linux-stable.git/drivers/bluetooth, branch v6.6.26

Bluetooth: qca: fix device-address endianness

2024-04-10T14:35:48+00:00

commit 77f45cca8bc55d00520a192f5a7715133591c83e upstream.

The WCN6855 firmware on the Lenovo ThinkPad X13s expects the Bluetooth
device address in big-endian order when setting it using the
EDL_WRITE_BD_ADDR_OPCODE command.

Presumably, this is the case for all non-ROME devices which all use the
EDL_WRITE_BD_ADDR_OPCODE command for this (unlike the ROME devices which
use a different command and expect the address in little-endian order).

Reverse the little-endian address before setting it to make sure that
the address can be configured using tools like btmgmt or using the
'local-bd-address' devicetree property.

Note that this can potentially break systems with boot firmware which
has started relying on the broken behaviour and is incorrectly passing
the address via devicetree in big-endian order.

The only device affected by this should be the WCN3991 used in some
Chromebooks. As ChromeOS updates the kernel and devicetree in lockstep,
the new 'qcom,local-bd-address-broken' property can be used to determine
if the firmware is buggy so that the underlying driver bug can be fixed
without breaking backwards compatibility.

Set the HCI_QUIRK_BDADDR_PROPERTY_BROKEN quirk for such platforms so
that the address is reversed when parsing the address property.

Fixes: 5c0a1001c8be ("Bluetooth: hci_qca: Add helper to set device address")
Cc: stable@vger.kernel.org      # 5.1
Cc: Balakrishna Godavarthi 
Cc: Matthias Kaehlcke 
Tested-by: Nikita Travkin  # sc7180
Reviewed-by: Douglas Anderson 
Signed-off-by: Johan Hovold 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Greg Kroah-Hartman

Revert "Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT"

2024-04-10T14:35:48+00:00

commit 4790a73ace86f3d165bbedba898e0758e6e1b82d upstream.

This reverts commit 7dcd3e014aa7faeeaf4047190b22d8a19a0db696.

Qualcomm Bluetooth controllers like WCN6855 do not have persistent
storage for the Bluetooth address and must therefore start as
unconfigured to allow the user to set a valid address unless one has
been provided by the boot firmware in the devicetree.

A recent change snuck into v6.8-rc7 and incorrectly started marking the
default (non-unique) address as valid. This specifically also breaks the
Bluetooth setup for some user of the Lenovo ThinkPad X13s.

Note that this is the second time Qualcomm breaks the driver this way
and that this was fixed last year by commit 6945795bc81a ("Bluetooth:
fix use-bdaddr-property quirk"), which also has some further details.

Fixes: 7dcd3e014aa7 ("Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT")
Cc: stable@vger.kernel.org      # 6.8
Cc: Janaki Ramaiah Thota 
Signed-off-by: Johan Hovold 
Reported-by: Clayton Craft 
Tested-by: Clayton Craft 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: btnxpuart: Fix btnxpuart_close

2024-04-03T13:28:27+00:00

[ Upstream commit 664130c0b0309b360bc5bdd40a30604a9387bde8 ]

Fix scheduling while atomic BUG in btnxpuart_close(), properly
purge the transmit queue and free the receive skb.

[   10.973809] BUG: scheduling while atomic: kworker/u9:0/80/0x00000002
...
[   10.980740] CPU: 3 PID: 80 Comm: kworker/u9:0 Not tainted 6.8.0-rc7-0.0.0-devel-00005-g61fdfceacf09 #1
[   10.980751] Hardware name: Toradex Verdin AM62 WB on Dahlia Board (DT)
[   10.980760] Workqueue: hci0 hci_power_off [bluetooth]
[   10.981169] Call trace:
...
[   10.981363]  uart_update_mctrl+0x58/0x78
[   10.981373]  uart_dtr_rts+0x104/0x114
[   10.981381]  tty_port_shutdown+0xd4/0xdc
[   10.981396]  tty_port_close+0x40/0xbc
[   10.981407]  uart_close+0x34/0x9c
[   10.981414]  ttyport_close+0x50/0x94
[   10.981430]  serdev_device_close+0x40/0x50
[   10.981442]  btnxpuart_close+0x24/0x98 [btnxpuart]
[   10.981469]  hci_dev_close_sync+0x2d8/0x718 [bluetooth]
[   10.981728]  hci_dev_do_close+0x2c/0x70 [bluetooth]
[   10.981862]  hci_power_off+0x20/0x64 [bluetooth]

Fixes: 689ca16e5232 ("Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets")
Cc: stable@vger.kernel.org
Signed-off-by: Marcel Ziswiler 
Reviewed-by: Neeraj Sanjay Kale 
Signed-off-by: Francesco Dolcini 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Sasha Levin

Bluetooth: btusb: Fix memory leak

2024-03-26T22:19:38+00:00

[ Upstream commit 79f4127a502c5905f04da1f20a7bbe07103fb77c ]

This checks if CONFIG_DEV_COREDUMP is enabled before attempting to clone
the skb and also make sure btmtk_process_coredump frees the skb passed
following the same logic.

Fixes: 0b7015132878 ("Bluetooth: btusb: mediatek: add MediaTek devcoredump support")
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Sasha Levin

Bluetooth: btrtl: fix out of bounds memory access

2024-03-26T22:19:38+00:00

[ Upstream commit de4e88ec58c4202efd1f02eebb4939bbf6945358 ]

The problem is detected by KASAN.
btrtl driver uses private hci data to store 'struct btrealtek_data'.
If btrtl driver is used with btusb, then memory for private hci data
is allocated in btusb. But no private data is allocated after hci_dev,
when btrtl is used with hci_h5.

This commit adds memory allocation for hci_h5 case.

 ==================================================================
 BUG: KASAN: slab-out-of-bounds in btrtl_initialize+0x6cc/0x958 [btrtl]
 Write of size 8 at addr ffff00000f5a5748 by task kworker/u9:0/76

 Hardware name: Pine64 PinePhone (1.2) (DT)
 Workqueue: hci0 hci_power_on [bluetooth]
 Call trace:
  dump_backtrace+0x9c/0x128
  show_stack+0x20/0x38
  dump_stack_lvl+0x48/0x60
  print_report+0xf8/0x5d8
  kasan_report+0x90/0xd0
  __asan_store8+0x9c/0xc0
  	 [btrtl]
  h5_btrtl_setup+0xd0/0x2f8 [hci_uart]
  h5_setup+0x50/0x80 [hci_uart]
  hci_uart_setup+0xd4/0x260 [hci_uart]
  hci_dev_open_sync+0x1cc/0xf68 [bluetooth]
  hci_dev_do_open+0x34/0x90 [bluetooth]
  hci_power_on+0xc4/0x3c8 [bluetooth]
  process_one_work+0x328/0x6f0
  worker_thread+0x410/0x778
  kthread+0x168/0x178
  ret_from_fork+0x10/0x20

 Allocated by task 53:
  kasan_save_stack+0x3c/0x68
  kasan_save_track+0x20/0x40
  kasan_save_alloc_info+0x68/0x78
  __kasan_kmalloc+0xd4/0xd8
  __kmalloc+0x1b4/0x3b0
  hci_alloc_dev_priv+0x28/0xa58 [bluetooth]
  hci_uart_register_device+0x118/0x4f8 [hci_uart]
  h5_serdev_probe+0xf4/0x178 [hci_uart]
  serdev_drv_probe+0x54/0xa0
  really_probe+0x254/0x588
  __driver_probe_device+0xc4/0x210
  driver_probe_device+0x64/0x160
  __driver_attach_async_helper+0x88/0x158
  async_run_entry_fn+0xd0/0x388
  process_one_work+0x328/0x6f0
  worker_thread+0x410/0x778
  kthread+0x168/0x178
  ret_from_fork+0x10/0x20

 Last potentially related work creation:
  kasan_save_stack+0x3c/0x68
  __kasan_record_aux_stack+0xb0/0x150
  kasan_record_aux_stack_noalloc+0x14/0x20
  __queue_work+0x33c/0x960
  queue_work_on+0x98/0xc0
  hci_recv_frame+0xc8/0x1e8 [bluetooth]
  h5_complete_rx_pkt+0x2c8/0x800 [hci_uart]
  h5_rx_payload+0x98/0xb8 [hci_uart]
  h5_recv+0x158/0x3d8 [hci_uart]
  hci_uart_receive_buf+0xa0/0xe8 [hci_uart]
  ttyport_receive_buf+0xac/0x178
  flush_to_ldisc+0x130/0x2c8
  process_one_work+0x328/0x6f0
  worker_thread+0x410/0x778
  kthread+0x168/0x178
  ret_from_fork+0x10/0x20

 Second to last potentially related work creation:
  kasan_save_stack+0x3c/0x68
  __kasan_record_aux_stack+0xb0/0x150
  kasan_record_aux_stack_noalloc+0x14/0x20
  __queue_work+0x788/0x960
  queue_work_on+0x98/0xc0
  __hci_cmd_sync_sk+0x23c/0x7a0 [bluetooth]
  __hci_cmd_sync+0x24/0x38 [bluetooth]
  btrtl_initialize+0x760/0x958 [btrtl]
  h5_btrtl_setup+0xd0/0x2f8 [hci_uart]
  h5_setup+0x50/0x80 [hci_uart]
  hci_uart_setup+0xd4/0x260 [hci_uart]
  hci_dev_open_sync+0x1cc/0xf68 [bluetooth]
  hci_dev_do_open+0x34/0x90 [bluetooth]
  hci_power_on+0xc4/0x3c8 [bluetooth]
  process_one_work+0x328/0x6f0
  worker_thread+0x410/0x778
  kthread+0x168/0x178
  ret_from_fork+0x10/0x20
 ==================================================================

Fixes: 5b355944b190 ("Bluetooth: btrtl: Add btrealtek data struct")
Fixes: 044014ce85a1 ("Bluetooth: btrtl: Add Realtek devcoredump support")
Signed-off-by: Andrey Skvortsov 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Sasha Levin

Bluetooth: hci_h5: Add ability to allocate memory for private data

2024-03-26T22:19:38+00:00

[ Upstream commit 7a6d793e9ca8bc0c1d2f0aa0a02ec380d1124c74 ]

In some cases uart-base drivers may need to use priv data. For
example, to store information needed for devcoredump.

Fixes: 044014ce85a1 ("Bluetooth: btrtl: Add Realtek devcoredump support")
Signed-off-by: Andrey Skvortsov 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Sasha Levin

Bluetooth: hci_qca: don't use IS_ERR_OR_NULL() with gpiod_get_optional()

2024-03-26T22:19:37+00:00

[ Upstream commit 56d074d26c5828773b00b2185dd7e1d08273b8e8 ]

The optional variants for the gpiod_get() family of functions return NULL
if the GPIO in question is not associated with this device. They return
ERR_PTR() on any other error. NULL descriptors are graciously handled by
GPIOLIB and can be safely passed to any of the GPIO consumer interfaces
as they will return 0 and act as if the function succeeded. If one is
using the optional variant, then there's no point in checking for NULL.

Fixes: 6845667146a2 ("Bluetooth: hci_qca: Fix NULL vs IS_ERR_OR_NULL check in qca_serdev_probe")
Signed-off-by: Bartosz Golaszewski 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Sasha Levin

Bluetooth: hci_bcm4377: do not mark valid bd_addr as invalid

2024-03-06T14:48:39+00:00

commit c17d2a7b216e168c3ba62d93482179c01b369ac7 upstream.

A recent commit restored the original (and still documented) semantics
for the HCI_QUIRK_USE_BDADDR_PROPERTY quirk so that the device address
is considered invalid unless an address is provided by firmware.

This specifically means that this flag must only be set for devices with
invalid addresses, but the Broadcom BCM4377 driver has so far been
setting this flag unconditionally.

Fortunately the driver already checks for invalid addresses during setup
and sets the HCI_QUIRK_INVALID_BDADDR flag, which can simply be replaced
with HCI_QUIRK_USE_BDADDR_PROPERTY to indicate that the default address
is invalid but can be overridden by firmware (long term, this should
probably just always be allowed).

Fixes: 6945795bc81a ("Bluetooth: fix use-bdaddr-property quirk")
Cc: stable@vger.kernel.org      # 6.5
Reported-by: Felix Zhang 
Link: https://lore.kernel.org/r/77419ffacc5b4875e920e038332575a2a5bff29f.camel@mrman314.tech/
Signed-off-by: Johan Hovold 
Reported-by: Felix Zhang 
Reviewed-by: Neal Gompa 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: qca: Fix triggering coredump implementation

2024-03-06T14:48:36+00:00

[ Upstream commit 6abf9dd26bb1699c17d601b9a292577d01827c0e ]

hci_coredump_qca() uses __hci_cmd_sync() to send a vendor-specific command
to trigger firmware coredump, but the command does not have any event as
its sync response, so it is not suitable to use __hci_cmd_sync(), fixed by
using __hci_cmd_send().

Fixes: 06d3fdfcdf5c ("Bluetooth: hci_qca: Add qcom devcoredump support")
Signed-off-by: Zijun Hu 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Sasha Levin

Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT

2024-03-06T14:48:36+00:00

[ Upstream commit 7dcd3e014aa7faeeaf4047190b22d8a19a0db696 ]

BT adapter going into UNCONFIGURED state during BT turn ON when
devicetree has no local-bd-address node.

Bluetooth will not work out of the box on such devices, to avoid this
problem, added check to set HCI_QUIRK_USE_BDADDR_PROPERTY based on
local-bd-address node entry.

When this quirk is not set, the public Bluetooth address read by host
from controller though HCI Read BD Address command is
considered as valid.

Fixes: e668eb1e1578 ("Bluetooth: hci_core: Don't stop BT if the BD address missing in dts")
Signed-off-by: Janaki Ramaiah Thota 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Sasha Levin