linux-stable.git/drivers/bluetooth, branch v7.1.8

Bluetooth: btmtk: Fix short read errors in btmtk_usb_reg_read()

2026-08-09T18:26:42+00:00

commit 0cc4b5649ae83deb8222100dba31aa0f100a19cd upstream.

If btmtk_usb_reg_read() gets a "short" read from a device, it will
accidentally treat that as a "real" read and populate the returned value
with some unknown and probably totally invalid data.

Fix this logic error up by calling usb_control_msg_recv() which
guarantees a "full" read happens, and then simplify the error checking
for when btmtk_usb_reg_read() is called (it's really just
btmtk_usb_id_get() that calls btmtk_usb_reg_read(), so fix up those
return sites.

Cc: stable 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: btmtk: Fix short read errors in btmtk_usb_uhw_reg_read()

2026-08-09T18:26:42+00:00

commit b186c18c4843dd58adc29443369bddc71cb626a3 upstream.

If btmtk_usb_uhw_reg_read() gets a "short" read from a device, it will
accidentally treat that as a "real" read and populate the returned value
with some unknown and probably totally invalid data.

Fix this logic error up by calling usb_control_msg_recv() which
guarantees a "full" read happens, and then simplify the error checking
for when btmtk_usb_uhw_reg_read() is called.

Note, one caller of btmtk_usb_uhw_reg_read() does not check the return
value, but as we pre-initialize the return value as 0, an incorrect read
will not do anything wrong.

Cc: stable 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: btusb: Fix short read errors in btusb_qca_send_vendor_req()

2026-08-09T18:26:42+00:00

commit cac43d360c928bc0cbbd18809632388265649761 upstream.

If btusb_qca_send_vendor_req() gets a "short" read from a device, it
will accidentally treat that as a "real" read and populate the returned
value with some unknown and probably totally invalid data.

Fix this logic error up by calling usb_control_msg_recv() which
guarantees a "full" read happens, and then simplify the error checking
for when btusb_qca_send_vendor_req() is called.

Cc: stable 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: btintel: Validate length before parsing diagnostics TLV

2026-08-09T18:26:33+00:00

[ Upstream commit b640ff9af3c809ff5ea2077fbba17df1594ec1e4 ]

btintel_diagnostics() accesses tlv->val[0] without first validating
that the diagnostics VSE is long enough to contain that field, so
may cause reading data beyond the received frame.

Fix by validating the length before access.

Fixes: af395330abed ("Bluetooth: btintel: Add Intel devcoredump support")
Signed-off-by: Zijun Hu 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Sasha Levin

Bluetooth: btusb: validate Realtek vendor event length

2026-08-03T09:25:30+00:00

[ Upstream commit df541cd485ff80a5ddc579d99687bc7506df9851 ]

btusb_recv_event_realtek() reads the event code at data[0] and the Realtek
subevent code at data[2] before deciding whether to consume a vendor event
as a coredump.

For example, the two-byte event ff 00 contains a complete vendor-event
header declaring zero parameters. The old classifier still reads a
nonexistent third byte and can misclassify the event as a coredump if the
adjacent byte is 0x34.

Require the HCI event header and first parameter to be present before
inspecting the Realtek subevent code. Short events continue through the
normal HCI receive path, which owns their protocol validation.

Fixes: 044014ce85a1 ("Bluetooth: btrtl: Add Realtek devcoredump support")
Signed-off-by: Pengpeng Hou 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Sasha Levin

Bluetooth: hci_qca: Clear memdump state on invalid dump size

2026-08-03T09:25:22+00:00

[ Upstream commit bf587a10c33e5571a299742e45bc18960b9912e7 ]

qca_controller_memdump() allocates qca->qca_memdump before processing
the first dump packet. For a sequence-zero packet it then disables IBS,
marks memdump collection active, and reads the advertised dump size.

If the controller reports a zero dump size, the error path frees the
local qca_memdump object and returns without clearing qca->qca_memdump
or undoing the collection state. A later memdump work item initializes
its local pointer from qca->qca_memdump and skips allocation when that
pointer is non-NULL, so it can operate on freed memory. The stale
collection and IBS-disabled flags can also leave waiters or later
transmit handling blocked behind an aborted dump.

Clear the saved pointer and memdump state before returning from the
invalid-size path, matching the cleanup used when hci_devcd_init() fails.

A static analysis checker reported the stale memdump state, and manual
source review confirmed the invalid-size failure path.

Fixes: 06d3fdfcdf5c ("Bluetooth: hci_qca: Add qcom devcoredump support")
Signed-off-by: Ruoyu Wang 
Reviewed-by: Paul Menzel 
Reviewed-by: Zijun Hu 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Sasha Levin

Bluetooth: qca: fix NVM tag length underflow in TLV parser

2026-08-03T09:25:21+00:00

[ Upstream commit c90164ca0f7036942ba088eb7ea8d3f6c2352020 ]

In the TLV_TYPE_NVM branch of qca_tlv_check_data() the tag loop bound is
"while (idx < length - sizeof(struct tlv_type_nvm))". "length" is a signed
int from the firmware TLV header and sizeof(struct tlv_type_nvm) is a
size_t (12), so "length" is converted to size_t and any firmware-supplied
"length" < 12 makes the subtraction wrap to a huge value. The loop body
then reads a 12-byte struct tlv_type_nvm past the end of the short
vmalloc'd firmware buffer (and the EDL_TAG_ID_* handlers can write past it).

Rewrite the bound as "idx + sizeof(struct tlv_type_nvm) <= length"; both
operands are non-negative, so it no longer underflows and a "length" too
small for one record correctly skips the loop.

  BUG: KASAN: vmalloc-out-of-bounds in qca_download_firmware.isra.0 (drivers/bluetooth/btqca.c:421)
  Read of size 2 at addr ffffc900000e5004 by task kworker/u9:0/52
  Workqueue: hci0 hci_power_on
  Call Trace:
   ...
   kasan_report (mm/kasan/report.c:595)
   qca_download_firmware.isra.0 (drivers/bluetooth/btqca.c:421 drivers/bluetooth/btqca.c:617)
   qca_uart_setup (drivers/bluetooth/btqca.c:948)
   qca_setup (drivers/bluetooth/hci_qca.c:2029)
   hci_uart_setup (drivers/bluetooth/hci_ldisc.c:438)
   hci_dev_open_sync (net/bluetooth/hci_sync.c:5227)
   hci_power_on (net/bluetooth/hci_core.c:920)
   process_one_work (kernel/workqueue.c:3322)
   worker_thread (kernel/workqueue.c:3486)
   kthread (kernel/kthread.c:436)
   ret_from_fork (arch/x86/kernel/process.c:158)
   ret_from_fork_asm (arch/x86/entry/entry_64.S:245)

Fixes: 2e4edfa1e2bd ("Bluetooth: qca: add missing firmware sanity checks")
Reported-by: Weiming Shi 
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Xiang Mei 
Reported-by: Weiming Shi 
Reviewed-by: Johan Hovold 
Acked-by: Bartosz Golaszewski 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Sasha Levin

Bluetooth: btrtl: validate firmware patch bounds

2026-07-24T14:21:22+00:00

commit 609c5b04a28dc1b0f3af6a7bc93055135b2d2059 upstream.

rtlbt_parse_firmware() copies patch_length - 4 bytes before appending the
firmware version. A malformed firmware patch shorter than the version field
can make this subtraction underflow and turn the copy into an oversized
read and write during Bluetooth setup.

The existing patch_offset + patch_length check can also wrap on 32-bit
architectures. Validate the patch length and range without arithmetic
overflow before allocating or copying the patch.

Fixes: db33c77dddc2 ("Bluetooth: btrtl: Create separate module for Realtek BT driver")
Cc: stable@vger.kernel.org
Signed-off-by: Laxman Acharya Padhya 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: bpa10x: avoid OOB read of revision string in bpa10x_setup()

2026-07-24T14:20:43+00:00

[ Upstream commit dd068ef044128db655f48323a4acfd5907e04903 ]

bpa10x_setup() sends the vendor command 0xfc0e and passes the response
to bt_dev_info() and hci_set_fw_info() as a "%s" string starting at
skb->data + 1, without checking the length:

	bt_dev_info(hdev, "%s", (char *)(skb->data + 1));
	hci_set_fw_info(hdev, "%s", skb->data + 1);

A device that returns a one-byte response (status only) leaves
skb->data + 1 past the end of the data, and the %s walk reads adjacent
slab memory until it meets a NUL. The same happens when the payload is
not NUL-terminated within skb->len. The out-of-bounds bytes end up in
the kernel log and the firmware-info debugfs file.

Print the revision string with a bounded "%.*s" limited to skb->len - 1
instead. This keeps the string readable for well-behaved devices while
never reading past the received data, and does not fail setup, so a
device returning a short or unterminated response keeps working.

Fixes: ddd68ec8f484 ("Bluetooth: bpa10x: Read revision information in setup stage")
Reported-by: Xiang Mei 
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Weiming Shi 
Reported-by: Xiang Mei 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Sasha Levin

Bluetooth: btintel_pcie: Refactor FLR to use device_reprobe()

2026-07-24T14:20:43+00:00

[ Upstream commit 9c36951474d8e1127f4946f39cb874a200f34e9f ]

The FLR branch in btintel_pcie_reset_work() open-coded the entire
re-init sequence: btintel_pcie_release_hdev() (hci_unregister_dev +
hci_free_dev), pci_try_reset_function(), enable_interrupts /
config_msix / enable_bt / reset_ia / start_rx, then
btintel_pcie_setup_hdev() (hci_alloc_dev_priv + hci_register_dev).
Every probe() init step had to be kept in sync with this second
copy in the reset path, and any failure mid-sequence left state to
unwind by hand.

The PLDR path already delegates teardown and re-init to the PCI
core via device_reprobe(): .remove() destroys data through devres
and unregisters hdev, then .probe() rebuilds everything from
scratch. Apply the same model to FLR.

Introduce btintel_pcie_perform_flr() mirroring perform_pldr(). It
runs pci_try_reset_function() (required to avoid the device_lock
ABBA against btintel_pcie_remove(), which calls
disable_work_sync(&reset_work) while holding device_lock) followed
by device_reprobe(). On success, data is destroyed and a fresh
probe re-INIT_WORKs coredump_work with disable count 0, so
enable_work() must not be called; on failure, data is still alive
and the caller balances the earlier disable_work_sync(). The
contract is documented on the helper and reiterated at the
reset_work() call site.

reset_work() shrinks to interrupt/worker drain, dispatch on
reset_type, and the single asymmetry between the two paths. The
out_enable label, the manual unregister/register pair, and the
forward declaration of btintel_pcie_setup_hdev() are dropped.

No intended functional change; FLR and PLDR now share one
teardown contract.

Fixes: 256ab9520d15 ("Bluetooth: btintel_pcie: Support Function level reset")
Assisted-by: GitHub-Copilot:claude-4.7-opus
Signed-off-by: Kiran K 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Sasha Levin