linux-stable.git/drivers/bluetooth, branch v6.6.67

Bluetooth: btmtk: avoid UAF in btmtk_process_coredump

2024-12-19T17:11:34+00:00

[ Upstream commit b548f5e9456c568155499d9ebac675c0d7a296e8 ]

hci_devcd_append may lead to the release of the skb, so it cannot be
accessed once it is called.

==================================================================
BUG: KASAN: slab-use-after-free in btmtk_process_coredump+0x2a7/0x2d0 [btmtk]
Read of size 4 at addr ffff888033cfabb0 by task kworker/0:3/82

CPU: 0 PID: 82 Comm: kworker/0:3 Tainted: G     U             6.6.40-lockdep-03464-g1d8b4eb3060e #1 b0b3c1cc0c842735643fb411799d97921d1f688c
Hardware name: Google Yaviks_Ufs/Yaviks_Ufs, BIOS Google_Yaviks_Ufs.15217.552.0 05/07/2024
Workqueue: events btusb_rx_work [btusb]
Call Trace:
 
 dump_stack_lvl+0xfd/0x150
 print_report+0x131/0x780
 kasan_report+0x177/0x1c0
 btmtk_process_coredump+0x2a7/0x2d0 [btmtk 03edd567dd71a65958807c95a65db31d433e1d01]
 btusb_recv_acl_mtk+0x11c/0x1a0 [btusb 675430d1e87c4f24d0c1f80efe600757a0f32bec]
 btusb_rx_work+0x9e/0xe0 [btusb 675430d1e87c4f24d0c1f80efe600757a0f32bec]
 worker_thread+0xe44/0x2cc0
 kthread+0x2ff/0x3a0
 ret_from_fork+0x51/0x80
 ret_from_fork_asm+0x1b/0x30
 

Allocated by task 82:
 stack_trace_save+0xdc/0x190
 kasan_set_track+0x4e/0x80
 __kasan_slab_alloc+0x4e/0x60
 kmem_cache_alloc+0x19f/0x360
 skb_clone+0x132/0xf70
 btusb_recv_acl_mtk+0x104/0x1a0 [btusb]
 btusb_rx_work+0x9e/0xe0 [btusb]
 worker_thread+0xe44/0x2cc0
 kthread+0x2ff/0x3a0
 ret_from_fork+0x51/0x80
 ret_from_fork_asm+0x1b/0x30

Freed by task 1733:
 stack_trace_save+0xdc/0x190
 kasan_set_track+0x4e/0x80
 kasan_save_free_info+0x28/0xb0
 ____kasan_slab_free+0xfd/0x170
 kmem_cache_free+0x183/0x3f0
 hci_devcd_rx+0x91a/0x2060 [bluetooth]
 worker_thread+0xe44/0x2cc0
 kthread+0x2ff/0x3a0
 ret_from_fork+0x51/0x80
 ret_from_fork_asm+0x1b/0x30

The buggy address belongs to the object at ffff888033cfab40
 which belongs to the cache skbuff_head_cache of size 232
The buggy address is located 112 bytes inside of
 freed 232-byte region [ffff888033cfab40, ffff888033cfac28)

The buggy address belongs to the physical page:
page:00000000a174ba93 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x33cfa
head:00000000a174ba93 order:1 entire_mapcount:0 nr_pages_mapped:0 pincount:0
anon flags: 0x4000000000000840(slab|head|zone=1)
page_type: 0xffffffff()
raw: 4000000000000840 ffff888100848a00 0000000000000000 0000000000000001
raw: 0000000000000000 0000000080190019 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff888033cfaa80: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc
 ffff888033cfab00: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
>ffff888033cfab80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                     ^
 ffff888033cfac00: fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc
 ffff888033cfac80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================

Check if we need to call hci_devcd_complete before calling
hci_devcd_append. That requires that we check data->cd_info.cnt >=
MTK_COREDUMP_NUM instead of data->cd_info.cnt > MTK_COREDUMP_NUM, as we
increment data->cd_info.cnt only once the call to hci_devcd_append
succeeds.

Fixes: 0b7015132878 ("Bluetooth: btusb: mediatek: add MediaTek devcoredump support")
Signed-off-by: Thadeu Lima de Souza Cascardo 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Sasha Levin

Bluetooth: Set quirks for ATS2851

2024-12-14T19:00:09+00:00

[ Upstream commit 677a55ba11a82c2835550a82324cec5fcb2f9e2d ]

This adds quirks for broken ats2851 features.

Signed-off-by: Danil Pylaev 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Sasha Levin

Bluetooth: btusb: Add RTL8852BE device 0489:e123 to device tables

2024-12-14T19:00:08+00:00

[ Upstream commit 69b84ffce260ff13826dc10aeb3c3e5c2288a552 ]

Add the support ID 0489:e123 to usb_device_id table for
Realtek RTL8852B chip.

The device info from /sys/kernel/debug/usb/devices as below.

T:  Bus=01 Lev=01 Prnt=01 Port=07 Cnt=04 Dev#=  7 Spd=12   MxCh= 0
D:  Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0489 ProdID=e123 Rev= 0.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Radio
S:  SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: Hilda Wu 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Sasha Levin

Bluetooth: btintel: Direct exception event to bluetooth stack

2024-11-22T14:38:32+00:00

[ Upstream commit d5359a7f583ab9b7706915213b54deac065bcb81 ]

Have exception event part of HCI traces which helps for debug.

snoop traces:
> HCI Event: Vendor (0xff) plen 79
        Vendor Prefix (0x8780)
      Intel Extended Telemetry (0x03)
        Unknown extended telemetry event type (0xde)
        01 01 de
        Unknown extended subevent 0x07
        01 01 de 07 01 de 06 1c ef be ad de ef be ad de
        ef be ad de ef be ad de ef be ad de ef be ad de
        ef be ad de 05 14 ef be ad de ef be ad de ef be
        ad de ef be ad de ef be ad de 43 10 ef be ad de
        ef be ad de ef be ad de ef be ad de

Fixes: af395330abed ("Bluetooth: btintel: Add Intel devcoredump support")
Signed-off-by: Kiran K 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Sasha Levin

Bluetooth: btusb: Fix regression with fake CSR controllers 0a12:0001

2024-10-22T13:46:31+00:00

commit 2c1dda2acc4192d826e84008d963b528e24d12bc upstream.

Fake CSR controllers don't seem to handle short-transfer properly which
cause command to time out:

kernel: usb 1-1: new full-speed USB device number 19 using xhci_hcd
kernel: usb 1-1: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91
kernel: usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
kernel: usb 1-1: Product: BT DONGLE10
...
Bluetooth: hci1: Opcode 0x1004 failed: -110
kernel: Bluetooth: hci1: command 0x1004 tx timeout

According to USB Spec 2.0 Section 5.7.3 Interrupt Transfer Packet Size
Constraints a interrupt transfer is considered complete when the size is 0
(ZPL) or < wMaxPacketSize:

 'When an interrupt transfer involves more data than can fit in one
 data payload of the currently established maximum size, all data
 payloads are required to be maximum-sized except for the last data
 payload, which will contain the remaining data. An interrupt transfer
 is complete when the endpoint does one of the following:

 • Has transferred exactly the amount of data expected
 • Transfers a packet with a payload size less than wMaxPacketSize or
 transfers a zero-length packet'

Link: https://bugzilla.kernel.org/show_bug.cgi?id=219365
Fixes: 7b05933340f4 ("Bluetooth: btusb: Fix not handling ZPL/short-transfer")
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: btrtl: Set msft ext address filter quirk for RTL8852B

2024-10-10T09:57:24+00:00

[ Upstream commit 9a0570948c5def5c59e588dc0e009ed850a1f5a1 ]

For tracking multiple devices concurrently with a condition.
The patch enables the HCI_QUIRK_USE_MSFT_EXT_ADDRESS_FILTER quirk
on RTL8852B controller.

The quirk setting is based on commit 9e14606d8f38 ("Bluetooth: msft:
Extended monitor tracking by address filter")

With this setting, when a pattern monitor detects a device, this
feature issues an address monitor for tracking that device. Let the
original pattern monitor keep monitor new devices.

Signed-off-by: Hilda Wu 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Sasha Levin

Bluetooth: btusb: Add Realtek RTL8852C support ID 0x0489:0xe122

2024-10-10T09:57:24+00:00

[ Upstream commit bdf9557f70e7512bb2f754abf90d9e9958745316 ]

Add the support ID (0x0489, 0xe122) to usb_device_id table for
Realtek RTL8852C.

The device info from /sys/kernel/debug/usb/devices as below.

T:  Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#=  2 Spd=12   MxCh= 0
D:  Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0489 ProdID=e122 Rev= 0.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Radio
S:  SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: Hilda Wu 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Sasha Levin

Bluetooth: btmrvl: Use IRQF_NO_AUTOEN flag in request_irq()

2024-10-10T09:57:16+00:00

[ Upstream commit 7b1ab460592ca818e7b52f27cd3ec86af79220d1 ]

disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.

Fixes: bb7f4f0bcee6 ("btmrvl: add platform specific wakeup interrupt support")
Signed-off-by: Jinjie Ruan 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Sasha Levin

Bluetooth: btusb: Fix not handling ZPL/short-transfer

2024-10-04T14:28:58+00:00

[ Upstream commit 7b05933340f4490ef5b09e84d644d12484b05fdf ]

Requesting transfers of the exact same size of wMaxPacketSize may result
in ZPL/short-transfer since the USB stack cannot handle it as we are
limiting the buffer size to be the same as wMaxPacketSize.

Also, in terms of throughput this change has the same effect to
interrupt endpoint as 290ba200815f "Bluetooth: Improve USB driver throughput
by increasing the frame size" had for the bulk endpoint, so users of the
advertisement bearer (e.g. BT Mesh) may benefit from this change.

Fixes: 5e23b923da03 ("[Bluetooth] Add generic driver for Bluetooth USB devices")
Signed-off-by: Luiz Augusto von Dentz 
Tested-by: Kiran K 
Signed-off-by: Sasha Levin

Bluetooth: btnxpuart: Fix Null pointer dereference in btnxpuart_flush()

2024-09-12T09:11:38+00:00

[ Upstream commit c68bbf5e334b35b36ac5b9f0419f1f93f796bad1 ]

This adds a check before freeing the rx->skb in flush and close
functions to handle the kernel crash seen while removing driver after FW
download fails or before FW download completes.

dmesg log:
[   54.634586] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000080
[   54.643398] Mem abort info:
[   54.646204]   ESR = 0x0000000096000004
[   54.649964]   EC = 0x25: DABT (current EL), IL = 32 bits
[   54.655286]   SET = 0, FnV = 0
[   54.658348]   EA = 0, S1PTW = 0
[   54.661498]   FSC = 0x04: level 0 translation fault
[   54.666391] Data abort info:
[   54.669273]   ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[   54.674768]   CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[   54.674771]   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[   54.674775] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000048860000
[   54.674780] [0000000000000080] pgd=0000000000000000, p4d=0000000000000000
[   54.703880] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[   54.710152] Modules linked in: btnxpuart(-) overlay fsl_jr_uio caam_jr caamkeyblob_desc caamhash_desc caamalg_desc crypto_engine authenc libdes crct10dif_ce polyval_ce polyval_generic snd_soc_imx_spdif snd_soc_imx_card snd_soc_ak5558 snd_soc_ak4458 caam secvio error snd_soc_fsl_micfil snd_soc_fsl_spdif snd_soc_fsl_sai snd_soc_fsl_utils imx_pcm_dma gpio_ir_recv rc_core sch_fq_codel fuse
[   54.744357] CPU: 3 PID: 72 Comm: kworker/u9:0 Not tainted 6.6.3-otbr-g128004619037 #2
[   54.744364] Hardware name: FSL i.MX8MM EVK board (DT)
[   54.744368] Workqueue: hci0 hci_power_on
[   54.757244] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   54.757249] pc : kfree_skb_reason+0x18/0xb0
[   54.772299] lr : btnxpuart_flush+0x40/0x58 [btnxpuart]
[   54.782921] sp : ffff8000805ebca0
[   54.782923] x29: ffff8000805ebca0 x28: ffffa5c6cf1869c0 x27: ffffa5c6cf186000
[   54.782931] x26: ffff377b84852400 x25: ffff377b848523c0 x24: ffff377b845e7230
[   54.782938] x23: ffffa5c6ce8dbe08 x22: ffffa5c6ceb65410 x21: 00000000ffffff92
[   54.782945] x20: ffffa5c6ce8dbe98 x19: ffffffffffffffac x18: ffffffffffffffff
[   54.807651] x17: 0000000000000000 x16: ffffa5c6ce2824ec x15: ffff8001005eb857
[   54.821917] x14: 0000000000000000 x13: ffffa5c6cf1a02e0 x12: 0000000000000642
[   54.821924] x11: 0000000000000040 x10: ffffa5c6cf19d690 x9 : ffffa5c6cf19d688
[   54.821931] x8 : ffff377b86000028 x7 : 0000000000000000 x6 : 0000000000000000
[   54.821938] x5 : ffff377b86000000 x4 : 0000000000000000 x3 : 0000000000000000
[   54.843331] x2 : 0000000000000000 x1 : 0000000000000002 x0 : ffffffffffffffac
[   54.857599] Call trace:
[   54.857601]  kfree_skb_reason+0x18/0xb0
[   54.863878]  btnxpuart_flush+0x40/0x58 [btnxpuart]
[   54.863888]  hci_dev_open_sync+0x3a8/0xa04
[   54.872773]  hci_power_on+0x54/0x2e4
[   54.881832]  process_one_work+0x138/0x260
[   54.881842]  worker_thread+0x32c/0x438
[   54.881847]  kthread+0x118/0x11c
[   54.881853]  ret_from_fork+0x10/0x20
[   54.896406] Code: a9be7bfd 910003fd f9000bf3 aa0003f3 (b940d400)
[   54.896410] ---[ end trace 0000000000000000 ]---

Signed-off-by: Neeraj Sanjay Kale 
Tested-by: Guillaume Legoupil 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Sasha Levin