linux-stable.git/drivers/block, branch v5.2.7

nbd: replace kill_bdev() with __invalidate_device() again

2019-08-06T17:08:20+00:00

commit 2b5c8f0063e4b263cf2de82029798183cf85c320 upstream.

Commit abbbdf12497d ("replace kill_bdev() with __invalidate_device()")
once did this, but 29eaadc03649 ("nbd: stop using the bdev everywhere")
resurrected kill_bdev() and it has been there since then. So buffer_head
mappings still get killed on a server disconnection, and we can still
hit the BUG_ON on a filesystem on the top of the nbd device.

  EXT4-fs (nbd0): mounted filesystem with ordered data mode. Opts: (null)
  block nbd0: Receive control failed (result -32)
  block nbd0: shutting down sockets
  print_req_error: I/O error, dev nbd0, sector 66264 flags 3000
  EXT4-fs warning (device nbd0): htree_dirblock_to_tree:979: inode #2: lblock 0: comm ls: error -5 reading directory block
  print_req_error: I/O error, dev nbd0, sector 2264 flags 3000
  EXT4-fs error (device nbd0): __ext4_get_inode_loc:4690: inode #2: block 283: comm ls: unable to read itable block
  EXT4-fs error (device nbd0) in ext4_reserve_inode_write:5894: IO failure
  ------------[ cut here ]------------
  kernel BUG at fs/buffer.c:3057!
  invalid opcode: 0000 [#1] SMP PTI
  CPU: 7 PID: 40045 Comm: jbd2/nbd0-8 Not tainted 5.1.0-rc3+ #4
  Hardware name: Amazon EC2 m5.12xlarge/, BIOS 1.0 10/16/2017
  RIP: 0010:submit_bh_wbc+0x18b/0x190
  ...
  Call Trace:
   jbd2_write_superblock+0xf1/0x230 [jbd2]
   ? account_entity_enqueue+0xc5/0xf0
   jbd2_journal_update_sb_log_tail+0x94/0xe0 [jbd2]
   jbd2_journal_commit_transaction+0x12f/0x1d20 [jbd2]
   ? __switch_to_asm+0x40/0x70
   ...
   ? lock_timer_base+0x67/0x80
   kjournald2+0x121/0x360 [jbd2]
   ? remove_wait_queue+0x60/0x60
   kthread+0xf8/0x130
   ? commit_timeout+0x10/0x10 [jbd2]
   ? kthread_bind+0x10/0x10
   ret_from_fork+0x35/0x40

With __invalidate_device(), I no longer hit the BUG_ON with sync or
unmount on the disconnected device.

Fixes: 29eaadc03649 ("nbd: stop using the bdev everywhere")
Cc: linux-block@vger.kernel.org
Cc: Ratna Manoj Bolla 
Cc: nbd@other.debian.org
Cc: stable@vger.kernel.org
Cc: David Woodhouse 
Reviewed-by: Josef Bacik 
Signed-off-by: Munehisa Kamata 
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

loop: Fix mount(2) failure due to race with LOOP_SET_FD

2019-08-06T17:08:18+00:00

commit 89e524c04fa966330e2e80ab2bc50b9944c5847a upstream.

Commit 33ec3e53e7b1 ("loop: Don't change loop device under exclusive
opener") made LOOP_SET_FD ioctl acquire exclusive block device reference
while it updates loop device binding. However this can make perfectly
valid mount(2) fail with EBUSY due to racing LOOP_SET_FD holding
temporarily the exclusive bdev reference in cases like this:

for i in {a..z}{a..z}; do
        dd if=/dev/zero of=$i.image bs=1k count=0 seek=1024
        mkfs.ext2 $i.image
        mkdir mnt$i
done

echo "Run"
for i in {a..z}{a..z}; do
        mount -o loop -t ext2 $i.image mnt$i &
done

Fix the problem by not getting full exclusive bdev reference in
LOOP_SET_FD but instead just mark the bdev as being claimed while we
update the binding information. This just blocks new exclusive openers
instead of failing them with EBUSY thus fixing the problem.

Fixes: 33ec3e53e7b1 ("loop: Don't change loop device under exclusive opener")
Cc: stable@vger.kernel.org
Tested-by: Kai-Heng Feng 
Signed-off-by: Jan Kara 
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

floppy: fix out-of-bounds read in copy_buffer

2019-07-26T07:10:48+00:00

[ Upstream commit da99466ac243f15fbba65bd261bfc75ffa1532b6 ]

This fixes a global out-of-bounds read access in the copy_buffer
function of the floppy driver.

The FDDEFPRM ioctl allows one to set the geometry of a disk.  The sect
and head fields (unsigned int) of the floppy_drive structure are used to
compute the max_sector (int) in the make_raw_rw_request function.  It is
possible to overflow the max_sector.  Next, max_sector is passed to the
copy_buffer function and used in one of the memcpy calls.

An unprivileged user could trigger the bug if the device is accessible,
but requires a floppy disk to be inserted.

The patch adds the check for the .sect * .head multiplication for not
overflowing in the set_geometry function.

The bug was found by syzkaller.

Signed-off-by: Denis Efremov 
Tested-by: Willy Tarreau 
Signed-off-by: Linus Torvalds 
Signed-off-by: Sasha Levin

floppy: fix invalid pointer dereference in drive_name

2019-07-26T07:10:47+00:00

[ Upstream commit 9b04609b784027968348796a18f601aed9db3789 ]

This fixes the invalid pointer dereference in the drive_name function of
the floppy driver.

The native_format field of the struct floppy_drive_params is used as
floppy_type array index in the drive_name function.  Thus, the field
should be checked the same way as the autodetect field.

To trigger the bug, one could use a value out of range and set the drive
parameters with the FDSETDRVPRM ioctl.  Next, FDGETDRVTYP ioctl should
be used to call the drive_name.  A floppy disk is not required to be
inserted.

CAP_SYS_ADMIN is required to call FDSETDRVPRM.

The patch adds the check for a value of the native_format field to be in
the '0 <= x < ARRAY_SIZE(floppy_type)' range of the floppy_type array
indices.

The bug was found by syzkaller.

Signed-off-by: Denis Efremov 
Tested-by: Willy Tarreau 
Signed-off-by: Linus Torvalds 
Signed-off-by: Sasha Levin

floppy: fix out-of-bounds read in next_valid_format

2019-07-26T07:10:47+00:00

[ Upstream commit 5635f897ed83fd539df78e98ba69ee91592f9bb8 ]

This fixes a global out-of-bounds read access in the next_valid_format
function of the floppy driver.

The values from autodetect field of the struct floppy_drive_params are
used as indices for the floppy_type array in the next_valid_format
function 'floppy_type[DP->autodetect[probed_format]].sect'.

To trigger the bug, one could use a value out of range and set the drive
parameters with the FDSETDRVPRM ioctl.  A floppy disk is not required to
be inserted.

CAP_SYS_ADMIN is required to call FDSETDRVPRM.

The patch adds the check for values of the autodetect field to be in the
'0 <= x < ARRAY_SIZE(floppy_type)' range of the floppy_type array indices.

The bug was found by syzkaller.

Signed-off-by: Denis Efremov 
Tested-by: Willy Tarreau 
Signed-off-by: Linus Torvalds 
Signed-off-by: Sasha Levin

floppy: fix div-by-zero in setup_format_params

2019-07-26T07:10:47+00:00

[ Upstream commit f3554aeb991214cbfafd17d55e2bfddb50282e32 ]

This fixes a divide by zero error in the setup_format_params function of
the floppy driver.

Two consecutive ioctls can trigger the bug: The first one should set the
drive geometry with such .sect and .rate values for the F_SECT_PER_TRACK
to become zero.  Next, the floppy format operation should be called.

A floppy disk is not required to be inserted.  An unprivileged user
could trigger the bug if the device is accessible.

The patch checks F_SECT_PER_TRACK for a non-zero value in the
set_geometry function.  The proper check should involve a reasonable
upper limit for the .sect and .rate fields, but it could change the
UAPI.

The patch also checks F_SECT_PER_TRACK in the setup_format_params, and
cancels the formatting operation in case of zero.

The bug was found by syzkaller.

Signed-off-by: Denis Efremov 
Tested-by: Willy Tarreau 
Signed-off-by: Linus Torvalds 
Signed-off-by: Sasha Levin

block: null_blk: fix race condition for null_del_dev

2019-07-26T07:10:27+00:00

[ Upstream commit 7602843fd873cae43a444b83b14dfdd114a9659c ]

Dulicate call of null_del_dev() will trigger null pointer error like below.
The reason is a race condition between nullb_device_power_store() and
nullb_group_drop_item().

  CPU#0                         CPU#1
  ----------------              -----------------
  do_rmdir()
   >configfs_rmdir()
    >client_drop_item()
     >nullb_group_drop_item()
                                nullb_device_power_store()
				>null_del_dev()

      >test_and_clear_bit(NULLB_DEV_FL_UP
       >null_del_dev()
       ^^^^^
       Duplicated null_dev_dev() triger null pointer error

				>clear_bit(NULLB_DEV_FL_UP

The fix could be keep the sequnce of clear NULLB_DEV_FL_UP and null_del_dev().

[  698.613600] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
[  698.613608] #PF error: [normal kernel read fault]
[  698.613611] PGD 0 P4D 0
[  698.613619] Oops: 0000 [#1] SMP PTI
[  698.613627] CPU: 3 PID: 6382 Comm: rmdir Not tainted 5.0.0+ #35
[  698.613631] Hardware name: LENOVO 20LJS2EV08/20LJS2EV08, BIOS R0SET33W (1.17 ) 07/18/2018
[  698.613644] RIP: 0010:null_del_dev+0xc/0x110 [null_blk]
[  698.613649] Code: 00 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 0b eb 97 e8 47 bb 2a e8 0f 1f 80 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 54 53 <8b> 77 18 48 89 fb 4c 8b 27 48 c7 c7 40 57 1e c1 e8 bf c7 cb e8 48
[  698.613654] RSP: 0018:ffffb887888bfde0 EFLAGS: 00010286
[  698.613659] RAX: 0000000000000000 RBX: ffff9d436d92bc00 RCX: ffff9d43a9184681
[  698.613663] RDX: ffffffffc11e5c30 RSI: 0000000068be6540 RDI: 0000000000000000
[  698.613667] RBP: ffffb887888bfdf0 R08: 0000000000000001 R09: 0000000000000000
[  698.613671] R10: ffffb887888bfdd8 R11: 0000000000000f16 R12: ffff9d436d92bc08
[  698.613675] R13: ffff9d436d94e630 R14: ffffffffc11e5088 R15: ffffffffc11e5000
[  698.613680] FS:  00007faa68be6540(0000) GS:ffff9d43d14c0000(0000) knlGS:0000000000000000
[  698.613685] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  698.613689] CR2: 0000000000000018 CR3: 000000042f70c002 CR4: 00000000003606e0
[  698.613693] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  698.613697] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  698.613700] Call Trace:
[  698.613712]  nullb_group_drop_item+0x50/0x70 [null_blk]
[  698.613722]  client_drop_item+0x29/0x40
[  698.613728]  configfs_rmdir+0x1ed/0x300
[  698.613738]  vfs_rmdir+0xb2/0x130
[  698.613743]  do_rmdir+0x1c7/0x1e0
[  698.613750]  __x64_sys_rmdir+0x17/0x20
[  698.613759]  do_syscall_64+0x5a/0x110
[  698.613768]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Signed-off-by: Bob Liu 
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

2019-06-19T15:09:55+00:00

Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Enrico Weigelt 
Reviewed-by: Kate Stewart 
Reviewed-by: Allison Randal 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 497

2019-06-19T15:09:53+00:00

Based on 1 normalized pattern(s):

  this file is part of the linux kernel and is made available under
  the terms of the gnu general public license version 2

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 28 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Enrico Weigelt 
Reviewed-by: Allison Randal 
Reviewed-by: Kate Stewart 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.534229504@linutronix.de
Signed-off-by: Greg Kroah-Hartman

block/ps3vram: Use %llu to format sector_t after LBDAF removal

2019-06-13T09:17:50+00:00

The removal of CONFIG_LBDAF changed the type of sector_t from "unsigned
long" to "u64" aka "unsigned long long" on 64-bit platforms, leading to
a compiler warning regression:

    drivers/block/ps3vram.c: In function ‘ps3vram_probe’:
    drivers/block/ps3vram.c:770:23: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 4 has type ‘sector_t {aka long long unsigned int}’ [-Wformat=]

Fix this by using "%llu" instead.

Fixes: 72deb455b5ec619f ("block: remove CONFIG_LBDAF")
Signed-off-by: Geert Uytterhoeven 
Signed-off-by: Jens Axboe