linux-stable.git/drivers/bluetooth, branch v6.6.140 Linux kernel stable tree Bluetooth: virtio_bt: validate rx pkt_type header length 2026-05-17T15:13:38+00:00 Michael Bommarito michael.bommarito@gmail.com 2026-04-21T17:08:45+00:00 1e1e509b6fd2a42421745bbcd98bd16daad20904 commit daf23014e5d975e72ea9c02b5160d3fcf070ea47 upstream. virtbt_rx_handle() reads the leading pkt_type byte from the RX skb and forwards the remainder to hci_recv_frame() for every event/ACL/SCO/ISO type, without checking that the remaining payload is at least the fixed HCI header for that type. After the preceding patch bounds the backend-supplied used.len to [1, VIRTBT_RX_BUF_SIZE], a one-byte completion still reaches hci_recv_frame() with skb->len already pulled to 0. If the byte happened to be HCI_ACLDATA_PKT, the ACL-vs-ISO classification fast-path in hci_dev_classify_pkt_type() dereferences hci_acl_hdr(skb)->handle whenever the HCI device has an active CIS_LINK, BIS_LINK, or PA_LINK connection, reading two bytes of uninitialized RX-buffer data. The same hazard exists for every packet type the driver accepts because none of the switch cases in virtbt_rx_handle() check skb->len against the per-type minimum HCI header size before handing the frame to the core. After stripping pkt_type, require skb->len to cover the fixed header size for the selected type (event 2, ACL 4, SCO 3, ISO 4) before calling hci_recv_frame(); drop ratelimited otherwise. Unknown pkt_type values still take the original kfree_skb() default path. Use bt_dev_err_ratelimited() because both the length and pkt_type values come from an untrusted backend that can otherwise flood the kernel log. Fixes: 160fbcf3bfb9 ("Bluetooth: virtio_bt: Use skb_put to set length") Cc: stable@vger.kernel.org Cc: Soenke Huster <soenke.huster@eknoes.de> Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com> Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit daf23014e5d975e72ea9c02b5160d3fcf070ea47 upstream.

virtbt_rx_handle() reads the leading pkt_type byte from the RX skb
and forwards the remainder to hci_recv_frame() for every
event/ACL/SCO/ISO type, without checking that the remaining payload
is at least the fixed HCI header for that type.

After the preceding patch bounds the backend-supplied used.len to
[1, VIRTBT_RX_BUF_SIZE], a one-byte completion still reaches
hci_recv_frame() with skb->len already pulled to 0. If the byte
happened to be HCI_ACLDATA_PKT, the ACL-vs-ISO classification
fast-path in hci_dev_classify_pkt_type() dereferences
hci_acl_hdr(skb)->handle whenever the HCI device has an active
CIS_LINK, BIS_LINK, or PA_LINK connection, reading two bytes of
uninitialized RX-buffer data. The same hazard exists for every
packet type the driver accepts because none of the switch cases in
virtbt_rx_handle() check skb->len against the per-type minimum HCI
header size before handing the frame to the core.

After stripping pkt_type, require skb->len to cover the fixed
header size for the selected type (event 2, ACL 4, SCO 3, ISO 4)
before calling hci_recv_frame(); drop ratelimited otherwise.
Unknown pkt_type values still take the original kfree_skb() default
path.

Use bt_dev_err_ratelimited() because both the length and pkt_type
values come from an untrusted backend that can otherwise flood the
kernel log.

Fixes: 160fbcf3bfb9 ("Bluetooth: virtio_bt: Use skb_put to set length")
Cc: stable@vger.kernel.org
Cc: Soenke Huster <soenke.huster@eknoes.de>
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bluetooth: virtio_bt: clamp rx length before skb_put 2026-05-17T15:13:38+00:00 Michael Bommarito michael.bommarito@gmail.com 2026-04-21T17:08:44+00:00 ed41c81d30b211a671667259c3b5feeba0e062d5 commit 21bd244b6de5d2fe1063c23acc93fbdd2b20d112 upstream. virtbt_rx_work() calls skb_put(skb, len) where len comes directly from virtqueue_get_buf() with no validation against the buffer we posted to the device. The RX skb is allocated in virtbt_add_inbuf() and exposed to virtio as exactly 1000 bytes via sg_init_one(). Checking len against skb_tailroom(skb) is not sufficient because alloc_skb() can leave more tailroom than the 1000 bytes actually handed to the device. A malicious or buggy backend can therefore report used.len between 1001 and skb_tailroom(skb), causing skb_put() to include uninitialized kernel heap bytes that were never written by the device. The same path also accepts len == 0, in which case skb_put(skb, 0) leaves the skb empty but virtbt_rx_handle() still reads the pkt_type byte from skb->data, consuming uninitialized memory. Define VIRTBT_RX_BUF_SIZE once and reuse it in alloc_skb() and sg_init_one(), and gate virtbt_rx_work() on that same constant so the bound checked matches the buffer actually exposed to the device. Reject used.len == 0 in the same gate so an empty completion can no longer reach virtbt_rx_handle(). Use bt_dev_err_ratelimited() because the length value comes from an untrusted backend that can otherwise flood the kernel log. Same class of bug as commit c04db81cd028 ("net/9p: Fix buffer overflow in USB transport layer"), which hardened the USB 9p transport against unchecked device-reported length. Fixes: 160fbcf3bfb9 ("Bluetooth: virtio_bt: Use skb_put to set length") Cc: stable@vger.kernel.org Cc: Soenke Huster <soenke.huster@eknoes.de> Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com> Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 21bd244b6de5d2fe1063c23acc93fbdd2b20d112 upstream.

virtbt_rx_work() calls skb_put(skb, len) where len comes directly
from virtqueue_get_buf() with no validation against the buffer we
posted to the device. The RX skb is allocated in virtbt_add_inbuf()
and exposed to virtio as exactly 1000 bytes via sg_init_one().

Checking len against skb_tailroom(skb) is not sufficient because
alloc_skb() can leave more tailroom than the 1000 bytes actually
handed to the device. A malicious or buggy backend can therefore
report used.len between 1001 and skb_tailroom(skb), causing skb_put()
to include uninitialized kernel heap bytes that were never written by
the device.

The same path also accepts len == 0, in which case skb_put(skb, 0)
leaves the skb empty but virtbt_rx_handle() still reads the pkt_type
byte from skb->data, consuming uninitialized memory.

Define VIRTBT_RX_BUF_SIZE once and reuse it in alloc_skb() and
sg_init_one(), and gate virtbt_rx_work() on that same constant so
the bound checked matches the buffer actually exposed to the device.
Reject used.len == 0 in the same gate so an empty completion can
no longer reach virtbt_rx_handle().

Use bt_dev_err_ratelimited() because the length value comes from an
untrusted backend that can otherwise flood the kernel log.

Same class of bug as commit c04db81cd028 ("net/9p: Fix buffer
overflow in USB transport layer"), which hardened the USB 9p
transport against unchecked device-reported length.

Fixes: 160fbcf3bfb9 ("Bluetooth: virtio_bt: Use skb_put to set length")
Cc: stable@vger.kernel.org
Cc: Soenke Huster <soenke.huster@eknoes.de>
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bluetooth: btusb: clamp SCO altsetting table indices 2026-04-02T11:07:20+00:00 Pengpeng Hou pengpeng@iscas.ac.cn 2026-03-25T00:42:45+00:00 6fba3c3d48c927e55611a0f5ea34da88138ed0ff [ Upstream commit 129fa608b6ad08b8ab7178eeb2ec272c993aaccc ] btusb_work() maps the number of active SCO links to USB alternate settings through a three-entry lookup table when CVSD traffic uses transparent voice settings. The lookup currently indexes alts[] with data->sco_num - 1 without first constraining sco_num to the number of available table entries. While the table only defines alternate settings for up to three SCO links, data->sco_num comes from hci_conn_num() and is used directly. Cap the lookup to the last table entry before indexing it so the driver keeps selecting the highest supported alternate setting without reading past alts[]. Fixes: baac6276c0a9 ("Bluetooth: btusb: handle mSBC audio over USB Endpoints") Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 129fa608b6ad08b8ab7178eeb2ec272c993aaccc ]

btusb_work() maps the number of active SCO links to USB alternate
settings through a three-entry lookup table when CVSD traffic uses
transparent voice settings. The lookup currently indexes alts[] with
data->sco_num - 1 without first constraining sco_num to the number of
available table entries.

While the table only defines alternate settings for up to three SCO
links, data->sco_num comes from hci_conn_num() and is used directly.
Cap the lookup to the last table entry before indexing it so the
driver keeps selecting the highest supported alternate setting without
reading past alts[].

Fixes: baac6276c0a9 ("Bluetooth: btusb: handle mSBC audio over USB Endpoints")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bluetooth: btintel: serialize btintel_hw_error() with hci_req_sync_lock 2026-04-02T11:07:20+00:00 Cen Zhang zzzccc427@gmail.com 2026-03-18T12:54:03+00:00 5f84e845648dfa86e42de5487f1a774b42f0444d [ Upstream commit 94d8e6fe5d0818e9300e514e095a200bd5ff93ae ] btintel_hw_error() issues two __hci_cmd_sync() calls (HCI_OP_RESET and Intel exception-info retrieval) without holding hci_req_sync_lock(). This lets it race against hci_dev_do_close() -> btintel_shutdown_combined(), which also runs __hci_cmd_sync() under the same lock. When both paths manipulate hdev->req_status/req_rsp concurrently, the close path may free the response skb first, and the still-running hw_error path hits a slab-use-after-free in kfree_skb(). Wrap the whole recovery sequence in hci_req_sync_lock/unlock so it is serialized with every other synchronous HCI command issuer. Below is the data race report and the kasan report: BUG: data-race in __hci_cmd_sync_sk / btintel_shutdown_combined read of hdev->req_rsp at net/bluetooth/hci_sync.c:199 by task kworker/u17:1/83: __hci_cmd_sync_sk+0x12f2/0x1c30 net/bluetooth/hci_sync.c:200 __hci_cmd_sync+0x55/0x80 net/bluetooth/hci_sync.c:223 btintel_hw_error+0x114/0x670 drivers/bluetooth/btintel.c:254 hci_error_reset+0x348/0xa30 net/bluetooth/hci_core.c:1030 write/free by task ioctl/22580: btintel_shutdown_combined+0xd0/0x360 drivers/bluetooth/btintel.c:3648 hci_dev_close_sync+0x9ae/0x2c10 net/bluetooth/hci_sync.c:5246 hci_dev_do_close+0x232/0x460 net/bluetooth/hci_core.c:526 BUG: KASAN: slab-use-after-free in sk_skb_reason_drop+0x43/0x380 net/core/skbuff.c:1202 Read of size 4 at addr ffff888144a738dc by task kworker/u17:1/83: __hci_cmd_sync_sk+0x12f2/0x1c30 net/bluetooth/hci_sync.c:200 __hci_cmd_sync+0x55/0x80 net/bluetooth/hci_sync.c:223 btintel_hw_error+0x186/0x670 drivers/bluetooth/btintel.c:260 Fixes: 973bb97e5aee ("Bluetooth: btintel: Add generic function for handling hardware errors") Signed-off-by: Cen Zhang <zzzccc427@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 94d8e6fe5d0818e9300e514e095a200bd5ff93ae ]

btintel_hw_error() issues two __hci_cmd_sync() calls (HCI_OP_RESET
and Intel exception-info retrieval) without holding
hci_req_sync_lock().  This lets it race against
hci_dev_do_close() -> btintel_shutdown_combined(), which also runs
__hci_cmd_sync() under the same lock.  When both paths manipulate
hdev->req_status/req_rsp concurrently, the close path may free the
response skb first, and the still-running hw_error path hits a
slab-use-after-free in kfree_skb().

Wrap the whole recovery sequence in hci_req_sync_lock/unlock so it
is serialized with every other synchronous HCI command issuer.

Below is the data race report and the kasan report:

  BUG: data-race in __hci_cmd_sync_sk / btintel_shutdown_combined

  read of hdev->req_rsp at net/bluetooth/hci_sync.c:199
  by task kworker/u17:1/83:
   __hci_cmd_sync_sk+0x12f2/0x1c30 net/bluetooth/hci_sync.c:200
   __hci_cmd_sync+0x55/0x80 net/bluetooth/hci_sync.c:223
   btintel_hw_error+0x114/0x670 drivers/bluetooth/btintel.c:254
   hci_error_reset+0x348/0xa30 net/bluetooth/hci_core.c:1030

  write/free by task ioctl/22580:
   btintel_shutdown_combined+0xd0/0x360
    drivers/bluetooth/btintel.c:3648
   hci_dev_close_sync+0x9ae/0x2c10 net/bluetooth/hci_sync.c:5246
   hci_dev_do_close+0x232/0x460 net/bluetooth/hci_core.c:526

  BUG: KASAN: slab-use-after-free in
   sk_skb_reason_drop+0x43/0x380 net/core/skbuff.c:1202
  Read of size 4 at addr ffff888144a738dc
  by task kworker/u17:1/83:
   __hci_cmd_sync_sk+0x12f2/0x1c30 net/bluetooth/hci_sync.c:200
   __hci_cmd_sync+0x55/0x80 net/bluetooth/hci_sync.c:223
   btintel_hw_error+0x186/0x670 drivers/bluetooth/btintel.c:260

Fixes: 973bb97e5aee ("Bluetooth: btintel: Add generic function for handling hardware errors")
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bluetooth: hci_ll: Fix firmware leak on error path 2026-04-02T11:07:17+00:00 Anas Iqbal mohd.abd.6602@gmail.com 2026-03-15T10:51:37+00:00 28904375d54b436a757641fb0331537778c0de5a [ Upstream commit 31148a7be723aa9f2e8fbd62424825ab8d577973 ] Smatch reports: drivers/bluetooth/hci_ll.c:587 download_firmware() warn: 'fw' from request_firmware() not released on lines: 544. In download_firmware(), if request_firmware() succeeds but the returned firmware content is invalid (no data or zero size), the function returns without releasing the firmware, resulting in a resource leak. Fix this by calling release_firmware() before returning when request_firmware() succeeded but the firmware content is invalid. Fixes: 371805522f87 ("bluetooth: hci_uart: add LL protocol serdev driver support") Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Anas Iqbal <mohd.abd.6602@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 31148a7be723aa9f2e8fbd62424825ab8d577973 ]

Smatch reports:

drivers/bluetooth/hci_ll.c:587 download_firmware() warn:
'fw' from request_firmware() not released on lines: 544.

In download_firmware(), if request_firmware() succeeds but the returned
firmware content is invalid (no data or zero size), the function returns
without releasing the firmware, resulting in a resource leak.

Fix this by calling release_firmware() before returning when
request_firmware() succeeded but the firmware content is invalid.

Fixes: 371805522f87 ("bluetooth: hci_uart: add LL protocol serdev driver support")
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Anas Iqbal <mohd.abd.6602@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bluetooth: qca: fix ROM version reading on WCN3998 chips 2026-03-25T10:06:06+00:00 Dmitry Baryshkov dmitry.baryshkov@oss.qualcomm.com 2026-03-10T23:02:57+00:00 e160b869b0a89245ec7b0d18e3b2cf5c969aef16 [ Upstream commit 99b2c531e0e797119ae1b9195a8764ee98b00e65 ] WCN3998 uses a bit different format for rom version: [ 5.479978] Bluetooth: hci0: setting up wcn399x [ 5.633763] Bluetooth: hci0: QCA Product ID :0x0000000a [ 5.645350] Bluetooth: hci0: QCA SOC Version :0x40010224 [ 5.650906] Bluetooth: hci0: QCA ROM Version :0x00001001 [ 5.665173] Bluetooth: hci0: QCA Patch Version:0x00006699 [ 5.679356] Bluetooth: hci0: QCA controller version 0x02241001 [ 5.691109] Bluetooth: hci0: QCA Downloading qca/crbtfw21.tlv [ 6.680102] Bluetooth: hci0: QCA Downloading qca/crnv21.bin [ 6.842948] Bluetooth: hci0: QCA setup on UART is completed Fixes: 523760b7ff88 ("Bluetooth: hci_qca: Added support for WCN3998") Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 99b2c531e0e797119ae1b9195a8764ee98b00e65 ]

WCN3998 uses a bit different format for rom version:

[    5.479978] Bluetooth: hci0: setting up wcn399x
[    5.633763] Bluetooth: hci0: QCA Product ID   :0x0000000a
[    5.645350] Bluetooth: hci0: QCA SOC Version  :0x40010224
[    5.650906] Bluetooth: hci0: QCA ROM Version  :0x00001001
[    5.665173] Bluetooth: hci0: QCA Patch Version:0x00006699
[    5.679356] Bluetooth: hci0: QCA controller version 0x02241001
[    5.691109] Bluetooth: hci0: QCA Downloading qca/crbtfw21.tlv
[    6.680102] Bluetooth: hci0: QCA Downloading qca/crnv21.bin
[    6.842948] Bluetooth: hci0: QCA setup on UART is completed

Fixes: 523760b7ff88 ("Bluetooth: hci_qca: Added support for WCN3998")
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bluetooth: hci_qca: Cleanup on all setup failures 2026-03-04T12:21:00+00:00 Jinwang Li jinwang.li@oss.qualcomm.com 2026-02-05T06:26:00+00:00 1d93a369b5aa8ffc8b48239bcba9e222b6a14ad7 [ Upstream commit 5c4e9a8b18457ad28b57069ef0f14661e3192b2e ] The setup process previously combined error handling and retry gating under one condition. As a result, the final failed attempt exited without performing cleanup. Update the failure path to always perform power and port cleanup on setup failure, and reopen the port only when retrying. Fixes: 9e80587aba4c ("Bluetooth: hci_qca: Enhance retry logic in qca_setup") Signed-off-by: Jinwang Li <jinwang.li@oss.qualcomm.com> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 5c4e9a8b18457ad28b57069ef0f14661e3192b2e ]

The setup process previously combined error handling and retry gating
under one condition. As a result, the final failed attempt exited
without performing cleanup.

Update the failure path to always perform power and port cleanup on
setup failure, and reopen the port only when retrying.

Fixes: 9e80587aba4c ("Bluetooth: hci_qca: Enhance retry logic in qca_setup")
Signed-off-by: Jinwang Li <jinwang.li@oss.qualcomm.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bluetooth: btusb: Add device ID for Realtek RTL8761BU 2026-03-04T12:20:48+00:00 Jacopo Scannella code@charlie.cat 2026-01-20T09:13:04+00:00 37f4e6804d98256150673f506dc3f76c6a611bba [ Upstream commit cc6383d4f0cf6127c0552f94cae517a06ccc6b17 ] Add USB device ID 0x2c0a:0x8761 to the btusb driver fo the Realtek RTL8761BU Bluetooth adapter. Reference: https://www.startech.com/en-us/networking-io/av53c1-usb-bluetooth Signed-off-by: Jacopo Scannella <code@charlie.cat> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit cc6383d4f0cf6127c0552f94cae517a06ccc6b17 ]

Add USB device ID 0x2c0a:0x8761 to the btusb driver fo the Realtek
RTL8761BU Bluetooth adapter.

Reference:
https://www.startech.com/en-us/networking-io/av53c1-usb-bluetooth

Signed-off-by: Jacopo Scannella <code@charlie.cat>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bluetooth: btusb: Add new VID/PID for RTL8852CE 2026-03-04T12:20:48+00:00 Shell Chen w27@sorz.org 2026-01-14T04:03:35+00:00 c051ef2f61f4636b16f99dea025012695c2790f8 [ Upstream commit d9f7c39c6b7548bd70519b241b6c2d1bcc658d4b ] Add VID:PID 13d3:3612 to the quirks_table. This ID pair is found in the Realtek RTL8852CE PCIe module in an ASUS TUF A14 2025 (FA401KM) laptop. Tested on aforementioned laptop. The device info from /sys/kernel/debug/usb/devices is listed as below. T: Bus=03 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3612 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms Signed-off-by: Shell Chen <w27@sorz.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit d9f7c39c6b7548bd70519b241b6c2d1bcc658d4b ]

Add VID:PID 13d3:3612 to the quirks_table.

This ID pair is found in the Realtek RTL8852CE PCIe module
in an ASUS TUF A14 2025 (FA401KM) laptop.

Tested on aforementioned laptop.

The device info from /sys/kernel/debug/usb/devices is listed as below.

T:  Bus=03 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#=  2 Spd=12   MxCh= 0
D:  Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3612 Rev= 0.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Radio
S:  SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms

Signed-off-by: Shell Chen <w27@sorz.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bluetooth: btusb: Add USB ID 7392:e611 for Edimax EW-7611UXB 2026-02-16T09:17:47+00:00 Zenm Chen zenmchen@gmail.com 2026-01-29T02:28:19+00:00 6dda9f06990544206289a8fa8524ae519a486f67 commit 6c0568b7741a346088fd6dfced2d871f7d481d06 upstream. Add USB ID 7392:e611 for Edimax EW-7611UXB which is RTL8851BU-based Wi-Fi + Bluetooth adapter. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below: T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=7392 ProdID=e611 Rev= 0.00 S: Manufacturer=Realtek S: Product=802.11ax WLAN Adapter S: SerialNumber=00e04c000001 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 8 Cls=ff(vend.) Sub=ff Prot=ff Driver=rtw89_8851bu_git E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0c(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Cc: stable@vger.kernel.org # 6.6.x Signed-off-by: Zenm Chen <zenmchen@gmail.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 6c0568b7741a346088fd6dfced2d871f7d481d06 upstream.

Add USB ID 7392:e611 for Edimax EW-7611UXB which is RTL8851BU-based
Wi-Fi + Bluetooth adapter.

The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below:

T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  6 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=7392 ProdID=e611 Rev= 0.00
S:  Manufacturer=Realtek
S:  Product=802.11ax WLAN Adapter
S:  SerialNumber=00e04c000001
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=500mA
A:  FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 8 Cls=ff(vend.) Sub=ff Prot=ff Driver=rtw89_8851bu_git
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0c(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Cc: stable@vger.kernel.org # 6.6.x
Signed-off-by: Zenm Chen <zenmchen@gmail.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>