linux-stable.git/drivers/bluetooth, branch linux-6.12.y Linux kernel stable tree Bluetooth: hci_intel: fix usage_count leak when autosuspend_delay is negative 2026-09-07T15:18:10+00:00 Guangshuo Li lgs201920130244@gmail.com 2026-08-08T05:30:57+00:00 0aa499eaaa37845eedd3847e0334d6d4ca4df90e commit c7e9a8cb6918656884a0757c92465075c7555ffa upstream. intel_set_power() calls pm_runtime_use_autosuspend() when powering on the device, but the power-off path does not call the matching pm_runtime_dont_use_autosuspend() before disabling runtime PM. If the autosuspend delay is set to a negative value while autosuspend is enabled, the runtime PM core increments usage_count to prevent runtime suspend. Without calling pm_runtime_dont_use_autosuspend() during teardown, this reference is not dropped and usage_count remains unbalanced. Add the missing pm_runtime_dont_use_autosuspend() call before disabling runtime PM. This issue was found by manual code inspection. Fixes: 74cdad37cd24 ("Bluetooth: hci_intel: Add runtime PM support") Cc: stable@vger.kernel.org Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c7e9a8cb6918656884a0757c92465075c7555ffa upstream.

intel_set_power() calls pm_runtime_use_autosuspend() when powering on
the device, but the power-off path does not call the matching
pm_runtime_dont_use_autosuspend() before disabling runtime PM.

If the autosuspend delay is set to a negative value while autosuspend
is enabled, the runtime PM core increments usage_count to prevent
runtime suspend. Without calling pm_runtime_dont_use_autosuspend()
during teardown, this reference is not dropped and usage_count remains
unbalanced.

Add the missing pm_runtime_dont_use_autosuspend() call before disabling
runtime PM.

This issue was found by manual code inspection.

Fixes: 74cdad37cd24 ("Bluetooth: hci_intel: Add runtime PM support")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bluetooth: hci_h5: fix usage_count leak when autosuspend_delay is negative 2026-09-07T15:18:10+00:00 Guangshuo Li lgs201920130244@gmail.com 2026-08-08T05:26:54+00:00 8d1e0bec6081b43030a0bd9d559f56975857ed5e commit 853a92b97ca547a7ddd9790ff90651b2fd943498 upstream. h5_btrtl_open() calls pm_runtime_use_autosuspend(), but h5_btrtl_close() does not call the matching pm_runtime_dont_use_autosuspend() when tearing down runtime PM. If the autosuspend delay is set to a negative value while autosuspend is enabled, the runtime PM core increments usage_count to prevent runtime suspend. Without calling pm_runtime_dont_use_autosuspend() during driver teardown, this reference is not dropped and usage_count remains unbalanced. Add the missing pm_runtime_dont_use_autosuspend() call before disabling runtime PM. This issue was found by manual code inspection. Fixes: d9dd833cf6d2 ("Bluetooth: hci_h5: Add runtime suspend") Cc: stable@vger.kernel.org Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 853a92b97ca547a7ddd9790ff90651b2fd943498 upstream.

h5_btrtl_open() calls pm_runtime_use_autosuspend(), but
h5_btrtl_close() does not call the matching
pm_runtime_dont_use_autosuspend() when tearing down runtime PM.

If the autosuspend delay is set to a negative value while autosuspend
is enabled, the runtime PM core increments usage_count to prevent
runtime suspend. Without calling pm_runtime_dont_use_autosuspend()
during driver teardown, this reference is not dropped and usage_count
remains unbalanced.

Add the missing pm_runtime_dont_use_autosuspend() call before disabling
runtime PM.

This issue was found by manual code inspection.

Fixes: d9dd833cf6d2 ("Bluetooth: hci_h5: Add runtime suspend")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bluetooth: hci_uart: Fix false success return in hci_uart_setup() 2026-09-07T15:18:09+00:00 Gongwei Li ligongwei@kylinos.cn 2026-08-21T02:45:55+00:00 f14c0d9264fbf1b078be5bbfa427f2e9fa18acca commit a9355799343e10014f2acfd4b6844d2335ecafea upstream. When reading the local version information for vendor detection fails, the error is only printed and 0 is returned, which masks the setup failure from the HCI core. Return PTR_ERR(skb) instead. Fixes: fb2ce8d11f039 ("Bluetooth: hci_uart: Add support for vendor detection flag") Fixes: 82f5169bf3d3b ("Bluetooth: hci_uart: add serdev driver support library") Cc: stable@vger.kernel.org Signed-off-by: Gongwei Li <ligongwei@kylinos.cn> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a9355799343e10014f2acfd4b6844d2335ecafea upstream.

When reading the local version information for vendor detection
fails, the error is only printed and 0 is returned, which masks the
setup failure from the HCI core.

Return PTR_ERR(skb) instead.

Fixes: fb2ce8d11f039 ("Bluetooth: hci_uart: Add support for vendor detection flag")
Fixes: 82f5169bf3d3b ("Bluetooth: hci_uart: add serdev driver support library")
Cc: stable@vger.kernel.org
Signed-off-by: Gongwei Li <ligongwei@kylinos.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bluetooth: hci_bcm: fix usage_count leak when autosuspend_delay is negative 2026-09-07T15:18:09+00:00 Guangshuo Li lgs201920130244@gmail.com 2026-08-08T05:15:32+00:00 1778aad971a611a1e671c1d74048ef9d61453716 commit dc6b7c771a963e20aedf4a21ffa22543b9837ba8 upstream. bcm_request_irq() calls pm_runtime_use_autosuspend(), but bcm_close() does not call the matching pm_runtime_dont_use_autosuspend() when tearing down runtime PM. If the autosuspend delay is set to a negative value while autosuspend is enabled, the runtime PM core increments usage_count to prevent runtime suspend. Without calling pm_runtime_dont_use_autosuspend() during driver teardown, this reference is not dropped and usage_count remains unbalanced. Add the missing pm_runtime_dont_use_autosuspend() call before disabling runtime PM. This issue was found by manual code inspection. Fixes: e88ab30d3669 ("Bluetooth: hci_bcm: Add suspend/resume runtime PM functions") Cc: stable@vger.kernel.org Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit dc6b7c771a963e20aedf4a21ffa22543b9837ba8 upstream.

bcm_request_irq() calls pm_runtime_use_autosuspend(), but bcm_close()
does not call the matching pm_runtime_dont_use_autosuspend() when
tearing down runtime PM.

If the autosuspend delay is set to a negative value while autosuspend
is enabled, the runtime PM core increments usage_count to prevent
runtime suspend. Without calling pm_runtime_dont_use_autosuspend()
during driver teardown, this reference is not dropped and usage_count
remains unbalanced.

Add the missing pm_runtime_dont_use_autosuspend() call before disabling
runtime PM.

This issue was found by manual code inspection.

Fixes: e88ab30d3669 ("Bluetooth: hci_bcm: Add suspend/resume runtime PM functions")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bluetooth: hci_bcm4377: Ignore reserved PHY in ext adv reports on BCM4378 2026-09-07T15:18:09+00:00 Lorenzo Stoakes (ARM) ljs@kernel.org 2026-08-18T09:49:34+00:00 e2862cd4639ffac5faceed3e8a5fbabb0d81cc1b commit aec6a8d80e3da0ab5c9303a0281fd06d077f8716 upstream. Commit ed2a2ef16a6b ("Bluetooth: Add quirk to ignore reserved PHY bits in LE Extended Adv Report") added a quirk to handle creative use of the reserved bits in the PHY fields for 4388 controllers in Apple silicon. I observed the same issue with the BCM4378 Bluetooth controller (14e4:5f69, rev 05) on an Apple MacBook Pro (13-inch, M2, 2022): > HCI Event: LE Meta Event (0x3e) plen 51 LE Extended Advertising Report (0x0d) Num reports: 1 Entry 0 Event type: 0x2513 Props: 0x0013 Connectable Scannable Use legacy advertising PDUs Data status: Complete Reserved (0x2500) Legacy PDU Type: Reserved (0x2513) Address type: Random (0x01) Address: EA:C1:82:F0:24:C6 (Static) Primary PHY: Reserved Secondary PHY: No packets SID: no ADI field (0xff) TX power: 127 dBm RSSI: -57 dBm (0xc7) Periodic advertising interval: 0.00 msec (0x0000) Direct address type: Public (0x00) Direct address: 00:00:00:00:00:00 (OUI 00-00-00) Data length: 25 This results in the firmware rejecting connection attempts with "Unsupported Feature or Parameter Value" (0x11). Fix the issue by using the same quirk for BCM4378 devices too. I tested this locally and confirmed that the issue is resolved. This was observed when attempting to connect a Kinesis Advantage 360 keyboard to the MacBook. Assisted-by: Claude:claude-fable-5 Fixes: 2e7ed5f5e69b ("Bluetooth: hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync") Cc: stable@vger.kernel.org Signed-off-by: Lorenzo Stoakes (ARM) <ljs@kernel.org> Reviewed-by: Sven Peter <sven@kernel.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit aec6a8d80e3da0ab5c9303a0281fd06d077f8716 upstream.

Commit ed2a2ef16a6b ("Bluetooth: Add quirk to ignore reserved PHY bits in
LE Extended Adv Report") added a quirk to handle creative use of the
reserved bits in the PHY fields for 4388 controllers in Apple silicon.

I observed the same issue with the BCM4378 Bluetooth controller (14e4:5f69,
rev 05) on an Apple MacBook Pro (13-inch, M2, 2022):

> HCI Event: LE Meta Event (0x3e) plen 51
      LE Extended Advertising Report (0x0d)
        Num reports: 1
        Entry 0
          Event type: 0x2513
            Props: 0x0013
              Connectable
              Scannable
              Use legacy advertising PDUs
            Data status: Complete
            Reserved (0x2500)
          Legacy PDU Type: Reserved (0x2513)
          Address type: Random (0x01)
          Address: EA:C1:82:F0:24:C6 (Static)
          Primary PHY: Reserved
          Secondary PHY: No packets
          SID: no ADI field (0xff)
          TX power: 127 dBm
          RSSI: -57 dBm (0xc7)
          Periodic advertising interval: 0.00 msec (0x0000)
          Direct address type: Public (0x00)
          Direct address: 00:00:00:00:00:00 (OUI 00-00-00)
          Data length: 25

This results in the firmware rejecting connection attempts with
"Unsupported Feature or Parameter Value" (0x11).

Fix the issue by using the same quirk for BCM4378 devices too.

I tested this locally and confirmed that the issue is resolved.

This was observed when attempting to connect a Kinesis Advantage 360
keyboard to the MacBook.

Assisted-by: Claude:claude-fable-5
Fixes: 2e7ed5f5e69b ("Bluetooth: hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync")
Cc: stable@vger.kernel.org
Signed-off-by: Lorenzo Stoakes (ARM) <ljs@kernel.org>
Reviewed-by: Sven Peter <sven@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bluetooth: btusb: Add ASUS USB-BT600 for Realtek 8761CU 2026-09-07T15:18:08+00:00 Christoph Zwerschke cito@online.de 2026-07-05T09:28:57+00:00 32412aff8d11d00672053cb10750869f2de94a1f commit 6f0624b4427e38c3bb63a951c536cf8adaee1238 upstream. Add the vendor/product ID (0x0b05, 0x1d70) to the usb_device_id table for the Realtek RTL8761CU-based ASUS USB-BT600 adapter. It binds via the generic Bluetooth class today, so BTUSB_REALTEK is never set and the rtl8761cu firmware is not loaded, leaving the controller non-functional. With the entry the driver loads rtl_bt/rtl8761cu_fw.bin (already shipped by linux-firmware) and the adapter works (tested: A2DP and ASHA). Similar to commit bc597f0cc44f ("Bluetooth: btusb: Add TP-Link UB600 for Realtek 8761BUV"). Device info from /sys/kernel/debug/usb/devices: T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 23 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0b05 ProdID=1d70 Rev= 2.00 S: Manufacturer=Realtek S: Product=Bluetooth Controller C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms Cc: stable@vger.kernel.org Signed-off-by: Christoph Zwerschke <cito@online.de> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 6f0624b4427e38c3bb63a951c536cf8adaee1238 upstream.

Add the vendor/product ID (0x0b05, 0x1d70) to the usb_device_id table for
the Realtek RTL8761CU-based ASUS USB-BT600 adapter. It binds via the
generic Bluetooth class today, so BTUSB_REALTEK is never set and the
rtl8761cu firmware is not loaded, leaving the controller non-functional.
With the entry the driver loads rtl_bt/rtl8761cu_fw.bin (already shipped by
linux-firmware) and the adapter works (tested: A2DP and ASHA).

Similar to commit bc597f0cc44f
("Bluetooth: btusb: Add TP-Link UB600 for Realtek 8761BUV").

Device info from /sys/kernel/debug/usb/devices:

T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 23 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0b05 ProdID=1d70 Rev= 2.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Controller
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms

Cc: stable@vger.kernel.org
Signed-off-by: Christoph Zwerschke <cito@online.de>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bluetooth: btusb: Add ASUS USB-BT540 for Realtek 8761CU 2026-09-07T15:18:08+00:00 Christoph Zwerschke cito@online.de 2026-07-05T09:28:56+00:00 f05baf6e0680d8c10d2fbbc5953848fc3e3db957 commit 980084de4d9b25193398d89a1c0430ba3501b683 upstream. Add the vendor/product ID (0x0b05, 0x1bef) to the usb_device_id table for the Realtek RTL8761CU-based ASUS USB-BT540 adapter. It binds via the generic Bluetooth class today, so BTUSB_REALTEK is never set and the rtl8761cu firmware is not loaded, leaving the controller non-functional. With the entry the driver loads rtl_bt/rtl8761cu_fw.bin (already shipped by linux-firmware) and the adapter works (tested: A2DP and ASHA). Similar to commit bc597f0cc44f ("Bluetooth: btusb: Add TP-Link UB600 for Realtek 8761BUV"). Device info from /sys/kernel/debug/usb/devices: T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 22 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0b05 ProdID=1bef Rev= 2.00 S: Manufacturer=Realtek S: Product=Bluetooth Controller C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms Cc: stable@vger.kernel.org Signed-off-by: Christoph Zwerschke <cito@online.de> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 980084de4d9b25193398d89a1c0430ba3501b683 upstream.

Add the vendor/product ID (0x0b05, 0x1bef) to the usb_device_id table for
the Realtek RTL8761CU-based ASUS USB-BT540 adapter. It binds via the
generic Bluetooth class today, so BTUSB_REALTEK is never set and the
rtl8761cu firmware is not loaded, leaving the controller non-functional.
With the entry the driver loads rtl_bt/rtl8761cu_fw.bin (already shipped by
linux-firmware) and the adapter works (tested: A2DP and ASHA).

Similar to commit bc597f0cc44f
("Bluetooth: btusb: Add TP-Link UB600 for Realtek 8761BUV").

Device info from /sys/kernel/debug/usb/devices:

T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 22 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0b05 ProdID=1bef Rev= 2.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Controller
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms

Cc: stable@vger.kernel.org
Signed-off-by: Christoph Zwerschke <cito@online.de>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bluetooth: hci_aml: validate firmware segment lengths 2026-08-27T12:32:08+00:00 Laxman Acharya Padhya acharyalaxman8848@gmail.com 2026-07-30T12:20:28+00:00 7733b01ed13685773ccda91035a46f87d4cfef7c commit 2bf6b9baca9372ea51b6d0f2820dc9bf29a83ef4 upstream. aml_download_firmware() reads two lengths from the firmware header and uses them to build pointers before checking that the header and segment data are present. A truncated or inconsistent firmware image can make the driver read past firmware->data while constructing TCI commands. Reject images shorter than the header and ensure that the ICCM and DCCM ranges fit within the loaded firmware before downloading either segment. Fixes: 37bac77e4649 ("Bluetooth: hci_uart: Add support for Amlogic HCI UART") Cc: stable@vger.kernel.org Signed-off-by: Laxman Acharya Padhya <acharyalaxman8848@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 2bf6b9baca9372ea51b6d0f2820dc9bf29a83ef4 upstream.

aml_download_firmware() reads two lengths from the firmware header and
uses them to build pointers before checking that the header and segment
data are present. A truncated or inconsistent firmware image can make
the driver read past firmware->data while constructing TCI commands.

Reject images shorter than the header and ensure that the ICCM and DCCM
ranges fit within the loaded firmware before downloading either segment.

Fixes: 37bac77e4649 ("Bluetooth: hci_uart: Add support for Amlogic HCI UART")
Cc: stable@vger.kernel.org
Signed-off-by: Laxman Acharya Padhya <acharyalaxman8848@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bluetooth: btmtk: Fix short read errors in btmtk_usb_uhw_reg_read() 2026-08-09T18:23:12+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2026-07-27T15:57:32+00:00 2fbc807e66e3544ced153b8bd6f424a9b24b0a6e commit b186c18c4843dd58adc29443369bddc71cb626a3 upstream. If btmtk_usb_uhw_reg_read() gets a "short" read from a device, it will accidentally treat that as a "real" read and populate the returned value with some unknown and probably totally invalid data. Fix this logic error up by calling usb_control_msg_recv() which guarantees a "full" read happens, and then simplify the error checking for when btmtk_usb_uhw_reg_read() is called. Note, one caller of btmtk_usb_uhw_reg_read() does not check the return value, but as we pre-initialize the return value as 0, an incorrect read will not do anything wrong. Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b186c18c4843dd58adc29443369bddc71cb626a3 upstream.

If btmtk_usb_uhw_reg_read() gets a "short" read from a device, it will
accidentally treat that as a "real" read and populate the returned value
with some unknown and probably totally invalid data.

Fix this logic error up by calling usb_control_msg_recv() which
guarantees a "full" read happens, and then simplify the error checking
for when btmtk_usb_uhw_reg_read() is called.

Note, one caller of btmtk_usb_uhw_reg_read() does not check the return
value, but as we pre-initialize the return value as 0, an incorrect read
will not do anything wrong.

Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bluetooth: btusb: Fix short read errors in btusb_qca_send_vendor_req() 2026-08-09T18:23:11+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2026-07-27T15:57:34+00:00 57428a7095694b0212f8e41c6ff545ae46812432 commit cac43d360c928bc0cbbd18809632388265649761 upstream. If btusb_qca_send_vendor_req() gets a "short" read from a device, it will accidentally treat that as a "real" read and populate the returned value with some unknown and probably totally invalid data. Fix this logic error up by calling usb_control_msg_recv() which guarantees a "full" read happens, and then simplify the error checking for when btusb_qca_send_vendor_req() is called. Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit cac43d360c928bc0cbbd18809632388265649761 upstream.

If btusb_qca_send_vendor_req() gets a "short" read from a device, it
will accidentally treat that as a "real" read and populate the returned
value with some unknown and probably totally invalid data.

Fix this logic error up by calling usb_control_msg_recv() which
guarantees a "full" read happens, and then simplify the error checking
for when btusb_qca_send_vendor_req() is called.

Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>