linux-stable.git/drivers/block, branch linux-4.9.y Linux kernel stable tree loop: Check for overflow while configuring loop 2022-09-05T08:23:56+00:00 Siddh Raman Pant code@siddh.me 2022-08-23T16:08:10+00:00 18e28817cb516b39de6281f6db9b0618b2cc7b42 commit c490a0b5a4f36da3918181a8acdc6991d967c5f3 upstream. The userspace can configure a loop using an ioctl call, wherein a configuration of type loop_config is passed (see lo_ioctl()'s case on line 1550 of drivers/block/loop.c). This proceeds to call loop_configure() which in turn calls loop_set_status_from_info() (see line 1050 of loop.c), passing &config->info which is of type loop_info64*. This function then sets the appropriate values, like the offset. loop_device has lo_offset of type loff_t (see line 52 of loop.c), which is typdef-chained to long long, whereas loop_info64 has lo_offset of type __u64 (see line 56 of include/uapi/linux/loop.h). The function directly copies offset from info to the device as follows (See line 980 of loop.c): lo->lo_offset = info->lo_offset; This results in an overflow, which triggers a warning in iomap_iter() due to a call to iomap_iter_done() which has: WARN_ON_ONCE(iter->iomap.offset > iter->pos); Thus, check for negative value during loop_set_status_from_info(). Bug report: https://syzkaller.appspot.com/bug?id=c620fe14aac810396d3c3edc9ad73848bf69a29e Reported-and-tested-by: syzbot+a8e049cd3abd342936b6@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Siddh Raman Pant <code@siddh.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220823160810.181275-1-code@siddh.me Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c490a0b5a4f36da3918181a8acdc6991d967c5f3 upstream.

The userspace can configure a loop using an ioctl call, wherein
a configuration of type loop_config is passed (see lo_ioctl()'s
case on line 1550 of drivers/block/loop.c). This proceeds to call
loop_configure() which in turn calls loop_set_status_from_info()
(see line 1050 of loop.c), passing &config->info which is of type
loop_info64*. This function then sets the appropriate values, like
the offset.

loop_device has lo_offset of type loff_t (see line 52 of loop.c),
which is typdef-chained to long long, whereas loop_info64 has
lo_offset of type __u64 (see line 56 of include/uapi/linux/loop.h).

The function directly copies offset from info to the device as
follows (See line 980 of loop.c):
	lo->lo_offset = info->lo_offset;

This results in an overflow, which triggers a warning in iomap_iter()
due to a call to iomap_iter_done() which has:
	WARN_ON_ONCE(iter->iomap.offset > iter->pos);

Thus, check for negative value during loop_set_status_from_info().

Bug report: https://syzkaller.appspot.com/bug?id=c620fe14aac810396d3c3edc9ad73848bf69a29e

Reported-and-tested-by: syzbot+a8e049cd3abd342936b6@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Siddh Raman Pant <code@siddh.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220823160810.181275-1-code@siddh.me
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xen/blkfront: force data bouncing when backend is untrusted 2022-07-07T15:30:11+00:00 Roger Pau Monne roger.pau@citrix.com 2022-04-07T11:04:24+00:00 8dad9a67100245295373523375610be850999b37 commit 2400617da7eebf9167d71a46122828bc479d64c9 upstream. Split the current bounce buffering logic used with persistent grants into it's own option, and allow enabling it independently of persistent grants. This allows to reuse the same code paths to perform the bounce buffering required to avoid leaking contiguous data in shared pages not part of the request fragments. Reporting whether the backend is to be trusted can be done using a module parameter, or from the xenstore frontend path as set by the toolstack when adding the device. This is CVE-2022-33742, part of XSA-403. Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 2400617da7eebf9167d71a46122828bc479d64c9 upstream.

Split the current bounce buffering logic used with persistent grants
into it's own option, and allow enabling it independently of
persistent grants.  This allows to reuse the same code paths to
perform the bounce buffering required to avoid leaking contiguous data
in shared pages not part of the request fragments.

Reporting whether the backend is to be trusted can be done using a
module parameter, or from the xenstore frontend path as set by the
toolstack when adding the device.

This is CVE-2022-33742, part of XSA-403.

Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xen/blkfront: fix leaking data in shared pages 2022-07-07T15:30:11+00:00 Roger Pau Monne roger.pau@citrix.com 2022-03-30T07:03:48+00:00 4fbda9d1fc771b44e96ee4cea58f37d926010ffc commit 2f446ffe9d737e9a844b97887919c4fda18246e7 upstream. When allocating pages to be used for shared communication with the backend always zero them, this avoids leaking unintended data present on the pages. This is CVE-2022-26365, part of XSA-403. Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 2f446ffe9d737e9a844b97887919c4fda18246e7 upstream.

When allocating pages to be used for shared communication with the
backend always zero them, this avoids leaking unintended data present
on the pages.

This is CVE-2022-26365, part of XSA-403.

Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drbd: remove usage of list iterator variable after loop 2022-05-25T06:39:48+00:00 Jakob Koschel jakobkoschel@gmail.com 2022-03-31T22:03:48+00:00 5d0e7ff8a1a54a588620f41030cdaf481735cc48 [ Upstream commit 901aeda62efa21f2eae937bccb71b49ae531be06 ] In preparation to limit the scope of a list iterator to the list traversal loop, use a dedicated pointer to iterate through the list [1]. Since that variable should not be used past the loop iteration, a separate variable is used to 'remember the current location within the loop'. To either continue iterating from that position or skip the iteration (if the previous iteration was complete) list_prepare_entry() is used. Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1] Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com> Link: https://lore.kernel.org/r/20220331220349.885126-1-jakobkoschel@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 901aeda62efa21f2eae937bccb71b49ae531be06 ]

In preparation to limit the scope of a list iterator to the list
traversal loop, use a dedicated pointer to iterate through the list [1].

Since that variable should not be used past the loop iteration, a
separate variable is used to 'remember the current location within the
loop'.

To either continue iterating from that position or skip the iteration
(if the previous iteration was complete) list_prepare_entry() is used.

Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1]
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20220331220349.885126-1-jakobkoschel@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
floppy: use a statically allocated error counter 2022-05-25T06:39:47+00:00 Willy Tarreau w@1wt.eu 2022-05-08T09:37:07+00:00 2adafe1c646b462c755e99216f966927eec96059 commit f71f01394f742fc4558b3f9f4c7ef4c4cf3b07c8 upstream. Interrupt handler bad_flp_intr() may cause a UAF on the recently freed request just to increment the error count. There's no point keeping that one in the request anyway, and since the interrupt handler uses a static pointer to the error which cannot be kept in sync with the pending request, better make it use a static error counter that's reset for each new request. This reset now happens when entering redo_fd_request() for a new request via set_next_request(). One initial concern about a single error counter was that errors on one floppy drive could be reported on another one, but this problem is not real given that the driver uses a single drive at a time, as that PC-compatible controllers also have this limitation by using shared signals. As such the error count is always for the "current" drive. Reported-by: Minh Yuan <yuanmingbuaa@gmail.com> Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org> Tested-by: Denis Efremov <efremov@linux.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f71f01394f742fc4558b3f9f4c7ef4c4cf3b07c8 upstream.

Interrupt handler bad_flp_intr() may cause a UAF on the recently freed
request just to increment the error count.  There's no point keeping
that one in the request anyway, and since the interrupt handler uses a
static pointer to the error which cannot be kept in sync with the
pending request, better make it use a static error counter that's reset
for each new request.  This reset now happens when entering
redo_fd_request() for a new request via set_next_request().

One initial concern about a single error counter was that errors on one
floppy drive could be reported on another one, but this problem is not
real given that the driver uses a single drive at a time, as that
PC-compatible controllers also have this limitation by using shared
signals.  As such the error count is always for the "current" drive.

Reported-by: Minh Yuan <yuanmingbuaa@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Tested-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
block: drbd: drbd_nl: Make conversion to 'enum drbd_ret_code' explicit 2022-05-15T17:39:17+00:00 Lee Jones lee.jones@linaro.org 2021-03-12T10:55:26+00:00 8532c1d872c1f39edfe7a46a12d0b0511e4c7ed4 commit 1f1e87b4dc4598eac57a69868534b92d65e47e82 upstream. Fixes the following W=1 kernel build warning(s): from drivers/block/drbd/drbd_nl.c:24: drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_set_role’: drivers/block/drbd/drbd_nl.c:793:11: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion] drivers/block/drbd/drbd_nl.c:795:11: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion] drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_attach’: drivers/block/drbd/drbd_nl.c:1965:10: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion] drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_connect’: drivers/block/drbd/drbd_nl.c:2690:10: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion] drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_disconnect’: drivers/block/drbd/drbd_nl.c:2803:11: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion] Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: drbd-dev@lists.linbit.com Cc: linux-block@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210312105530.2219008-8-lee.jones@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Cc: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1f1e87b4dc4598eac57a69868534b92d65e47e82 upstream.

Fixes the following W=1 kernel build warning(s):

 from drivers/block/drbd/drbd_nl.c:24:
 drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_set_role’:
 drivers/block/drbd/drbd_nl.c:793:11: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion]
 drivers/block/drbd/drbd_nl.c:795:11: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion]
 drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_attach’:
 drivers/block/drbd/drbd_nl.c:1965:10: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion]
 drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_connect’:
 drivers/block/drbd/drbd_nl.c:2690:10: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion]
 drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_disconnect’:
 drivers/block/drbd/drbd_nl.c:2803:11: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion]

Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: drbd-dev@lists.linbit.com
Cc: linux-block@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210312105530.2219008-8-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
floppy: disable FDRAWCMD by default 2022-05-12T10:14:53+00:00 Willy Tarreau w@1wt.eu 2022-04-26T20:41:05+00:00 0dd02ff72c6daf4e7800fb5dd1109fbacdde97dc commit 233087ca063686964a53c829d547c7571e3f67bf upstream. Minh Yuan reported a concurrency use-after-free issue in the floppy code between raw_cmd_ioctl and seek_interrupt. [ It turns out this has been around, and that others have reported the KASAN splats over the years, but Minh Yuan had a reproducer for it and so gets primary credit for reporting it for this fix - Linus ] The problem is, this driver tends to break very easily and nowadays, nobody is expected to use FDRAWCMD anyway since it was used to manipulate non-standard formats. The risk of breaking the driver is higher than the risk presented by this race, and accessing the device requires privileges anyway. Let's just add a config option to completely disable this ioctl and leave it disabled by default. Distros shouldn't use it, and only those running on antique hardware might need to enable it. Link: https://lore.kernel.org/all/000000000000b71cdd05d703f6bf@google.com/ Link: https://lore.kernel.org/lkml/CAKcFiNC=MfYVW-Jt9A3=FPJpTwCD2PL_ULNCpsCVE5s8ZeBQgQ@mail.gmail.com Link: https://lore.kernel.org/all/CAEAjamu1FRhz6StCe_55XY5s389ZP_xmCF69k987En+1z53=eg@mail.gmail.com Reported-by: Minh Yuan <yuanmingbuaa@gmail.com> Reported-by: syzbot+8e8958586909d62b6840@syzkaller.appspotmail.com Reported-by: cruise k <cruise4k@gmail.com> Reported-by: Kyungtae Kim <kt0755@gmail.com> Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org> Tested-by: Denis Efremov <efremov@linux.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 233087ca063686964a53c829d547c7571e3f67bf upstream.

Minh Yuan reported a concurrency use-after-free issue in the floppy code
between raw_cmd_ioctl and seek_interrupt.

[ It turns out this has been around, and that others have reported the
  KASAN splats over the years, but Minh Yuan had a reproducer for it and
  so gets primary credit for reporting it for this fix   - Linus ]

The problem is, this driver tends to break very easily and nowadays,
nobody is expected to use FDRAWCMD anyway since it was used to
manipulate non-standard formats.  The risk of breaking the driver is
higher than the risk presented by this race, and accessing the device
requires privileges anyway.

Let's just add a config option to completely disable this ioctl and
leave it disabled by default.  Distros shouldn't use it, and only those
running on antique hardware might need to enable it.

Link: https://lore.kernel.org/all/000000000000b71cdd05d703f6bf@google.com/
Link: https://lore.kernel.org/lkml/CAKcFiNC=MfYVW-Jt9A3=FPJpTwCD2PL_ULNCpsCVE5s8ZeBQgQ@mail.gmail.com
Link: https://lore.kernel.org/all/CAEAjamu1FRhz6StCe_55XY5s389ZP_xmCF69k987En+1z53=eg@mail.gmail.com
Reported-by: Minh Yuan <yuanmingbuaa@gmail.com>
Reported-by: syzbot+8e8958586909d62b6840@syzkaller.appspotmail.com
Reported-by: cruise k <cruise4k@gmail.com>
Reported-by: Kyungtae Kim <kt0755@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Tested-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drbd: Fix five use after free bugs in get_initial_state 2022-04-20T07:06:44+00:00 Lv Yunlong lyl2019@mail.ustc.edu.cn 2022-04-06T19:04:43+00:00 0489700bfeb1e53eb2039c2291c67e71b0b40103 [ Upstream commit aadb22ba2f656581b2f733deb3a467c48cc618f6 ] In get_initial_state, it calls notify_initial_state_done(skb,..) if cb->args[5]==1. If genlmsg_put() failed in notify_initial_state_done(), the skb will be freed by nlmsg_free(skb). Then get_initial_state will goto out and the freed skb will be used by return value skb->len, which is a uaf bug. What's worse, the same problem goes even further: skb can also be freed in the notify_*_state_change -> notify_*_state calls below. Thus 4 additional uaf bugs happened. My patch lets the problem callee functions: notify_initial_state_done and notify_*_state_change return an error code if errors happen. So that the error codes could be propagated and the uaf bugs can be avoid. v2 reports a compilation warning. This v3 fixed this warning and built successfully in my local environment with no additional warnings. v2: https://lore.kernel.org/patchwork/patch/1435218/ Fixes: a29728463b254 ("drbd: Backport the "events2" command") Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn> Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit aadb22ba2f656581b2f733deb3a467c48cc618f6 ]

In get_initial_state, it calls notify_initial_state_done(skb,..) if
cb->args[5]==1. If genlmsg_put() failed in notify_initial_state_done(),
the skb will be freed by nlmsg_free(skb).
Then get_initial_state will goto out and the freed skb will be used by
return value skb->len, which is a uaf bug.

What's worse, the same problem goes even further: skb can also be
freed in the notify_*_state_change -> notify_*_state calls below.
Thus 4 additional uaf bugs happened.

My patch lets the problem callee functions: notify_initial_state_done
and notify_*_state_change return an error code if errors happen.
So that the error codes could be propagated and the uaf bugs can be avoid.

v2 reports a compilation warning. This v3 fixed this warning and built
successfully in my local environment with no additional warnings.
v2: https://lore.kernel.org/patchwork/patch/1435218/

Fixes: a29728463b254 ("drbd: Backport the "events2" command")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
loop: use sysfs_emit() in the sysfs xxx show() 2022-04-20T07:06:38+00:00 Chaitanya Kulkarni kch@nvidia.com 2022-02-15T21:33:07+00:00 0e0d0dc27dad0036874d18f712b76ff05a3b89f9 [ Upstream commit b27824d31f09ea7b4a6ba2c1b18bd328df3e8bed ] sprintf does not know the PAGE_SIZE maximum of the temporary buffer used for outputting sysfs content and it's possible to overrun the PAGE_SIZE buffer length. Use a generic sysfs_emit function that knows the size of the temporary buffer and ensures that no overrun is done for offset attribute in loop_attr_[offset|sizelimit|autoclear|partscan|dio]_show() callbacks. Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Link: https://lore.kernel.org/r/20220215213310.7264-2-kch@nvidia.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit b27824d31f09ea7b4a6ba2c1b18bd328df3e8bed ]

sprintf does not know the PAGE_SIZE maximum of the temporary buffer
used for outputting sysfs content and it's possible to overrun the
PAGE_SIZE buffer length.

Use a generic sysfs_emit function that knows the size of the
temporary buffer and ensures that no overrun is done for offset
attribute in
loop_attr_[offset|sizelimit|autoclear|partscan|dio]_show() callbacks.

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Link: https://lore.kernel.org/r/20220215213310.7264-2-kch@nvidia.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
virtio-blk: Use blk_validate_block_size() to validate block size 2022-04-20T07:06:28+00:00 Xie Yongji xieyongji@bytedance.com 2021-10-26T14:40:15+00:00 1cd34300f455d5d61f222c37743dfbaf4904d0fb commit 57a13a5b8157d9a8606490aaa1b805bafe6c37e1 upstream. The block layer can't support a block size larger than page size yet. And a block size that's too small or not a power of two won't work either. If a misconfigured device presents an invalid block size in configuration space, it will result in the kernel crash something like below: [ 506.154324] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 506.160416] RIP: 0010:create_empty_buffers+0x24/0x100 [ 506.174302] Call Trace: [ 506.174651] create_page_buffers+0x4d/0x60 [ 506.175207] block_read_full_page+0x50/0x380 [ 506.175798] ? __mod_lruvec_page_state+0x60/0xa0 [ 506.176412] ? __add_to_page_cache_locked+0x1b2/0x390 [ 506.177085] ? blkdev_direct_IO+0x4a0/0x4a0 [ 506.177644] ? scan_shadow_nodes+0x30/0x30 [ 506.178206] ? lru_cache_add+0x42/0x60 [ 506.178716] do_read_cache_page+0x695/0x740 [ 506.179278] ? read_part_sector+0xe0/0xe0 [ 506.179821] read_part_sector+0x36/0xe0 [ 506.180337] adfspart_check_ICS+0x32/0x320 [ 506.180890] ? snprintf+0x45/0x70 [ 506.181350] ? read_part_sector+0xe0/0xe0 [ 506.181906] bdev_disk_changed+0x229/0x5c0 [ 506.182483] blkdev_get_whole+0x6d/0x90 [ 506.183013] blkdev_get_by_dev+0x122/0x2d0 [ 506.183562] device_add_disk+0x39e/0x3c0 [ 506.184472] virtblk_probe+0x3f8/0x79b [virtio_blk] [ 506.185461] virtio_dev_probe+0x15e/0x1d0 [virtio] So let's use a block layer helper to validate the block size. Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20211026144015.188-5-xieyongji@bytedance.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 57a13a5b8157d9a8606490aaa1b805bafe6c37e1 upstream.

The block layer can't support a block size larger than
page size yet. And a block size that's too small or
not a power of two won't work either. If a misconfigured
device presents an invalid block size in configuration space,
it will result in the kernel crash something like below:

[  506.154324] BUG: kernel NULL pointer dereference, address: 0000000000000008
[  506.160416] RIP: 0010:create_empty_buffers+0x24/0x100
[  506.174302] Call Trace:
[  506.174651]  create_page_buffers+0x4d/0x60
[  506.175207]  block_read_full_page+0x50/0x380
[  506.175798]  ? __mod_lruvec_page_state+0x60/0xa0
[  506.176412]  ? __add_to_page_cache_locked+0x1b2/0x390
[  506.177085]  ? blkdev_direct_IO+0x4a0/0x4a0
[  506.177644]  ? scan_shadow_nodes+0x30/0x30
[  506.178206]  ? lru_cache_add+0x42/0x60
[  506.178716]  do_read_cache_page+0x695/0x740
[  506.179278]  ? read_part_sector+0xe0/0xe0
[  506.179821]  read_part_sector+0x36/0xe0
[  506.180337]  adfspart_check_ICS+0x32/0x320
[  506.180890]  ? snprintf+0x45/0x70
[  506.181350]  ? read_part_sector+0xe0/0xe0
[  506.181906]  bdev_disk_changed+0x229/0x5c0
[  506.182483]  blkdev_get_whole+0x6d/0x90
[  506.183013]  blkdev_get_by_dev+0x122/0x2d0
[  506.183562]  device_add_disk+0x39e/0x3c0
[  506.184472]  virtblk_probe+0x3f8/0x79b [virtio_blk]
[  506.185461]  virtio_dev_probe+0x15e/0x1d0 [virtio]

So let's use a block layer helper to validate the block size.

Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20211026144015.188-5-xieyongji@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>