linux-stable.git/drivers/bluetooth, branch v4.9.331 Linux kernel stable tree Bluetooth: bfusb: fix division by zero in send path 2022-01-27T07:47:30+00:00 Johan Hovold johan@kernel.org 2021-10-25T11:39:44+00:00 0958ebfff27bc6b7c923bd81e7d4ea2059771b3b commit b5e6fa7a12572c82f1e7f2f51fbb02a322291291 upstream. Add the missing bulk-out endpoint sanity check to probe() to avoid division by zero in bfusb_send_frame() in case a malicious device has broken descriptors (or when doing descriptor fuzz testing). Note that USB core will reject URBs submitted for endpoints with zero wMaxPacketSize but that drivers doing packet-size calculations still need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip endpoint descriptors with maxpacket=0")). Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b5e6fa7a12572c82f1e7f2f51fbb02a322291291 upstream.

Add the missing bulk-out endpoint sanity check to probe() to avoid
division by zero in bfusb_send_frame() in case a malicious device has
broken descriptors (or when doing descriptor fuzz testing).

Note that USB core will reject URBs submitted for endpoints with zero
wMaxPacketSize but that drivers doing packet-size calculations still
need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip
endpoint descriptors with maxpacket=0")).

Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bluetooth: btusb: Apply QCA Rome patches for some ATH3012 models 2022-01-11T12:38:11+00:00 Takashi Iwai tiwai@suse.de 2018-05-21T20:34:52+00:00 7c574bcf891b6c3923a10fc1782c16be5c5abfbf commit 803cdb8ce584198cd45825822910cac7de6378cb upstream. In commit f44cb4b19ed4 ("Bluetooth: btusb: Fix quirk for Atheros 1525/QCA6174") we tried to address the non-working Atheros BT devices by changing the quirk from BTUSB_ATH3012 to BTUSB_QCA_ROME. This made such devices working while it turned out to break other existing chips with the very same USB ID, hence it was reverted afterwards. This is another attempt to tackle the issue. The essential point to use BTUSB_QCA_ROME is to apply the btusb_setup_qca() and do RAM- patching. And the previous attempt failed because btusb_setup_qca() returns -ENODEV if the ROM version doesn't match with the expected ones. For some devices that have already the "correct" ROM versions, we may just skip the setup procedure and continue the rest. So, the first fix we'll need is to add a check of the ROM version in the function to skip the setup if the ROM version looks already sane, so that it can be applied for all ath devices. However, the world is a bit more complex than that simple solution. Since BTUSB_ATH3012 quirk checks the bcdDevice and bails out when it's 0x0001 at the beginning of probing, so the device probe always aborts here. In this patch, we add another check of ROM version again, and if the device needs patching, the probe continues. For that, a slight refactoring of btusb_qca_send_vendor_req() was required so that the probe function can pass usb_device pointer directly before allocating hci_dev stuff. Fixes: commit f44cb4b19ed4 ("Bluetooth: btusb: Fix quirk for Atheros 1525/QCA6174") Bugzilla: http://bugzilla.opensuse.org/show_bug.cgi?id=1082504 Tested-by: Ivan Levshin <ivan.levshin@microfocus.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 803cdb8ce584198cd45825822910cac7de6378cb upstream.

In commit f44cb4b19ed4 ("Bluetooth: btusb: Fix quirk for Atheros
1525/QCA6174") we tried to address the non-working Atheros BT devices
by changing the quirk from BTUSB_ATH3012 to BTUSB_QCA_ROME.  This made
such devices working while it turned out to break other existing chips
with the very same USB ID, hence it was reverted afterwards.

This is another attempt to tackle the issue.  The essential point to
use BTUSB_QCA_ROME is to apply the btusb_setup_qca() and do RAM-
patching.  And the previous attempt failed because btusb_setup_qca()
returns -ENODEV if the ROM version doesn't match with the expected
ones.  For some devices that have already the "correct" ROM versions,
we may just skip the setup procedure and continue the rest.

So, the first fix we'll need is to add a check of the ROM version in
the function to skip the setup if the ROM version looks already sane,
so that it can be applied for all ath devices.

However, the world is a bit more complex than that simple solution.
Since BTUSB_ATH3012 quirk checks the bcdDevice and bails out when it's
0x0001 at the beginning of probing, so the device probe always aborts
here.

In this patch, we add another check of ROM version again, and if the
device needs patching, the probe continues.  For that, a slight
refactoring of btusb_qca_send_vendor_req() was required so that the
probe function can pass usb_device pointer directly before allocating
hci_dev stuff.

Fixes: commit f44cb4b19ed4 ("Bluetooth: btusb: Fix quirk for Atheros 1525/QCA6174")
Bugzilla: http://bugzilla.opensuse.org/show_bug.cgi?id=1082504
Tested-by: Ivan Levshin <ivan.levshin@microfocus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bluetooth: btusb: fix bt fiwmare downloading failure issue for qca btsoc. 2021-07-20T14:21:08+00:00 Tim Jiang tjiang@codeaurora.org 2021-06-01T09:57:10+00:00 0601a2b45fc4ac3df724edb9b9db3c31a47a8c6f [ Upstream commit 4f00bfb372674d586c4a261bfc595cbce101fbb6 ] This is btsoc timing issue, after host start to downloading bt firmware, ep2 need time to switch from function acl to function dfu, so host add 20ms delay as workaround. Signed-off-by: Tim Jiang <tjiang@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 4f00bfb372674d586c4a261bfc595cbce101fbb6 ]

This is btsoc timing issue, after host start to downloading bt firmware,
ep2 need time to switch from function acl to function dfu, so host add
20ms delay as workaround.

Signed-off-by: Tim Jiang <tjiang@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bluetooth: btusb: fix PM leak in error case of setup 2020-01-12T10:24:16+00:00 Oliver Neukum oneukum@suse.com 2019-11-14T15:01:18+00:00 c4095a6d70c6d0e8b87df2491e0d68b7bdbcef7f commit 3d44a6fd0775e6215e836423e27f8eedf8c871ea upstream. If setup() fails a reference for runtime PM has already been taken. Proper use of the error handling in btusb_open()is needed. You cannot just return. Fixes: ace31982585a3 ("Bluetooth: btusb: Add setup callback for chip init on USB") Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3d44a6fd0775e6215e836423e27f8eedf8c871ea upstream.

If setup() fails a reference for runtime PM has already
been taken. Proper use of the error handling in btusb_open()is needed.
You cannot just return.

Fixes: ace31982585a3 ("Bluetooth: btusb: Add setup callback for chip init on USB")
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bluetooth: Fix invalid-free in bcsp_close() 2019-11-28T17:29:02+00:00 Tomas Bortoli tomasbortoli@gmail.com 2019-11-01T20:42:44+00:00 368bc43ff0e9b166403029e5500ac1cc703c7c74 commit cf94da6f502d8caecabd56b194541c873c8a7a3c upstream. Syzbot reported an invalid-free that I introduced fixing a memleak. bcsp_recv() also frees bcsp->rx_skb but never nullifies its value. Nullify bcsp->rx_skb every time it is freed. Signed-off-by: Tomas Bortoli <tomasbortoli@gmail.com> Reported-by: syzbot+a0d209a4676664613e76@syzkaller.appspotmail.com Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit cf94da6f502d8caecabd56b194541c873c8a7a3c upstream.

Syzbot reported an invalid-free that I introduced fixing a memleak.

bcsp_recv() also frees bcsp->rx_skb but never nullifies its value.
Nullify bcsp->rx_skb every time it is freed.

Signed-off-by: Tomas Bortoli <tomasbortoli@gmail.com>
Reported-by: syzbot+a0d209a4676664613e76@syzkaller.appspotmail.com
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bluetooth: hci_ldisc: Postpone HCI_UART_PROTO_READY bit set in hci_uart_set_proto() 2019-11-16T09:29:34+00:00 Kefeng Wang wangkefeng.wang@huawei.com 2019-02-23T04:33:27+00:00 3858f013de0ae5a19b8276944e12fd01b0cac979 commit 56897b217a1d0a91c9920cb418d6b3fe922f590a upstream. task A: task B: hci_uart_set_proto flush_to_ldisc - p->open(hu) -> h5_open //alloc h5 - receive_buf - set_bit HCI_UART_PROTO_READY - tty_port_default_receive_buf - hci_uart_register_dev - tty_ldisc_receive_buf - hci_uart_tty_receive - test_bit HCI_UART_PROTO_READY - h5_recv - clear_bit HCI_UART_PROTO_READY while() { - p->open(hu) -> h5_close //free h5 - h5_rx_3wire_hdr - h5_reset() //use-after-free } It could use ioctl to set hci uart proto, but there is a use-after-free issue when hci_uart_register_dev() fail in hci_uart_set_proto(), see stack above, fix this by setting HCI_UART_PROTO_READY bit only when hci_uart_register_dev() return success. Reported-by: syzbot+899a33dc0fa0dbaf06a6@syzkaller.appspotmail.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Jeremy Cline <jcline@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 56897b217a1d0a91c9920cb418d6b3fe922f590a upstream.

task A:                                task B:
hci_uart_set_proto                     flush_to_ldisc
 - p->open(hu) -> h5_open  //alloc h5  - receive_buf
 - set_bit HCI_UART_PROTO_READY         - tty_port_default_receive_buf
 - hci_uart_register_dev                 - tty_ldisc_receive_buf
                                          - hci_uart_tty_receive
				           - test_bit HCI_UART_PROTO_READY
				            - h5_recv
 - clear_bit HCI_UART_PROTO_READY             while() {
 - p->open(hu) -> h5_close //free h5
				              - h5_rx_3wire_hdr
				               - h5_reset()  //use-after-free
                                              }

It could use ioctl to set hci uart proto, but there is
a use-after-free issue when hci_uart_register_dev() fail in
hci_uart_set_proto(), see stack above, fix this by setting
HCI_UART_PROTO_READY bit only when hci_uart_register_dev()
return success.

Reported-by: syzbot+899a33dc0fa0dbaf06a6@syzkaller.appspotmail.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Jeremy Cline <jcline@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bluetooth: btrtl: Additional Realtek 8822CE Bluetooth devices 2019-10-05T10:30:12+00:00 Jian-Hong Pan jian-hong@endlessm.com 2019-09-03T09:10:42+00:00 d272e49dc8d575e8271902019afa5cf387db5686 [ Upstream commit 6d0762b19c5963ff9e178e8af3626532ee04d93d ] The ASUS X412FA laptop contains a Realtek RTL8822CE device with an associated BT chip using a USB ID of 04ca:4005. This ID is added to the driver. The /sys/kernel/debug/usb/devices portion for this device is: T: Bus=01 Lev=01 Prnt=01 Port=09 Cnt=04 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=4005 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=204707 Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 6d0762b19c5963ff9e178e8af3626532ee04d93d ]

The ASUS X412FA laptop contains a Realtek RTL8822CE device with an
associated BT chip using a USB ID of 04ca:4005. This ID is added to the
driver.

The /sys/kernel/debug/usb/devices portion for this device is:

T:  Bus=01 Lev=01 Prnt=01 Port=09 Cnt=04 Dev#=  4 Spd=12   MxCh= 0
D:  Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=04ca ProdID=4005 Rev= 0.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Radio
S:  SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=204707
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bluetooth: btqca: Add a short delay before downloading the NVM 2019-09-10T09:31:00+00:00 Matthias Kaehlcke mka@chromium.org 2019-07-09T22:44:50+00:00 59d763634c2591add52ffbc9d851f1de1e8bbf3c [ Upstream commit 8059ba0bd0e4694e51c2ee6438a77b325f06c0d5 ] On WCN3990 downloading the NVM sometimes fails with a "TLV response size mismatch" error: [ 174.949955] Bluetooth: btqca.c:qca_download_firmware() hci0: QCA Downloading qca/crnv21.bin [ 174.958718] Bluetooth: btqca.c:qca_tlv_send_segment() hci0: QCA TLV response size mismatch It seems the controller needs a short time after downloading the firmware before it is ready for the NVM. A delay as short as 1 ms seems sufficient, make it 10 ms just in case. No event is received during the delay, hence we don't just silently drop an extra event. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 8059ba0bd0e4694e51c2ee6438a77b325f06c0d5 ]

On WCN3990 downloading the NVM sometimes fails with a "TLV response
size mismatch" error:

[  174.949955] Bluetooth: btqca.c:qca_download_firmware() hci0: QCA Downloading qca/crnv21.bin
[  174.958718] Bluetooth: btqca.c:qca_tlv_send_segment() hci0: QCA TLV response size mismatch

It seems the controller needs a short time after downloading the
firmware before it is ready for the NVM. A delay as short as 1 ms
seems sufficient, make it 10 ms just in case. No event is received
during the delay, hence we don't just silently drop an extra event.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bluetooth: hci_uart: check for missing tty operations 2019-08-04T07:33:44+00:00 Vladis Dronov vdronov@redhat.com 2019-07-30T09:33:45+00:00 58a01b0bd8ea5fddb51d4d854bb149a1a7312c12 commit b36a1552d7319bbfd5cf7f08726c23c5c66d4f73 upstream. Certain ttys operations (pty_unix98_ops) lack tiocmget() and tiocmset() functions which are called by the certain HCI UART protocols (hci_ath, hci_bcm, hci_intel, hci_mrvl, hci_qca) via hci_uart_set_flow_control() or directly. This leads to an execution at NULL and can be triggered by an unprivileged user. Fix this by adding a helper function and a check for the missing tty operations in the protocols code. This fixes CVE-2019-10207. The Fixes: lines list commits where calls to tiocm[gs]et() or hci_uart_set_flow_control() were added to the HCI UART protocols. Link: https://syzkaller.appspot.com/bug?id=1b42faa2848963564a5b1b7f8c837ea7b55ffa50 Reported-by: syzbot+79337b501d6aa974d0f6@syzkaller.appspotmail.com Cc: stable@vger.kernel.org # v2.6.36+ Fixes: b3190df62861 ("Bluetooth: Support for Atheros AR300x serial chip") Fixes: 118612fb9165 ("Bluetooth: hci_bcm: Add suspend/resume PM functions") Fixes: ff2895592f0f ("Bluetooth: hci_intel: Add Intel baudrate configuration support") Fixes: 162f812f23ba ("Bluetooth: hci_uart: Add Marvell support") Fixes: fa9ad876b8e0 ("Bluetooth: hci_qca: Add support for Qualcomm Bluetooth chip wcn3990") Signed-off-by: Vladis Dronov <vdronov@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Reviewed-by: Yu-Chen, Cho <acho@suse.com> Tested-by: Yu-Chen, Cho <acho@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b36a1552d7319bbfd5cf7f08726c23c5c66d4f73 upstream.

Certain ttys operations (pty_unix98_ops) lack tiocmget() and tiocmset()
functions which are called by the certain HCI UART protocols (hci_ath,
hci_bcm, hci_intel, hci_mrvl, hci_qca) via hci_uart_set_flow_control()
or directly. This leads to an execution at NULL and can be triggered by
an unprivileged user. Fix this by adding a helper function and a check
for the missing tty operations in the protocols code.

This fixes CVE-2019-10207. The Fixes: lines list commits where calls to
tiocm[gs]et() or hci_uart_set_flow_control() were added to the HCI UART
protocols.

Link: https://syzkaller.appspot.com/bug?id=1b42faa2848963564a5b1b7f8c837ea7b55ffa50
Reported-by: syzbot+79337b501d6aa974d0f6@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org # v2.6.36+
Fixes: b3190df62861 ("Bluetooth: Support for Atheros AR300x serial chip")
Fixes: 118612fb9165 ("Bluetooth: hci_bcm: Add suspend/resume PM functions")
Fixes: ff2895592f0f ("Bluetooth: hci_intel: Add Intel baudrate configuration support")
Fixes: 162f812f23ba ("Bluetooth: hci_uart: Add Marvell support")
Fixes: fa9ad876b8e0 ("Bluetooth: hci_qca: Add support for Qualcomm Bluetooth chip wcn3990")
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: Yu-Chen, Cho <acho@suse.com>
Tested-by: Yu-Chen, Cho <acho@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bluetooth: hci_bcsp: Fix memory leak in rx_skb 2019-08-04T07:33:24+00:00 Tomas Bortoli tomasbortoli@gmail.com 2019-05-28T13:42:58+00:00 fa729a351b7a5189ae00fff03852d9ecb79685cd [ Upstream commit 4ce9146e0370fcd573f0372d9b4e5a211112567c ] Syzkaller found that it is possible to provoke a memory leak by never freeing rx_skb in struct bcsp_struct. Fix by freeing in bcsp_close() Signed-off-by: Tomas Bortoli <tomasbortoli@gmail.com> Reported-by: syzbot+98162c885993b72f19c4@syzkaller.appspotmail.com Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 4ce9146e0370fcd573f0372d9b4e5a211112567c ]

Syzkaller found that it is possible to provoke a memory leak by
never freeing rx_skb in struct bcsp_struct.

Fix by freeing in bcsp_close()

Signed-off-by: Tomas Bortoli <tomasbortoli@gmail.com>
Reported-by: syzbot+98162c885993b72f19c4@syzkaller.appspotmail.com
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>