linux-stable.git/drivers/bluetooth, branch v4.14.331 Linux kernel stable tree Bluetooth: vhci: Fix race when opening vhci device 2023-10-25T09:13:31+00:00 Arkadiusz Bokowy arkadiusz.bokowy@gmail.com 2023-09-20T15:30:07+00:00 ae40f2c3f3a7dc77095f33d41ebccf166aba960b commit 92d4abd66f7080075793970fc8f241239e58a9e7 upstream. When the vhci device is opened in the two-step way, i.e.: open device then write a vendor packet with requested controller type, the device shall respond with a vendor packet which includes HCI index of created interface. When the virtual HCI is created, the host sends a reset request to the controller. This request is processed by the vhci_send_frame() function. However, this request is send by a different thread, so it might happen that this HCI request will be received before the vendor response is queued in the read queue. This results in the HCI vendor response and HCI reset request inversion in the read queue which leads to improper behavior of btvirt: > dmesg [1754256.640122] Bluetooth: MGMT ver 1.22 [1754263.023806] Bluetooth: MGMT ver 1.22 [1754265.043775] Bluetooth: hci1: Opcode 0x c03 failed: -110 In order to synchronize vhci two-step open/setup process with virtual HCI initialization, this patch adds internal lock when queuing data in the vhci_send_frame() function. Signed-off-by: Arkadiusz Bokowy <arkadiusz.bokowy@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 92d4abd66f7080075793970fc8f241239e58a9e7 upstream.

When the vhci device is opened in the two-step way, i.e.: open device
then write a vendor packet with requested controller type, the device
shall respond with a vendor packet which includes HCI index of created
interface.

When the virtual HCI is created, the host sends a reset request to the
controller. This request is processed by the vhci_send_frame() function.
However, this request is send by a different thread, so it might happen
that this HCI request will be received before the vendor response is
queued in the read queue. This results in the HCI vendor response and
HCI reset request inversion in the read queue which leads to improper
behavior of btvirt:

> dmesg
[1754256.640122] Bluetooth: MGMT ver 1.22
[1754263.023806] Bluetooth: MGMT ver 1.22
[1754265.043775] Bluetooth: hci1: Opcode 0x c03 failed: -110

In order to synchronize vhci two-step open/setup process with virtual
HCI initialization, this patch adds internal lock when queuing data in
the vhci_send_frame() function.

Signed-off-by: Arkadiusz Bokowy <arkadiusz.bokowy@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bluetooth: nokia: fix value check in nokia_bluetooth_serdev_probe() 2023-09-23T08:46:55+00:00 Yuanjun Gong ruc_gongyuanjun@163.com 2023-07-26T13:30:00+00:00 9fbf0be47df52130889205aae05ec93e48896f64 [ Upstream commit e8b5aed31355072faac8092ead4938ddec3111fd ] in nokia_bluetooth_serdev_probe(), check the return value of clk_prepare_enable() and return the error code if clk_prepare_enable() returns an unexpected value. Fixes: 7bb318680e86 ("Bluetooth: add nokia driver") Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit e8b5aed31355072faac8092ead4938ddec3111fd ]

in nokia_bluetooth_serdev_probe(), check the return value of
clk_prepare_enable() and return the error code if
clk_prepare_enable() returns an unexpected value.

Fixes: 7bb318680e86 ("Bluetooth: add nokia driver")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bluetooth: btsdio: fix use after free bug in btsdio_remove due to race condition 2023-09-23T08:46:52+00:00 Zheng Wang zyytlz.wz@163.com 2023-03-08T16:45:01+00:00 6c3653627397a0d6eab19b20a59423e118985a6b commit 73f7b171b7c09139eb3c6a5677c200dc1be5f318 upstream. In btsdio_probe, the data->work is bound with btsdio_work. It will be started in btsdio_send_frame. If the btsdio_remove runs with a unfinished work, there may be a race condition that hdev is freed but used in btsdio_work. Fix it by canceling the work before do cleanup in btsdio_remove. Fixes: CVE-2023-1989 Fixes: ddbaf13e3609 ("[Bluetooth] Add generic driver for Bluetooth SDIO devices") Cc: stable@vger.kernel.org Signed-off-by: Zheng Wang <zyytlz.wz@163.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> [ Denis: Added CVE-2023-1989 and fixes tags. ] Signed-off-by: Denis Efremov (Oracle) <efremov@linux.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 73f7b171b7c09139eb3c6a5677c200dc1be5f318 upstream.

In btsdio_probe, the data->work is bound with btsdio_work. It will be
started in btsdio_send_frame.

If the btsdio_remove runs with a unfinished work, there may be a race
condition that hdev is freed but used in btsdio_work. Fix it by
canceling the work before do cleanup in btsdio_remove.

Fixes: CVE-2023-1989
Fixes: ddbaf13e3609 ("[Bluetooth] Add generic driver for Bluetooth SDIO devices")
Cc: stable@vger.kernel.org
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
[ Denis: Added CVE-2023-1989 and fixes tags. ]
Signed-off-by: Denis Efremov (Oracle) <efremov@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert "Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work" 2023-05-17T09:11:42+00:00 Liu Jian liujian56@huawei.com 2023-04-14T10:30:06+00:00 3b4ed52009723f7dfca7a8ca95163bfb441bfb76 [ Upstream commit db2bf510bd5d57f064d9e1db395ed86a08320c54 ] This reverts commit 1e9ac114c4428fdb7ff4635b45d4f46017e8916f. This patch introduces a possible null-ptr-def problem. Revert it. And the fixed bug by this patch have resolved by commit 73f7b171b7c0 ("Bluetooth: btsdio: fix use after free bug in btsdio_remove due to race condition"). Fixes: 1e9ac114c442 ("Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work") Signed-off-by: Liu Jian <liujian56@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit db2bf510bd5d57f064d9e1db395ed86a08320c54 ]

This reverts commit 1e9ac114c4428fdb7ff4635b45d4f46017e8916f.

This patch introduces a possible null-ptr-def problem. Revert it. And the
fixed bug by this patch have resolved by commit 73f7b171b7c0 ("Bluetooth:
btsdio: fix use after free bug in btsdio_remove due to race condition").

Fixes: 1e9ac114c442 ("Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work 2023-04-05T09:14:16+00:00 Zheng Wang zyytlz.wz@163.com 2023-03-09T08:07:39+00:00 95eacef5692545f199fae4e52abfbfa273acb351 [ Upstream commit 1e9ac114c4428fdb7ff4635b45d4f46017e8916f ] In btsdio_probe, &data->work was bound with btsdio_work.In btsdio_send_frame, it was started by schedule_work. If we call btsdio_remove with an unfinished job, there may be a race condition and cause UAF bug on hdev. Fixes: ddbaf13e3609 ("[Bluetooth] Add generic driver for Bluetooth SDIO devices") Signed-off-by: Zheng Wang <zyytlz.wz@163.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 1e9ac114c4428fdb7ff4635b45d4f46017e8916f ]

In btsdio_probe, &data->work was bound with btsdio_work.In
btsdio_send_frame, it was started by schedule_work.

If we call btsdio_remove with an unfinished job, there may
be a race condition and cause UAF bug on hdev.

Fixes: ddbaf13e3609 ("[Bluetooth] Add generic driver for Bluetooth SDIO devices")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bluetooth: btqcomsmd: Fix command timeout after setting BD address 2023-04-05T09:14:16+00:00 Stephan Gerhold stephan.gerhold@kernkonzept.com 2023-03-08T13:31:55+00:00 5f4c5c88878b20bca427e33e2f649b154824076c [ Upstream commit 5d44ab9e204200a78ad55cdf185aa2bb109b5950 ] On most devices using the btqcomsmd driver (e.g. the DragonBoard 410c and other devices based on the Qualcomm MSM8916/MSM8909/... SoCs) the Bluetooth firmware seems to become unresponsive for a while after setting the BD address. On recent kernel versions (at least 5.17+) this often causes timeouts for subsequent commands, e.g. the HCI reset sent by the Bluetooth core during initialization: Bluetooth: hci0: Opcode 0x c03 failed: -110 Unfortunately this behavior does not seem to be documented anywhere. Experimentation suggests that the minimum necessary delay to avoid the problem is ~150us. However, to be sure add a sleep for > 1ms in case it is a bit longer on other firmware versions. Older kernel versions are likely also affected, although perhaps with slightly different errors or less probability. Side effects can easily hide the issue in most cases, e.g. unrelated incoming interrupts that cause the necessary delay. Fixes: 1511cc750c3d ("Bluetooth: Introduce Qualcomm WCNSS SMD based HCI driver") Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 5d44ab9e204200a78ad55cdf185aa2bb109b5950 ]

On most devices using the btqcomsmd driver (e.g. the DragonBoard 410c
and other devices based on the Qualcomm MSM8916/MSM8909/... SoCs)
the Bluetooth firmware seems to become unresponsive for a while after
setting the BD address. On recent kernel versions (at least 5.17+)
this often causes timeouts for subsequent commands, e.g. the HCI reset
sent by the Bluetooth core during initialization:

    Bluetooth: hci0: Opcode 0x c03 failed: -110

Unfortunately this behavior does not seem to be documented anywhere.
Experimentation suggests that the minimum necessary delay to avoid
the problem is ~150us. However, to be sure add a sleep for > 1ms
in case it is a bit longer on other firmware versions.

Older kernel versions are likely also affected, although perhaps with
slightly different errors or less probability. Side effects can easily
hide the issue in most cases, e.g. unrelated incoming interrupts that
cause the necessary delay.

Fixes: 1511cc750c3d ("Bluetooth: Introduce Qualcomm WCNSS SMD based HCI driver")
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bluetooth: hci_bcsp: don't call kfree_skb() under spin_lock_irqsave() 2023-01-18T08:26:20+00:00 Yang Yingliang yangyingliang@huawei.com 2022-12-07T02:18:33+00:00 dbdbfc5c9527c5e46aa295c193956b90ec66ce57 [ Upstream commit 7b503e339c1a80bf0051ec2d19c3bc777014ac61 ] It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. So replace kfree_skb() with dev_kfree_skb_irq() under spin_lock_irqsave(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 7b503e339c1a80bf0051ec2d19c3bc777014ac61 ]

It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave().

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bluetooth: hci_h5: don't call kfree_skb() under spin_lock_irqsave() 2023-01-18T08:26:20+00:00 Yang Yingliang yangyingliang@huawei.com 2022-12-07T02:18:32+00:00 eca334739328f563bb9e01b9305e00a726c7f32b [ Upstream commit 383630cc6758d619874c2e8bb2f68a61f3f9ef6e ] It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. So replace kfree_skb() with dev_kfree_skb_irq() under spin_lock_irqsave(). Fixes: 43eb12d78960 ("Bluetooth: Fix/implement Three-wire reliable packet sending") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 383630cc6758d619874c2e8bb2f68a61f3f9ef6e ]

It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave().

Fixes: 43eb12d78960 ("Bluetooth: Fix/implement Three-wire reliable packet sending")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bluetooth: hci_qca: don't call kfree_skb() under spin_lock_irqsave() 2023-01-18T08:26:20+00:00 Yang Yingliang yangyingliang@huawei.com 2022-12-07T02:18:30+00:00 320d79430a3204ee8a0edb5542872555ee385bf9 [ Upstream commit df4cfc91208e0a98f078223793f5871b1a82cc54 ] It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. So replace kfree_skb() with dev_kfree_skb_irq() under spin_lock_irqsave(). Fixes: 0ff252c1976d ("Bluetooth: hciuart: Add support QCA chipset for UART") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit df4cfc91208e0a98f078223793f5871b1a82cc54 ]

It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave().

Fixes: 0ff252c1976d ("Bluetooth: hciuart: Add support QCA chipset for UART")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bluetooth: btusb: don't call kfree_skb() under spin_lock_irqsave() 2023-01-18T08:26:20+00:00 Yang Yingliang yangyingliang@huawei.com 2022-12-06T12:59:10+00:00 5a09096918eddd1634acb103d8e4dbfb043c03a6 [ Upstream commit b15a6bd3c80c77faec8317319b97f976b1a08332 ] It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. So replace kfree_skb() with dev_kfree_skb_irq() under spin_lock_irqsave(). Fixes: 803b58367ffb ("Bluetooth: btusb: Implement driver internal packet reassembly") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit b15a6bd3c80c77faec8317319b97f976b1a08332 ]

It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave().

Fixes: 803b58367ffb ("Bluetooth: btusb: Implement driver internal packet reassembly")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>