linux-stable.git/drivers/bluetooth, branch v5.4.285 Linux kernel stable tree Bluetooth: btusb: Fix regression with fake CSR controllers 0a12:0001 2024-11-08T15:20:48+00:00 Luiz Augusto von Dentz luiz.von.dentz@intel.com 2024-10-16T15:47:00+00:00 d42c3fa1209890ce838476bbd5e56ad4f6a39679 commit 2c1dda2acc4192d826e84008d963b528e24d12bc upstream. Fake CSR controllers don't seem to handle short-transfer properly which cause command to time out: kernel: usb 1-1: new full-speed USB device number 19 using xhci_hcd kernel: usb 1-1: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91 kernel: usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 kernel: usb 1-1: Product: BT DONGLE10 ... Bluetooth: hci1: Opcode 0x1004 failed: -110 kernel: Bluetooth: hci1: command 0x1004 tx timeout According to USB Spec 2.0 Section 5.7.3 Interrupt Transfer Packet Size Constraints a interrupt transfer is considered complete when the size is 0 (ZPL) or < wMaxPacketSize: 'When an interrupt transfer involves more data than can fit in one data payload of the currently established maximum size, all data payloads are required to be maximum-sized except for the last data payload, which will contain the remaining data. An interrupt transfer is complete when the endpoint does one of the following: • Has transferred exactly the amount of data expected • Transfers a packet with a payload size less than wMaxPacketSize or transfers a zero-length packet' Link: https://bugzilla.kernel.org/show_bug.cgi?id=219365 Fixes: 7b05933340f4 ("Bluetooth: btusb: Fix not handling ZPL/short-transfer") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 2c1dda2acc4192d826e84008d963b528e24d12bc upstream.

Fake CSR controllers don't seem to handle short-transfer properly which
cause command to time out:

kernel: usb 1-1: new full-speed USB device number 19 using xhci_hcd
kernel: usb 1-1: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91
kernel: usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
kernel: usb 1-1: Product: BT DONGLE10
...
Bluetooth: hci1: Opcode 0x1004 failed: -110
kernel: Bluetooth: hci1: command 0x1004 tx timeout

According to USB Spec 2.0 Section 5.7.3 Interrupt Transfer Packet Size
Constraints a interrupt transfer is considered complete when the size is 0
(ZPL) or < wMaxPacketSize:

 'When an interrupt transfer involves more data than can fit in one
 data payload of the currently established maximum size, all data
 payloads are required to be maximum-sized except for the last data
 payload, which will contain the remaining data. An interrupt transfer
 is complete when the endpoint does one of the following:

 • Has transferred exactly the amount of data expected
 • Transfers a packet with a payload size less than wMaxPacketSize or
 transfers a zero-length packet'

Link: https://bugzilla.kernel.org/show_bug.cgi?id=219365
Fixes: 7b05933340f4 ("Bluetooth: btusb: Fix not handling ZPL/short-transfer")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bluetooth: btmrvl: Use IRQF_NO_AUTOEN flag in request_irq() 2024-11-08T15:20:36+00:00 Jinjie Ruan ruanjinjie@huawei.com 2024-09-12T03:12:04+00:00 efd9ff49d9c984aa7a8d0154d80ae5638df2cc24 [ Upstream commit 7b1ab460592ca818e7b52f27cd3ec86af79220d1 ] disable_irq() after request_irq() still has a time gap in which interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will disable IRQ auto-enable when request IRQ. Fixes: bb7f4f0bcee6 ("btmrvl: add platform specific wakeup interrupt support") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 7b1ab460592ca818e7b52f27cd3ec86af79220d1 ]

disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.

Fixes: bb7f4f0bcee6 ("btmrvl: add platform specific wakeup interrupt support")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bluetooth: btmrvl_sdio: Refactor irq wakeup 2024-11-08T15:20:36+00:00 Abhishek Pandit-Subedi abhishekpandit@chromium.org 2020-06-11T01:53:55+00:00 8f390b9eed9452ad41e56cf0b790fbfa08892794 [ Upstream commit e660b3510eb4b3c06ce1188a1d305b6f653106fc ] Use device_init_wakeup to allow the Bluetooth dev to wake the system from suspend. Currently, the device can wake the system but no power/wakeup entry is created in sysfs to allow userspace to disable wakeup. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Stable-dep-of: 7b1ab460592c ("Bluetooth: btmrvl: Use IRQF_NO_AUTOEN flag in request_irq()") Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit e660b3510eb4b3c06ce1188a1d305b6f653106fc ]

Use device_init_wakeup to allow the Bluetooth dev to wake the system
from suspend. Currently, the device can wake the system but no
power/wakeup entry is created in sysfs to allow userspace to disable
wakeup.

Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Stable-dep-of: 7b1ab460592c ("Bluetooth: btmrvl: Use IRQF_NO_AUTOEN flag in request_irq()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bluetooth: btusb: Fix not handling ZPL/short-transfer 2024-11-08T15:20:27+00:00 Luiz Augusto von Dentz luiz.von.dentz@intel.com 2024-09-09T20:51:52+00:00 309eb08b483b07bba2a78c8c839c483be46cef4f [ Upstream commit 7b05933340f4490ef5b09e84d644d12484b05fdf ] Requesting transfers of the exact same size of wMaxPacketSize may result in ZPL/short-transfer since the USB stack cannot handle it as we are limiting the buffer size to be the same as wMaxPacketSize. Also, in terms of throughput this change has the same effect to interrupt endpoint as 290ba200815f "Bluetooth: Improve USB driver throughput by increasing the frame size" had for the bulk endpoint, so users of the advertisement bearer (e.g. BT Mesh) may benefit from this change. Fixes: 5e23b923da03 ("[Bluetooth] Add generic driver for Bluetooth USB devices") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by: Kiran K <kiran.k@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 7b05933340f4490ef5b09e84d644d12484b05fdf ]

Requesting transfers of the exact same size of wMaxPacketSize may result
in ZPL/short-transfer since the USB stack cannot handle it as we are
limiting the buffer size to be the same as wMaxPacketSize.

Also, in terms of throughput this change has the same effect to
interrupt endpoint as 290ba200815f "Bluetooth: Improve USB driver throughput
by increasing the frame size" had for the bulk endpoint, so users of the
advertisement bearer (e.g. BT Mesh) may benefit from this change.

Fixes: 5e23b923da03 ("[Bluetooth] Add generic driver for Bluetooth USB devices")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bluetooth: hci_ldisc: check HCI_UART_PROTO_READY flag in HCIUARTGETPROTO 2024-09-04T11:15:01+00:00 Lee, Chun-Yi joeyli.kernel@gmail.com 2023-07-10T15:17:23+00:00 7732c54f2b41dac9a55e4e12de9691f6f93bf91a commit 9c33663af9ad115f90c076a1828129a3fbadea98 upstream. This patch adds code to check HCI_UART_PROTO_READY flag before accessing hci_uart->proto. It fixes the race condition in hci_uart_tty_ioctl() between HCIUARTSETPROTO and HCIUARTGETPROTO. This issue bug found by Yu Hao and Weiteng Chen: BUG: general protection fault in hci_uart_tty_ioctl [1] The information of C reproducer can also reference the link [2] Reported-by: Yu Hao <yhao016@ucr.edu> Closes: https://lore.kernel.org/all/CA+UBctC3p49aTgzbVgkSZ2+TQcqq4fPDO7yZitFT5uBPDeCO2g@mail.gmail.com/ [1] Reported-by: Weiteng Chen <wchen130@ucr.edu> Closes: https://lore.kernel.org/lkml/CA+UBctDPEvHdkHMwD340=n02rh+jNRJNNQ5LBZNA+Wm4Keh2ow@mail.gmail.com/T/ [2] Signed-off-by: "Lee, Chun-Yi" <jlee@suse.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 9c33663af9ad115f90c076a1828129a3fbadea98 upstream.

This patch adds code to check HCI_UART_PROTO_READY flag before
accessing hci_uart->proto. It fixes the race condition in
hci_uart_tty_ioctl() between HCIUARTSETPROTO and HCIUARTGETPROTO.
This issue bug found by Yu Hao and Weiteng Chen:

BUG: general protection fault in hci_uart_tty_ioctl [1]

The information of C reproducer can also reference the link [2]

Reported-by: Yu Hao <yhao016@ucr.edu>
Closes: https://lore.kernel.org/all/CA+UBctC3p49aTgzbVgkSZ2+TQcqq4fPDO7yZitFT5uBPDeCO2g@mail.gmail.com/ [1]
Reported-by: Weiteng Chen <wchen130@ucr.edu>
Closes: https://lore.kernel.org/lkml/CA+UBctDPEvHdkHMwD340=n02rh+jNRJNNQ5LBZNA+Wm4Keh2ow@mail.gmail.com/T/ [2]
Signed-off-by: "Lee, Chun-Yi" <jlee@suse.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bluetooth: btusb: Add Realtek RTL8852BE support ID 0x13d3:0x3591 2024-08-19T03:33:40+00:00 WangYuli wangyuli@uniontech.com 2024-06-22T04:09:59+00:00 17290401141aa8cb4a835ed18556a1830d991608 commit 473a89b4ed7fd52a419340f7c540d5c8fc96fc75 upstream. Add the support ID(0x13d3, 0x3591) to usb_device_id table for Realtek RTL8852BE. The device table is as follows: T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3591 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Cc: stable@vger.kernel.org Signed-off-by: Wentao Guan <guanwentao@uniontech.com> Signed-off-by: WangYuli <wangyuli@uniontech.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Erpeng Xu <xuerpeng@uniontech.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 473a89b4ed7fd52a419340f7c540d5c8fc96fc75 upstream.

Add the support ID(0x13d3, 0x3591) to usb_device_id table for
Realtek RTL8852BE.

The device table is as follows:

T:  Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#=  5 Spd=12   MxCh= 0
D:  Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3591 Rev= 0.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Radio
S:  SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Cc: stable@vger.kernel.org
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Erpeng Xu <xuerpeng@uniontech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bluetooth: btusb: Add RTL8852BE device 0489:e125 to device tables 2024-08-19T03:33:40+00:00 Hilda Wu hildawu@realtek.com 2024-06-17T09:05:18+00:00 3b5bcca85831dd1068e683a40246993c5ae1561e commit 295ef07a9dae6182ad4b689aa8c6a7dbba21474c upstream. Add the support ID 0489:e125 to usb_device_id table for Realtek RTL8852B chip. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=03 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e125 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Hilda Wu <hildawu@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Erpeng Xu <xuerpeng@uniontech.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 295ef07a9dae6182ad4b689aa8c6a7dbba21474c upstream.

Add the support ID 0489:e125 to usb_device_id table for
Realtek RTL8852B chip.

The device info from /sys/kernel/debug/usb/devices as below.

T:  Bus=01 Lev=01 Prnt=01 Port=07 Cnt=03 Dev#=  5 Spd=12   MxCh= 0
D:  Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0489 ProdID=e125 Rev= 0.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Radio
S:  SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: Hilda Wu <hildawu@realtek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Erpeng Xu <xuerpeng@uniontech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bluetooth: ath3k: Fix multiple issues reported by checkpatch.pl 2024-07-05T07:08:21+00:00 Uri Arev me@wantyapps.xyz 2024-04-05T21:42:24+00:00 6eaaa1e440a957a2bf74dd7abde0688ba7de732e [ Upstream commit 68aa21054ec3a1a313af90a5f95ade16c3326d20 ] This fixes some CHECKs reported by the checkpatch script. Issues reported in ath3k.c: ------- ath3k.c ------- CHECK: Please don't use multiple blank lines + + CHECK: Blank lines aren't necessary after an open brace '{' +static const struct usb_device_id ath3k_blist_tbl[] = { + CHECK: Alignment should match open parenthesis +static int ath3k_load_firmware(struct usb_device *udev, + const struct firmware *firmware) CHECK: Alignment should match open parenthesis + err = usb_bulk_msg(udev, pipe, send_buf, size, + &len, 3000); CHECK: Unnecessary parentheses around 'len != size' + if (err || (len != size)) { CHECK: Alignment should match open parenthesis +static int ath3k_get_version(struct usb_device *udev, + struct ath3k_version *version) CHECK: Alignment should match open parenthesis +static int ath3k_load_fwfile(struct usb_device *udev, + const struct firmware *firmware) CHECK: Alignment should match open parenthesis + err = usb_bulk_msg(udev, pipe, send_buf, size, + &len, 3000); CHECK: Unnecessary parentheses around 'len != size' + if (err || (len != size)) { CHECK: Blank lines aren't necessary after an open brace '{' + switch (fw_version.ref_clock) { + CHECK: Alignment should match open parenthesis + snprintf(filename, ATH3K_NAME_LEN, "ar3k/ramps_0x%08x_%d%s", + le32_to_cpu(fw_version.rom_version), clk_value, ".dfu"); CHECK: Alignment should match open parenthesis +static int ath3k_probe(struct usb_interface *intf, + const struct usb_device_id *id) CHECK: Alignment should match open parenthesis + BT_ERR("Firmware file \"%s\" not found", + ATH3K_FIRMWARE); CHECK: Alignment should match open parenthesis + BT_ERR("Firmware file \"%s\" request failed (err=%d)", + ATH3K_FIRMWARE, ret); total: 0 errors, 0 warnings, 14 checks, 540 lines checked Signed-off-by: Uri Arev <me@wantyapps.xyz> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 68aa21054ec3a1a313af90a5f95ade16c3326d20 ]

This fixes some CHECKs reported by the checkpatch script.

Issues reported in ath3k.c:
-------
ath3k.c
-------
CHECK: Please don't use multiple blank lines
+
+

CHECK: Blank lines aren't necessary after an open brace '{'
+static const struct usb_device_id ath3k_blist_tbl[] = {
+

CHECK: Alignment should match open parenthesis
+static int ath3k_load_firmware(struct usb_device *udev,
+                               const struct firmware *firmware)

CHECK: Alignment should match open parenthesis
+               err = usb_bulk_msg(udev, pipe, send_buf, size,
+                                       &len, 3000);

CHECK: Unnecessary parentheses around 'len != size'
+               if (err || (len != size)) {

CHECK: Alignment should match open parenthesis
+static int ath3k_get_version(struct usb_device *udev,
+                       struct ath3k_version *version)

CHECK: Alignment should match open parenthesis
+static int ath3k_load_fwfile(struct usb_device *udev,
+               const struct firmware *firmware)

CHECK: Alignment should match open parenthesis
+               err = usb_bulk_msg(udev, pipe, send_buf, size,
+                                       &len, 3000);

CHECK: Unnecessary parentheses around 'len != size'
+               if (err || (len != size)) {

CHECK: Blank lines aren't necessary after an open brace '{'
+       switch (fw_version.ref_clock) {
+

CHECK: Alignment should match open parenthesis
+       snprintf(filename, ATH3K_NAME_LEN, "ar3k/ramps_0x%08x_%d%s",
+               le32_to_cpu(fw_version.rom_version), clk_value, ".dfu");

CHECK: Alignment should match open parenthesis
+static int ath3k_probe(struct usb_interface *intf,
+                       const struct usb_device_id *id)

CHECK: Alignment should match open parenthesis
+                       BT_ERR("Firmware file \"%s\" not found",
+                                                       ATH3K_FIRMWARE);

CHECK: Alignment should match open parenthesis
+               BT_ERR("Firmware file \"%s\" request failed (err=%d)",
+                                               ATH3K_FIRMWARE, ret);

total: 0 errors, 0 warnings, 14 checks, 540 lines checked

Signed-off-by: Uri Arev <me@wantyapps.xyz>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bluetooth: btusb: Add Realtek RTL8852BE support ID 0x0bda:0x4853 2024-05-02T14:18:36+00:00 WangYuli wangyuli@uniontech.com 2024-03-29T02:34:39+00:00 344972770c285d0a19b2c0a7f3077b45956a1e94 commit d1a5a7eede2977da3d2002d5ea3b519019cc1a98 upstream. Add the support ID(0x0bda, 0x4853) to usb_device_id table for Realtek RTL8852BE. Without this change the device utilizes an obsolete version of the firmware that is encoded in it rather than the updated Realtek firmware and config files from the firmware directory. The latter files implement many new features. The device table is as follows: T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=03 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=4853 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Cc: stable@vger.kernel.org Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: WangYuli <wangyuli@uniontech.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d1a5a7eede2977da3d2002d5ea3b519019cc1a98 upstream.

Add the support ID(0x0bda, 0x4853) to usb_device_id table for
Realtek RTL8852BE.

Without this change the device utilizes an obsolete version of
the firmware that is encoded in it rather than the updated Realtek
firmware and config files from the firmware directory. The latter
files implement many new features.

The device table is as follows:

T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=03 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0bda ProdID=4853 Rev= 0.00
S: Manufacturer=Realtek
S: Product=Bluetooth Radio
S: SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms

Cc: stable@vger.kernel.org
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bluetooth: btintel: Fixe build regression 2024-04-13T10:51:40+00:00 Luiz Augusto von Dentz luiz.von.dentz@intel.com 2024-02-23T17:36:23+00:00 d006b709db522959cd05411efcb83d521200af8c commit 6e62ebfb49eb65bdcbfc5797db55e0ce7f79c3dd upstream. This fixes the following build regression: drivers-bluetooth-btintel.c-btintel_read_version()-warn: passing-zero-to-PTR_ERR Fixes: b79e04091010 ("Bluetooth: btintel: Fix null ptr deref in btintel_read_version") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 6e62ebfb49eb65bdcbfc5797db55e0ce7f79c3dd upstream.

This fixes the following build regression:

drivers-bluetooth-btintel.c-btintel_read_version()-warn:
passing-zero-to-PTR_ERR

Fixes: b79e04091010 ("Bluetooth: btintel: Fix null ptr deref in btintel_read_version")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>