:18:23+00:00

[ Upstream commit e212abd452a4af3174fcd469d46656f83e135a19 ]

We have cases where there are no softreset bits like with am335x lcdc.
In that case ti,sysc-mask = <0> needs to be handled properly.

Tested-by: Keerthy 
Signed-off-by: Tony Lindgren 
Signed-off-by: Sasha Levin

bus: ti-sysc: Fix handling of forced idle

2019-09-21T05:18:22+00:00

[ Upstream commit 6ee8241d17c68b94a91efabfd6bdfe63bb1b79c1 ]

For some devices we can get the following warning on boot:

ti-sysc 48485200.target-module: sysc_disable_module: invalid midlemode

Fix this by treating SYSC_IDLE_FORCE like we do for the other bits
for idlemodes mask.

Fixes: d59b60564cbf ("bus: ti-sysc: Add generic enable/disable functions")
Cc: Roger Quadros 
Reviewed-by: Suman Anna 
Tested-by: Keerthy 
Signed-off-by: Tony Lindgren 
Signed-off-by: Sasha Levin

bus: hisi_lpc: Add .remove method to avoid driver unbind crash

2019-09-06T08:23:47+00:00

commit 10e62b47973b0b0ceda076255bcb147b83e20517 upstream.

The original driver author seemed to be under the impression that a driver
cannot be removed if it does not have a .remove method. Or maybe if it is
a built-in platform driver.

This is not true. This crash can be created:

root@ubuntu:/sys/bus/platform/drivers/hisi-lpc# echo HISI0191\:00 > unbind
root@ubuntu:/sys/bus/platform/drivers/hisi-lpc# ipmitool raw 6 1
 Unable to handle kernel paging request at virtual address ffff000010035010
 Mem abort info:
   ESR = 0x96000047
   Exception class = DABT (current EL), IL = 32 bits
   SET = 0, FnV = 0
   EA = 0, S1PTW = 0
 Data abort info:
   ISV = 0, ISS = 0x00000047
   CM = 0, WnR = 1
 swapper pgtable: 4k pages, 48-bit VAs, pgdp=000000000118b000
 [ffff000010035010] pgd=0000041ffbfff003, pud=0000041ffbffe003, pmd=0000041ffbffd003, pte=0000000000000000
 Internal error: Oops: 96000047 [#1] PREEMPT SMP
 Modules linked in:
 CPU: 17 PID: 1473 Comm: ipmitool Not tainted 5.2.0-rc5-00003-gf68c53b414a3-dirty #198
 Hardware name: Huawei Taishan 2280 /D05, BIOS Hisilicon D05 IT21 Nemo 2.0 RC0 04/18/2018
 pstate: 20000085 (nzCv daIf -PAN -UAO)
 pc : hisi_lpc_target_in+0x7c/0x120
 lr : hisi_lpc_target_in+0x70/0x120
 sp : ffff00001efe3930
 x29: ffff00001efe3930 x28: ffff841f9f599200
 x27: 0000000000000002 x26: 0000000000000000
 x25: 0000000000000080 x24: 00000000000000e4
 x23: 0000000000000000 x22: 0000000000000064
 x21: ffff801fb667d280 x20: 0000000000000001
 x19: ffff00001efe39ac x18: 0000000000000000
 x17: 0000000000000000 x16: 0000000000000000
 x15: 0000000000000000 x14: 0000000000000000
 x13: 0000000000000000 x12: 0000000000000000
 x11: 0000000000000000 x10: 0000000000000000
 x9 : 0000000000000000 x8 : ffff841febe60340
 x7 : ffff801fb55c52e8 x6 : 0000000000000000
 x5 : 0000000000ffc0e3 x4 : 0000000000000001
 x3 : ffff801fb667d280 x2 : 0000000000000001
 x1 : ffff000010035010 x0 : ffff000010035000
 Call trace:
  hisi_lpc_target_in+0x7c/0x120
  hisi_lpc_comm_in+0x88/0x98
  logic_inb+0x5c/0xb8
  port_inb+0x18/0x20
  bt_event+0x38/0x808
  smi_event_handler+0x4c/0x5a0
  check_start_timer_thread.part.4+0x40/0x58
  sender+0x78/0x88
  smi_send.isra.6+0x94/0x108
  i_ipmi_request+0x2c4/0x8f8
  ipmi_request_settime+0x124/0x160
  handle_send_req+0x19c/0x208
  ipmi_ioctl+0x2c0/0x990
  do_vfs_ioctl+0xb8/0x8f8
  ksys_ioctl+0x80/0xb8
  __arm64_sys_ioctl+0x1c/0x28
  el0_svc_common.constprop.0+0x64/0x160
  el0_svc_handler+0x28/0x78
  el0_svc+0x8/0xc
 Code: 941d1511 aa0003f9 f94006a0 91004001 (b9000034)
 ---[ end trace aa842b86af7069e4 ]---

The problem here is that the host goes away but the associated logical PIO
region remains registered, as do the children devices.

Fix by adding a .remove method to tidy-up by removing the child devices
and unregistering the logical PIO region.

Cc: stable@vger.kernel.org
Fixes: adf38bb0b595 ("HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindings")
Signed-off-by: John Garry 
Signed-off-by: Wei Xu 
Signed-off-by: Greg Kroah-Hartman

bus: hisi_lpc: Unregister logical PIO range to avoid potential use-after-free

2019-09-06T08:23:47+00:00

commit 1b15a5632a809ab57d403fd972ca68785363b654 upstream.

If, after registering a logical PIO range, the driver probe later fails,
the logical PIO range memory will be released automatically.

This causes an issue, in that the logical PIO range is not unregistered
and the released range memory may be later referenced.

Fix by unregistering the logical PIO range.

And since we now unregister the logical PIO range for probe failure, avoid
the special ordering of setting logical PIO range ops, which was the
previous (poor) attempt at a safeguard against this.

Cc: stable@vger.kernel.org
Fixes: adf38bb0b595 ("HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindings")
Signed-off-by: John Garry 
Signed-off-by: Wei Xu 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx

2019-06-21T16:58:42+00:00

Pull still more SPDX updates from Greg KH:
 "Another round of SPDX updates for 5.2-rc6

  Here is what I am guessing is going to be the last "big" SPDX update
  for 5.2. It contains all of the remaining GPLv2 and GPLv2+ updates
  that were "easy" to determine by pattern matching. The ones after this
  are going to be a bit more difficult and the people on the spdx list
  will be discussing them on a case-by-case basis now.

  Another 5000+ files are fixed up, so our overall totals are:
	Files checked:            64545
	Files with SPDX:          45529

  Compared to the 5.1 kernel which was:
	Files checked:            63848
	Files with SPDX:          22576

  This is a huge improvement.

  Also, we deleted another 20000 lines of boilerplate license crud,
  always nice to see in a diffstat"

* tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (65 commits)
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 507
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 506
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 505
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 504
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 503
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 502
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 501
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 499
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 498
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 497
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 496
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 495
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 491
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 490
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 489
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 488
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 487
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 486
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 485
  ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

2019-06-19T15:09:55+00:00

Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Enrico Weigelt 
Reviewed-by: Kate Stewart 
Reviewed-by: Allison Randal 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman

Merge tag 'omap-for-v5.2/fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

2019-06-16T20:27:36+00:00

Fixes for omap variants for dra7 mmc voltage and boot issues

This series contains dra7 mmc voltage fixes, and fixes to the recent
changes to probe devices with device tree data insteas of legacy
platform data:

- Two fixes for dra7 mmc that needs 1.8V mode disabled as in case of a
  reset, the bootrom will try to access the mmc card at 3.3V potentially
  damaging the card

- Two regression fixes for am335x d_can. We must allow devices with no
  control registers for ti-sysc interconnect target module driver for
  at least d_can, and we remove the incorrect control registers for
  d_can. And we must configure the osc clock for d_can as otherwise
  register access may fail depending on the bootloader version

- Four regression fixes for dra7 variant dts files to tag rtc and usb4
  as disabled for dra71x and dra76x. These SoC variants do not have
  these devices, and got accidentally enabled when the L4 interconnect
  got defined in the dra7-l4.dtsi for the dra7 SoC family

* tag 'omap-for-v5.2/fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: dra71x: Disable usb4_tm target module
  ARM: dts: dra71x: Disable rtc target module
  ARM: dts: dra76x: Disable usb4_tm target module
  ARM: dts: dra76x: Disable rtc target module
  ARM: dts: dra76x: Update MMC2_HS200_MANUAL1 iodelay values
  ARM: dts: am57xx-idk: Remove support for voltage switching for SD card
  bus: ti-sysc: Handle devices with no control registers
  ARM: dts: Configure osc clock for d_can on am335x

Signed-off-by: Olof Johansson

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174

2019-05-30T18:26:41+00:00

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation this program is
  distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 655 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Allison Randal 
Reviewed-by: Kate Stewart 
Reviewed-by: Richard Fontana 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de
Signed-off-by: Greg Kroah-Hartman