linux-stable.git/drivers/bluetooth, branch v5.4.232

Bluetooth: hci_bcsp: don't call kfree_skb() under spin_lock_irqsave()

2023-01-18T10:41:16+00:00

[ Upstream commit 7b503e339c1a80bf0051ec2d19c3bc777014ac61 ]

It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave().

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Sasha Levin

Bluetooth: hci_h5: don't call kfree_skb() under spin_lock_irqsave()

2023-01-18T10:41:16+00:00

[ Upstream commit 383630cc6758d619874c2e8bb2f68a61f3f9ef6e ]

It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave().

Fixes: 43eb12d78960 ("Bluetooth: Fix/implement Three-wire reliable packet sending")
Signed-off-by: Yang Yingliang 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Sasha Levin

Bluetooth: hci_ll: don't call kfree_skb() under spin_lock_irqsave()

2023-01-18T10:41:16+00:00

[ Upstream commit 8f458f783dfbb19c1f1cb58ed06eeb701f52091b ]

It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave().

Fixes: 166d2f6a4332 ("[Bluetooth] Add UART driver for Texas Instruments' BRF63xx chips")
Signed-off-by: Yang Yingliang 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Sasha Levin

Bluetooth: hci_qca: don't call kfree_skb() under spin_lock_irqsave()

2023-01-18T10:41:16+00:00

[ Upstream commit df4cfc91208e0a98f078223793f5871b1a82cc54 ]

It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave().

Fixes: 0ff252c1976d ("Bluetooth: hciuart: Add support QCA chipset for UART")
Signed-off-by: Yang Yingliang 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Sasha Levin

Bluetooth: btusb: don't call kfree_skb() under spin_lock_irqsave()

2023-01-18T10:41:16+00:00

[ Upstream commit b15a6bd3c80c77faec8317319b97f976b1a08332 ]

It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave().

Fixes: 803b58367ffb ("Bluetooth: btusb: Implement driver internal packet reassembly")
Signed-off-by: Yang Yingliang 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Sasha Levin

Bluetooth: hci_intel: Add check for platform_driver_register

2022-08-25T09:17:47+00:00

[ Upstream commit ab2d2a982ff721f4b029282d9a40602ea46a745e ]

As platform_driver_register() could fail, it should be better
to deal with the return value in order to maintain the code
consisitency.

Fixes: 1ab1f239bf17 ("Bluetooth: hci_intel: Add support for platform driver")
Signed-off-by: Jiasheng Jiang 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin

Bluetooth: btmtksdio: Fix kernel oops in btmtksdio_interrupt

2022-04-15T12:18:16+00:00

[ Upstream commit b062a0b9c1dc1ff63094337dccfe1568d5b62023 ]

Fix the following kernel oops in btmtksdio_interrrupt

[   14.339134]  btmtksdio_interrupt+0x28/0x54
[   14.339139]  process_sdio_pending_irqs+0x68/0x1a0
[   14.339144]  sdio_irq_work+0x40/0x70
[   14.339154]  process_one_work+0x184/0x39c
[   14.339160]  worker_thread+0x228/0x3e8
[   14.339168]  kthread+0x148/0x3ac
[   14.339176]  ret_from_fork+0x10/0x30

That happened because hdev->power_on is already called before
sdio_set_drvdata which btmtksdio_interrupt handler relies on is not
properly set up.

The details are shown as the below: hci_register_dev would run
queue_work(hdev->req_workqueue, &hdev->power_on) as WQ_HIGHPRI
workqueue_struct to complete the power-on sequeunce and thus hci_power_on
may run before sdio_set_drvdata is done in btmtksdio_probe.

The hci_dev_do_open in hci_power_on would initialize the device and enable
the interrupt and thus it is possible that btmtksdio_interrupt is being
called right before sdio_set_drvdata is filled out.

When btmtksdio_interrupt is being called and sdio_set_drvdata is not filled
, the kernel oops is going to happen because btmtksdio_interrupt access an
uninitialized pointer.

Fixes: 9aebfd4a2200 ("Bluetooth: mediatek: add support for MediaTek MT7663S and MT7668S SDIO devices")
Reviewed-by: Mark Chen 
Co-developed-by: Sean Wang 
Signed-off-by: Sean Wang 
Signed-off-by: Yake Yang 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin

Bluetooth: hci_serdev: call init_rwsem() before p->open()

2022-04-15T12:18:10+00:00

[ Upstream commit 9d7cbe2b9cf5f650067df4f402fdd799d4bbb4e1 ]

kvartet reported, that hci_uart_tx_wakeup() uses uninitialized rwsem.
The problem was in wrong place for percpu_init_rwsem() call.

hci_uart_proto::open() may register a timer whose callback may call
hci_uart_tx_wakeup(). There is a chance, that hci_uart_register_device()
thread won't be fast enough to call percpu_init_rwsem().

Fix it my moving percpu_init_rwsem() call before p->open().

INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
CPU: 2 PID: 18524 Comm: syz-executor.5 Not tainted 5.16.0-rc6 #9
...
Call Trace:
 
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
 assign_lock_key kernel/locking/lockdep.c:951 [inline]
 register_lock_class+0x148d/0x1950 kernel/locking/lockdep.c:1263
 __lock_acquire+0x106/0x57e0 kernel/locking/lockdep.c:4906
 lock_acquire kernel/locking/lockdep.c:5637 [inline]
 lock_acquire+0x1ab/0x520 kernel/locking/lockdep.c:5602
 percpu_down_read_trylock include/linux/percpu-rwsem.h:92 [inline]
 hci_uart_tx_wakeup+0x12e/0x490 drivers/bluetooth/hci_ldisc.c:124
 h5_timed_event+0x32f/0x6a0 drivers/bluetooth/hci_h5.c:188
 call_timer_fn+0x1a5/0x6b0 kernel/time/timer.c:1421

Fixes: d73e17281665 ("Bluetooth: hci_serdev: Init hci_uart proto_lock to avoid oops")
Reported-by: Yiru Xu 
Signed-off-by: Pavel Skripkin 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin

Bluetooth: hci_bcm: Check for error irq

2022-01-27T08:19:36+00:00

[ Upstream commit b38cd3b42fba66cc538edb9cf77e07881f43f8e2 ]

For the possible failure of the platform_get_irq(), the returned irq
could be error number and will finally cause the failure of the
request_irq().
Consider that platform_get_irq() can now in certain cases return
-EPROBE_DEFER, and the consequences of letting request_irq() effectively
convert that into -EINVAL, even at probe time rather than later on.
So it might be better to check just now.

Fixes: 0395ffc1ee05 ("Bluetooth: hci_bcm: Add PM for BCM devices")
Signed-off-by: Jiasheng Jiang 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin

Bluetooth: btmtksdio: fix resume failure

2022-01-27T08:19:32+00:00

[ Upstream commit 561ae1d46a8ddcbc13162d5771f5ed6c8249e730 ]

btmtksdio have to rely on MMC_PM_KEEP_POWER in pm_flags to avoid that
SDIO power is being shut off during the device is in suspend. That fixes
the SDIO command fails to access the bus after the device is resumed.

Fixes: 7f3c563c575e7 ("Bluetooth: btmtksdio: Add runtime PM support to SDIO based Bluetooth")
Co-developed-by: Mark-yw Chen 
Signed-off-by: Mark-yw Chen 
Signed-off-by: Sean Wang 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin