linux-stable.git/drivers/block, branch v4.19.288

xen/blkfront: Only check REQ_FUA for writes

2023-06-21T13:39:57+00:00

[ Upstream commit b6ebaa8100090092aa602530d7e8316816d0c98d ]

The existing code silently converts read operations with the
REQ_FUA bit set into write-barrier operations. This results in data
loss as the backend scribbles zeroes over the data instead of returning
it.

While the REQ_FUA bit doesn't make sense on a read operation, at least
one well-known out-of-tree kernel module does set it and since it
results in data loss, let's be safe here and only look at REQ_FUA for
writes.

Signed-off-by: Ross Lagerwall 
Acked-by: Juergen Gross 
Link: https://lore.kernel.org/r/20230426164005.2213139-1-ross.lagerwall@citrix.com
Signed-off-by: Juergen Gross 
Signed-off-by: Sasha Levin

nbd: Fix debugfs_create_dir error checking

2023-06-09T08:23:58+00:00

[ Upstream commit 4913cfcf014c95f0437db2df1734472fd3e15098 ]

The debugfs_create_dir function returns ERR_PTR in case of error, and the
only correct way to check if an error occurred is 'IS_ERR' inline function.
This patch will replace the null-comparison with IS_ERR.

Signed-off-by: Ivan Orlov 
Link: https://lore.kernel.org/r/20230512130533.98709-1-ivan.orlov0322@gmail.com
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

drbd: correctly submit flush bio on barrier

2023-05-17T09:13:28+00:00

commit 3899d94e3831ee07ea6821c032dc297aec80586a upstream.

When we receive a flush command (or "barrier" in DRBD), we currently use
a REQ_OP_FLUSH with the REQ_PREFLUSH flag set.

The correct way to submit a flush bio is by using a REQ_OP_WRITE without
any data, and set the REQ_PREFLUSH flag.

Since commit b4a6bb3a67aa ("block: add a sanity check for non-write
flush/fua bios"), this triggers a warning in the block layer, but this
has been broken for quite some time before that.

So use the correct set of flags to actually make the flush happen.

Cc: Christoph Hellwig 
Cc: stable@vger.kernel.org
Fixes: f9ff0da56437 ("drbd: allow parallel flushes for multi-volume resources")
Reported-by: Thomas Voegtle 
Signed-off-by: Christoph Böhmwalder 
Reviewed-by: Christoph Hellwig 
Link: https://lore.kernel.org/r/20230503121937.17232-1-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

block: sunvdc: add check for mdesc_grab() returning NULL

2023-03-22T12:27:09+00:00

[ Upstream commit 6030363199e3a6341afb467ddddbed56640cbf6a ]

In vdc_port_probe(), we should check the return value of mdesc_grab() as
it may return NULL, which can cause potential NPD bug.

Fixes: 43fdf27470b2 ("[SPARC64]: Abstract out mdesc accesses for better MD update handling.")
Signed-off-by: Liang He 
Link: https://lore.kernel.org/r/20230315062032.1741692-1-windhl@126.com
[axboe: style cleanup]
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

rbd: avoid use-after-free in do_rbd_add() when rbd_dev_create() fails

2023-03-11T15:31:53+00:00

commit f7c4d9b133c7a04ca619355574e96b6abf209fba upstream.

If getting an ID or setting up a work queue in rbd_dev_create() fails,
use-after-free on rbd_dev->rbd_client, rbd_dev->spec and rbd_dev->opts
is triggered in do_rbd_add().  The root cause is that the ownership of
these structures is transfered to rbd_dev prematurely and they all end
up getting freed when rbd_dev_create() calls rbd_dev_free() prior to
returning to do_rbd_add().

Found by Linux Verification Center (linuxtesting.org) with SVACE, an
incomplete patch submitted by Natalia Petrova .

Cc: stable@vger.kernel.org
Fixes: 1643dfa4c2c8 ("rbd: introduce a per-device ordered workqueue")
Signed-off-by: Ilya Dryomov 
Signed-off-by: Greg Kroah-Hartman

drbd: remove call to memset before free device/resource/connection

2023-01-18T10:30:13+00:00

[ Upstream commit 6e7b854e4c1b02dba00760dfa79d8dbf6cce561e ]

This revert c2258ffc56f2 ("drbd: poison free'd device, resource and
connection structs"), add memset is odd here for debugging, there are
some methods to accurately show what happened, such as kdump.

Signed-off-by: Wang ShaoBo 
Link: https://lore.kernel.org/r/20221124015817.2729789-2-bobo.shaobowang@huawei.com
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

drbd: use after free in drbd_create_device()

2022-11-25T16:40:24+00:00

[ Upstream commit a7a1598189228b5007369a9622ccdf587be0730f ]

The drbd_destroy_connection() frees the "connection" so use the _safe()
iterator to prevent a use after free.

Fixes: b6f85ef9538b ("drbd: Iterate over all connections")
Signed-off-by: Dan Carpenter 
Reviewed-by: Christoph Böhmwalder 
Link: https://lore.kernel.org/r/Y3Jd5iZRbNQ9w6gm@kili
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

nbd: Fix hung when signal interrupts nbd_start_device_ioctl()

2022-10-26T11:19:40+00:00

[ Upstream commit 1de7c3cf48fc41cd95adb12bd1ea9033a917798a ]

syzbot reported hung task [1].  The following program is a simplified
version of the reproducer:

int main(void)
{
	int sv[2], fd;

	if (socketpair(AF_UNIX, SOCK_STREAM, 0, sv) < 0)
		return 1;
	if ((fd = open("/dev/nbd0", 0)) < 0)
		return 1;
	if (ioctl(fd, NBD_SET_SIZE_BLOCKS, 0x81) < 0)
		return 1;
	if (ioctl(fd, NBD_SET_SOCK, sv[0]) < 0)
		return 1;
	if (ioctl(fd, NBD_DO_IT) < 0)
		return 1;
	return 0;
}

When signal interrupt nbd_start_device_ioctl() waiting the condition
atomic_read(&config->recv_threads) == 0, the task can hung because it
waits the completion of the inflight IOs.

This patch fixes the issue by clearing queue, not just shutdown, when
signal interrupt nbd_start_device_ioctl().

Link: https://syzkaller.appspot.com/bug?id=7d89a3ffacd2b83fdd39549bc4d8e0a89ef21239 [1]
Reported-by: syzbot+38e6c55d4969a14c1534@syzkaller.appspotmail.com
Signed-off-by: Shigeru Yoshida 
Reviewed-by: Josef Bacik 
Link: https://lore.kernel.org/r/20220907163502.577561-1-syoshida@redhat.com
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

loop: Check for overflow while configuring loop

2022-09-05T08:26:31+00:00

commit c490a0b5a4f36da3918181a8acdc6991d967c5f3 upstream.

The userspace can configure a loop using an ioctl call, wherein
a configuration of type loop_config is passed (see lo_ioctl()'s
case on line 1550 of drivers/block/loop.c). This proceeds to call
loop_configure() which in turn calls loop_set_status_from_info()
(see line 1050 of loop.c), passing &config->info which is of type
loop_info64*. This function then sets the appropriate values, like
the offset.

loop_device has lo_offset of type loff_t (see line 52 of loop.c),
which is typdef-chained to long long, whereas loop_info64 has
lo_offset of type __u64 (see line 56 of include/uapi/linux/loop.h).

The function directly copies offset from info to the device as
follows (See line 980 of loop.c):
	lo->lo_offset = info->lo_offset;

This results in an overflow, which triggers a warning in iomap_iter()
due to a call to iomap_iter_done() which has:
	WARN_ON_ONCE(iter->iomap.offset > iter->pos);

Thus, check for negative value during loop_set_status_from_info().

Bug report: https://syzkaller.appspot.com/bug?id=c620fe14aac810396d3c3edc9ad73848bf69a29e

Reported-and-tested-by: syzbot+a8e049cd3abd342936b6@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Wilcox (Oracle) 
Signed-off-by: Siddh Raman Pant 
Reviewed-by: Christoph Hellwig 
Link: https://lore.kernel.org/r/20220823160810.181275-1-code@siddh.me
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

null_blk: fix ida error handling in null_add_dev()

2022-08-25T09:15:19+00:00

[ Upstream commit ee452a8d984f94fa8e894f003a52e776e4572881 ]

There needs to be some error checking if ida_simple_get() fails.
Also call ida_free() if there are errors later.

Fixes: 94bc02e30fb8 ("nullb: use ida to manage index")
Signed-off-by: Dan Carpenter 
Link: https://lore.kernel.org/r/YtEhXsr6vJeoiYhd@kili
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin