BRI (Bluetooth Radio Interface) traffic from CNVr to CNVi was found causing
cross talk step errors to WiFi. To avoid this potential issue OEM platforms
can replace BRI resistor to adjust the BRI response line drive strength.
During the *setup*, driver reads the drive strength value from uefi
variable and passes it to the controller via vendor specific command with
opcode 0xfc0a.

dmesg:

..
[21.982720] Bluetooth: hci0: Bootloader timestamp 2023.33 buildtype 1 build 45995
[21.984250] Bluetooth: hci0: Found device firmware: intel/ibt-0190-0291-iml.sfi
[21.984255] Bluetooth: hci0: Boot Address: 0x30099000
[21.984256] Bluetooth: hci0: Firmware Version: 160-24.24
[22.011501] Bluetooth: hci0: Waiting for firmware download to complete
[22.011518] Bluetooth: hci0: Firmware loaded in 26624 usecs
[22.011584] Bluetooth: hci0: Waiting for device to boot
[22.013546] Bluetooth: hci0: Malformed MSFT vendor event: 0x02
[22.013552] Bluetooth: hci0: Device booted in 1967 usecs
...
[22.013792] Bluetooth: hci0: dsbr: enable: 0x01 value: 0x0b
...
[22.015027] Bluetooth: hci0: Found device firmware: intel/ibt-0190-0291.sfi
[22.015041] Bluetooth: hci0: Boot Address: 0x10000800
[22.015043] Bluetooth: hci0: Firmware Version: 160-24.24
[22.395821] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[22.395828] Bluetooth: BNEP filters: protocol multicast
...

Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

This inverts the LE State quirk so by default we assume the controllers
would report valid states rather than invalid which is how quirks
normally behave, also this would result in HCI command failing it the LE
States are really broken thus exposing the controllers that are really
broken in this respect.

Link: https://github.com/bluez/bluez/issues/584
Fixes: 220915857e29 ("Bluetooth: Adding driver and quirk defs for multi-role LE")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Do not attempt to send any hci command to controller if *setup* function
fails.

Fixes: af395330abed ("Bluetooth: btintel: Add Intel devcoredump support")
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Add support for BlazarU core (CNVi).

Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Use INTEL_HW_VARIANT() instead of CNVi Id to decide to load Intermediate
Loader (IML) image. Fix the driver loading incorrect firmware for
BlazarU product.

dmesg:
.....
[146.111834] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[146.111839] Bluetooth: hci0: Bootloader timestamp 2022.18 buildtype 1 build 16362
[146.111848] Bluetooth: hci0: No support for _PRR ACPI method
[146.112204] Bluetooth: hci0: Failed to load Intel firmware file intel/ibt-0291-0291-iml.sfi (-2)

Fixes: 164c62f958f8 ("Bluetooth: btintel: Add firmware ID to firmware name")
Reported-by: Tsigan, Vladislav <vladislav.tsigan@intel.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Fixes: f3b845e0aea3 ("Bluetooth: btintel: Add support to download intermediate loader")
Cc: Kiran K <kiran.k@intel.com>
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

From BlazarI onwards, driver shall append the firmware ID (usually
represents transport type) while constructing the firmware name.
Firmware ID is returned on Intel Read Version command.

The new firmware file name for operational image and ddc file shall be,
ibt-<cnvi_top type+cnvi_top step>-<cnvr_top type+cnvr_top step-fw_id>.[sfi|ddc]

dmesg snippet from BlazarI pcie  product:

......

[17.098858] Bluetooth: hci0: Found device firmware: intel/ibt-0190-0291-pci.sfi
[17.098871] Bluetooth: hci0: Boot Address: 0x10000800
[17.098872] Bluetooth: hci0: Firmware Version: 214-25.24
[17.158229] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[17.158236] Bluetooth: BNEP filters: protocol multicast
[17.158241] Bluetooth: BNEP socket layer initialized
[17.468789] Bluetooth: hci0: Waiting for firmware download to complete
[17.468793] Bluetooth: hci0: Firmware loaded in 361262 usecs
[17.468872] Bluetooth: hci0: Waiting for device to boot
[17.504148] Bluetooth: hci0: Device booted in 34512 usecs
[17.504148] Bluetooth: hci0: Malformed MSFT vendor event: 0x02
[17.504682] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0190-0291-pci.ddc
[17.505380] Bluetooth: hci0: Applying Intel DDC parameters completed
[17.505622] Bluetooth: hci0: Firmware timestamp 2024.25 buildtype 3 build 64726
[17.505624] Bluetooth: hci0: Firmware SHA1: 0x9f4adddc
[17.505838] Bluetooth: hci0: Fseq status: Success (0x00)
[17.505839] Bluetooth: hci0: Fseq executed: 00.00.04.183
[17.505840] Bluetooth: hci0: Fseq BT Top: 00.00.04.183

dmesg snippet from BlazarI usb product:

.......

[14.212072] Bluetooth: hci0: Found device firmware: intel/ibt-0190-0291-usb.sfi
[14.212091] Bluetooth: hci0: Boot Address: 0x10000800
[14.212093] Bluetooth: hci0: Firmware Version: 79-21.24
[14.262125] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[14.262129] Bluetooth: BNEP filters: protocol multicast
[14.262133] Bluetooth: BNEP socket layer initialized
[15.865421] Bluetooth: hci0: Waiting for firmware download to complete
[15.865991] Bluetooth: hci0: Firmware loaded in 1615150 usecs
[15.866017] Bluetooth: hci0: Waiting for device to boot
[15.899934] Bluetooth: hci0: Malformed MSFT vendor event: 0x02
[15.899942] Bluetooth: hci0: Device booted in 33139 usecs
[15.900172] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0190-0291-usb.ddc
[15.901928] Bluetooth: hci0: Applying Intel DDC parameters completed
[15.904993] Bluetooth: hci0: Firmware timestamp 2024.21 buildtype 3 build 63311
[15.904996] Bluetooth: hci0: Firmware SHA1: 0x8b217cf7
[15.908929] Bluetooth: hci0: Fseq status: Success (0x00)
[15.908934] Bluetooth: hci0: Fseq executed: 00.00.04.180
[15.908935] Bluetooth: hci0: Fseq BT Top: 00.00.04.180

Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

When HCI raw sockets are opened, the Bluetooth kernel module doesn't
track CIS/BIS connections. User-space applications have to identify
ISO data by maintaining connection information and look up the mapping
for each ACL data packet received. Besides, btsnoop log captured in
kernel couldn't tell ISO data from ACL data in this case.

To avoid additional lookups, this patch introduces vendor-specific
packet classification for Intel BT controllers to distinguish
ISO data packets from ACL data packets.

Signed-off-by: Ying Hsu <yinghsu@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Firmware sequencer (FSEQ) is a common code shared across Bluetooth
and Wifi. Printing FSEQ will help to debug if there is any mismatch
between Bluetooth and Wifi FSEQ.

Make 'btintel_print_fseq_info' public and use it in btintel_pcie.c.

dmesg:

....

[ 5335.695740] Bluetooth: hci0: Device booted in 33872 usecs
[ 5335.695918] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0190-0291.ddc
[ 5335.697011] Bluetooth: hci0: Applying Intel DDC parameters completed
[ 5335.697837] Bluetooth: hci0: Firmware timestamp 2024.20 buildtype 0 build 62871
[ 5335.697848] Bluetooth: hci0: Firmware SHA1: 0xeffdce06
[ 5335.698655] Bluetooth: hci0: Fseq status: Success (0x00)
[ 5335.698666] Bluetooth: hci0: Fseq executed: 00.00.04.176
[ 5335.698670] Bluetooth: hci0: Fseq BT Top: 00.00.04.176
[ 5335.750204] Bluetooth: MGMT ver 1.22

Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Current flow iterates the ACPI table associated with Bluetooth
controller looking for PPAG method. Method name can be directly passed
to acpi_evaluate_object function instead of iterating the table.

Fixes: c585a92b2f9c ("Bluetooth: btintel: Set Per Platform Antenna Gain(PPAG)")
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>