linux-stable.git/drivers/block, branch v4.9.321 Linux kernel stable tree drbd: remove usage of list iterator variable after loop 2022-05-25T06:39:48+00:00 Jakob Koschel jakobkoschel@gmail.com 2022-03-31T22:03:48+00:00 5d0e7ff8a1a54a588620f41030cdaf481735cc48 [ Upstream commit 901aeda62efa21f2eae937bccb71b49ae531be06 ] In preparation to limit the scope of a list iterator to the list traversal loop, use a dedicated pointer to iterate through the list [1]. Since that variable should not be used past the loop iteration, a separate variable is used to 'remember the current location within the loop'. To either continue iterating from that position or skip the iteration (if the previous iteration was complete) list_prepare_entry() is used. Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1] Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com> Link: https://lore.kernel.org/r/20220331220349.885126-1-jakobkoschel@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 901aeda62efa21f2eae937bccb71b49ae531be06 ]

In preparation to limit the scope of a list iterator to the list
traversal loop, use a dedicated pointer to iterate through the list [1].

Since that variable should not be used past the loop iteration, a
separate variable is used to 'remember the current location within the
loop'.

To either continue iterating from that position or skip the iteration
(if the previous iteration was complete) list_prepare_entry() is used.

Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1]
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20220331220349.885126-1-jakobkoschel@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
floppy: use a statically allocated error counter 2022-05-25T06:39:47+00:00 Willy Tarreau w@1wt.eu 2022-05-08T09:37:07+00:00 2adafe1c646b462c755e99216f966927eec96059 commit f71f01394f742fc4558b3f9f4c7ef4c4cf3b07c8 upstream. Interrupt handler bad_flp_intr() may cause a UAF on the recently freed request just to increment the error count. There's no point keeping that one in the request anyway, and since the interrupt handler uses a static pointer to the error which cannot be kept in sync with the pending request, better make it use a static error counter that's reset for each new request. This reset now happens when entering redo_fd_request() for a new request via set_next_request(). One initial concern about a single error counter was that errors on one floppy drive could be reported on another one, but this problem is not real given that the driver uses a single drive at a time, as that PC-compatible controllers also have this limitation by using shared signals. As such the error count is always for the "current" drive. Reported-by: Minh Yuan <yuanmingbuaa@gmail.com> Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org> Tested-by: Denis Efremov <efremov@linux.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f71f01394f742fc4558b3f9f4c7ef4c4cf3b07c8 upstream.

Interrupt handler bad_flp_intr() may cause a UAF on the recently freed
request just to increment the error count.  There's no point keeping
that one in the request anyway, and since the interrupt handler uses a
static pointer to the error which cannot be kept in sync with the
pending request, better make it use a static error counter that's reset
for each new request.  This reset now happens when entering
redo_fd_request() for a new request via set_next_request().

One initial concern about a single error counter was that errors on one
floppy drive could be reported on another one, but this problem is not
real given that the driver uses a single drive at a time, as that
PC-compatible controllers also have this limitation by using shared
signals.  As such the error count is always for the "current" drive.

Reported-by: Minh Yuan <yuanmingbuaa@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Tested-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
block: drbd: drbd_nl: Make conversion to 'enum drbd_ret_code' explicit 2022-05-15T17:39:17+00:00 Lee Jones lee.jones@linaro.org 2021-03-12T10:55:26+00:00 8532c1d872c1f39edfe7a46a12d0b0511e4c7ed4 commit 1f1e87b4dc4598eac57a69868534b92d65e47e82 upstream. Fixes the following W=1 kernel build warning(s): from drivers/block/drbd/drbd_nl.c:24: drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_set_role’: drivers/block/drbd/drbd_nl.c:793:11: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion] drivers/block/drbd/drbd_nl.c:795:11: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion] drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_attach’: drivers/block/drbd/drbd_nl.c:1965:10: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion] drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_connect’: drivers/block/drbd/drbd_nl.c:2690:10: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion] drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_disconnect’: drivers/block/drbd/drbd_nl.c:2803:11: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion] Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: drbd-dev@lists.linbit.com Cc: linux-block@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210312105530.2219008-8-lee.jones@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Cc: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1f1e87b4dc4598eac57a69868534b92d65e47e82 upstream.

Fixes the following W=1 kernel build warning(s):

 from drivers/block/drbd/drbd_nl.c:24:
 drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_set_role’:
 drivers/block/drbd/drbd_nl.c:793:11: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion]
 drivers/block/drbd/drbd_nl.c:795:11: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion]
 drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_attach’:
 drivers/block/drbd/drbd_nl.c:1965:10: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion]
 drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_connect’:
 drivers/block/drbd/drbd_nl.c:2690:10: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion]
 drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_disconnect’:
 drivers/block/drbd/drbd_nl.c:2803:11: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion]

Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: drbd-dev@lists.linbit.com
Cc: linux-block@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210312105530.2219008-8-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
floppy: disable FDRAWCMD by default 2022-05-12T10:14:53+00:00 Willy Tarreau w@1wt.eu 2022-04-26T20:41:05+00:00 0dd02ff72c6daf4e7800fb5dd1109fbacdde97dc commit 233087ca063686964a53c829d547c7571e3f67bf upstream. Minh Yuan reported a concurrency use-after-free issue in the floppy code between raw_cmd_ioctl and seek_interrupt. [ It turns out this has been around, and that others have reported the KASAN splats over the years, but Minh Yuan had a reproducer for it and so gets primary credit for reporting it for this fix - Linus ] The problem is, this driver tends to break very easily and nowadays, nobody is expected to use FDRAWCMD anyway since it was used to manipulate non-standard formats. The risk of breaking the driver is higher than the risk presented by this race, and accessing the device requires privileges anyway. Let's just add a config option to completely disable this ioctl and leave it disabled by default. Distros shouldn't use it, and only those running on antique hardware might need to enable it. Link: https://lore.kernel.org/all/000000000000b71cdd05d703f6bf@google.com/ Link: https://lore.kernel.org/lkml/CAKcFiNC=MfYVW-Jt9A3=FPJpTwCD2PL_ULNCpsCVE5s8ZeBQgQ@mail.gmail.com Link: https://lore.kernel.org/all/CAEAjamu1FRhz6StCe_55XY5s389ZP_xmCF69k987En+1z53=eg@mail.gmail.com Reported-by: Minh Yuan <yuanmingbuaa@gmail.com> Reported-by: syzbot+8e8958586909d62b6840@syzkaller.appspotmail.com Reported-by: cruise k <cruise4k@gmail.com> Reported-by: Kyungtae Kim <kt0755@gmail.com> Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org> Tested-by: Denis Efremov <efremov@linux.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 233087ca063686964a53c829d547c7571e3f67bf upstream.

Minh Yuan reported a concurrency use-after-free issue in the floppy code
between raw_cmd_ioctl and seek_interrupt.

[ It turns out this has been around, and that others have reported the
  KASAN splats over the years, but Minh Yuan had a reproducer for it and
  so gets primary credit for reporting it for this fix   - Linus ]

The problem is, this driver tends to break very easily and nowadays,
nobody is expected to use FDRAWCMD anyway since it was used to
manipulate non-standard formats.  The risk of breaking the driver is
higher than the risk presented by this race, and accessing the device
requires privileges anyway.

Let's just add a config option to completely disable this ioctl and
leave it disabled by default.  Distros shouldn't use it, and only those
running on antique hardware might need to enable it.

Link: https://lore.kernel.org/all/000000000000b71cdd05d703f6bf@google.com/
Link: https://lore.kernel.org/lkml/CAKcFiNC=MfYVW-Jt9A3=FPJpTwCD2PL_ULNCpsCVE5s8ZeBQgQ@mail.gmail.com
Link: https://lore.kernel.org/all/CAEAjamu1FRhz6StCe_55XY5s389ZP_xmCF69k987En+1z53=eg@mail.gmail.com
Reported-by: Minh Yuan <yuanmingbuaa@gmail.com>
Reported-by: syzbot+8e8958586909d62b6840@syzkaller.appspotmail.com
Reported-by: cruise k <cruise4k@gmail.com>
Reported-by: Kyungtae Kim <kt0755@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Tested-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drbd: Fix five use after free bugs in get_initial_state 2022-04-20T07:06:44+00:00 Lv Yunlong lyl2019@mail.ustc.edu.cn 2022-04-06T19:04:43+00:00 0489700bfeb1e53eb2039c2291c67e71b0b40103 [ Upstream commit aadb22ba2f656581b2f733deb3a467c48cc618f6 ] In get_initial_state, it calls notify_initial_state_done(skb,..) if cb->args[5]==1. If genlmsg_put() failed in notify_initial_state_done(), the skb will be freed by nlmsg_free(skb). Then get_initial_state will goto out and the freed skb will be used by return value skb->len, which is a uaf bug. What's worse, the same problem goes even further: skb can also be freed in the notify_*_state_change -> notify_*_state calls below. Thus 4 additional uaf bugs happened. My patch lets the problem callee functions: notify_initial_state_done and notify_*_state_change return an error code if errors happen. So that the error codes could be propagated and the uaf bugs can be avoid. v2 reports a compilation warning. This v3 fixed this warning and built successfully in my local environment with no additional warnings. v2: https://lore.kernel.org/patchwork/patch/1435218/ Fixes: a29728463b254 ("drbd: Backport the "events2" command") Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn> Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit aadb22ba2f656581b2f733deb3a467c48cc618f6 ]

In get_initial_state, it calls notify_initial_state_done(skb,..) if
cb->args[5]==1. If genlmsg_put() failed in notify_initial_state_done(),
the skb will be freed by nlmsg_free(skb).
Then get_initial_state will goto out and the freed skb will be used by
return value skb->len, which is a uaf bug.

What's worse, the same problem goes even further: skb can also be
freed in the notify_*_state_change -> notify_*_state calls below.
Thus 4 additional uaf bugs happened.

My patch lets the problem callee functions: notify_initial_state_done
and notify_*_state_change return an error code if errors happen.
So that the error codes could be propagated and the uaf bugs can be avoid.

v2 reports a compilation warning. This v3 fixed this warning and built
successfully in my local environment with no additional warnings.
v2: https://lore.kernel.org/patchwork/patch/1435218/

Fixes: a29728463b254 ("drbd: Backport the "events2" command")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
loop: use sysfs_emit() in the sysfs xxx show() 2022-04-20T07:06:38+00:00 Chaitanya Kulkarni kch@nvidia.com 2022-02-15T21:33:07+00:00 0e0d0dc27dad0036874d18f712b76ff05a3b89f9 [ Upstream commit b27824d31f09ea7b4a6ba2c1b18bd328df3e8bed ] sprintf does not know the PAGE_SIZE maximum of the temporary buffer used for outputting sysfs content and it's possible to overrun the PAGE_SIZE buffer length. Use a generic sysfs_emit function that knows the size of the temporary buffer and ensures that no overrun is done for offset attribute in loop_attr_[offset|sizelimit|autoclear|partscan|dio]_show() callbacks. Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Link: https://lore.kernel.org/r/20220215213310.7264-2-kch@nvidia.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit b27824d31f09ea7b4a6ba2c1b18bd328df3e8bed ]

sprintf does not know the PAGE_SIZE maximum of the temporary buffer
used for outputting sysfs content and it's possible to overrun the
PAGE_SIZE buffer length.

Use a generic sysfs_emit function that knows the size of the
temporary buffer and ensures that no overrun is done for offset
attribute in
loop_attr_[offset|sizelimit|autoclear|partscan|dio]_show() callbacks.

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Link: https://lore.kernel.org/r/20220215213310.7264-2-kch@nvidia.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
virtio-blk: Use blk_validate_block_size() to validate block size 2022-04-20T07:06:28+00:00 Xie Yongji xieyongji@bytedance.com 2021-10-26T14:40:15+00:00 1cd34300f455d5d61f222c37743dfbaf4904d0fb commit 57a13a5b8157d9a8606490aaa1b805bafe6c37e1 upstream. The block layer can't support a block size larger than page size yet. And a block size that's too small or not a power of two won't work either. If a misconfigured device presents an invalid block size in configuration space, it will result in the kernel crash something like below: [ 506.154324] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 506.160416] RIP: 0010:create_empty_buffers+0x24/0x100 [ 506.174302] Call Trace: [ 506.174651] create_page_buffers+0x4d/0x60 [ 506.175207] block_read_full_page+0x50/0x380 [ 506.175798] ? __mod_lruvec_page_state+0x60/0xa0 [ 506.176412] ? __add_to_page_cache_locked+0x1b2/0x390 [ 506.177085] ? blkdev_direct_IO+0x4a0/0x4a0 [ 506.177644] ? scan_shadow_nodes+0x30/0x30 [ 506.178206] ? lru_cache_add+0x42/0x60 [ 506.178716] do_read_cache_page+0x695/0x740 [ 506.179278] ? read_part_sector+0xe0/0xe0 [ 506.179821] read_part_sector+0x36/0xe0 [ 506.180337] adfspart_check_ICS+0x32/0x320 [ 506.180890] ? snprintf+0x45/0x70 [ 506.181350] ? read_part_sector+0xe0/0xe0 [ 506.181906] bdev_disk_changed+0x229/0x5c0 [ 506.182483] blkdev_get_whole+0x6d/0x90 [ 506.183013] blkdev_get_by_dev+0x122/0x2d0 [ 506.183562] device_add_disk+0x39e/0x3c0 [ 506.184472] virtblk_probe+0x3f8/0x79b [virtio_blk] [ 506.185461] virtio_dev_probe+0x15e/0x1d0 [virtio] So let's use a block layer helper to validate the block size. Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20211026144015.188-5-xieyongji@bytedance.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 57a13a5b8157d9a8606490aaa1b805bafe6c37e1 upstream.

The block layer can't support a block size larger than
page size yet. And a block size that's too small or
not a power of two won't work either. If a misconfigured
device presents an invalid block size in configuration space,
it will result in the kernel crash something like below:

[  506.154324] BUG: kernel NULL pointer dereference, address: 0000000000000008
[  506.160416] RIP: 0010:create_empty_buffers+0x24/0x100
[  506.174302] Call Trace:
[  506.174651]  create_page_buffers+0x4d/0x60
[  506.175207]  block_read_full_page+0x50/0x380
[  506.175798]  ? __mod_lruvec_page_state+0x60/0xa0
[  506.176412]  ? __add_to_page_cache_locked+0x1b2/0x390
[  506.177085]  ? blkdev_direct_IO+0x4a0/0x4a0
[  506.177644]  ? scan_shadow_nodes+0x30/0x30
[  506.178206]  ? lru_cache_add+0x42/0x60
[  506.178716]  do_read_cache_page+0x695/0x740
[  506.179278]  ? read_part_sector+0xe0/0xe0
[  506.179821]  read_part_sector+0x36/0xe0
[  506.180337]  adfspart_check_ICS+0x32/0x320
[  506.180890]  ? snprintf+0x45/0x70
[  506.181350]  ? read_part_sector+0xe0/0xe0
[  506.181906]  bdev_disk_changed+0x229/0x5c0
[  506.182483]  blkdev_get_whole+0x6d/0x90
[  506.183013]  blkdev_get_by_dev+0x122/0x2d0
[  506.183562]  device_add_disk+0x39e/0x3c0
[  506.184472]  virtblk_probe+0x3f8/0x79b [virtio_blk]
[  506.185461]  virtio_dev_probe+0x15e/0x1d0 [virtio]

So let's use a block layer helper to validate the block size.

Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20211026144015.188-5-xieyongji@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xen/blkfront: don't use gnttab_query_foreign_access() for mapped status 2022-03-11T09:03:32+00:00 Juergen Gross jgross@suse.com 2022-02-25T15:05:41+00:00 f306575016dcf47ed6cd40e1fe872a4d8c665a8b Commit abf1fd5919d6238ee3bc5eb4a9b6c3947caa6638 upstream. It isn't enough to check whether a grant is still being in use by calling gnttab_query_foreign_access(), as a mapping could be realized by the other side just after having called that function. In case the call was done in preparation of revoking a grant it is better to do so via gnttab_end_foreign_access_ref() and check the success of that operation instead. For the ring allocation use alloc_pages_exact() in order to avoid high order pages in case of a multi-page ring. If a grant wasn't unmapped by the backend without persistent grants being used, set the device state to "error". This is CVE-2022-23036 / part of XSA-396. Reported-by: Demi Marie Obenour <demi@invisiblethingslab.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Commit abf1fd5919d6238ee3bc5eb4a9b6c3947caa6638 upstream.

It isn't enough to check whether a grant is still being in use by
calling gnttab_query_foreign_access(), as a mapping could be realized
by the other side just after having called that function.

In case the call was done in preparation of revoking a grant it is
better to do so via gnttab_end_foreign_access_ref() and check the
success of that operation instead.

For the ring allocation use alloc_pages_exact() in order to avoid
high order pages in case of a multi-page ring.

If a grant wasn't unmapped by the backend without persistent grants
being used, set the device state to "error".

This is CVE-2022-23036 / part of XSA-396.

Reported-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
floppy: Add max size check for user space request 2022-01-27T07:47:37+00:00 Xiongwei Song sxwjean@gmail.com 2021-11-16T13:10:33+00:00 27e1d7498a55fa2bf9cc275f347bfda5c0ebd9ab [ Upstream commit 545a32498c536ee152331cd2e7d2416aa0f20e01 ] We need to check the max request size that is from user space before allocating pages. If the request size exceeds the limit, return -EINVAL. This check can avoid the warning below from page allocator. WARNING: CPU: 3 PID: 16525 at mm/page_alloc.c:5344 current_gfp_context include/linux/sched/mm.h:195 [inline] WARNING: CPU: 3 PID: 16525 at mm/page_alloc.c:5344 __alloc_pages+0x45d/0x500 mm/page_alloc.c:5356 Modules linked in: CPU: 3 PID: 16525 Comm: syz-executor.3 Not tainted 5.15.0-syzkaller #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 RIP: 0010:__alloc_pages+0x45d/0x500 mm/page_alloc.c:5344 Code: be c9 00 00 00 48 c7 c7 20 4a 97 89 c6 05 62 32 a7 0b 01 e8 74 9a 42 07 e9 6a ff ff ff 0f 0b e9 a0 fd ff ff 40 80 e5 3f eb 88 <0f> 0b e9 18 ff ff ff 4c 89 ef 44 89 e6 45 31 ed e8 1e 76 ff ff e9 RSP: 0018:ffffc90023b87850 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 1ffff92004770f0b RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000000033 RDI: 0000000000010cc1 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001 R10: ffffffff81bb4686 R11: 0000000000000001 R12: ffffffff902c1960 R13: 0000000000000033 R14: 0000000000000000 R15: ffff88804cf64a30 FS: 0000000000000000(0000) GS:ffff88802cd00000(0063) knlGS:00000000f44b4b40 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 000000002c921000 CR3: 000000004f507000 CR4: 0000000000150ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> alloc_pages+0x1a7/0x300 mm/mempolicy.c:2191 __get_free_pages+0x8/0x40 mm/page_alloc.c:5418 raw_cmd_copyin drivers/block/floppy.c:3113 [inline] raw_cmd_ioctl drivers/block/floppy.c:3160 [inline] fd_locked_ioctl+0x12e5/0x2820 drivers/block/floppy.c:3528 fd_ioctl drivers/block/floppy.c:3555 [inline] fd_compat_ioctl+0x891/0x1b60 drivers/block/floppy.c:3869 compat_blkdev_ioctl+0x3b8/0x810 block/ioctl.c:662 __do_compat_sys_ioctl+0x1c7/0x290 fs/ioctl.c:972 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0x65/0xf0 arch/x86/entry/common.c:178 do_fast_syscall_32+0x2f/0x70 arch/x86/entry/common.c:203 entry_SYSENTER_compat_after_hwframe+0x4d/0x5c Reported-by: syzbot+23a02c7df2cf2bc93fa2@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20211116131033.27685-1-sxwjean@me.com Signed-off-by: Xiongwei Song <sxwjean@gmail.com> Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 545a32498c536ee152331cd2e7d2416aa0f20e01 ]

We need to check the max request size that is from user space before
allocating pages. If the request size exceeds the limit, return -EINVAL.
This check can avoid the warning below from page allocator.

WARNING: CPU: 3 PID: 16525 at mm/page_alloc.c:5344 current_gfp_context include/linux/sched/mm.h:195 [inline]
WARNING: CPU: 3 PID: 16525 at mm/page_alloc.c:5344 __alloc_pages+0x45d/0x500 mm/page_alloc.c:5356
Modules linked in:
CPU: 3 PID: 16525 Comm: syz-executor.3 Not tainted 5.15.0-syzkaller #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
RIP: 0010:__alloc_pages+0x45d/0x500 mm/page_alloc.c:5344
Code: be c9 00 00 00 48 c7 c7 20 4a 97 89 c6 05 62 32 a7 0b 01 e8 74 9a 42 07 e9 6a ff ff ff 0f 0b e9 a0 fd ff ff 40 80 e5 3f eb 88 <0f> 0b e9 18 ff ff ff 4c 89 ef 44 89 e6 45 31 ed e8 1e 76 ff ff e9
RSP: 0018:ffffc90023b87850 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 1ffff92004770f0b RCX: dffffc0000000000
RDX: 0000000000000000 RSI: 0000000000000033 RDI: 0000000000010cc1
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001
R10: ffffffff81bb4686 R11: 0000000000000001 R12: ffffffff902c1960
R13: 0000000000000033 R14: 0000000000000000 R15: ffff88804cf64a30
FS:  0000000000000000(0000) GS:ffff88802cd00000(0063) knlGS:00000000f44b4b40
CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
CR2: 000000002c921000 CR3: 000000004f507000 CR4: 0000000000150ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 alloc_pages+0x1a7/0x300 mm/mempolicy.c:2191
 __get_free_pages+0x8/0x40 mm/page_alloc.c:5418
 raw_cmd_copyin drivers/block/floppy.c:3113 [inline]
 raw_cmd_ioctl drivers/block/floppy.c:3160 [inline]
 fd_locked_ioctl+0x12e5/0x2820 drivers/block/floppy.c:3528
 fd_ioctl drivers/block/floppy.c:3555 [inline]
 fd_compat_ioctl+0x891/0x1b60 drivers/block/floppy.c:3869
 compat_blkdev_ioctl+0x3b8/0x810 block/ioctl.c:662
 __do_compat_sys_ioctl+0x1c7/0x290 fs/ioctl.c:972
 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline]
 __do_fast_syscall_32+0x65/0xf0 arch/x86/entry/common.c:178
 do_fast_syscall_32+0x2f/0x70 arch/x86/entry/common.c:203
 entry_SYSENTER_compat_after_hwframe+0x4d/0x5c

Reported-by: syzbot+23a02c7df2cf2bc93fa2@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20211116131033.27685-1-sxwjean@me.com
Signed-off-by: Xiongwei Song <sxwjean@gmail.com>
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
floppy: Fix hang in watchdog when disk is ejected 2022-01-27T07:47:34+00:00 Tasos Sahanidis tasos@tasossah.com 2021-09-03T06:47:58+00:00 330e2f1fcaa9865670992483161849e88b8d2cc7 [ Upstream commit fb48febce7e30baed94dd791e19521abd2c3fd83 ] When the watchdog detects a disk change, it calls cancel_activity(), which in turn tries to cancel the fd_timer delayed work. In the above scenario, fd_timer_fn is set to fd_watchdog(), meaning it is trying to cancel its own work. This results in a hang as cancel_delayed_work_sync() is waiting for the watchdog (itself) to return, which never happens. This can be reproduced relatively consistently by attempting to read a broken floppy, and ejecting it while IO is being attempted and retried. To resolve this, this patch calls cancel_delayed_work() instead, which cancels the work without waiting for the watchdog to return and finish. Before this regression was introduced, the code in this section used del_timer(), and not del_timer_sync() to delete the watchdog timer. Link: https://lore.kernel.org/r/399e486c-6540-db27-76aa-7a271b061f76@tasossah.com Fixes: 070ad7e793dc ("floppy: convert to delayed work and single-thread wq") Signed-off-by: Tasos Sahanidis <tasos@tasossah.com> Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit fb48febce7e30baed94dd791e19521abd2c3fd83 ]

When the watchdog detects a disk change, it calls cancel_activity(),
which in turn tries to cancel the fd_timer delayed work.

In the above scenario, fd_timer_fn is set to fd_watchdog(), meaning
it is trying to cancel its own work.
This results in a hang as cancel_delayed_work_sync() is waiting for the
watchdog (itself) to return, which never happens.

This can be reproduced relatively consistently by attempting to read a
broken floppy, and ejecting it while IO is being attempted and retried.

To resolve this, this patch calls cancel_delayed_work() instead, which
cancels the work without waiting for the watchdog to return and finish.

Before this regression was introduced, the code in this section used
del_timer(), and not del_timer_sync() to delete the watchdog timer.

Link: https://lore.kernel.org/r/399e486c-6540-db27-76aa-7a271b061f76@tasossah.com
Fixes: 070ad7e793dc ("floppy: convert to delayed work and single-thread wq")
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>