linux-stable.git/drivers/bluetooth, branch v6.15.2 Linux kernel stable tree Bluetooth: hci_qca: move the SoC type check to the right place 2025-06-10T11:17:10+00:00 Bartosz Golaszewski bartosz.golaszewski@linaro.org 2025-05-27T07:47:37+00:00 8b91e4b6b82b57499c939fa249cfae4c3070c0b9 commit 0fb410c914eb03c7e9d821e26d03bac0a239e5db upstream. Commit 3d05fc82237a ("Bluetooth: qca: set power_ctrl_enabled on NULL returned by gpiod_get_optional()") accidentally changed the prevous behavior where power control would be disabled without the BT_EN GPIO only on QCA_WCN6750 and QCA_WCN6855 while also getting the error check wrong. We should treat every IS_ERR() return value from devm_gpiod_get_optional() as a reason to bail-out while we should only set power_ctrl_enabled to false on the two models mentioned above. While at it: use dev_err_probe() to save a LOC. Cc: stable@vger.kernel.org Fixes: 3d05fc82237a ("Bluetooth: qca: set power_ctrl_enabled on NULL returned by gpiod_get_optional()") Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Tested-by: Hsin-chen Chuang <chharry@chromium.org> Reviewed-by: Hsin-chen Chuang <chharry@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 0fb410c914eb03c7e9d821e26d03bac0a239e5db upstream.

Commit 3d05fc82237a ("Bluetooth: qca: set power_ctrl_enabled on NULL
returned by gpiod_get_optional()") accidentally changed the prevous
behavior where power control would be disabled without the BT_EN GPIO
only on QCA_WCN6750 and QCA_WCN6855 while also getting the error check
wrong. We should treat every IS_ERR() return value from
devm_gpiod_get_optional() as a reason to bail-out while we should only
set power_ctrl_enabled to false on the two models mentioned above. While
at it: use dev_err_probe() to save a LOC.

Cc: stable@vger.kernel.org
Fixes: 3d05fc82237a ("Bluetooth: qca: set power_ctrl_enabled on NULL returned by gpiod_get_optional()")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Hsin-chen Chuang <chharry@chromium.org>
Reviewed-by: Hsin-chen Chuang <chharry@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bluetooth: btusb: use skb_pull to avoid unsafe access in QCA dump handling 2025-05-15T17:12:54+00:00 En-Wei Wu en-wei.wu@canonical.com 2025-05-08T14:15:20+00:00 4bcb0c7dc25446b99fc7a8fa2a143d69f3314162 Use skb_pull() and skb_pull_data() to safely parse QCA dump packets. This avoids direct pointer math on skb->data, which could lead to invalid access if the packet is shorter than expected. Fixes: 20981ce2d5a5 ("Bluetooth: btusb: Add WCN6855 devcoredump support") Signed-off-by: En-Wei Wu <en-wei.wu@canonical.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> 
Use skb_pull() and skb_pull_data() to safely parse QCA dump packets.

This avoids direct pointer math on skb->data, which could lead to
invalid access if the packet is shorter than expected.

Fixes: 20981ce2d5a5 ("Bluetooth: btusb: Add WCN6855 devcoredump support")
Signed-off-by: En-Wei Wu <en-wei.wu@canonical.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: btintel_pcie: Add additional to checks to clear TX/RX paths 2025-04-25T19:03:19+00:00 Kiran K kiran.k@intel.com 2025-04-20T01:51:56+00:00 1c7664957e4edb234c69de2db4be1f740d2df564 Due to a hardware issue, there is a possibility that the driver may miss an MSIx interrupt on the RX/TX data path. Since the TX and RX paths are independent, when a TX MSIx interrupt occurs, the driver can check the RX queue for any pending data and process it if present. The same approach applies to the RX path. Fixes: c2b636b3f788 ("Bluetooth: btintel_pcie: Add support for PCIe transport") Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com> Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> 
Due to a hardware issue, there is a possibility that the driver may miss
an MSIx interrupt on the RX/TX data path. Since the TX and RX paths are
independent, when a TX MSIx interrupt occurs, the driver can check the
RX queue for any pending data and process it if present. The same
approach applies to the RX path.

Fixes: c2b636b3f788 ("Bluetooth: btintel_pcie: Add support for PCIe transport")
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: btmtksdio: Do close if SDIO card removed without close 2025-04-25T19:03:19+00:00 Chris Lu chris.lu@mediatek.com 2025-04-22T01:21:56+00:00 0b6d58bc6ea85e57de25c828444928e4a0aa79cb To prevent Bluetooth SDIO card from be physically removed suddenly, driver needs to ensure btmtksdio_close is called before btmtksdio_remove to disable interrupts and txrx workqueue. Fixes: 6ac4233afb9a ("Bluetooth: btmtksdio: Prevent enabling interrupts after IRQ handler removal") Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> 
To prevent Bluetooth SDIO card from be physically removed suddenly,
driver needs to ensure btmtksdio_close is called before
btmtksdio_remove to disable interrupts and txrx workqueue.

Fixes: 6ac4233afb9a ("Bluetooth: btmtksdio: Prevent enabling interrupts after IRQ handler removal")
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: btmtksdio: Check function enabled before doing close 2025-04-25T19:03:19+00:00 Chris Lu chris.lu@mediatek.com 2025-04-22T01:21:55+00:00 07e90048e356a29079fbc011cfc2e1fa1d1c5ac9 Check BTMTKSDIO_FUNC_ENABLED flag before doing close to prevent btmtksdio_close been called twice. Fixes: 6ac4233afb9a ("Bluetooth: btmtksdio: Prevent enabling interrupts after IRQ handler removal") Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> 
Check BTMTKSDIO_FUNC_ENABLED flag before doing close to prevent
btmtksdio_close been called twice.

Fixes: 6ac4233afb9a ("Bluetooth: btmtksdio: Prevent enabling interrupts after IRQ handler removal")
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: btusb: avoid NULL pointer dereference in skb_dequeue() 2025-04-25T19:03:19+00:00 En-Wei Wu en-wei.wu@canonical.com 2025-04-21T13:00:37+00:00 0317b033abcd1d8dd2798f0e2de5e84543d0bd22 A NULL pointer dereference can occur in skb_dequeue() when processing a QCA firmware crash dump on WCN7851 (0489:e0f3). [ 93.672166] Bluetooth: hci0: ACL memdump size(589824) [ 93.672475] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 93.672517] Workqueue: hci0 hci_devcd_rx [bluetooth] [ 93.672598] RIP: 0010:skb_dequeue+0x50/0x80 The issue stems from handle_dump_pkt_qca() returning 0 even when a dump packet is successfully processed. This is because it incorrectly forwards the return value of hci_devcd_init() (which returns 0 on success). As a result, the caller (btusb_recv_acl_qca() or btusb_recv_evt_qca()) assumes the packet was not handled and passes it to hci_recv_frame(), leading to premature kfree() of the skb. Later, hci_devcd_rx() attempts to dequeue the same skb from the dump queue, resulting in a NULL pointer dereference. Fix this by: 1. Making handle_dump_pkt_qca() return 0 on success and negative errno on failure, consistent with kernel conventions. 2. Splitting dump packet detection into separate functions for ACL and event packets for better structure and readability. This ensures dump packets are properly identified and consumed, avoiding double handling and preventing NULL pointer access. Fixes: 20981ce2d5a5 ("Bluetooth: btusb: Add WCN6855 devcoredump support") Signed-off-by: En-Wei Wu <en-wei.wu@canonical.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> 
A NULL pointer dereference can occur in skb_dequeue() when processing a
QCA firmware crash dump on WCN7851 (0489:e0f3).

[ 93.672166] Bluetooth: hci0: ACL memdump size(589824)

[ 93.672475] BUG: kernel NULL pointer dereference, address: 0000000000000008
[ 93.672517] Workqueue: hci0 hci_devcd_rx [bluetooth]
[ 93.672598] RIP: 0010:skb_dequeue+0x50/0x80

The issue stems from handle_dump_pkt_qca() returning 0 even when a dump
packet is successfully processed. This is because it incorrectly
forwards the return value of hci_devcd_init() (which returns 0 on
success). As a result, the caller (btusb_recv_acl_qca() or
btusb_recv_evt_qca()) assumes the packet was not handled and passes it
to hci_recv_frame(), leading to premature kfree() of the skb.

Later, hci_devcd_rx() attempts to dequeue the same skb from the dump
queue, resulting in a NULL pointer dereference.

Fix this by:
1. Making handle_dump_pkt_qca() return 0 on success and negative errno
   on failure, consistent with kernel conventions.
2. Splitting dump packet detection into separate functions for ACL
   and event packets for better structure and readability.

This ensures dump packets are properly identified and consumed, avoiding
double handling and preventing NULL pointer access.

Fixes: 20981ce2d5a5 ("Bluetooth: btusb: Add WCN6855 devcoredump support")
Signed-off-by: En-Wei Wu <en-wei.wu@canonical.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: btintel_pcie: Avoid redundant buffer allocation 2025-04-25T19:03:19+00:00 Kiran K kiran.k@intel.com 2025-04-17T03:48:42+00:00 d1af1f02ef8653dea4573e444136c8331189cd59 Reuse the skb buffer provided by the PCIe driver to pass it onto the stack, instead of copying it to a new skb. Fixes: c2b636b3f788 ("Bluetooth: btintel_pcie: Add support for PCIe transport") Signed-off-by: Kiran K <kiran.k@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> 
Reuse the skb buffer provided by the PCIe driver to pass it onto the
stack, instead of copying it to a new skb.

Fixes: c2b636b3f788 ("Bluetooth: btintel_pcie: Add support for PCIe transport")
Signed-off-by: Kiran K <kiran.k@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: vhci: Avoid needless snprintf() calls 2025-04-16T20:50:47+00:00 Kees Cook kees@kernel.org 2025-04-15T16:15:19+00:00 875db86e1ec75fe633f1e85ed2f92c731cdbf760 Avoid double-copying of string literals. Use a "const char *" for each string instead of copying from .rodata into stack and then into the skb. We can go directly from .rodata to the skb. This also works around a Clang bug (that has since been fixed[1]). Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202401250927.1poZERd6-lkp@intel.com/ Fixes: ab4e4380d4e1 ("Bluetooth: Add vhci devcoredump support") Link: https://github.com/llvm/llvm-project/commit/ea2e66aa8b6e363b89df66dc44275a0d7ecd70ce [1] Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <kees@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> 
Avoid double-copying of string literals. Use a "const char *" for each
string instead of copying from .rodata into stack and then into the skb.
We can go directly from .rodata to the skb.

This also works around a Clang bug (that has since been fixed[1]).

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401250927.1poZERd6-lkp@intel.com/
Fixes: ab4e4380d4e1 ("Bluetooth: Add vhci devcoredump support")
Link: https://github.com/llvm/llvm-project/commit/ea2e66aa8b6e363b89df66dc44275a0d7ecd70ce [1]
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Merge tag 'for-net-2025-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth 2025-04-11T23:34:04+00:00 Jakub Kicinski kuba@kernel.org 2025-04-11T23:34:04+00:00 9767870e76f418cd19d101553668f1e06b724b35 Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - btrtl: Prevent potential NULL dereference - qca: fix NV variant for one of WCN3950 SoCs - l2cap: Check encryption key size on incoming connection - hci_event: Fix sending MGMT_EV_DEVICE_FOUND for invalid address - btnxpuart: Revert baudrate change in nxp_shutdown - btnxpuart: Add an error message if FW dump trigger fails - increment TX timestamping tskey always for stream sockets * tag 'for-net-2025-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: l2cap: Check encryption key size on incoming connection Bluetooth: btnxpuart: Add an error message if FW dump trigger fails Bluetooth: btnxpuart: Revert baudrate change in nxp_shutdown Bluetooth: increment TX timestamping tskey always for stream sockets Bluetooth: qca: fix NV variant for one of WCN3950 SoCs Bluetooth: btrtl: Prevent potential NULL dereference Bluetooth: hci_event: Fix sending MGMT_EV_DEVICE_FOUND for invalid address ==================== Link: https://patch.msgid.link/20250410173542.625232-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Luiz Augusto von Dentz says:

====================
bluetooth pull request for net:

 - btrtl: Prevent potential NULL dereference
 - qca: fix NV variant for one of WCN3950 SoCs
 - l2cap: Check encryption key size on incoming connection
 - hci_event: Fix sending MGMT_EV_DEVICE_FOUND for invalid address
 - btnxpuart: Revert baudrate change in nxp_shutdown
 - btnxpuart: Add an error message if FW dump trigger fails
 - increment TX timestamping tskey always for stream sockets

* tag 'for-net-2025-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
  Bluetooth: l2cap: Check encryption key size on incoming connection
  Bluetooth: btnxpuart: Add an error message if FW dump trigger fails
  Bluetooth: btnxpuart: Revert baudrate change in nxp_shutdown
  Bluetooth: increment TX timestamping tskey always for stream sockets
  Bluetooth: qca: fix NV variant for one of WCN3950 SoCs
  Bluetooth: btrtl: Prevent potential NULL dereference
  Bluetooth: hci_event: Fix sending MGMT_EV_DEVICE_FOUND for invalid address
====================

Link: https://patch.msgid.link/20250410173542.625232-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bluetooth: btnxpuart: Add an error message if FW dump trigger fails 2025-04-10T17:09:36+00:00 Neeraj Sanjay Kale neeraj.sanjaykale@nxp.com 2025-04-03T15:02:22+00:00 103308e50db92d1e705cd9818aaf7fb327c14fad This prints an error message if the FW Dump trigger command fails. This scenario is mainly observed in legacy chipsets 8987 and 8997 and also IW416, where this feature is unavailable due to memory constraints. Fixes: 998e447f443f ("Bluetooth: btnxpuart: Add support for HCI coredump feature") Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> 
This prints an error message if the FW Dump trigger command fails. This
scenario is mainly observed in legacy chipsets 8987 and 8997 and also
IW416, where this feature is unavailable due to memory constraints.

Fixes: 998e447f443f ("Bluetooth: btnxpuart: Add support for HCI coredump feature")
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>