linux-stable.git/drivers/bluetooth, branch v4.19.136

Bluetooth: hci_bcm: fix freeing not-requested IRQ

2020-06-22T07:05:26+00:00

commit 81bd5d0c62437c02caac6b3f942fcda874063cb0 upstream.

When BT module can't be initialized, but it has an IRQ, unloading
the driver WARNs when trying to free not-yet-requested IRQ. Fix it by
noting whether the IRQ was requested.

WARNING: CPU: 2 PID: 214 at kernel/irq/devres.c:144 devm_free_irq+0x49/0x4ca
[...]
WARNING: CPU: 2 PID: 214 at kernel/irq/manage.c:1746 __free_irq+0x8b/0x27c
Trying to free already-free IRQ 264
Modules linked in: hci_uart(-) btbcm bluetooth ecdh_generic ecc libaes
CPU: 2 PID: 214 Comm: rmmod Tainted: G        W         5.6.1mq-00044-ga5f9ea098318-dirty #928
[...]
[] (devm_free_irq) from [] (bcm_close+0x97/0x118 [hci_uart])
[] (bcm_close [hci_uart]) from [] (hci_uart_unregister_device+0x33/0x3c [hci_uart])
[] (hci_uart_unregister_device [hci_uart]) from [] (serdev_drv_remove+0x13/0x20)
[] (serdev_drv_remove) from [] (device_release_driver_internal+0x97/0x118)
[] (device_release_driver_internal) from [] (driver_detach+0x2f/0x58)
[] (driver_detach) from [] (bus_remove_driver+0x41/0x94)
[] (bus_remove_driver) from [] (bcm_deinit+0x1b/0x740 [hci_uart])
[] (bcm_deinit [hci_uart]) from [] (hci_uart_exit+0x13/0x30 [hci_uart])
[] (hci_uart_exit [hci_uart]) from [] (sys_delete_module+0x109/0x1d0)
[] (sys_delete_module) from [] (ret_fast_syscall+0x1/0x5a)
[...]

Cc: stable@vger.kernel.org
Fixes: 6cc4396c8829 ("Bluetooth: hci_bcm: Add wake-up capability")
Signed-off-by: Michał Mirosław 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: btbcm: Add 2 missing models to subver tables

2020-06-22T07:05:13+00:00

[ Upstream commit c03ee9af4e07112bd3fc688daca9e654f41eca93 ]

Currently the bcm_uart_subver_ and bcm_usb_subver_table-s lack entries
for the BCM4324B5 and BCM20703A1 chipsets. This makes the code use just
"BCM" as prefix for the filename to pass to request-firmware, making it
harder for users to figure out which firmware they need. This especially
is problematic with the UART attached BCM4324B5 where this leads to the
filename being just "BCM.hcd".

Add the 2 missing devices to subver tables. This has been tested on:

1. A Dell XPS15 9550 where this makes btbcm.c try to load
"BCM20703A1-0a5c-6410.hcd" before it tries to load "BCM-0a5c-6410.hcd".

2. A Thinkpad 8 where this makes btbcm.c try to load
"BCM4324B5.hcd" before it tries to load "BCM.hcd"

Signed-off-by: Hans de Goede 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin

Bluetooth: btusb: fix PM leak in error case of setup

2020-01-09T09:19:04+00:00

commit 3d44a6fd0775e6215e836423e27f8eedf8c871ea upstream.

If setup() fails a reference for runtime PM has already
been taken. Proper use of the error handling in btusb_open()is needed.
You cannot just return.

Fixes: ace31982585a3 ("Bluetooth: btusb: Add setup callback for chip init on USB")
Signed-off-by: Oliver Neukum 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: hci_bcm: Handle specific unknown packets after firmware loading

2019-12-05T08:20:39+00:00

[ Upstream commit 22bba80500fdf624a7cfbb65fdfa97a038ae224d ]

The Broadcom controller on aries S5PV210 boards sends out a couple of
unknown packets after the firmware is loaded.  This will cause
logging of errors such as:
	Bluetooth: hci0: Frame reassembly failed (-84)

This is probably also the case with other boards, as there are related
Android userspace patches for custom ROMs such as
https://review.lineageos.org/#/c/LineageOS/android_system_bt/+/142721/
Since this appears to be intended behaviour, treated them as diagnostic
packets.

Note that this is another variant of commit 01d5e44ace8a
("Bluetooth: hci_bcm: Handle empty packet after firmware loading")

Signed-off-by: Jonathan Bakker 
Signed-off-by: Paweł Chmiel 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin

Bluetooth: Fix invalid-free in bcsp_close()

2019-12-01T08:17:35+00:00

commit cf94da6f502d8caecabd56b194541c873c8a7a3c upstream.

Syzbot reported an invalid-free that I introduced fixing a memleak.

bcsp_recv() also frees bcsp->rx_skb but never nullifies its value.
Nullify bcsp->rx_skb every time it is freed.

Signed-off-by: Tomas Bortoli 
Reported-by: syzbot+a0d209a4676664613e76@syzkaller.appspotmail.com
Signed-off-by: Marcel Holtmann 
Cc: Alexander Potapenko 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: btrsi: fix bt tx timeout issue

2019-11-20T17:47:42+00:00

[ Upstream commit 7cbfd1e2aad410d96fa6162aeb3f9cff1fecfc58 ]

observed sometimes data is coming with unaligned address from kernel
BT stack. If unaligned address is passed, some data in payload is
stripped when packet is loading to firmware and this results, BT
connection timeout is happening.

sh# hciconfig hci0 up
Can't init device hci0: hci0 command 0x0c03 tx timeout

Fixed this by moving the data to aligned address.

Signed-off-by: Sanjay Kumar Konduri 
Signed-off-by: Siva Rebbagondla 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin

Bluetooth: hci_serdev: clear HCI_UART_PROTO_READY to avoid closing proto races

2019-11-20T17:47:42+00:00

[ Upstream commit 7cf7846d27bfc9731e449857db3eec5e0e9701ba ]

Clearing HCI_UART_PROTO_READY will avoid usage of proto function pointers
before running the proto close function pointer. There is chance of kernel
crash, due to usage of non proto close function pointers after proto close.

Signed-off-by: Balakrishna Godavarthi 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin

Bluetooth: btrtl: Additional Realtek 8822CE Bluetooth devices

2019-10-01T06:26:12+00:00

[ Upstream commit 6d0762b19c5963ff9e178e8af3626532ee04d93d ]

The ASUS X412FA laptop contains a Realtek RTL8822CE device with an
associated BT chip using a USB ID of 04ca:4005. This ID is added to the
driver.

The /sys/kernel/debug/usb/devices portion for this device is:

T:  Bus=01 Lev=01 Prnt=01 Port=09 Cnt=04 Dev#=  4 Spd=12   MxCh= 0
D:  Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=04ca ProdID=4005 Rev= 0.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Radio
S:  SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=204707
Signed-off-by: Jian-Hong Pan 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin

Bluetooth: btrtl: HCI reset on close for Realtek BT chip

2019-10-01T06:26:11+00:00

[ Upstream commit 7af3f558aca74f2ee47b173f1c27f6bb9a5b5561 ]

Realtek RTL8822BE BT chip on ASUS X420FA cannot be turned on correctly
after on-off several times. Bluetooth daemon sets BT mode failed when
this issue happens. Scanning must be active while turning off for this
bug to be hit.

bluetoothd[1576]: Failed to set mode: Failed (0x03)

If BT is turned off, then turned on again, it works correctly again.

According to the vendor driver, the HCI_QUIRK_RESET_ON_CLOSE flag is set
during probing. So, this patch makes Realtek's BT reset on close to fix
this issue.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=203429
Signed-off-by: Jian-Hong Pan 
Reviewed-by: Daniel Drake 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin

Revert "Bluetooth: btusb: driver to enable the usb-wakeup feature"

2019-09-19T07:09:40+00:00

commit 1ffdb51f28e8ec6be0a2b812c1765b5cf5c44a8f upstream.

This reverts commit a0085f2510e8976614ad8f766b209448b385492f.

This commit has caused regressions in notebooks that support suspend
to idle such as the XPS 9360, XPS 9370 and XPS 9380.

These notebooks will wakeup from suspend to idle from an unsolicited
advertising packet from an unpaired BLE device.

In a bug report it was sugggested that this is caused by a generic
lack of LE privacy support.  Revert this commit until that behavior
can be avoided by the kernel.

Fixes: a0085f2510e8 ("Bluetooth: btusb: driver to enable the usb-wakeup feature")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=200039
Link: https://marc.info/?l=linux-bluetooth&m=156441081612627&w=2
Link: https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/750073/
CC: Bastien Nocera 
CC: Christian Kellner 
CC: Sukumar Ghorai 
Signed-off-by: Mario Limonciello 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Greg Kroah-Hartman