linux-stable.git/drivers/block, branch v4.4.185

xsysace: Fix error handling in ace_setup

2019-05-16T17:45:02+00:00

[ Upstream commit 47b16820c490149c2923e8474048f2c6e7557cab ]

If xace hardware reports a bad version number, the error handling code
in ace_setup() calls put_disk(), followed by queue cleanup. However, since
the disk data structure has the queue pointer set, put_disk() also
cleans and releases the queue. This results in blk_cleanup_queue()
accessing an already released data structure, which in turn may result
in a crash such as the following.

[   10.681671] BUG: Kernel NULL pointer dereference at 0x00000040
[   10.681826] Faulting instruction address: 0xc0431480
[   10.682072] Oops: Kernel access of bad area, sig: 11 [#1]
[   10.682251] BE PAGE_SIZE=4K PREEMPT Xilinx Virtex440
[   10.682387] Modules linked in:
[   10.682528] CPU: 0 PID: 1 Comm: swapper Tainted: G        W         5.0.0-rc6-next-20190218+ #2
[   10.682733] NIP:  c0431480 LR: c043147c CTR: c0422ad8
[   10.682863] REGS: cf82fbe0 TRAP: 0300   Tainted: G        W          (5.0.0-rc6-next-20190218+)
[   10.683065] MSR:  00029000   CR: 22000222  XER: 00000000
[   10.683236] DEAR: 00000040 ESR: 00000000
[   10.683236] GPR00: c043147c cf82fc90 cf82ccc0 00000000 00000000 00000000 00000002 00000000
[   10.683236] GPR08: 00000000 00000000 c04310bc 00000000 22000222 00000000 c0002c54 00000000
[   10.683236] GPR16: 00000000 00000001 c09aa39c c09021b0 c09021dc 00000007 c0a68c08 00000000
[   10.683236] GPR24: 00000001 ced6d400 ced6dcf0 c0815d9c 00000000 00000000 00000000 cedf0800
[   10.684331] NIP [c0431480] blk_mq_run_hw_queue+0x28/0x114
[   10.684473] LR [c043147c] blk_mq_run_hw_queue+0x24/0x114
[   10.684602] Call Trace:
[   10.684671] [cf82fc90] [c043147c] blk_mq_run_hw_queue+0x24/0x114 (unreliable)
[   10.684854] [cf82fcc0] [c04315bc] blk_mq_run_hw_queues+0x50/0x7c
[   10.685002] [cf82fce0] [c0422b24] blk_set_queue_dying+0x30/0x68
[   10.685154] [cf82fcf0] [c0423ec0] blk_cleanup_queue+0x34/0x14c
[   10.685306] [cf82fd10] [c054d73c] ace_probe+0x3dc/0x508
[   10.685445] [cf82fd50] [c052d740] platform_drv_probe+0x4c/0xb8
[   10.685592] [cf82fd70] [c052abb0] really_probe+0x20c/0x32c
[   10.685728] [cf82fda0] [c052ae58] driver_probe_device+0x68/0x464
[   10.685877] [cf82fdc0] [c052b500] device_driver_attach+0xb4/0xe4
[   10.686024] [cf82fde0] [c052b5dc] __driver_attach+0xac/0xfc
[   10.686161] [cf82fe00] [c0528428] bus_for_each_dev+0x80/0xc0
[   10.686314] [cf82fe30] [c0529b3c] bus_add_driver+0x144/0x234
[   10.686457] [cf82fe50] [c052c46c] driver_register+0x88/0x15c
[   10.686610] [cf82fe60] [c09de288] ace_init+0x4c/0xac
[   10.686742] [cf82fe80] [c0002730] do_one_initcall+0xac/0x330
[   10.686888] [cf82fee0] [c09aafd0] kernel_init_freeable+0x34c/0x478
[   10.687043] [cf82ff30] [c0002c6c] kernel_init+0x18/0x114
[   10.687188] [cf82ff40] [c000f2f0] ret_from_kernel_thread+0x14/0x1c
[   10.687349] Instruction dump:
[   10.687435] 3863ffd4 4bfffd70 9421ffd0 7c0802a6 93c10028 7c9e2378 93e1002c 38810008
[   10.687637] 7c7f1b78 90010034 4bfffc25 813f008c <81290040> 75290100 4182002c 80810008
[   10.688056] ---[ end trace 13c9ff51d41b9d40 ]---

Fix the problem by setting the disk queue pointer to NULL before calling
put_disk(). A more comprehensive fix might be to rearrange the code
to check the hardware version before initializing data structures,
but I don't know if this would have undesirable side effects, and
it would increase the complexity of backporting the fix to older kernels.

Fixes: 74489a91dd43a ("Add support for Xilinx SystemACE CompactFlash interface")
Acked-by: Michal Simek 
Signed-off-by: Guenter Roeck 
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

Revert "block/loop: Use global lock for ioctl() operation."

2019-05-16T17:44:52+00:00

This reverts commit b3f3107fbd928fed6e4fecbe3da2ed5f43216439 which is
commit 310ca162d779efee8a2dc3731439680f3e9c1e86 upstream.

Jan Kara has reported seeing problems with this patch applied, as has
Salvatore Bonaccorso, so let's drop it for now.

Reported-by: Salvatore Bonaccorso 
Reported-by: Jan Kara 
Cc: Tetsuo Handa 
Cc: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

block/swim3: Fix -EBUSY error when re-opening device after unmount

2019-02-20T09:13:13+00:00

[ Upstream commit 296dcc40f2f2e402facf7cd26cf3f2c8f4b17d47 ]

When the block device is opened with FMODE_EXCL, ref_count is set to -1.
This value doesn't get reset when the device is closed which means the
device cannot be opened again. Fix this by checking for refcount <= 0
in the release method.

Reported-and-tested-by: Stan Johnson 
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Finn Thain 
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

drbd: skip spurious timeout (ping-timeo) when failing promote

2019-02-20T09:13:11+00:00

[ Upstream commit 9848b6ddd8c92305252f94592c5e278574e7a6ac ]

If you try to promote a Secondary while connected to a Primary
and allow-two-primaries is NOT set, we will wait for "ping-timeout"
to give this node a chance to detect a dead primary,
in case the cluster manager noticed faster than we did.

But if we then are *still* connected to a Primary,
we fail (after an additional timeout of ping-timout).

This change skips the spurious second timeout.

Most people won't notice really,
since "ping-timeout" by default is half a second.

But in some installations, ping-timeout may be 10 or 20 seconds or more,
and spuriously delaying the error return becomes annoying.

Signed-off-by: Lars Ellenberg 
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

drbd: disconnect, if the wrong UUIDs are attached on a connected peer

2019-02-20T09:13:11+00:00

[ Upstream commit b17b59602b6dcf8f97a7dc7bc489a48388d7063a ]

With "on-no-data-accessible suspend-io", DRBD requires the next attach
or connect to be to the very same data generation uuid tag it lost last.

If we first lost connection to the peer,
then later lost connection to our own disk,
we would usually refuse to re-connect to the peer,
because it presents the wrong data set.

However, if the peer first connects without a disk,
and then attached its disk, we accepted that same wrong data set,
which would be "unexpected" by any user of that DRBD
and cause "undefined results" (read: very likely data corruption).

The fix is to forcefully disconnect as soon as we notice that the peer
attached to the "wrong" dataset.

Signed-off-by: Lars Ellenberg 
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

drbd: narrow rcu_read_lock in drbd_sync_handshake

2019-02-20T09:13:11+00:00

[ Upstream commit d29e89e34952a9ad02c77109c71a80043544296e ]

So far there was the possibility that we called
genlmsg_new(GFP_NOIO)/mutex_lock() while holding an rcu_read_lock().

This included cases like:

drbd_sync_handshake (acquire the RCU lock)
  drbd_asb_recover_1p
    drbd_khelper
      drbd_bcast_event
        genlmsg_new(GFP_NOIO) --> may sleep

drbd_sync_handshake (acquire the RCU lock)
  drbd_asb_recover_1p
    drbd_khelper
      notify_helper
        genlmsg_new(GFP_NOIO) --> may sleep

drbd_sync_handshake (acquire the RCU lock)
  drbd_asb_recover_1p
    drbd_khelper
      notify_helper
        mutex_lock --> may sleep

While using GFP_ATOMIC whould have been possible in the first two cases,
the real fix is to narrow the rcu_read_lock.

Reported-by: Jia-Ju Bai 
Reviewed-by: Lars Ellenberg 
Signed-off-by: Roland Kammerer 
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

sunvdc: Do not spin in an infinite loop when vio_ldc_send() returns EAGAIN

2019-02-20T09:13:06+00:00

[ Upstream commit a11f6ca9aef989b56cd31ff4ee2af4fb31a172ec ]

__vdc_tx_trigger should only loop on EAGAIN a finite
number of times.

See commit adddc32d6fde ("sunvnet: Do not spin in an
infinite loop when vio_ldc_send() returns EAGAIN") for detail.

Signed-off-by: Young Xiao 
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

Revert "loop: Fold __loop_release into loop_release"

2019-02-06T18:43:05+00:00

This reverts commit 4ee414c3b6021db621901f2697d35774926268f6 which is
commit 967d1dc144b50ad005e5eecdfadfbcfb399ffff6 upstream.

It is not needed in the 4.4.y tree at this time.

Reported-by: Jan Kara 
Cc: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

Revert "loop: Get rid of loop_index_mutex"

2019-02-06T18:43:05+00:00

This reverts commit 611f77199cd763e6b7c0462c2f199ddb3a089750 which is
commit 0a42e99b58a208839626465af194cfe640ef9493 upstream.

It is not needed in the 4.4.y tree at this time.

Reported-by: Jan Kara 
Cc: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

Revert "loop: Fix double mutex_unlock(&loop_ctl_mutex) in loop_control_ioctl()"

2019-02-06T18:43:05+00:00

This reverts commit 9ec298cc874d08020f45791a8396e1593c3278c1 which is
commit 628bd85947091830a8c4872adfd5ed1d515a9cf2 upstream.

It is not needed in the 4.4.y tree at this point in time.

Reported-by: Jan Kara 
Cc: Ming Lei 
Cc: Jan Kara 
Cc: Tetsuo Handa 
Cc: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman