linux-stable.git/drivers/block, branch v6.6.92 Linux kernel stable tree loop: aio inherit the ioprio of original request 2025-05-02T05:51:01+00:00 Yunlong Xing yunlong.xing@unisoc.com 2025-04-14T03:01:59+00:00 6c2e136ffd056e460528518c902e0f3424b694cc [ Upstream commit 1fdb8188c3d505452b40cdb365b1bb32be533a8e ] Set cmd->iocb.ki_ioprio to the ioprio of loop device's request. The purpose is to inherit the original request ioprio in the aio flow. Signed-off-by: Yunlong Xing <yunlong.xing@unisoc.com> Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20250414030159.501180-1-yunlong.xing@unisoc.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 1fdb8188c3d505452b40cdb365b1bb32be533a8e ]

Set cmd->iocb.ki_ioprio to the ioprio of loop device's request.
The purpose is to inherit the original request ioprio in the aio
flow.

Signed-off-by: Yunlong Xing <yunlong.xing@unisoc.com>
Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250414030159.501180-1-yunlong.xing@unisoc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
loop: LOOP_SET_FD: send uevents for partitions 2025-04-25T08:45:48+00:00 Thomas Weißschuh thomas.weissschuh@linutronix.de 2025-04-15T14:55:06+00:00 2912683a104e9b4902b5c0015a27bad39361fe56 commit 0dba7a05b9e47d8b546399117b0ddf2426dc6042 upstream. Remove the suppression of the uevents before scanning for partitions. The partitions inherit their suppression settings from their parent device, which lead to the uevents being dropped. This is similar to the same changes for LOOP_CONFIGURE done in commit bb430b694226 ("loop: LOOP_CONFIGURE: send uevents for partitions"). Fixes: 498ef5c777d9 ("loop: suppress uevents while reconfiguring the device") Cc: stable@vger.kernel.org Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20250415-loop-uevent-changed-v3-1-60ff69ac6088@linutronix.de Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 0dba7a05b9e47d8b546399117b0ddf2426dc6042 upstream.

Remove the suppression of the uevents before scanning for partitions.
The partitions inherit their suppression settings from their parent device,
which lead to the uevents being dropped.

This is similar to the same changes for LOOP_CONFIGURE done in
commit bb430b694226 ("loop: LOOP_CONFIGURE: send uevents for partitions").

Fixes: 498ef5c777d9 ("loop: suppress uevents while reconfiguring the device")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20250415-loop-uevent-changed-v3-1-60ff69ac6088@linutronix.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
loop: properly send KOBJ_CHANGED uevent for disk device 2025-04-25T08:45:48+00:00 Thomas Weißschuh thomas.weissschuh@linutronix.de 2025-04-15T08:51:47+00:00 f8530400f21c649298b71044b5222703dded898e commit e7bc0010ceb403d025100698586c8e760921d471 upstream. The original commit message and the wording "uncork" in the code comment indicate that it is expected that the suppressed event instances are automatically sent after unsuppressing. This is not the case, instead they are discarded. In effect this means that no "changed" events are emitted on the device itself by default. While each discovered partition does trigger a changed event on the device, devices without partitions don't have any event emitted. This makes udev miss the device creation and prompted workarounds in userspace. See the linked util-linux/losetup bug. Explicitly emit the events and drop the confusingly worded comments. Link: https://github.com/util-linux/util-linux/issues/2434 Fixes: 498ef5c777d9 ("loop: suppress uevents while reconfiguring the device") Cc: stable@vger.kernel.org Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Link: https://lore.kernel.org/r/20250415-loop-uevent-changed-v2-1-0c4e6a923b2a@linutronix.de Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e7bc0010ceb403d025100698586c8e760921d471 upstream.

The original commit message and the wording "uncork" in the code comment
indicate that it is expected that the suppressed event instances are
automatically sent after unsuppressing.
This is not the case, instead they are discarded.
In effect this means that no "changed" events are emitted on the device
itself by default.
While each discovered partition does trigger a changed event on the
device, devices without partitions don't have any event emitted.

This makes udev miss the device creation and prompted workarounds in
userspace. See the linked util-linux/losetup bug.

Explicitly emit the events and drop the confusingly worded comments.

Link: https://github.com/util-linux/util-linux/issues/2434
Fixes: 498ef5c777d9 ("loop: suppress uevents while reconfiguring the device")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://lore.kernel.org/r/20250415-loop-uevent-changed-v2-1-0c4e6a923b2a@linutronix.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
zram: fix NULL pointer in comp_algorithm_show() 2025-03-22T19:50:37+00:00 Liu Shixin liushixin2@huawei.com 2024-11-08T10:01:47+00:00 c7ee791e538537b281f60945298796f0a3971bbd commit f364cdeb38938f9d03061682b8ff3779dd1730e5 upstream. LTP reported a NULL pointer dereference as followed: CPU: 7 UID: 0 PID: 5995 Comm: cat Kdump: loaded Not tainted 6.12.0-rc6+ #3 Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 pstate: 40400005 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __pi_strcmp+0x24/0x140 lr : zcomp_available_show+0x60/0x100 [zram] sp : ffff800088b93b90 x29: ffff800088b93b90 x28: 0000000000000001 x27: 0000000000400cc0 x26: 0000000000000ffe x25: ffff80007b3e2388 x24: 0000000000000000 x23: ffff80007b3e2390 x22: ffff0004041a9000 x21: ffff80007b3e2900 x20: 0000000000000000 x19: 0000000000000000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: ffff80007b3e2900 x9 : ffff80007b3cb280 x8 : 0101010101010101 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000000040 x4 : 0000000000000000 x3 : 00656c722d6f7a6c x2 : 0000000000000000 x1 : ffff80007b3e2900 x0 : 0000000000000000 Call trace: __pi_strcmp+0x24/0x140 comp_algorithm_show+0x40/0x70 [zram] dev_attr_show+0x28/0x80 sysfs_kf_seq_show+0x90/0x140 kernfs_seq_show+0x34/0x48 seq_read_iter+0x1d4/0x4e8 kernfs_fop_read_iter+0x40/0x58 new_sync_read+0x9c/0x168 vfs_read+0x1a8/0x1f8 ksys_read+0x74/0x108 __arm64_sys_read+0x24/0x38 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0xc8/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x38/0x138 el0t_64_sync_handler+0xc0/0xc8 el0t_64_sync+0x188/0x190 The zram->comp_algs[ZRAM_PRIMARY_COMP] can be NULL in zram_add() if comp_algorithm_set() has not been called. User can access the zram device by sysfs after device_add_disk(), so there is a time window to trigger the NULL pointer dereference. Move it ahead device_add_disk() to make sure when user can access the zram device, it is ready. comp_algorithm_set() is protected by zram->init_lock in other places and no such problem. Link: https://lkml.kernel.org/r/20241108100147.3776123-1-liushixin2@huawei.com Fixes: 7ac07a26dea7 ("zram: preparation for multi-zcomp support") Signed-off-by: Liu Shixin <liushixin2@huawei.com> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> [This fix does not backport zram_comp_params_reset which was introduced after v6.6, in commit f2bac7ad187d ("zram: introduce zcomp_params structure")] Signed-off-by: Jianqi Ren <jianqi.ren.cn@windriver.com> Signed-off-by: He Zhe <zhe.he@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f364cdeb38938f9d03061682b8ff3779dd1730e5 upstream.

LTP reported a NULL pointer dereference as followed:

 CPU: 7 UID: 0 PID: 5995 Comm: cat Kdump: loaded Not tainted 6.12.0-rc6+ #3
 Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
 pstate: 40400005 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
 pc : __pi_strcmp+0x24/0x140
 lr : zcomp_available_show+0x60/0x100 [zram]
 sp : ffff800088b93b90
 x29: ffff800088b93b90 x28: 0000000000000001 x27: 0000000000400cc0
 x26: 0000000000000ffe x25: ffff80007b3e2388 x24: 0000000000000000
 x23: ffff80007b3e2390 x22: ffff0004041a9000 x21: ffff80007b3e2900
 x20: 0000000000000000 x19: 0000000000000000 x18: 0000000000000000
 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
 x11: 0000000000000000 x10: ffff80007b3e2900 x9 : ffff80007b3cb280
 x8 : 0101010101010101 x7 : 0000000000000000 x6 : 0000000000000000
 x5 : 0000000000000040 x4 : 0000000000000000 x3 : 00656c722d6f7a6c
 x2 : 0000000000000000 x1 : ffff80007b3e2900 x0 : 0000000000000000
 Call trace:
  __pi_strcmp+0x24/0x140
  comp_algorithm_show+0x40/0x70 [zram]
  dev_attr_show+0x28/0x80
  sysfs_kf_seq_show+0x90/0x140
  kernfs_seq_show+0x34/0x48
  seq_read_iter+0x1d4/0x4e8
  kernfs_fop_read_iter+0x40/0x58
  new_sync_read+0x9c/0x168
  vfs_read+0x1a8/0x1f8
  ksys_read+0x74/0x108
  __arm64_sys_read+0x24/0x38
  invoke_syscall+0x50/0x120
  el0_svc_common.constprop.0+0xc8/0xf0
  do_el0_svc+0x24/0x38
  el0_svc+0x38/0x138
  el0t_64_sync_handler+0xc0/0xc8
  el0t_64_sync+0x188/0x190

The zram->comp_algs[ZRAM_PRIMARY_COMP] can be NULL in zram_add() if
comp_algorithm_set() has not been called.  User can access the zram device
by sysfs after device_add_disk(), so there is a time window to trigger the
NULL pointer dereference.  Move it ahead device_add_disk() to make sure
when user can access the zram device, it is ready.  comp_algorithm_set()
is protected by zram->init_lock in other places and no such problem.

Link: https://lkml.kernel.org/r/20241108100147.3776123-1-liushixin2@huawei.com
Fixes: 7ac07a26dea7 ("zram: preparation for multi-zcomp support")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[This fix does not backport zram_comp_params_reset which was introduced after
 v6.6, in commit f2bac7ad187d ("zram: introduce zcomp_params structure")]
Signed-off-by: Jianqi Ren <jianqi.ren.cn@windriver.com>
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ublk: set_params: properly check if parameters can be applied 2025-03-13T11:58:32+00:00 Uday Shankar ushankar@purestorage.com 2025-03-04T21:34:26+00:00 c6292a2ac3925a3e99a1b89cb2bde847ed2f6891 [ Upstream commit 5ac60242b0173be83709603ebaf27a473f16c4e4 ] The parameters set by the set_params call are only applied to the block device in the start_dev call. So if a device has already been started, a subsequently issued set_params on that device will not have the desired effect, and should return an error. There is an existing check for this - set_params fails on devices in the LIVE state. But this check is not sufficient to cover the recovery case. In this case, the device will be in the QUIESCED or FAIL_IO states, so set_params will succeed. But this success is misleading, because the parameters will not be applied, since the device has already been started (by a previous ublk server). The bit UB_STATE_USED is set on completion of the start_dev; use it to detect and fail set_params commands which arrive too late to be applied (after start_dev). Signed-off-by: Uday Shankar <ushankar@purestorage.com> Fixes: 0aa73170eba5 ("ublk_drv: add SET_PARAMS/GET_PARAMS control command") Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250304-set_params-v1-1-17b5e0887606@purestorage.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 5ac60242b0173be83709603ebaf27a473f16c4e4 ]

The parameters set by the set_params call are only applied to the block
device in the start_dev call. So if a device has already been started, a
subsequently issued set_params on that device will not have the desired
effect, and should return an error. There is an existing check for this
- set_params fails on devices in the LIVE state. But this check is not
sufficient to cover the recovery case. In this case, the device will be
in the QUIESCED or FAIL_IO states, so set_params will succeed. But this
success is misleading, because the parameters will not be applied, since
the device has already been started (by a previous ublk server). The bit
UB_STATE_USED is set on completion of the start_dev; use it to detect
and fail set_params commands which arrive too late to be applied (after
start_dev).

Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Fixes: 0aa73170eba5 ("ublk_drv: add SET_PARAMS/GET_PARAMS control command")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250304-set_params-v1-1-17b5e0887606@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
nbd: don't allow reconnect after disconnect 2025-02-08T08:51:42+00:00 Yu Kuai yukuai3@huawei.com 2025-01-03T09:28:59+00:00 d208d2c52b652913b5eefc8ca434b0d6b757f68f [ Upstream commit 844b8cdc681612ff24df62cdefddeab5772fadf1 ] Following process can cause nbd_config UAF: 1) grab nbd_config temporarily; 2) nbd_genl_disconnect() flush all recv_work() and release the initial reference: nbd_genl_disconnect nbd_disconnect_and_put nbd_disconnect flush_workqueue(nbd->recv_workq) if (test_and_clear_bit(NBD_RT_HAS_CONFIG_REF, ...)) nbd_config_put -> due to step 1), reference is still not zero 3) nbd_genl_reconfigure() queue recv_work() again; nbd_genl_reconfigure config = nbd_get_config_unlocked(nbd) if (!config) -> succeed if (!test_bit(NBD_RT_BOUND, ...)) -> succeed nbd_reconnect_socket queue_work(nbd->recv_workq, &args->work) 4) step 1) release the reference; 5) Finially, recv_work() will trigger UAF: recv_work nbd_config_put(nbd) -> nbd_config is freed atomic_dec(&config->recv_threads) -> UAF Fix the problem by clearing NBD_RT_BOUND in nbd_genl_disconnect(), so that nbd_genl_reconfigure() will fail. Fixes: b7aa3d39385d ("nbd: add a reconfigure netlink command") Reported-by: syzbot+6b0df248918b92c33e6a@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/675bfb65.050a0220.1a2d0d.0006.GAE@google.com/ Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20250103092859.3574648-1-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 844b8cdc681612ff24df62cdefddeab5772fadf1 ]

Following process can cause nbd_config UAF:

1) grab nbd_config temporarily;

2) nbd_genl_disconnect() flush all recv_work() and release the
initial reference:

  nbd_genl_disconnect
   nbd_disconnect_and_put
    nbd_disconnect
     flush_workqueue(nbd->recv_workq)
    if (test_and_clear_bit(NBD_RT_HAS_CONFIG_REF, ...))
     nbd_config_put
     -> due to step 1), reference is still not zero

3) nbd_genl_reconfigure() queue recv_work() again;

  nbd_genl_reconfigure
   config = nbd_get_config_unlocked(nbd)
   if (!config)
   -> succeed
   if (!test_bit(NBD_RT_BOUND, ...))
   -> succeed
   nbd_reconnect_socket
    queue_work(nbd->recv_workq, &args->work)

4) step 1) release the reference;

5) Finially, recv_work() will trigger UAF:

  recv_work
   nbd_config_put(nbd)
   -> nbd_config is freed
   atomic_dec(&config->recv_threads)
   -> UAF

Fix the problem by clearing NBD_RT_BOUND in nbd_genl_disconnect(), so
that nbd_genl_reconfigure() will fail.

Fixes: b7aa3d39385d ("nbd: add a reconfigure netlink command")
Reported-by: syzbot+6b0df248918b92c33e6a@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/675bfb65.050a0220.1a2d0d.0006.GAE@google.com/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250103092859.3574648-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
zram: fix potential UAF of zram table 2025-01-23T16:21:15+00:00 Kairui Song kasong@tencent.com 2025-01-07T06:54:46+00:00 571d3f6045cd3a6d9f6aec33b678f3ffe97582ef commit 212fe1c0df4a150fb6298db2cfff267ceaba5402 upstream. If zram_meta_alloc failed early, it frees allocated zram->table without setting it NULL. Which will potentially cause zram_meta_free to access the table if user reset an failed and uninitialized device. Link: https://lkml.kernel.org/r/20250107065446.86928-1-ryncsn@gmail.com Fixes: 74363ec674cb ("zram: fix uninitialized ZRAM not releasing backing device") Signed-off-by: Kairui Song <kasong@tencent.com> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 212fe1c0df4a150fb6298db2cfff267ceaba5402 upstream.

If zram_meta_alloc failed early, it frees allocated zram->table without
setting it NULL.  Which will potentially cause zram_meta_free to access
the table if user reset an failed and uninitialized device.

Link: https://lkml.kernel.org/r/20250107065446.86928-1-ryncsn@gmail.com
Fixes: 74363ec674cb ("zram: fix uninitialized ZRAM not releasing backing device")
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by:  Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
virtio-blk: don't keep queue frozen during system suspend 2025-01-02T09:32:06+00:00 Ming Lei ming.lei@redhat.com 2024-11-12T12:58:21+00:00 12c0ddd6c551c1e438b087f874b4f1223a75f7ea [ Upstream commit 7678abee0867e6b7fb89aa40f6e9f575f755fb37 ] Commit 4ce6e2db00de ("virtio-blk: Ensure no requests in virtqueues before deleting vqs.") replaces queue quiesce with queue freeze in virtio-blk's PM callbacks. And the motivation is to drain inflight IOs before suspending. block layer's queue freeze looks very handy, but it is also easy to cause deadlock, such as, any attempt to call into bio_queue_enter() may run into deadlock if the queue is frozen in current context. There are all kinds of ->suspend() called in suspend context, so keeping queue frozen in the whole suspend context isn't one good idea. And Marek reported lockdep warning[1] caused by virtio-blk's freeze queue in virtblk_freeze(). [1] https://lore.kernel.org/linux-block/ca16370e-d646-4eee-b9cc-87277c89c43c@samsung.com/ Given the motivation is to drain in-flight IOs, it can be done by calling freeze & unfreeze, meantime restore to previous behavior by keeping queue quiesced during suspend. Cc: Yi Sun <yi.sun@unisoc.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: virtualization@lists.linux.dev Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Link: https://lore.kernel.org/r/20241112125821.1475793-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 7678abee0867e6b7fb89aa40f6e9f575f755fb37 ]

Commit 4ce6e2db00de ("virtio-blk: Ensure no requests in virtqueues before
deleting vqs.") replaces queue quiesce with queue freeze in virtio-blk's
PM callbacks. And the motivation is to drain inflight IOs before suspending.

block layer's queue freeze looks very handy, but it is also easy to cause
deadlock, such as, any attempt to call into bio_queue_enter() may run into
deadlock if the queue is frozen in current context. There are all kinds
of ->suspend() called in suspend context, so keeping queue frozen in the
whole suspend context isn't one good idea. And Marek reported lockdep
warning[1] caused by virtio-blk's freeze queue in virtblk_freeze().

[1] https://lore.kernel.org/linux-block/ca16370e-d646-4eee-b9cc-87277c89c43c@samsung.com/

Given the motivation is to drain in-flight IOs, it can be done by calling
freeze & unfreeze, meantime restore to previous behavior by keeping queue
quiesced during suspend.

Cc: Yi Sun <yi.sun@unisoc.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: virtualization@lists.linux.dev
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20241112125821.1475793-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
zram: fix uninitialized ZRAM not releasing backing device 2024-12-27T12:58:53+00:00 Kairui Song kasong@tencent.com 2024-12-09T16:57:16+00:00 0b5b0b65561b34e6e360de317e4bcd031bfabf42 commit 74363ec674cb172d8856de25776c8f3103f05e2f upstream. Setting backing device is done before ZRAM initialization. If we set the backing device, then remove the ZRAM module without initializing the device, the backing device reference will be leaked and the device will be hold forever. Fix this by always reset the ZRAM fully on rmmod or reset store. Link: https://lkml.kernel.org/r/20241209165717.94215-3-ryncsn@gmail.com Fixes: 013bf95a83ec ("zram: add interface to specif backing device") Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Desheng Wu <deshengwu@tencent.com> Suggested-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 74363ec674cb172d8856de25776c8f3103f05e2f upstream.

Setting backing device is done before ZRAM initialization.  If we set the
backing device, then remove the ZRAM module without initializing the
device, the backing device reference will be leaked and the device will be
hold forever.

Fix this by always reset the ZRAM fully on rmmod or reset store.

Link: https://lkml.kernel.org/r/20241209165717.94215-3-ryncsn@gmail.com
Fixes: 013bf95a83ec ("zram: add interface to specif backing device")
Signed-off-by: Kairui Song <kasong@tencent.com>
Reported-by: Desheng Wu <deshengwu@tencent.com>
Suggested-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
zram: refuse to use zero sized block device as backing device 2024-12-27T12:58:53+00:00 Kairui Song kasong@tencent.com 2024-12-09T16:57:15+00:00 aca0f94c25dedb50bb7769de0fd3c4ed2c6653e9 commit be48c412f6ebf38849213c19547bc6d5b692b5e5 upstream. Patch series "zram: fix backing device setup issue", v2. This series fixes two bugs of backing device setting: - ZRAM should reject using a zero sized (or the uninitialized ZRAM device itself) as the backing device. - Fix backing device leaking when removing a uninitialized ZRAM device. This patch (of 2): Setting a zero sized block device as backing device is pointless, and one can easily create a recursive loop by setting the uninitialized ZRAM device itself as its own backing device by (zram0 is uninitialized): echo /dev/zram0 > /sys/block/zram0/backing_dev It's definitely a wrong config, and the module will pin itself, kernel should refuse doing so in the first place. By refusing to use zero sized device we avoided misuse cases including this one above. Link: https://lkml.kernel.org/r/20241209165717.94215-1-ryncsn@gmail.com Link: https://lkml.kernel.org/r/20241209165717.94215-2-ryncsn@gmail.com Fixes: 013bf95a83ec ("zram: add interface to specif backing device") Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Desheng Wu <deshengwu@tencent.com> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit be48c412f6ebf38849213c19547bc6d5b692b5e5 upstream.

Patch series "zram: fix backing device setup issue", v2.

This series fixes two bugs of backing device setting:

- ZRAM should reject using a zero sized (or the uninitialized ZRAM
  device itself) as the backing device.
- Fix backing device leaking when removing a uninitialized ZRAM
  device.


This patch (of 2):

Setting a zero sized block device as backing device is pointless, and one
can easily create a recursive loop by setting the uninitialized ZRAM
device itself as its own backing device by (zram0 is uninitialized):

    echo /dev/zram0 > /sys/block/zram0/backing_dev

It's definitely a wrong config, and the module will pin itself, kernel
should refuse doing so in the first place.

By refusing to use zero sized device we avoided misuse cases including
this one above.

Link: https://lkml.kernel.org/r/20241209165717.94215-1-ryncsn@gmail.com
Link: https://lkml.kernel.org/r/20241209165717.94215-2-ryncsn@gmail.com
Fixes: 013bf95a83ec ("zram: add interface to specif backing device")
Signed-off-by: Kairui Song <kasong@tencent.com>
Reported-by: Desheng Wu <deshengwu@tencent.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>