linux-stable.git/drivers/block, branch linux-5.17.y

block, loop: support partitions without scanning

2022-06-14T16:41:52+00:00

commit b9684a71fca793213378dd410cd11675d973eaa1 upstream.

Historically we did distinguish between a flag that surpressed partition
scanning, and a combinations of the minors variable and another flag if
any partitions were supported.  This was generally confusing and doesn't
make much sense, but some corner case uses of the loop driver actually
do want to support manually added partitions on a device that does not
actively scan for partitions.  To make things worsee the loop driver
also wants to dynamically toggle the scanning for partitions on a live
gendisk, which makes the disk->flags updates non-atomic.

Introduce a new GD_SUPPRESS_PART_SCAN bit in disk->state that disables
just scanning for partitions, and toggle that instead of GENHD_FL_NO_PART
in the loop driver.

Fixes: 1ebe2e5f9d68 ("block: remove GENHD_FL_EXT_DEVT")
Reported-by: Ming Lei 
Signed-off-by: Christoph Hellwig 
Reviewed-by: Ming Lei 
Link: https://lore.kernel.org/r/20220527055806.1972352-1-hch@lst.de
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

nbd: fix io hung while disconnecting device

2022-06-14T16:41:40+00:00

[ Upstream commit 09dadb5985023e27d4740ebd17e6fea4640110e5 ]

In our tests, "qemu-nbd" triggers a io hung:

INFO: task qemu-nbd:11445 blocked for more than 368 seconds.
      Not tainted 5.18.0-rc3-next-20220422-00003-g2176915513ca #884
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:qemu-nbd        state:D stack:    0 pid:11445 ppid:     1 flags:0x00000000
Call Trace:
 
 __schedule+0x480/0x1050
 ? _raw_spin_lock_irqsave+0x3e/0xb0
 schedule+0x9c/0x1b0
 blk_mq_freeze_queue_wait+0x9d/0xf0
 ? ipi_rseq+0x70/0x70
 blk_mq_freeze_queue+0x2b/0x40
 nbd_add_socket+0x6b/0x270 [nbd]
 nbd_ioctl+0x383/0x510 [nbd]
 blkdev_ioctl+0x18e/0x3e0
 __x64_sys_ioctl+0xac/0x120
 do_syscall_64+0x35/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fd8ff706577
RSP: 002b:00007fd8fcdfebf8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000040000000 RCX: 00007fd8ff706577
RDX: 000000000000000d RSI: 000000000000ab00 RDI: 000000000000000f
RBP: 000000000000000f R08: 000000000000fbe8 R09: 000055fe497c62b0
R10: 00000002aff20000 R11: 0000000000000246 R12: 000000000000006d
R13: 0000000000000000 R14: 00007ffe82dc5e70 R15: 00007fd8fcdff9c0

"qemu-ndb -d" will call ioctl 'NBD_DISCONNECT' first, however, following
message was found:

block nbd0: Send disconnect failed -32

Which indicate that something is wrong with the server. Then,
"qemu-nbd -d" will call ioctl 'NBD_CLEAR_SOCK', however ioctl can't clear
requests after commit 2516ab1543fd("nbd: only clear the queue on device
teardown"). And in the meantime, request can't complete through timeout
because nbd_xmit_timeout() will always return 'BLK_EH_RESET_TIMER', which
means such request will never be completed in this situation.

Now that the flag 'NBD_CMD_INFLIGHT' can make sure requests won't
complete multiple times, switch back to call nbd_clear_sock() in
nbd_clear_sock_ioctl(), so that inflight requests can be cleared.

Signed-off-by: Yu Kuai 
Reviewed-by: Josef Bacik 
Link: https://lore.kernel.org/r/20220521073749.3146892-5-yukuai3@huawei.com
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

nbd: fix race between nbd_alloc_config() and module removal

2022-06-14T16:41:40+00:00

[ Upstream commit c55b2b983b0fa012942c3eb16384b2b722caa810 ]

When nbd module is being removing, nbd_alloc_config() may be
called concurrently by nbd_genl_connect(), although try_module_get()
will return false, but nbd_alloc_config() doesn't handle it.

The race may lead to the leak of nbd_config and its related
resources (e.g, recv_workq) and oops in nbd_read_stat() due
to the unload of nbd module as shown below:

  BUG: kernel NULL pointer dereference, address: 0000000000000040
  Oops: 0000 [#1] SMP PTI
  CPU: 5 PID: 13840 Comm: kworker/u17:33 Not tainted 5.14.0+ #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
  Workqueue: knbd16-recv recv_work [nbd]
  RIP: 0010:nbd_read_stat.cold+0x130/0x1a4 [nbd]
  Call Trace:
   recv_work+0x3b/0xb0 [nbd]
   process_one_work+0x1ed/0x390
   worker_thread+0x4a/0x3d0
   kthread+0x12a/0x150
   ret_from_fork+0x22/0x30

Fixing it by checking the return value of try_module_get()
in nbd_alloc_config(). As nbd_alloc_config() may return ERR_PTR(-ENODEV),
assign nbd->config only when nbd_alloc_config() succeeds to ensure
the value of nbd->config is binary (valid or NULL).

Also adding a debug message to check the reference counter
of nbd_config during module removal.

Signed-off-by: Hou Tao 
Signed-off-by: Yu Kuai 
Reviewed-by: Josef Bacik 
Link: https://lore.kernel.org/r/20220521073749.3146892-3-yukuai3@huawei.com
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

nbd: call genl_unregister_family() first in nbd_cleanup()

2022-06-14T16:41:39+00:00

[ Upstream commit 06c4da89c24e7023ea448cadf8e9daf06a0aae6e ]

Otherwise there may be race between module removal and the handling of
netlink command, which can lead to the oops as shown below:

  BUG: kernel NULL pointer dereference, address: 0000000000000098
  Oops: 0002 [#1] SMP PTI
  CPU: 1 PID: 31299 Comm: nbd-client Tainted: G            E     5.14.0-rc4
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
  RIP: 0010:down_write+0x1a/0x50
  Call Trace:
   start_creating+0x89/0x130
   debugfs_create_dir+0x1b/0x130
   nbd_start_device+0x13d/0x390 [nbd]
   nbd_genl_connect+0x42f/0x748 [nbd]
   genl_family_rcv_msg_doit.isra.0+0xec/0x150
   genl_rcv_msg+0xe5/0x1e0
   netlink_rcv_skb+0x55/0x100
   genl_rcv+0x29/0x40
   netlink_unicast+0x1a8/0x250
   netlink_sendmsg+0x21b/0x430
   ____sys_sendmsg+0x2a4/0x2d0
   ___sys_sendmsg+0x81/0xc0
   __sys_sendmsg+0x62/0xb0
   __x64_sys_sendmsg+0x1f/0x30
   do_syscall_64+0x3b/0xc0
   entry_SYSCALL_64_after_hwframe+0x44/0xae
  Modules linked in: nbd(E-)

Signed-off-by: Hou Tao 
Signed-off-by: Yu Kuai 
Reviewed-by: Josef Bacik 
Link: https://lore.kernel.org/r/20220521073749.3146892-2-yukuai3@huawei.com
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

nbd: don't clear 'NBD_CMD_INFLIGHT' flag if request is not completed

2022-06-14T16:41:22+00:00

[ Upstream commit 2895f1831e911ca87d4efdf43e35eb72a0c7e66e ]

Otherwise io will hung because request will only be completed if the
cmd has the flag 'NBD_CMD_INFLIGHT'.

Fixes: 07175cb1baf4 ("nbd: make sure request completion won't concurrent")
Signed-off-by: Yu Kuai 
Link: https://lore.kernel.org/r/20220521073749.3146892-4-yukuai3@huawei.com
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

virtio_blk: fix the discard_granularity and discard_alignment queue limits

2022-06-09T08:25:46+00:00

[ Upstream commit 62952cc5bccd89b76d710de1d0b43244af0f2903 ]

The discard_alignment queue limit is named a bit misleading means the
offset into the block device at which the discard granularity starts.

On the other hand the discard_sector_alignment from the virtio 1.1 looks
similar to what Linux uses as discard granularity (even if not very well
described):

  "discard_sector_alignment can be used by OS when splitting a request
   based on alignment. "

And at least qemu does set it to the discard granularity.

So stop setting the discard_alignment and use the virtio
discard_sector_alignment to set the discard granularity.

Fixes: 1f23816b8eb8 ("virtio_blk: add discard and write zeroes support")
Signed-off-by: Christoph Hellwig 
Reviewed-by: Martin K. Petersen 
Link: https://lore.kernel.org/r/20220418045314.360785-5-hch@lst.de
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

drbd: fix duplicate array initializer

2022-06-09T08:25:40+00:00

[ Upstream commit 33cb0917bbe241dd17a2b87ead63514c1b7e5615 ]

There are two initializers for P_RETRY_WRITE:

drivers/block/drbd/drbd_main.c:3676:22: warning: initialized field overwritten [-Woverride-init]

Remove the first one since it was already ignored by the compiler
and reorder the list to match the enum definition. As P_ZEROES had
no entry, add that one instead.

Fixes: 036b17eaab93 ("drbd: Receiving part for the PROTOCOL_UPDATE packet")
Fixes: f31e583aa2c2 ("drbd: introduce P_ZEROES (REQ_OP_WRITE_ZEROES on the "wire")")
Signed-off-by: Arnd Bergmann 
Reviewed-by: Christoph Böhmwalder 
Link: https://lore.kernel.org/r/20220406190715.1938174-2-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

nbd: Fix hung on disconnect request if socket is closed before

2022-06-09T08:25:28+00:00

[ Upstream commit 491bf8f236fdeec698fa6744993f1ecf3fafd1a5 ]

When userspace closes the socket before sending a disconnect
request, the following I/O requests will be blocked in
wait_for_reconnect() until dead timeout. This will cause the
following disconnect request also hung on blk_mq_quiesce_queue().
That means we have no way to disconnect a nbd device if there
are some I/O requests waiting for reconnecting until dead timeout.
It's not expected. So let's wake up the thread waiting for
reconnecting directly when a disconnect request is sent.

Reported-by: Xu Jianhai 
Signed-off-by: Xie Yongji 
Reviewed-by: Josef Bacik 
Link: https://lore.kernel.org/r/20220322080639.142-1-xieyongji@bytedance.com
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

drbd: remove usage of list iterator variable after loop

2022-05-25T07:59:01+00:00

[ Upstream commit 901aeda62efa21f2eae937bccb71b49ae531be06 ]

In preparation to limit the scope of a list iterator to the list
traversal loop, use a dedicated pointer to iterate through the list [1].

Since that variable should not be used past the loop iteration, a
separate variable is used to 'remember the current location within the
loop'.

To either continue iterating from that position or skip the iteration
(if the previous iteration was complete) list_prepare_entry() is used.

Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1]
Signed-off-by: Jakob Koschel 
Link: https://lore.kernel.org/r/20220331220349.885126-1-jakobkoschel@gmail.com
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

floppy: use a statically allocated error counter

2022-05-25T07:58:56+00:00

commit f71f01394f742fc4558b3f9f4c7ef4c4cf3b07c8 upstream.

Interrupt handler bad_flp_intr() may cause a UAF on the recently freed
request just to increment the error count.  There's no point keeping
that one in the request anyway, and since the interrupt handler uses a
static pointer to the error which cannot be kept in sync with the
pending request, better make it use a static error counter that's reset
for each new request.  This reset now happens when entering
redo_fd_request() for a new request via set_next_request().

One initial concern about a single error counter was that errors on one
floppy drive could be reported on another one, but this problem is not
real given that the driver uses a single drive at a time, as that
PC-compatible controllers also have this limitation by using shared
signals.  As such the error count is always for the "current" drive.

Reported-by: Minh Yuan 
Suggested-by: Linus Torvalds 
Tested-by: Denis Efremov 
Signed-off-by: Willy Tarreau 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman