This sets the default power save mode setting to enabled.

The power save feature is now stable and stress test issues, such as the
TX timeout error, have been resolved.
commit c7ee0bc8db32 ("Bluetooth: btnxpuart: Resolve TX timeout error in
power save stress test")

With this setting, the driver will send the vendor command to FW at
startup, to enable power save feature.

User can disable this feature using the following vendor command:
hcitool cmd 3f 23 03 00 00 (HCI_NXP_AUTO_SLEEP_MODE)

Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Commit 272970be3dab ("Bluetooth: hci_qca: Fix driver shutdown on closed
serdev") will cause below regression issue:

BT can't be enabled after below steps:
cold boot -> enable BT -> disable BT -> warm reboot -> BT enable failure
if property enable-gpios is not configured within DT|ACPI for QCA6390.

The commit is to fix a use-after-free issue within qca_serdev_shutdown()
by adding condition to avoid the serdev is flushed or wrote after closed
but also introduces this regression issue regarding above steps since the
VSC is not sent to reset controller during warm reboot.

Fixed by sending the VSC to reset controller within qca_serdev_shutdown()
once BT was ever enabled, and the use-after-free issue is also fixed by
this change since the serdev is still opened before it is flushed or wrote.

Verified by the reported machine Dell XPS 13 9310 laptop over below two
kernel commits:
commit e00fc2700a3f ("Bluetooth: btusb: Fix triggering coredump
implementation for QCA") of bluetooth-next tree.
commit b23d98d46d28 ("Bluetooth: btusb: Fix triggering coredump
implementation for QCA") of linus mainline tree.

Fixes: 272970be3dab ("Bluetooth: hci_qca: Fix driver shutdown on closed serdev")
Cc: stable@vger.kernel.org
Reported-by: Wren Turkal <wt@penguintechs.org>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218726
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Tested-by: Wren Turkal <wt@penguintechs.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

check pdata return of skb_pull_data, instead of data.

Fixes: c2b636b3f788 ("Bluetooth: btintel_pcie: Add support for PCIe transport")
Signed-off-by: Vijay Satija <vijay.satija@intel.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

We are releasing a single msgid, so the order argument to
bitmap_release_region must be zero.

Fixes: 8a06127602de ("Bluetooth: hci_bcm4377: Add new driver for BCM4377 PCIe boards")
Cc: stable@vger.kernel.org
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Some Broadcom controllers found on Apple Silicon machines abuse the
reserved bits inside the PHY fields of LE Extended Advertising Report
events for additional flags. Add a quirk to drop these and correctly
extract the Primary/Secondary_PHY field.

The following excerpt from a btmon trace shows a report received with
"Reserved" for "Primary PHY" on a 4388 controller:

> HCI Event: LE Meta Event (0x3e) plen 26
      LE Extended Advertising Report (0x0d)
        Num reports: 1
        Entry 0
          Event type: 0x2515
            Props: 0x0015
              Connectable
              Directed
              Use legacy advertising PDUs
            Data status: Complete
            Reserved (0x2500)
         Legacy PDU Type: Reserved (0x2515)
          Address type: Random (0x01)
          Address: 00:00:00:00:00:00 (Static)
          Primary PHY: Reserved
          Secondary PHY: No packets
          SID: no ADI field (0xff)
          TX power: 127 dBm
          RSSI: -60 dBm (0xc4)
          Periodic advertising interval: 0.00 msec (0x0000)
          Direct address type: Public (0x00)
          Direct address: 00:00:00:00:00:00 (Apple, Inc.)
          Data length: 0x00

Cc: stable@vger.kernel.org
Fixes: 2e7ed5f5e69b ("Bluetooth: hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync")
Reported-by: Janne Grunau <j@jannau.net>
Closes: https://lore.kernel.org/all/Zjz0atzRhFykROM9@robin
Tested-by: Janne Grunau <j@jannau.net>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Pull virtio updates from Michael Tsirkin:
 "Several new features here:

   - virtio-net is finally supported in vduse

   - virtio (balloon and mem) interaction with suspend is improved

   - vhost-scsi now handles signals better/faster

  And fixes, cleanups all over the place"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (48 commits)
  virtio-pci: Check if is_avq is NULL
  virtio: delete vq in vp_find_vqs_msix() when request_irq() fails
  MAINTAINERS: add Eugenio Pérez as reviewer
  vhost-vdpa: Remove usage of the deprecated ida_simple_xx() API
  vp_vdpa: don't allocate unused msix vectors
  sound: virtio: drop owner assignment
  fuse: virtio: drop owner assignment
  scsi: virtio: drop owner assignment
  rpmsg: virtio: drop owner assignment
  nvdimm: virtio_pmem: drop owner assignment
  wifi: mac80211_hwsim: drop owner assignment
  vsock/virtio: drop owner assignment
  net: 9p: virtio: drop owner assignment
  net: virtio: drop owner assignment
  net: caif: virtio: drop owner assignment
  misc: nsm: drop owner assignment
  iommu: virtio: drop owner assignment
  drm/virtio: drop owner assignment
  gpio: virtio: drop owner assignment
  firmware: arm_scmi: virtio: drop owner assignment
  ...

virtio core already sets the .owner, so driver does not need to.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Message-Id: <20240331-module-owner-virtio-v2-7-98f04bfaf46a@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Increase the timeout period of the ACMD41 command
   - Add card entry for quirks to debugfs
   - Add mmc_gpiod_set_cd_config() function
   - Store owner from SDIO modules with sdio_register_driver()

  MMC host:
   - atmel-mci: Some cleanups and a switch to use dev_err_probe()
   - renesas_sdhi:
      - Add support for RZ/G2L, RZ/G3S and RZ/V2M variants
      - Set the SDBUF after reset
   - sdhci: Add support for "Tuning Error" interrupts
   - sdhci-acpi:
      - Add quirk to enable pull-up on the card-detect GPIO on Asus
        T100TA
      - Disable write protect detection on Toshiba WT10-A
      - Fix Lenovo Yoga Tablet 2 Pro 1380 sdcard slot not working
   - sdhci_am654:
      - Re-work and fix the tuning support for multiple speed-modes
      - Add tuning algorithm for delay chain
   - sdhci-esdhc-imx: Add NXP S32G3 support
   - sdhci-of-dwcmshc:
      - Add tuning support for Sophgo CV1800B and SG200X
      - Implement SDHCI CQE support
   - sdhci-pci-gli: Use the proper pci_set_power_state() instead of
     PMCSR writes"

  MEMSTICK:
   - Convert a couple of drivers to use the ->remove_new() callback"

* tag 'mmc-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (59 commits)
  mmc: renesas_sdhi: Add compatible string for RZ/G2L family, RZ/G3S, and RZ/V2M SoCs
  dt-bindings: mmc: renesas,sdhi: Document RZ/G2L family compatibility
  dt-bindings: mmc: renesas,sdhi: Group single const value items into an enum list
  mmc: renesas_sdhi: Set the SDBUF after reset
  mmc: core: Increase the timeout period of the ACMD41 command
  mmc: core: Convert to use __mmc_poll_for_busy() SD_APP_OP_COND too
  mmc: atmel-mci: Switch to use dev_err_probe()
  mmc: atmel-mci: Incapsulate used to be a platform data into host structure
  mmc: atmel-mci: Replace platform device pointer by generic one
  mmc: atmel-mci: Use temporary variable for struct device
  mmc: atmel-mci: Get rid of platform data leftovers
  mmc: sdhci-of-dwcmshc: Add tuning support for Sophgo CV1800B and SG200X
  mmc: sdhci-of-dwcmshc: Remove useless "&" of th1520_execute_tuning
  mmc: sdhci-s3c: Choose sdhci_ops based on variant
  mmc: sdhci_am654: Constify struct sdhci_ops
  mmc: sdhci-sprd: Constify struct sdhci_ops
  mmc: sdhci-omap: Constify struct sdhci_ops
  mmc: sdhci-esdhc-mcf: Constify struct sdhci_ops
  mmc: slot-gpio: Use irq_handler_t type
  mmc: sdhci-acpi: Add quirk to enable pull-up on the card-detect GPIO on Asus T100TA
  ...

Minor refactor and s/TX_WAIT_TIMEOUT_MS/BTINTEL_PCIE_TX_WAIT_TIMEOUT_MS/g.

Fixes: 6e65a09f9275 ("Bluetooth: btintel_pcie: Add *setup* function to download firmware")
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Fix sparse error.

Fixes: c2b636b3f788 ("Bluetooth: btintel_pcie: Add support for PCIe transport")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202405100654.0djvoryZ-lkp@intel.com/
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>