linux-stable.git/drivers/block, branch v5.10.45

nbd: Fix NULL pointer in flush_workqueue

2021-05-19T08:13:14+00:00

[ Upstream commit 79ebe9110fa458d58f1fceb078e2068d7ad37390 ]

Open /dev/nbdX first, the config_refs will be 1 and
the pointers in nbd_device are still null. Disconnect
/dev/nbdX, then reference a null recv_workq. The
protection by config_refs in nbd_genl_disconnect is useless.

[  656.366194] BUG: kernel NULL pointer dereference, address: 0000000000000020
[  656.368943] #PF: supervisor write access in kernel mode
[  656.369844] #PF: error_code(0x0002) - not-present page
[  656.370717] PGD 10cc87067 P4D 10cc87067 PUD 1074b4067 PMD 0
[  656.371693] Oops: 0002 [#1] SMP
[  656.372242] CPU: 5 PID: 7977 Comm: nbd-client Not tainted 5.11.0-rc5-00040-g76c057c84d28 #1
[  656.373661] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014
[  656.375904] RIP: 0010:mutex_lock+0x29/0x60
[  656.376627] Code: 00 0f 1f 44 00 00 55 48 89 fd 48 83 05 6f d7 fe 08 01 e8 7a c3 ff ff 48 83 05 6a d7 fe 08 01 31 c0 65 48 8b 14 25 00 6d 01 00  48 0f b1 55 d
[  656.378934] RSP: 0018:ffffc900005eb9b0 EFLAGS: 00010246
[  656.379350] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[  656.379915] RDX: ffff888104cf2600 RSI: ffffffffaae8f452 RDI: 0000000000000020
[  656.380473] RBP: 0000000000000020 R08: 0000000000000000 R09: ffff88813bd6b318
[  656.381039] R10: 00000000000000c7 R11: fefefefefefefeff R12: ffff888102710b40
[  656.381599] R13: ffffc900005eb9e0 R14: ffffffffb2930680 R15: ffff88810770ef00
[  656.382166] FS:  00007fdf117ebb40(0000) GS:ffff88813bd40000(0000) knlGS:0000000000000000
[  656.382806] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  656.383261] CR2: 0000000000000020 CR3: 0000000100c84000 CR4: 00000000000006e0
[  656.383819] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  656.384370] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  656.384927] Call Trace:
[  656.385111]  flush_workqueue+0x92/0x6c0
[  656.385395]  nbd_disconnect_and_put+0x81/0xd0
[  656.385716]  nbd_genl_disconnect+0x125/0x2a0
[  656.386034]  genl_family_rcv_msg_doit.isra.0+0x102/0x1b0
[  656.386422]  genl_rcv_msg+0xfc/0x2b0
[  656.386685]  ? nbd_ioctl+0x490/0x490
[  656.386954]  ? genl_family_rcv_msg_doit.isra.0+0x1b0/0x1b0
[  656.387354]  netlink_rcv_skb+0x62/0x180
[  656.387638]  genl_rcv+0x34/0x60
[  656.387874]  netlink_unicast+0x26d/0x590
[  656.388162]  netlink_sendmsg+0x398/0x6c0
[  656.388451]  ? netlink_rcv_skb+0x180/0x180
[  656.388750]  ____sys_sendmsg+0x1da/0x320
[  656.389038]  ? ____sys_recvmsg+0x130/0x220
[  656.389334]  ___sys_sendmsg+0x8e/0xf0
[  656.389605]  ? ___sys_recvmsg+0xa2/0xf0
[  656.389889]  ? handle_mm_fault+0x1671/0x21d0
[  656.390201]  __sys_sendmsg+0x6d/0xe0
[  656.390464]  __x64_sys_sendmsg+0x23/0x30
[  656.390751]  do_syscall_64+0x45/0x70
[  656.391017]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

To fix it, just add if (nbd->recv_workq) to nbd_disconnect_and_put().

Fixes: e9e006f5fcf2 ("nbd: fix max number of supported devs")
Signed-off-by: Sun Ke 
Reviewed-by: Josef Bacik 
Link: https://lore.kernel.org/r/20210512114331.1233964-2-sunke32@huawei.com
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

block/rnbd-clt: Check the return value of the function rtrs_clt_query

2021-05-19T08:13:06+00:00

[ Upstream commit 1056ad829ec43f9b705b507c2093b05e2088b0b7 ]

In case none of the paths are in connected state, the function
rtrs_clt_query returns an error. In such a case, error out since the
values in the rtrs_attrs structure would be garbage.

Fixes: f7a7a5c228d45 ("block/rnbd: client: main functionality")
Signed-off-by: Md Haris Iqbal 
Reviewed-by: Guoqing Jiang 
Signed-off-by: Jack Wang 
Signed-off-by: Gioh Kim 
Link: https://lore.kernel.org/r/20210428061359.206794-4-gi-oh.kim@ionos.com
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

block/rnbd-clt: Change queue_depth type in rnbd_clt_session to size_t

2021-05-19T08:13:06+00:00

[ Upstream commit 80d43cbd46155744ee450d2476ee4fcf2917ae9b ]

The member queue_depth in the structure rnbd_clt_session is read from the
rtrs client side using the function rtrs_clt_query, which in turn is read
from the rtrs_clt structure. It should really be of type size_t.

Fixes: 90426e89f54db ("block/rnbd: client: private header with client structs and functions")
Signed-off-by: Md Haris Iqbal 
Reviewed-by: Guoqing Jiang 
Signed-off-by: Gioh Kim 
Link: https://lore.kernel.org/r/20210428061359.206794-2-gi-oh.kim@ionos.com
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

drivers/block/null_blk/main: Fix a double free in null_init.

2021-05-14T07:50:28+00:00

[ Upstream commit 72ce11ddfa4e9e1879103581a60b7e34547eaa0a ]

In null_init, null_add_dev(dev) is called.
In null_add_dev, it calls null_free_zoned_dev(dev) to free dev->zones
via kvfree(dev->zones) in out_cleanup_zone branch and returns err.
Then null_init accept the err code and then calls null_free_dev(dev).

But in null_free_dev(dev), dev->zones is freed again by
null_free_zoned_dev().

My patch set dev->zones to NULL in null_free_zoned_dev() after
kvfree(dev->zones) is called, to avoid the double free.

Fixes: 2984c8684f962 ("nullb: factor disk parameters")
Signed-off-by: Lv Yunlong 
Link: https://lore.kernel.org/r/20210426143229.7374-1-lyl2019@mail.ustc.edu.cn
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

xen-blkback: fix compatibility bug with single page rings

2021-05-14T07:50:21+00:00

[ Upstream commit d75e7f63b7c95c527cde42efb5d410d7f961498f ]

Prior to commit 4a8c31a1c6f5 ("xen/blkback: rework connect_ring() to avoid
inconsistent xenstore 'ring-page-order' set by malicious blkfront"), the
behaviour of xen-blkback when connecting to a frontend was:

- read 'ring-page-order'
- if not present then expect a single page ring specified by 'ring-ref'
- else expect a ring specified by 'ring-refX' where X is between 0 and
  1 << ring-page-order

This was correct behaviour, but was broken by the afforementioned commit to
become:

- read 'ring-page-order'
- if not present then expect a single page ring (i.e. ring-page-order = 0)
- expect a ring specified by 'ring-refX' where X is between 0 and
  1 << ring-page-order
- if that didn't work then see if there's a single page ring specified by
  'ring-ref'

This incorrect behaviour works most of the time but fails when a frontend
that sets 'ring-page-order' is unloaded and replaced by one that does not
because, instead of reading 'ring-ref', xen-blkback will read the stale
'ring-ref0' left around by the previous frontend will try to map the wrong
grant reference.

This patch restores the original behaviour.

Fixes: 4a8c31a1c6f5 ("xen/blkback: rework connect_ring() to avoid inconsistent xenstore 'ring-page-order' set by malicious blkfront")
Signed-off-by: Paul Durrant 
Reviewed-by: Dongli Zhang 
Reviewed-by: "Roger Pau Monné" 
Link: https://lore.kernel.org/r/20210202175659.18452-1-paul@xen.org
Signed-off-by: Juergen Gross 
Signed-off-by: Sasha Levin

block/rnbd-clt: Fix missing a memory free when unloading the module

2021-05-11T12:47:31+00:00

[ Upstream commit 12b06533104e802df73c1fbe159437c19933d6c0 ]

When unloading the rnbd-clt module, it does not free a memory
including the filename of the symbolic link to /sys/block/rnbdX.

It is found by kmemleak as below.

unreferenced object 0xffff9f1a83d3c740 (size 16):
  comm "bash", pid 736, jiffies 4295179665 (age 9841.310s)
  hex dump (first 16 bytes):
    21 64 65 76 21 6e 75 6c 6c 62 30 40 62 6c 61 00  !dev!nullb0@bla.
  backtrace:
    [<0000000039f0c55e>] 0xffffffffc0456c24
    [<000000001aab9513>] kernfs_fop_write+0xcf/0x1c0
    [<00000000db5aa4b3>] vfs_write+0xdb/0x1d0
    [<000000007a2e2207>] ksys_write+0x65/0xe0
    [<00000000055e280a>] do_syscall_64+0x50/0x1b0
    [<00000000c2b51831>] entry_SYSCALL_64_after_hwframe+0x49/0xbe

Signed-off-by: Gioh Kim 
Signed-off-by: Jack Wang 
Link: https://lore.kernel.org/r/20210419073722.15351-13-gi-oh.kim@ionos.com
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

null_blk: fix command timeout completion handling

2021-04-16T09:43:21+00:00

[ Upstream commit de3510e52b0a398261271455562458003b8eea62 ]

Memory backed or zoned null block devices may generate actual request
timeout errors due to the submission path being blocked on memory
allocation or zone locking. Unlike fake timeouts or injected timeouts,
the request submission path will call blk_mq_complete_request() or
blk_mq_end_request() for these real timeout errors, causing a double
completion and use after free situation as the block layer timeout
handler executes blk_mq_rq_timed_out() and __blk_mq_free_request() in
blk_mq_check_expired(). This problem often triggers a NULL pointer
dereference such as:

BUG: kernel NULL pointer dereference, address: 0000000000000050
RIP: 0010:blk_mq_sched_mark_restart_hctx+0x5/0x20
...
Call Trace:
  dd_finish_request+0x56/0x80
  blk_mq_free_request+0x37/0x130
  null_handle_cmd+0xbf/0x250 [null_blk]
  ? null_queue_rq+0x67/0xd0 [null_blk]
  blk_mq_dispatch_rq_list+0x122/0x850
  __blk_mq_do_dispatch_sched+0xbb/0x2c0
  __blk_mq_sched_dispatch_requests+0x13d/0x190
  blk_mq_sched_dispatch_requests+0x30/0x60
  __blk_mq_run_hw_queue+0x49/0x90
  process_one_work+0x26c/0x580
  worker_thread+0x55/0x3c0
  ? process_one_work+0x580/0x580
  kthread+0x134/0x150
  ? kthread_create_worker_on_cpu+0x70/0x70
  ret_from_fork+0x1f/0x30

This problem very often triggers when running the full btrfs xfstests
on a memory-backed zoned null block device in a VM with limited amount
of memory.

Avoid this by executing blk_mq_complete_request() in null_timeout_rq()
only for commands that are marked for a fake timeout completion using
the fake_timeout boolean in struct null_cmd. For timeout errors injected
through debugfs, the timeout handler will execute
blk_mq_complete_request()i as before. This is safe as the submission
path does not execute complete requests in this case.

In null_timeout_rq(), also make sure to set the command error field to
BLK_STS_TIMEOUT and to propagate this error through to the request
completion.

Reported-by: Johannes Thumshirn 
Signed-off-by: Damien Le Moal 
Tested-by: Johannes Thumshirn 
Reviewed-by: Johannes Thumshirn 
Link: https://lore.kernel.org/r/20210331225244.126426-1-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

xen-blkback: don't leak persistent grants from xen_blkbk_map()

2021-03-30T12:32:09+00:00

commit a846738f8c3788d846ed1f587270d2f2e3d32432 upstream.

The fix for XSA-365 zapped too many of the ->persistent_gnt[] entries.
Ones successfully obtained should not be overwritten, but instead left
for xen_blkbk_unmap_prepare() to pick up and put.

This is XSA-371.

Signed-off-by: Jan Beulich 
Cc: stable@vger.kernel.org
Reviewed-by: Juergen Gross 
Reviewed-by: Wei Liu 
Signed-off-by: Juergen Gross 
Signed-off-by: Greg Kroah-Hartman

umem: fix error return code in mm_pci_probe()

2021-03-30T12:31:50+00:00

[ Upstream commit eeb05595d22c19c8f814ff893dcf88ec277a2365 ]

Fix to return negative error code -ENOMEM from the blk_alloc_queue()
and dma_alloc_coherent() error handling cases instead of 0, as done
elsewhere in this function.

Reported-by: Hulk Robot 
Signed-off-by: Wei Yongjun 
Link: https://lore.kernel.org/r/20210308123501.2573816-1-weiyongjun1@huawei.com
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

zram: fix return value on writeback_store

2021-03-17T16:06:34+00:00

commit 57e0076e6575a7b7cef620a0bd2ee2549ef77818 upstream.

writeback_store's return value is overwritten by submit_bio_wait's return
value.  Thus, writeback_store will return zero since there was no IO
error.  In the end, write syscall from userspace will see the zero as
return value, which could make the process stall to keep trying the write
until it will succeed.

Link: https://lkml.kernel.org/r/20210312173949.2197662-1-minchan@kernel.org
Fixes: 3b82a051c101("drivers/block/zram/zram_drv.c: fix error return codes not being returned in writeback_store")
Signed-off-by: Minchan Kim 
Cc: Sergey Senozhatsky 
Cc: Colin Ian King 
Cc: John Dias 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman