linux-stable.git/drivers/block, branch linux-5.8.y

loop: Set correct device size when using LOOP_CONFIGURE

2020-09-23T10:59:49+00:00

commit 79e5dc59e2974a48764269fa9ff544ae8ffe3338 upstream.

The device size calculation was done before processing the loop
configuration, which meant that the we set the size on the underlying
block device incorrectly in case lo_offset/lo_sizelimit were set in the
configuration. Delay computing the size until we've setup the device
parameters correctly.

Fixes: 3448914e8cc5("loop: Add LOOP_CONFIGURE ioctl")
Reported-by: Lennart Poettering 
Tested-by: Yang Xu 
Signed-off-by: Martijn Coenen 
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

rbd: require global CAP_SYS_ADMIN for mapping and unmapping

2020-09-17T11:55:43+00:00

commit f44d04e696feaf13d192d942c4f14ad2e117065a upstream.

It turns out that currently we rely only on sysfs attribute
permissions:

  $ ll /sys/bus/rbd/{add*,remove*}
  --w------- 1 root root 4096 Sep  3 20:37 /sys/bus/rbd/add
  --w------- 1 root root 4096 Sep  3 20:37 /sys/bus/rbd/add_single_major
  --w------- 1 root root 4096 Sep  3 20:37 /sys/bus/rbd/remove
  --w------- 1 root root 4096 Sep  3 20:38 /sys/bus/rbd/remove_single_major

This means that images can be mapped and unmapped (i.e. block devices
can be created and deleted) by a UID 0 process even after it drops all
privileges or by any process with CAP_DAC_OVERRIDE in its user namespace
as long as UID 0 is mapped into that user namespace.

Be consistent with other virtual block devices (loop, nbd, dm, md, etc)
and require CAP_SYS_ADMIN in the initial user namespace for mapping and
unmapping, and also for dumping the configuration string and refreshing
the image header.

Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov 
Reviewed-by: Jeff Layton 
Signed-off-by: Greg Kroah-Hartman

nbd: restore default timeout when setting it to zero

2020-09-09T17:14:10+00:00

[ Upstream commit acb19e17c5134dd78668c429ecba5b481f038e6a ]

If we configured io timeout of nbd0 to 100s. Later after we
finished using it, we configured nbd0 again and set the io
timeout to 0. We expect it would timeout after 30 seconds
and keep retry. But in fact we could not change the timeout
when we set it to 0. the timeout is still the original 100s.

So change the timeout to default 30s when we set it to zero.
It also behaves same as commit 2da22da57348 ("nbd: fix zero
cmd timeout handling v2").

It becomes more important if we were reconfigure a nbd device
and the io timeout it set to zero. Because it could take 30s
to detect the new socket and thus io could be completed more
quickly compared to 100s.

Signed-off-by: Hou Pu 
Reviewed-by: Josef Bacik 
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

block: loop: set discard granularity and alignment for block device backed loop

2020-09-03T09:29:39+00:00

commit bcb21c8cc9947286211327d663ace69f07d37a76 upstream.

In case of block device backend, if the backend supports write zeros, the
loop device will set queue flag of QUEUE_FLAG_DISCARD. However,
limits.discard_granularity isn't setup, and this way is wrong,
see the following description in Documentation/ABI/testing/sysfs-block:

	A discard_granularity of 0 means that the device does not support
	discard functionality.

Especially 9b15d109a6b2 ("block: improve discard bio alignment in
__blkdev_issue_discard()") starts to take q->limits.discard_granularity
for computing max discard sectors. And zero discard granularity may cause
kernel oops, or fail discard request even though the loop queue claims
discard support via QUEUE_FLAG_DISCARD.

Fix the issue by setup discard granularity and alignment.

Fixes: c52abf563049 ("loop: Better discard support for block devices")
Signed-off-by: Ming Lei 
Reviewed-by: Christoph Hellwig 
Acked-by: Coly Li 
Cc: Hannes Reinecke 
Cc: Xiao Ni 
Cc: Martin K. Petersen 
Cc: Evan Green 
Cc: Gwendal Grignou 
Cc: Chaitanya Kulkarni 
Cc: Andrzej Pietrasiewicz 
Cc: Christoph Hellwig 
Cc: 
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

null_blk: fix passing of REQ_FUA flag in null_handle_rq

2020-09-03T09:29:28+00:00

[ Upstream commit 2d62e6b038e729c3e4bfbfcfbd44800ef0883680 ]

REQ_FUA should be checked using rq->cmd_flags instead of req_op().

Fixes: deb78b419dfda ("nullb: emulate cache")
Signed-off-by: Hou Pu 
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

block: virtio_blk: fix handling single range discard request

2020-09-03T09:29:26+00:00

[ Upstream commit af822aa68fbdf0a480a17462ed70232998127453 ]

1f23816b8eb8 ("virtio_blk: add discard and write zeroes support") starts
to support multi-range discard for virtio-blk. However, the virtio-blk
disk may report max discard segment as 1, at least that is exactly what
qemu is doing.

So far, block layer switches to normal request merge if max discard segment
limit is 1, and multiple bios can be merged to single segment. This way may
cause memory corruption in virtblk_setup_discard_write_zeroes().

Fix the issue by handling single max discard segment in straightforward
way.

Fixes: 1f23816b8eb8 ("virtio_blk: add discard and write zeroes support")
Signed-off-by: Ming Lei 
Reviewed-by: Christoph Hellwig 
Cc: Changpeng Liu 
Cc: Daniel Verkamp 
Cc: Michael S. Tsirkin 
Cc: Stefan Hajnoczi 
Cc: Stefano Garzarella 
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

loop: be paranoid on exit and prevent new additions / removals

2020-08-19T06:26:15+00:00

[ Upstream commit 200f93377220504c5e56754823e7adfea6037f1a ]

Be pedantic on removal as well and hold the mutex.
This should prevent uses of addition while we exit.

Signed-off-by: Luis Chamberlain 
Reviewed-by: Ming Lei 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

Merge tag 'char-misc-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc into master

2020-07-16T18:26:40+00:00

Pull char/misc fixes from Greg KH:
 "Here are number of small char/misc driver fixes for 5.8-rc6

  Not that many complex fixes here, just a number of small fixes for
  reported issues, and some new device ids. Nothing fancy.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
  virtio: virtio_console: add missing MODULE_DEVICE_TABLE() for rproc serial
  intel_th: Fix a NULL dereference when hub driver is not loaded
  intel_th: pci: Add Emmitsburg PCH support
  intel_th: pci: Add Tiger Lake PCH-H support
  intel_th: pci: Add Jasper Lake CPU support
  virt: vbox: Fix guest capabilities mask check
  virt: vbox: Fix VBGL_IOCTL_VMMDEV_REQUEST_BIG and _LOG req numbers to match upstream
  uio_pdrv_genirq: fix use without device tree and no interrupt
  uio_pdrv_genirq: Remove warning when irq is not specified
  coresight: etmv4: Fix CPU power management setup in probe() function
  coresight: cti: Fix error handling in probe
  Revert "zram: convert remaining CLASS_ATTR() to CLASS_ATTR_RO()"
  mei: bus: don't clean driver pointer
  misc: atmel-ssc: lock with mutex instead of spinlock
  phy: sun4i-usb: fix dereference of pointer phy0 before it is null checked
  phy: rockchip: Fix return value of inno_dsidphy_probe()
  phy: ti: j721e-wiz: Constify structs
  phy: ti: am654-serdes: Constify regmap_config
  phy: intel: fix enum type mismatch warning
  phy: intel: Fix compilation error on FIELD_PREP usage
  ...

Merge tag 'block-5.8-2020-07-10' of git://git.kernel.dk/linux-block

2020-07-10T16:55:46+00:00

Pull block fixes from Jens Axboe:

 - Fix for inflight accounting, which affects only dm (Ming)

 - Fix documentation error for bfq (Yufen)

 - Fix memory leak for nbd (Zheng)

* tag 'block-5.8-2020-07-10' of git://git.kernel.dk/linux-block:
  nbd: Fix memory leak in nbd_add_socket
  blk-mq: consider non-idle request as "inflight" in blk_mq_rq_inflight()
  docs: block: update and fix tiny error for bfq

nbd: Fix memory leak in nbd_add_socket

2020-07-08T21:42:18+00:00

When adding first socket to nbd, if nsock's allocation failed, the data
structure member "config->socks" was reallocated, but the data structure
member "config->num_connections" was not updated. A memory leak will occur
then because the function "nbd_config_put" will free "config->socks" only
when "config->num_connections" is not zero.

Fixes: 03bf73c315ed ("nbd: prevent memory leak")
Reported-by: syzbot+934037347002901b8d2a@syzkaller.appspotmail.com
Signed-off-by: Zheng Bin 
Reviewed-by: Eric Biggers 
Signed-off-by: Jens Axboe