commit 885dbd154b2f2ee305cec6fd0a162e1a77ae2b06 upstream.

This reverts commit 1737cac69369 ("bus: mvebu-mbus: make sure SDRAM CS
for DMA don't overlap the MBus bridge window"), because it breaks DMA
on platforms having more than 2 GB of RAM.

This commit changed the information reported to DMA masters device
drivers through the mv_mbus_dram_info() function so that the returned
DRAM ranges do not overlap with I/O windows.

This was necessary as a preparation to support the new CESA Crypto
Engine driver, which will use DMA for cryptographic operations. But
since it does DMA with the SRAM which is mapped as an I/O window,
having DRAM ranges overlapping with I/O windows was problematic.

To solve this, the above mentioned commit changed the mvebu-mbus to
adjust the DRAM ranges so that they don't overlap with the I/O
windows. However, by doing this, we re-adjust the DRAM ranges in a way
that makes them have a size that is no longer a power of two. While
this is perfectly fine for the Crypto Engine, which supports DRAM
ranges with a granularity of 64 KB, it breaks basically all other DMA
masters, which expect power of two sizes for the DRAM ranges.

Due to this, if the installed system memory is 4 GB, in two
chip-selects of 2 GB, the second DRAM range will be reduced from 2 GB
to a little bit less than 2 GB to not overlap with the I/O windows, in
a way that results in a DRAM range that doesn't have a power of two
size. This means that whenever you do a DMA transfer with an address
located in the [ 2 GB ; 4 GB ] area, it will freeze the system. Any
serious DMA activity like simply running:

  for i in $(seq 1 64) ; do dd if=/dev/urandom of=file$i bs=1M count=16 ; done

in an ext3 partition mounted over a SATA drive will freeze the system.

Since the new CESA crypto driver that uses DMA has not been merged
yet, the easiest fix is to simply revert this commit. A follow-up
commit will introduce a different solution for the CESA crypto driver.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes: 1737cac69369 ("bus: mvebu-mbus: make sure SDRAM CS for DMA don't overlap the MBus bridge window")
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8c9e06e64768665503e778088a39ecff3a6f2e0c upstream.

Commit a0b5cd4ac2d6 ("bus: mvebu-mbus: use automatic I/O
synchronization barriers") enabled the usage of automatic I/O
synchronization barriers by enabling bit WIN_CTRL_SYNCBARRIER in the
control registers of MBus windows, but on non io-coherent platforms
(orion5x, kirkwood and dove) the WIN_CTRL_SYNCBARRIER bit in
the window control register is either reserved (all windows except 6
and 7) or enables read-only protection (windows 6 and 7).

Signed-off-by: Nicolas Schichan <nschichan@freebox.fr>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes: a0b5cd4ac2d6 ("bus: mvebu-mbus: use automatic I/O synchronization barriers")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull ARM SoC platform changes from Olof Johansson:
 "New and updated SoC support.  Also included are some cleanups where
  the platform maintainers hadn't separated cleanups from new developent
  in separate branches.

  Some of the larger things worth pointing out:

   - A large set of changes from Alexandre Belloni and Nicolas Ferre
     preparing at91 platforms for multiplatform and cleaning up quite a
     bit in the process.

   - Removal of CSR's "Marco" SoC platform that never made it out to the
     market.  We love seeing these since it means the vendor published
     support before product was out, which is exactly what we want!

  New platforms this release are:

   - Conexant Digicolor (CX92755 SoC)
   - Hisilicon HiP01 SoC
   - CSR/sirf Atlas7 SoC
   - ST STiH418 SoC
   - Common code changes for Nvidia Tegra132 (64-bit SoC)

  We're seeing more and more platforms having a harder time labelling
  changes as cleanups vs new development -- which is a good sign that
  we've come quite far on the cleanup effort.  So over time we might
  start combining the cleanup and new-development branches more"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (124 commits)
  ARM: at91/trivial: unify functions and machine names
  ARM: at91: remove at91_dt_initialize and machine init_early()
  ARM: at91: change board files into SoC files
  ARM: at91: remove at91_boot_soc
  ARM: at91: move alternative initial mapping to board-dt-sama5.c
  ARM: at91: merge all SOC_AT91SAM9xxx
  ARM: at91: at91rm9200: set idle and restart from rm9200_dt_device_init()
  ARM: digicolor: select syscon and timer
  ARM: zynq: Simplify SLCR initialization
  ARM: zynq: PM: Fixed simple typo.
  ARM: zynq: Setup default gpio number for Xilinx Zynq
  ARM: digicolor: add low level debug support
  ARM: initial support for Conexant Digicolor CX92755 SoC
  ARM: OMAP2+: Add dm816x hwmod support
  ARM: OMAP2+: Add clock domain support for dm816x
  ARM: OMAP2+: Add board-generic.c entry for ti81xx
  ARM: at91: pm: remove warning to remove SOC_AT91SAM9263 usage
  ARM: at91: remove unused mach/system_rev.h
  ARM: at91: stop using HAVE_AT91_DBGUx
  ARM: at91: fix ordering of SRAM and PM initialization
  ...

printk and friends can now format bitmaps using '%*pb[l]'.  cpumask
and nodemask also provide cpumask_pr_args() and nodemask_pr_args()
respectively which can be used to generate the two printf arguments
necessary to format the specified cpu/nodemask.

* Line termination only requires one extra space at the end of the
  buffer.  Use PAGE_SIZE - 1 instead of PAGE_SIZE - 2 when formatting.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge "mvebu/fixes #3" from Andrew Lunn:

mvebu fixes for 3.19. (Part 4)

bus: mvebu-mbus: fix support of MBus window 13

* tag 'mvebu-fixes-3.19-4' of git://git.infradead.org/linux-mvebu:
  bus: mvebu-mbus: fix support of MBus window 13
  ARM: mvebu: completely disable hardware I/O coherency

Signed-off-by: Olof Johansson <olof@lixom.net>

The mvebu-mbus driver reads the SDRAM window registers, and make the
information about the DRAM CS configuration available to device
drivers using the mv_mbus_dram_info() API. This information is used by
the DMA-capable device drivers to program their address decoding
windows.

Until now, we were basically providing the SDRAM window register
details as is. However, it turns out that the DMA capability of the
CESA cryptographic engine consists in doing DMA being the DRAM and the
crypto SRAM mapped as a MBus window. For this case, it is very
important that the SDRAM CS information does not overlap with the MBus
bridge window.

Therefore, this commit improves the mvebu-mbus driver to make sure we
adjust the SDRAM CS information so that it doesn't overlap with the
MBus bridge window. This problem was reported by Boris Brezillon,
while working on the mv_cesa driver for Armada 37x/38x/XP. We use the
memblock memory information to know where the usable RAM is located,
as this information is guaranteed to be correct on all SoC variants.

We could have used the MBus bridge window registers on Armada 370/XP,
but they are not really used on Armada 375/38x (Cortex-A9 based),
since the PL310 L2 filtering is used instead to discriminate between
RAM accesses and I/O accesses. Therefore, using the memblock
information is more generic and works accross the different platforms.

Reported-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Andrew Lunn <andrew@lunn.ch>: Fixed merge conflict]
Signed-off-by: Andrew Lunn <andrew@lunn.ch>

On Armada XP, 375 and 38x the MBus window 13 has the remap capability,
like windows 0 to 7. However, the mvebu-mbus driver isn't currently
taking into account this special case, which means that when window 13
is actually used, the remap registers are left to 0, making the device
using this MBus window unavailable.

To make things even more fun, the hardware designers have chosen to
put the window 13 remap registers in a completely custom location,
using a logic that differs from the one used for all other remappable
windows.

To solve this problem, this commit:

 * Adds a SoC specific function to calculate offset of remap registers
   to the mvebu_mbus_soc_data structure. This function,
   ->win_remap_offset(), returns the offset of the remap registers, or
   MVEBU_MBUS_NO_REMAP if the window does not have the remap
   capability. This new function replaces the previous integer field
   num_remappable_wins, which was insufficient to encode the special
   case of window 13.

 * Adds an implementation of the ->win_remap_offset() function for the
   various SoC families. Some have 2 first windows that are remapable,
   some the 4 first, some the 8 first, and then the Armada XP/375/38x
   case where the 8 first are remapable plus the special window
   13. This is implemented in functions
   generic_mbus_win_remap_2_offset(),
   generic_mbus_win_remap_4_offset(),
   generic_mbus_win_remap_8_offset() and
   armada_xp_mbus_win_remap_offset() respectively.

 * Change the code to use the ->win_remap_offset() function when
   accessing the remap registers, and also to use a newly introduced
   mvebu_mbus_window_is_remappable() helper function that tells
   whether a given window is remapable or not.

 * Separate Armada 370 from XP/375/38X because the window 13 of Armada
   370 does not support the remap capability.

[Thomas: adapted for the mainline kernel, minor clarifications in the
code, reword the commit log.]

Signed-off-by: Michal Mazur <arg@semihalf.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Andrew Lunn <andrew@lunn.ch>: Undo the simple fix for stable]
Signed-off-by: Andrew Lunn <andrew@lunn.ch>

Instead of using explicit I/O synchronization barriers shoehorned
inside the streaming DMA mappings API (in
arch/arm/mach-mvebu/coherency.c), we are switching to use automatic
I/O synchronization barrier.

The primary motivation for this change is that explicit I/O
synchronization barriers are not only needed for streaming DMA
mappings (which can easily be done by overriding the dma_map_ops), but
also for coherent DMA mappings (which is a lot less easy to do, since
the kernel assumes such mappings are coherent and don't require any
sort of cache maintenance operation to ensure the consistency of the
buffers).

Switching to automatic I/O synchronization barriers will also allow us
to use the existing arm_coherent_dma_ops instead of our custom
arm_dma_ops.

In order to use automatic I/O synchronization barriers, this commit
changes mvebu-mbus in two ways:

 - It enables automatic I/O synchronization barriers in the 0x84
   register of the MBus bridge, by enabling such barriers for all MBus
   units. This enables automatic barriers for the on-SoC peripherals
   that are doing DMA.

 - It enables the SyncEnable bit in the MBus windows, so that PCIe
   devices also use automatic I/O synchronization barrier.

This automatic synchronization barrier relies on the assumption that
at least one register of a given hardware unit is read before the
driver accesses the DMA mappings modified by this unit. This
assumption is guaranteed for PCI devices by vertue of the PCI
standard, and we can reasonably verify that this assumption is also
true for the limited number of platform drivers doing DMA used on
Marvell EBU platforms.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>

On Armada XP, 375 and 38x the MBus window 13 has the remap capability,
like windows 0 to 7. However, the mvebu-mbus driver isn't currently
taking into account this special case, which means that when window 13
is actually used, the remap registers are left to 0, making the device
using this MBus window unavailable.

As a minimal fix for stable, don't use window 13. A full fix will
follow later.

Fixes: fddddb52a6c ("bus: introduce an Marvell EBU MBus driver")
Cc: <stable@vger.kernel.org> # v3.10+
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>

The arm-cci driver completes the probe sequence even if the cci node is
marked as disabled. Add a check in the driver to honour the cci status
in the device tree.

Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>