linux-stable.git/drivers/bluetooth, branch v4.14.41

Bluetooth: btusb: Only check needs_reset_resume DMI table for QCA rome chipsets

2018-05-16T08:10:30+00:00

commit fc54910280eb38bde923cdf0898e74687d8e6989 upstream.

Jeremy Cline correctly points out in rhbz#1514836 that a device where the
QCA rome chipset needs the USB_QUIRK_RESET_RESUME quirk, may also ship
with a different wifi/bt chipset in some configurations.

If that is the case then we are needlessly penalizing those other chipsets
with a reset-resume quirk, typically causing 0.4W extra power use because
this disables runtime-pm.

This commit moves the DMI table check to a btusb_check_needs_reset_resume()
helper (so that we can easily also call it for other chipsets) and calls
this new helper only for QCA_ROME chipsets for now.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1514836
Cc: stable@vger.kernel.org
Cc: Jeremy Cline 
Suggested-by: Jeremy Cline 
Signed-off-by: Hans de Goede 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: btusb: Add Dell XPS 13 9360 to btusb_needs_reset_resume_table

2018-05-16T08:10:30+00:00

commit 596b07a9a22656493726edf1739569102bd3e136 upstream.

The Dell XPS 13 9360 uses a QCA Rome chip which needs to be reset
(and have its firmware reloaded) for bluetooth to work after
suspend/resume.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1514836
Cc: stable@vger.kernel.org
Cc: Garrett LeSage 
Reported-and-tested-by: Garrett LeSage 
Signed-off-by: Hans de Goede 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Greg Kroah-Hartman

Revert "Bluetooth: btusb: Fix quirk for Atheros 1525/QCA6174"

2018-05-16T08:10:29+00:00

commit 544a591668813583021474fa5c7ff4942244d654 upstream.

Commit f44cb4b19ed4 ("Bluetooth: btusb: Fix quirk for Atheros
1525/QCA6174") is causing bluetooth to no longer work for several
people, see: https://bugzilla.redhat.com/show_bug.cgi?id=1568911

So lets revert it for now and try to find another solution for
devices which need the modified quirk.

Cc: stable@vger.kernel.org
Cc: Takashi Iwai 
Signed-off-by: Hans de Goede 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: hci_bcm: Treat Interrupt ACPI resources as always being active-low

2018-04-19T06:56:19+00:00

commit bb5208b314c5127b716b2ee4f55803a8bb73b750 upstream.

Older devices with a serdev attached bcm bt hci, use an Interrupt ACPI
resource to describe the IRQ (rather then a GpioInt resource).

These device seem to all claim the IRQ is active-high and seem to all need
a DMI quirk to treat it as active-low. Instead simply always assume that
Interrupt resource specified IRQs are always active-low.

This fixes the bt device not being able to wake the host from runtime-
suspend on the: Asus T100TAM, Asus T200TA, Lenovo Yoga2 and the Toshiba
Encore, without the need to add 4 new DMI quirks for these models.

This also allows us to remove 2 DMI quirks for the Asus T100TA and Asus
T100CHI series. Likely the 2 remaining quirks can also be removed but I
could not find a DSDT of these devices to verify this.

Cc: stable@vger.kernel.org
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=198953
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1554835
Signed-off-by: Hans de Goede 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: Add a new 04ca:3015 QCA_ROME device

2018-04-12T10:32:11+00:00

[ Upstream commit 0a03f98b98c201191e3ba15a0e33f46d8660e1fd ]

This patch adds the 04ca:3015 (from a QCA9377 board) Bluetooth device
to the btusb blacklist and makes the kernel use the btqca module
instead of btusb. The patch is necessary because, without it the
04ca:3015 device defaults to using the btusb driver, which makes the
WIFI side of the QCA9377 board unusable (obtains 0 MBps in speedtest,
when the 04ca:3015 bluetooth is used with an audio headset).

/sys/kernel/debug/usb/devices:

    T:  Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#=  2 Spd=12   MxCh= 0
    D:  Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
    P:  Vendor=04ca ProdID=3015 Rev= 0.01
    C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
    I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
    E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
    E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
    I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
    I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
    I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
    I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
    I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
    I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: Ioan Moldovan 
Signed-off-by: Johan Hedberg 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: btusb: Fix quirk for Atheros 1525/QCA6174

2018-03-28T16:24:35+00:00

commit f44cb4b19ed40b655c2d422c9021ab2c2625adb6 upstream.

The Atheros 1525/QCA6174 BT doesn't seem working properly on the
recent kernels, as it tries to load a wrong firmware
ar3k/AthrBT_0x00000200.dfu and it fails.

This seems to have been a problem for some time, and the known
workaround is to apply BTUSB_QCA_ROM quirk instead of BTUSB_ATH3012.

The device in question is:

T: Bus=01 Lev=01 Prnt=01 Port=09 Cnt=03 Dev#=  4 Spd=12   MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P: Vendor=0cf3 ProdID=3004 Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Bugzilla: http://bugzilla.opensuse.org/show_bug.cgi?id=1082504
Reported-by: Ivan Levshin 
Tested-by: Ivan Levshin 
Cc: 
Signed-off-by: Takashi Iwai 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: btusb: Add Dell OptiPlex 3060 to btusb_needs_reset_resume_table

2018-03-28T16:24:34+00:00

commit 0c6e526646c04ce31d4aaa280ed2237dd1cd774c upstream.

The issue can be reproduced before commit fd865802c66b ("Bluetooth:
btusb: fix QCA Rome suspend/resume") gets introduced, so the reset
resume quirk is still needed for this system.

T:  Bus=01 Lev=01 Prnt=01 Port=13 Cnt=01 Dev#=  4 Spd=12  MxCh= 0
D:  Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0cf3 ProdID=e007 Rev=00.01
C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

Cc: stable@vger.kernel.org
Cc: Brian Norris 
Cc: Hans de Goede 
Signed-off-by: Kai-Heng Feng 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: btusb: Remove Yoga 920 from the btusb_needs_reset_resume_table

2018-03-28T16:24:34+00:00

commit f0e8c61110c2c85903b136ba070daf643a8b6842 upstream.

Commit 1fdb92697469 ("Bluetooth: btusb: Use DMI matching for QCA
reset_resume quirking"), added the Lenovo Yoga 920 to the
btusb_needs_reset_resume_table.

Testing has shown that this is a false positive and the problems where
caused by issues with the initial fix: commit fd865802c66b ("Bluetooth:
btusb: fix QCA Rome suspend/resume"), which has already been reverted.

So the QCA Rome BT in the Yoga 920 does not need a reset-resume quirk at
all and this commit removes it from the btusb_needs_reset_resume_table.

Note that after this commit the btusb_needs_reset_resume_table is now
empty. It is kept around on purpose, since this whole series of commits
started for a reason and there are actually broken platforms around,
which need to be added to it.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1514836
Fixes: 1fdb92697469 ("Bluetooth: btusb: Use DMI matching for QCA ...")
Cc: stable@vger.kernel.org
Cc: Brian Norris 
Cc: Kai-Heng Feng 
Tested-by: Kevin Fenzi 
Suggested-by: Brian Norris 
Signed-off-by: Hans de Goede 
Reviewed-by: Brian Norris 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: btqcomsmd: Fix skb double free corruption

2018-03-24T10:01:21+00:00

[ Upstream commit 67b8fbead4685b36d290a0ef91c6ddffc4920ec9 ]

In case of hci send frame failure, skb is still owned
by the caller (hci_core) and then should not be freed.

This fixes crash on dragonboard-410c when sending SCO
packet. skb is freed by both btqcomsmd and hci_core.

Fixes: 1511cc750c3d ("Bluetooth: Introduce Qualcomm WCNSS SMD based HCI driver")
Signed-off-by: Loic Poulain 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: hci_qca: Avoid setup failure on missing rampatch

2018-03-24T10:01:21+00:00

[ Upstream commit ba8f3597900291a93604643017fff66a14546015 ]

Assuming that the original code idea was to enable in-band sleeping
only if the setup_rome method returns succes and run in 'standard'
mode otherwise, we should not return setup_rome return value which
makes qca_setup fail if no rampatch/nvm file found.

This fixes BT issue on the dragonboard-820C p4 which includes the
following QCA controller:
hci0: Product:0x00000008
hci0: Patch  :0x00000111
hci0: ROM    :0x00000302
hci0: SOC    :0x00000044

Since there is no rampatch for this controller revision, just make
it work as is.

Signed-off-by: Loic Poulain 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman