linux-stable.git/drivers/bluetooth, branch v4.14.232

Bluetooth: btqcomsmd: Fix a resource leak in error handling paths in the probe function

2021-03-03T17:22:37+00:00

[ Upstream commit 9a39a927be01d89e53f04304ab99a8761e08910d ]

Some resource should be released in the error handling path of the probe
function, as already done in the remove function.

The remove function was fixed in commit 5052de8deff5 ("soc: qcom: smd:
Transition client drivers from smd to rpmsg")

Fixes: 1511cc750c3d ("Bluetooth: Introduce Qualcomm WCNSS SMD based HCI driver")
Signed-off-by: Christophe JAILLET 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin

Bluetooth: hci_uart: Cancel init work before unregistering

2020-10-29T08:07:03+00:00

[ Upstream commit 3b799254cf6f481460719023d7a18f46651e5e7f ]

If hci_uart_tty_close() or hci_uart_unregister_device() is called while
hu->init_ready is scheduled, hci_register_dev() could be called after
the hci_uart is torn down. Avoid this by ensuring the work is complete
or canceled before checking the HCI_UART_REGISTERED flag.

Fixes: 9f2aee848fe6 ("Bluetooth: Add delayed init sequence support for UART controllers")
Signed-off-by: Samuel Holland 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin

Bluetooth: hci_serdev: Only unregister device if it was registered

2020-08-21T07:48:11+00:00

[ Upstream commit 202798db9570104728dce8bb57dfeed47ce764bc ]

We should not call hci_unregister_dev if the device was not
successfully registered.

Fixes: c34dc3bfa7642fd ("Bluetooth: hci_serdev: Introduce hci_uart_unregister_device()")
Signed-off-by: Nicolas Boichat 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin

Bluetooth: btusb: fix PM leak in error case of setup

2020-01-09T09:17:57+00:00

commit 3d44a6fd0775e6215e836423e27f8eedf8c871ea upstream.

If setup() fails a reference for runtime PM has already
been taken. Proper use of the error handling in btusb_open()is needed.
You cannot just return.

Fixes: ace31982585a3 ("Bluetooth: btusb: Add setup callback for chip init on USB")
Signed-off-by: Oliver Neukum 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: hci_bcm: Handle specific unknown packets after firmware loading

2019-12-05T14:37:37+00:00

[ Upstream commit 22bba80500fdf624a7cfbb65fdfa97a038ae224d ]

The Broadcom controller on aries S5PV210 boards sends out a couple of
unknown packets after the firmware is loaded.  This will cause
logging of errors such as:
	Bluetooth: hci0: Frame reassembly failed (-84)

This is probably also the case with other boards, as there are related
Android userspace patches for custom ROMs such as
https://review.lineageos.org/#/c/LineageOS/android_system_bt/+/142721/
Since this appears to be intended behaviour, treated them as diagnostic
packets.

Note that this is another variant of commit 01d5e44ace8a
("Bluetooth: hci_bcm: Handle empty packet after firmware loading")

Signed-off-by: Jonathan Bakker 
Signed-off-by: Paweł Chmiel 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin

Bluetooth: Fix invalid-free in bcsp_close()

2019-12-01T08:14:15+00:00

commit cf94da6f502d8caecabd56b194541c873c8a7a3c upstream.

Syzbot reported an invalid-free that I introduced fixing a memleak.

bcsp_recv() also frees bcsp->rx_skb but never nullifies its value.
Nullify bcsp->rx_skb every time it is freed.

Signed-off-by: Tomas Bortoli 
Reported-by: syzbot+a0d209a4676664613e76@syzkaller.appspotmail.com
Signed-off-by: Marcel Holtmann 
Cc: Alexander Potapenko 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: hci_serdev: clear HCI_UART_PROTO_READY to avoid closing proto races

2019-11-20T17:00:46+00:00

[ Upstream commit 7cf7846d27bfc9731e449857db3eec5e0e9701ba ]

Clearing HCI_UART_PROTO_READY will avoid usage of proto function pointers
before running the proto close function pointer. There is chance of kernel
crash, due to usage of non proto close function pointers after proto close.

Signed-off-by: Balakrishna Godavarthi 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin

Bluetooth: btrtl: Additional Realtek 8822CE Bluetooth devices

2019-10-05T10:47:39+00:00

[ Upstream commit 6d0762b19c5963ff9e178e8af3626532ee04d93d ]

The ASUS X412FA laptop contains a Realtek RTL8822CE device with an
associated BT chip using a USB ID of 04ca:4005. This ID is added to the
driver.

The /sys/kernel/debug/usb/devices portion for this device is:

T:  Bus=01 Lev=01 Prnt=01 Port=09 Cnt=04 Dev#=  4 Spd=12   MxCh= 0
D:  Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=04ca ProdID=4005 Rev= 0.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Radio
S:  SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=204707
Signed-off-by: Jian-Hong Pan 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin

Revert "Bluetooth: btusb: driver to enable the usb-wakeup feature"

2019-09-19T07:08:08+00:00

commit 1ffdb51f28e8ec6be0a2b812c1765b5cf5c44a8f upstream.

This reverts commit a0085f2510e8976614ad8f766b209448b385492f.

This commit has caused regressions in notebooks that support suspend
to idle such as the XPS 9360, XPS 9370 and XPS 9380.

These notebooks will wakeup from suspend to idle from an unsolicited
advertising packet from an unpaired BLE device.

In a bug report it was sugggested that this is caused by a generic
lack of LE privacy support.  Revert this commit until that behavior
can be avoided by the kernel.

Fixes: a0085f2510e8 ("Bluetooth: btusb: driver to enable the usb-wakeup feature")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=200039
Link: https://marc.info/?l=linux-bluetooth&m=156441081612627&w=2
Link: https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/750073/
CC: Bastien Nocera 
CC: Christian Kellner 
CC: Sukumar Ghorai 
Signed-off-by: Mario Limonciello 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: btqca: Add a short delay before downloading the NVM

2019-09-10T09:32:13+00:00

[ Upstream commit 8059ba0bd0e4694e51c2ee6438a77b325f06c0d5 ]

On WCN3990 downloading the NVM sometimes fails with a "TLV response
size mismatch" error:

[  174.949955] Bluetooth: btqca.c:qca_download_firmware() hci0: QCA Downloading qca/crnv21.bin
[  174.958718] Bluetooth: btqca.c:qca_tlv_send_segment() hci0: QCA TLV response size mismatch

It seems the controller needs a short time after downloading the
firmware before it is ready for the NVM. A delay as short as 1 ms
seems sufficient, make it 10 ms just in case. No event is received
during the delay, hence we don't just silently drop an extra event.

Signed-off-by: Matthias Kaehlcke 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin