linux-stable.git/drivers/block, branch v3.18.136

block/swim3: Fix -EBUSY error when re-opening device after unmount

2019-02-20T09:09:03+00:00

[ Upstream commit 296dcc40f2f2e402facf7cd26cf3f2c8f4b17d47 ]

When the block device is opened with FMODE_EXCL, ref_count is set to -1.
This value doesn't get reset when the device is closed which means the
device cannot be opened again. Fix this by checking for refcount <= 0
in the release method.

Reported-and-tested-by: Stan Johnson 
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Finn Thain 
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

drbd: skip spurious timeout (ping-timeo) when failing promote

2019-02-20T09:09:01+00:00

[ Upstream commit 9848b6ddd8c92305252f94592c5e278574e7a6ac ]

If you try to promote a Secondary while connected to a Primary
and allow-two-primaries is NOT set, we will wait for "ping-timeout"
to give this node a chance to detect a dead primary,
in case the cluster manager noticed faster than we did.

But if we then are *still* connected to a Primary,
we fail (after an additional timeout of ping-timout).

This change skips the spurious second timeout.

Most people won't notice really,
since "ping-timeout" by default is half a second.

But in some installations, ping-timeout may be 10 or 20 seconds or more,
and spuriously delaying the error return becomes annoying.

Signed-off-by: Lars Ellenberg 
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

drbd: disconnect, if the wrong UUIDs are attached on a connected peer

2019-02-20T09:09:00+00:00

[ Upstream commit b17b59602b6dcf8f97a7dc7bc489a48388d7063a ]

With "on-no-data-accessible suspend-io", DRBD requires the next attach
or connect to be to the very same data generation uuid tag it lost last.

If we first lost connection to the peer,
then later lost connection to our own disk,
we would usually refuse to re-connect to the peer,
because it presents the wrong data set.

However, if the peer first connects without a disk,
and then attached its disk, we accepted that same wrong data set,
which would be "unexpected" by any user of that DRBD
and cause "undefined results" (read: very likely data corruption).

The fix is to forcefully disconnect as soon as we notice that the peer
attached to the "wrong" dataset.

Signed-off-by: Lars Ellenberg 
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

drbd: narrow rcu_read_lock in drbd_sync_handshake

2019-02-20T09:09:00+00:00

[ Upstream commit d29e89e34952a9ad02c77109c71a80043544296e ]

So far there was the possibility that we called
genlmsg_new(GFP_NOIO)/mutex_lock() while holding an rcu_read_lock().

This included cases like:

drbd_sync_handshake (acquire the RCU lock)
  drbd_asb_recover_1p
    drbd_khelper
      drbd_bcast_event
        genlmsg_new(GFP_NOIO) --> may sleep

drbd_sync_handshake (acquire the RCU lock)
  drbd_asb_recover_1p
    drbd_khelper
      notify_helper
        genlmsg_new(GFP_NOIO) --> may sleep

drbd_sync_handshake (acquire the RCU lock)
  drbd_asb_recover_1p
    drbd_khelper
      notify_helper
        mutex_lock --> may sleep

While using GFP_ATOMIC whould have been possible in the first two cases,
the real fix is to narrow the rcu_read_lock.

Reported-by: Jia-Ju Bai 
Reviewed-by: Lars Ellenberg 
Signed-off-by: Roland Kammerer 
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

block/loop: Use global lock for ioctl() operation.

2019-01-26T08:44:26+00:00

commit 310ca162d779efee8a2dc3731439680f3e9c1e86 upstream.

syzbot is reporting NULL pointer dereference [1] which is caused by
race condition between ioctl(loop_fd, LOOP_CLR_FD, 0) versus
ioctl(other_loop_fd, LOOP_SET_FD, loop_fd) due to traversing other
loop devices at loop_validate_file() without holding corresponding
lo->lo_ctl_mutex locks.

Since ioctl() request on loop devices is not frequent operation, we don't
need fine grained locking. Let's use global lock in order to allow safe
traversal at loop_validate_file().

Note that syzbot is also reporting circular locking dependency between
bdev->bd_mutex and lo->lo_ctl_mutex [2] which is caused by calling
blkdev_reread_part() with lock held. This patch does not address it.

[1] https://syzkaller.appspot.com/bug?id=f3cfe26e785d85f9ee259f385515291d21bd80a3
[2] https://syzkaller.appspot.com/bug?id=bf154052f0eea4bc7712499e4569505907d15889

Signed-off-by: Tetsuo Handa 
Reported-by: syzbot 
Reviewed-by: Jan Kara 
Signed-off-by: Jan Kara 
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

zram: close udev startup race condition as default groups

2018-11-27T15:05:37+00:00

commit fef912bf860e upstream.
commit 98af4d4df889 upstream.

I got a report from Howard Chen that he saw zram and sysfs race(ie,
zram block device file is created but sysfs for it isn't yet)
when he tried to create new zram devices via hotadd knob.

v4.20 kernel fixes it by [1, 2] but it's too large size to merge
into -stable so this patch fixes the problem by registering defualt
group by Greg KH's approach[3].

This patch should be applied to every stable tree [3.16+] currently
existing from kernel.org because the problem was introduced at 2.6.37
by [4].

[1] fef912bf860e, block: genhd: add 'groups' argument to device_add_disk
[2] 98af4d4df889, zram: register default groups with device_add_disk()
[3] http://kroah.com/log/blog/2013/06/26/how-to-create-a-sysfs-file-correctly/
[4] 33863c21e69e9, Staging: zram: Replace ioctls with sysfs interface

Cc: Sergey Senozhatsky 
Cc: Hannes Reinecke 
Tested-by: Howard Chen 
Signed-off-by: Minchan Kim 
Signed-off-by: Sasha Levin

swim: fix cleanup on setup error

2018-11-22T06:32:42+00:00

[ Upstream commit 1448a2a5360ae06f25e2edc61ae070dff5c0beb4 ]

If we fail to allocate the request queue for a disk, we still need to
free that disk, not just the previous ones. Additionally, we need to
cleanup the previous request queues.

Signed-off-by: Omar Sandoval 
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ataflop: fix error handling during setup

2018-11-22T06:32:41+00:00

[ Upstream commit 71327f547ee3a46ec5c39fdbbd268401b2578d0e ]

Move queue allocation next to disk allocation to fix a couple of issues:

- If add_disk() hasn't been called, we should clear disk->queue before
  calling put_disk().
- If we fail to allocate a request queue, we still need to put all of
  the disks, not just the ones that we allocated queues for.

Signed-off-by: Omar Sandoval 
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

floppy: Do not copy a kernel pointer to user memory in FDGETPRM ioctl

2018-10-13T07:09:27+00:00

commit 65eea8edc315589d6c993cf12dbb5d0e9ef1fe4e upstream.

The final field of a floppy_struct is the field "name", which is a pointer
to a string in kernel memory.  The kernel pointer should not be copied to
user memory.  The FDGETPRM ioctl copies a floppy_struct to user memory,
including this "name" field.  This pointer cannot be used by the user
and it will leak a kernel address to user-space, which will reveal the
location of kernel code and data and undermine KASLR protection.

Model this code after the compat ioctl which copies the returned data
to a previously cleared temporary structure on the stack (excluding the
name pointer) and copy out to userspace from there.  As we already have
an inparam union with an appropriate member and that memory is already
cleared even for read only calls make use of that as a temporary store.

Based on an initial patch by Brian Belleville.

CVE-2018-7755
Signed-off-by: Andy Whitcroft 
Broke up long line.
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

loop: remember whether sysfs_create_group() was done

2018-07-22T11:43:24+00:00

commit d3349b6b3c373ac1fbfb040b810fcee5e2adc7e0 upstream.

syzbot is hitting WARN() triggered by memory allocation fault
injection [1] because loop module is calling sysfs_remove_group()
when sysfs_create_group() failed.
Fix this by remembering whether sysfs_create_group() succeeded.

[1] https://syzkaller.appspot.com/bug?id=3f86c0edf75c86d2633aeb9dd69eccc70bc7e90b

Signed-off-by: Tetsuo Handa 
Reported-by: syzbot 
Reviewed-by: Greg Kroah-Hartman 

Renamed sysfs_ready -> sysfs_inited.

Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman