linux-stable.git/drivers/block, branch linux-2.6.39.y Linux kernel stable tree nbd: limit module parameters to a sane value 2011-06-23T22:05:32+00:00 Namhyung Kim namhyung@gmail.com 2011-05-28T12:44:46+00:00 e0b1510e56c0f40a7d84a766a53521a268c41d75 commit 3b2710824e00d238554c13b5add347e6c701ab1a upstream. The 'max_part' parameter controls the number of maximum partition a nbd device can have. However if a user specifies very large value it would exceed the limitation of device minor number and can cause a kernel oops (or, at least, produce invalid device nodes in some cases). In addition, specifying large 'nbds_max' value causes same problem for the same reason. On my desktop, following command results to the kernel bug: $ sudo modprobe nbd max_part=100000 kernel BUG at /media/Linux_Data/project/linux/fs/sysfs/group.c:65! invalid opcode: 0000 [#1] SMP last sysfs file: /sys/devices/virtual/block/nbd4/range CPU 1 Modules linked in: nbd(+) bridge stp llc kvm_intel kvm asus_atk0110 sg sr_mod cdrom Pid: 2522, comm: modprobe Tainted: G W 2.6.39-leonard+ #159 System manufacturer System Product Name/P5G41TD-M PRO RIP: 0010:[<ffffffff8115aa08>] [<ffffffff8115aa08>] internal_create_group+0x2f/0x166 RSP: 0018:ffff8801009f1de8 EFLAGS: 00010246 RAX: 00000000ffffffef RBX: ffff880103920478 RCX: 00000000000a7bd3 RDX: ffffffff81a2dbe0 RSI: 0000000000000000 RDI: ffff880103920478 RBP: ffff8801009f1e38 R08: ffff880103920468 R09: ffff880103920478 R10: ffff8801009f1de8 R11: ffff88011eccbb68 R12: ffffffff81a2dbe0 R13: ffff880103920468 R14: 0000000000000000 R15: ffff880103920400 FS: 00007f3c49de9700(0000) GS:ffff88011f800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f3b7fe7c000 CR3: 00000000cd58d000 CR4: 00000000000406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process modprobe (pid: 2522, threadinfo ffff8801009f0000, task ffff8801009a93a0) Stack: ffff8801009f1e58 ffffffff812e8f6e ffff8801009f1e58 ffffffff812e7a80 ffff880000000010 ffff880103920400 ffff8801002fd0c0 ffff880103920468 0000000000000011 ffff880103920400 ffff8801009f1e48 ffffffff8115ab6a Call Trace: [<ffffffff812e8f6e>] ? device_add+0x4f1/0x5e4 [<ffffffff812e7a80>] ? dev_set_name+0x41/0x43 [<ffffffff8115ab6a>] sysfs_create_group+0x13/0x15 [<ffffffff810b857e>] blk_trace_init_sysfs+0x14/0x16 [<ffffffff811ee58b>] blk_register_queue+0x4c/0xfd [<ffffffff811f3bdf>] add_disk+0xe4/0x29c [<ffffffffa007e2ab>] nbd_init+0x2ab/0x30d [nbd] [<ffffffffa007e000>] ? 0xffffffffa007dfff [<ffffffff8100020f>] do_one_initcall+0x7f/0x13e [<ffffffff8107ab0a>] sys_init_module+0xa1/0x1e3 [<ffffffff814f3542>] system_call_fastpath+0x16/0x1b Code: 41 57 41 56 41 55 41 54 53 48 83 ec 28 0f 1f 44 00 00 48 89 fb 41 89 f6 49 89 d4 48 85 ff 74 0b 85 f6 75 0b 48 83 7f 30 00 75 14 <0f> 0b eb fe b9 ea ff ff ff 48 83 7f 30 00 0f 84 09 01 00 00 49 RIP [<ffffffff8115aa08>] internal_create_group+0x2f/0x166 RSP <ffff8801009f1de8> ---[ end trace 753285ffbf72c57c ]--- Signed-off-by: Namhyung Kim <namhyung@gmail.com> Cc: Laurent Vivier <Laurent.Vivier@bull.net> Cc: Paul Clements <Paul.Clements@steeleye.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 3b2710824e00d238554c13b5add347e6c701ab1a upstream.

The 'max_part' parameter controls the number of maximum partition
a nbd device can have. However if a user specifies very large
value it would exceed the limitation of device minor number and
can cause a kernel oops (or, at least, produce invalid device
nodes in some cases).

In addition, specifying large 'nbds_max' value causes same
problem for the same reason.

On my desktop, following command results to the kernel bug:

$ sudo modprobe nbd max_part=100000
 kernel BUG at /media/Linux_Data/project/linux/fs/sysfs/group.c:65!
 invalid opcode: 0000 [#1] SMP
 last sysfs file: /sys/devices/virtual/block/nbd4/range
 CPU 1
 Modules linked in: nbd(+) bridge stp llc kvm_intel kvm asus_atk0110 sg sr_mod cdrom

 Pid: 2522, comm: modprobe Tainted: G        W   2.6.39-leonard+ #159 System manufacturer System Product Name/P5G41TD-M PRO
 RIP: 0010:[<ffffffff8115aa08>]  [<ffffffff8115aa08>] internal_create_group+0x2f/0x166
 RSP: 0018:ffff8801009f1de8  EFLAGS: 00010246
 RAX: 00000000ffffffef RBX: ffff880103920478 RCX: 00000000000a7bd3
 RDX: ffffffff81a2dbe0 RSI: 0000000000000000 RDI: ffff880103920478
 RBP: ffff8801009f1e38 R08: ffff880103920468 R09: ffff880103920478
 R10: ffff8801009f1de8 R11: ffff88011eccbb68 R12: ffffffff81a2dbe0
 R13: ffff880103920468 R14: 0000000000000000 R15: ffff880103920400
 FS:  00007f3c49de9700(0000) GS:ffff88011f800000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
 CR2: 00007f3b7fe7c000 CR3: 00000000cd58d000 CR4: 00000000000406e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
 Process modprobe (pid: 2522, threadinfo ffff8801009f0000, task ffff8801009a93a0)
 Stack:
  ffff8801009f1e58 ffffffff812e8f6e ffff8801009f1e58 ffffffff812e7a80
  ffff880000000010 ffff880103920400 ffff8801002fd0c0 ffff880103920468
  0000000000000011 ffff880103920400 ffff8801009f1e48 ffffffff8115ab6a
 Call Trace:
  [<ffffffff812e8f6e>] ? device_add+0x4f1/0x5e4
  [<ffffffff812e7a80>] ? dev_set_name+0x41/0x43
  [<ffffffff8115ab6a>] sysfs_create_group+0x13/0x15
  [<ffffffff810b857e>] blk_trace_init_sysfs+0x14/0x16
  [<ffffffff811ee58b>] blk_register_queue+0x4c/0xfd
  [<ffffffff811f3bdf>] add_disk+0xe4/0x29c
  [<ffffffffa007e2ab>] nbd_init+0x2ab/0x30d [nbd]
  [<ffffffffa007e000>] ? 0xffffffffa007dfff
  [<ffffffff8100020f>] do_one_initcall+0x7f/0x13e
  [<ffffffff8107ab0a>] sys_init_module+0xa1/0x1e3
  [<ffffffff814f3542>] system_call_fastpath+0x16/0x1b
 Code: 41 57 41 56 41 55 41 54 53 48 83 ec 28 0f 1f 44 00 00 48 89 fb 41 89 f6 49 89 d4 48 85 ff 74 0b 85 f6 75 0b 48 83
  7f 30 00 75 14 <0f> 0b eb fe b9 ea ff ff ff 48 83 7f 30 00 0f 84 09 01 00 00 49
 RIP  [<ffffffff8115aa08>] internal_create_group+0x2f/0x166
  RSP <ffff8801009f1de8>
 ---[ end trace 753285ffbf72c57c ]---

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Laurent Vivier <Laurent.Vivier@bull.net>
Cc: Paul Clements <Paul.Clements@steeleye.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
block: don't block events on excl write for non-optical devices 2011-06-03T00:32:50+00:00 Tejun Heo tj@kernel.org 2011-04-21T18:54:46+00:00 9a18274e9444e3581a6ba7479ddad080d1be63c0 commit d4dc210f69bcb0b4bef5a83b1c323817be89bad1 upstream. Disk event code automatically blocks events on excl write. This is primarily to avoid issuing polling commands while burning is in progress. This behavior doesn't fit other types of devices with removeable media where polling commands don't have adverse side effects and door locking usually doesn't exist. This patch introduces new genhd flag which controls the auto-blocking behavior and uses it to enable auto-blocking only on optical devices. Note for stable: 2.6.38 and later only Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit d4dc210f69bcb0b4bef5a83b1c323817be89bad1 upstream.

Disk event code automatically blocks events on excl write.  This is
primarily to avoid issuing polling commands while burning is in
progress.  This behavior doesn't fit other types of devices with
removeable media where polling commands don't have adverse side
effects and door locking usually doesn't exist.

This patch introduces new genhd flag which controls the auto-blocking
behavior and uses it to enable auto-blocking only on optical devices.

Note for stable: 2.6.38 and later only

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
brd: handle on-demand devices correctly 2011-06-03T00:32:38+00:00 Namhyung Kim namhyung@gmail.com 2011-05-26T19:06:50+00:00 23dffbd0c8e3d6e418c7438f7343dcc83fefa87b commit af46566885a373b0a526932484cd8fef8de7b598 upstream. When finding or allocating a ram disk device, brd_probe() did not take partition numbers into account so that it can result to a different device. Consider following example (I set CONFIG_BLK_DEV_RAM_COUNT=4 for simplicity) : $ sudo modprobe brd max_part=15 $ ls -l /dev/ram* brw-rw---- 1 root disk 1, 0 2011-05-25 15:41 /dev/ram0 brw-rw---- 1 root disk 1, 16 2011-05-25 15:41 /dev/ram1 brw-rw---- 1 root disk 1, 32 2011-05-25 15:41 /dev/ram2 brw-rw---- 1 root disk 1, 48 2011-05-25 15:41 /dev/ram3 $ sudo mknod /dev/ram4 b 1 64 $ sudo dd if=/dev/zero of=/dev/ram4 bs=4k count=256 256+0 records in 256+0 records out 1048576 bytes (1.0 MB) copied, 0.00215578 s, 486 MB/s namhyung@leonhard:linux$ ls -l /dev/ram* brw-rw---- 1 root disk 1, 0 2011-05-25 15:41 /dev/ram0 brw-rw---- 1 root disk 1, 16 2011-05-25 15:41 /dev/ram1 brw-rw---- 1 root disk 1, 32 2011-05-25 15:41 /dev/ram2 brw-rw---- 1 root disk 1, 48 2011-05-25 15:41 /dev/ram3 brw-r--r-- 1 root root 1, 64 2011-05-25 15:45 /dev/ram4 brw-rw---- 1 root disk 1, 1024 2011-05-25 15:44 /dev/ram64 After this patch, /dev/ram4 - instead of /dev/ram64 - was accessed correctly. In addition, 'range' passed to blk_register_region() should include all range of dev_t that RAMDISK_MAJOR can address. It does not need to be limited by partition numbers unless 'rd_nr' param was specified. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Cc: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Jens Axboe <jaxboe@fusionio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit af46566885a373b0a526932484cd8fef8de7b598 upstream.

When finding or allocating a ram disk device, brd_probe() did not take
partition numbers into account so that it can result to a different
device. Consider following example (I set CONFIG_BLK_DEV_RAM_COUNT=4
for simplicity) :

$ sudo modprobe brd max_part=15
$ ls -l /dev/ram*
brw-rw---- 1 root disk 1,  0 2011-05-25 15:41 /dev/ram0
brw-rw---- 1 root disk 1, 16 2011-05-25 15:41 /dev/ram1
brw-rw---- 1 root disk 1, 32 2011-05-25 15:41 /dev/ram2
brw-rw---- 1 root disk 1, 48 2011-05-25 15:41 /dev/ram3
$ sudo mknod /dev/ram4 b 1 64
$ sudo dd if=/dev/zero of=/dev/ram4 bs=4k count=256
256+0 records in
256+0 records out
1048576 bytes (1.0 MB) copied, 0.00215578 s, 486 MB/s
namhyung@leonhard:linux$ ls -l /dev/ram*
brw-rw---- 1 root disk 1,    0 2011-05-25 15:41 /dev/ram0
brw-rw---- 1 root disk 1,   16 2011-05-25 15:41 /dev/ram1
brw-rw---- 1 root disk 1,   32 2011-05-25 15:41 /dev/ram2
brw-rw---- 1 root disk 1,   48 2011-05-25 15:41 /dev/ram3
brw-r--r-- 1 root root 1,   64 2011-05-25 15:45 /dev/ram4
brw-rw---- 1 root disk 1, 1024 2011-05-25 15:44 /dev/ram64

After this patch, /dev/ram4 - instead of /dev/ram64 - was
accessed correctly.

In addition, 'range' passed to blk_register_region() should
include all range of dev_t that RAMDISK_MAJOR can address.
It does not need to be limited by partition numbers unless
'rd_nr' param was specified.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Laurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
brd: limit 'max_part' module param to DISK_MAX_PARTS 2011-06-03T00:32:37+00:00 Namhyung Kim namhyung@gmail.com 2011-05-26T19:06:50+00:00 db39f5be9655ae28ba51d06b5c353f619abf826a commit 315980c8688c4b06713c1a5fe9d64cdf8ab57a72 upstream. The 'max_part' parameter controls the number of maximum partition a brd device can have. However if a user specifies very large value it would exceed the limitation of device minor number and can cause a kernel panic (or, at least, produce invalid device nodes in some cases). On my desktop system, following command kills the kernel. On qemu, it triggers similar oops but the kernel was alive: $ sudo modprobe brd max_part=100000 BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 IP: [<ffffffff81110a9a>] sysfs_create_dir+0x2d/0xae PGD 7af1067 PUD 7b19067 PMD 0 Oops: 0000 [#1] SMP last sysfs file: CPU 0 Modules linked in: brd(+) Pid: 44, comm: insmod Tainted: G W 2.6.39-qemu+ #158 Bochs Bochs RIP: 0010:[<ffffffff81110a9a>] [<ffffffff81110a9a>] sysfs_create_dir+0x2d/0xae RSP: 0018:ffff880007b15d78 EFLAGS: 00000286 RAX: ffff880007b05478 RBX: ffff880007a52760 RCX: ffff880007b15dc8 RDX: ffff880007a4f900 RSI: ffff880007b15e48 RDI: ffff880007a52760 RBP: ffff880007b15da8 R08: 0000000000000002 R09: 0000000000000000 R10: ffff880007b15e48 R11: ffff880007b05478 R12: 0000000000000000 R13: ffff880007b05478 R14: 0000000000400920 R15: 0000000000000063 FS: 0000000002160880(0063) GS:ffff880007c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000058 CR3: 0000000007b1c000 CR4: 00000000000006b0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000 Process insmod (pid: 44, threadinfo ffff880007b14000, task ffff880007acb980) Stack: ffff880007b15dc8 ffff880007b05478 ffff880007b15da8 00000000fffffffe ffff880007a52760 ffff880007b05478 ffff880007b15de8 ffffffff81143c0a 0000000000400920 ffff880007a52760 ffff880007b05478 0000000000000000 Call Trace: [<ffffffff81143c0a>] kobject_add_internal+0xdf/0x1a0 [<ffffffff81143da1>] kobject_add_varg+0x41/0x50 [<ffffffff81143e6b>] kobject_add+0x64/0x66 [<ffffffff8113bbe7>] blk_register_queue+0x5f/0xb8 [<ffffffff81140f72>] add_disk+0xdf/0x289 [<ffffffffa00040df>] brd_init+0xdf/0x1aa [brd] [<ffffffffa0004000>] ? 0xffffffffa0003fff [<ffffffffa0004000>] ? 0xffffffffa0003fff [<ffffffff8100020a>] do_one_initcall+0x7a/0x12e [<ffffffff8108516c>] sys_init_module+0x9c/0x1dc [<ffffffff812ff4bb>] system_call_fastpath+0x16/0x1b Code: 89 e5 41 55 41 54 53 48 89 fb 48 83 ec 18 48 85 ff 75 04 0f 0b eb fe 48 8b 47 18 49 c7 c4 70 1e 4d 81 48 85 c0 74 04 4c 8b 60 30 8b 44 24 58 45 31 ed 0f b6 c4 85 c0 74 0d 48 8b 43 28 48 89 RIP [<ffffffff81110a9a>] sysfs_create_dir+0x2d/0xae RSP <ffff880007b15d78> CR2: 0000000000000058 ---[ end trace aebb1175ce1f6739 ]--- Signed-off-by: Namhyung Kim <namhyung@gmail.com> Cc: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Jens Axboe <jaxboe@fusionio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 315980c8688c4b06713c1a5fe9d64cdf8ab57a72 upstream.

The 'max_part' parameter controls the number of maximum partition
a brd device can have. However if a user specifies very large
value it would exceed the limitation of device minor number and
can cause a kernel panic (or, at least, produce invalid device
nodes in some cases).

On my desktop system, following command kills the kernel. On qemu,
it triggers similar oops but the kernel was alive:

$ sudo modprobe brd max_part=100000
 BUG: unable to handle kernel NULL pointer dereference at 0000000000000058
 IP: [<ffffffff81110a9a>] sysfs_create_dir+0x2d/0xae
 PGD 7af1067 PUD 7b19067 PMD 0
 Oops: 0000 [#1] SMP
 last sysfs file:
 CPU 0
 Modules linked in: brd(+)

 Pid: 44, comm: insmod Tainted: G        W   2.6.39-qemu+ #158 Bochs Bochs
 RIP: 0010:[<ffffffff81110a9a>]  [<ffffffff81110a9a>] sysfs_create_dir+0x2d/0xae
 RSP: 0018:ffff880007b15d78  EFLAGS: 00000286
 RAX: ffff880007b05478 RBX: ffff880007a52760 RCX: ffff880007b15dc8
 RDX: ffff880007a4f900 RSI: ffff880007b15e48 RDI: ffff880007a52760
 RBP: ffff880007b15da8 R08: 0000000000000002 R09: 0000000000000000
 R10: ffff880007b15e48 R11: ffff880007b05478 R12: 0000000000000000
 R13: ffff880007b05478 R14: 0000000000400920 R15: 0000000000000063
 FS:  0000000002160880(0063) GS:ffff880007c00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000058 CR3: 0000000007b1c000 CR4: 00000000000006b0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000
 Process insmod (pid: 44, threadinfo ffff880007b14000, task ffff880007acb980)
 Stack:
  ffff880007b15dc8 ffff880007b05478 ffff880007b15da8 00000000fffffffe
  ffff880007a52760 ffff880007b05478 ffff880007b15de8 ffffffff81143c0a
  0000000000400920 ffff880007a52760 ffff880007b05478 0000000000000000
 Call Trace:
  [<ffffffff81143c0a>] kobject_add_internal+0xdf/0x1a0
  [<ffffffff81143da1>] kobject_add_varg+0x41/0x50
  [<ffffffff81143e6b>] kobject_add+0x64/0x66
  [<ffffffff8113bbe7>] blk_register_queue+0x5f/0xb8
  [<ffffffff81140f72>] add_disk+0xdf/0x289
  [<ffffffffa00040df>] brd_init+0xdf/0x1aa [brd]
  [<ffffffffa0004000>] ? 0xffffffffa0003fff
  [<ffffffffa0004000>] ? 0xffffffffa0003fff
  [<ffffffff8100020a>] do_one_initcall+0x7a/0x12e
  [<ffffffff8108516c>] sys_init_module+0x9c/0x1dc
  [<ffffffff812ff4bb>] system_call_fastpath+0x16/0x1b
 Code: 89 e5 41 55 41 54 53 48 89 fb 48 83 ec 18 48 85 ff 75 04 0f 0b eb fe 48 8b 47 18 49 c7 c4 70 1e 4d 81 48 85 c0 74 04 4c 8b 60 30
  8b 44 24 58 45 31 ed 0f b6 c4 85 c0 74 0d 48 8b 43 28 48 89
 RIP  [<ffffffff81110a9a>] sysfs_create_dir+0x2d/0xae
  RSP <ffff880007b15d78>
 CR2: 0000000000000058
 ---[ end trace aebb1175ce1f6739 ]---

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Laurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
loop: handle on-demand devices correctly 2011-06-03T00:32:18+00:00 Namhyung Kim namhyung@gmail.com 2011-05-24T14:48:55+00:00 76575b1770af39c3583242c3d22fa012603c1223 commit a1c15c59feee36267c43142a41152fbf7402afb6 upstream. When finding or allocating a loop device, loop_probe() did not take partition numbers into account so that it can result to a different device. Consider following example: $ sudo modprobe loop max_part=15 $ ls -l /dev/loop* brw-rw---- 1 root disk 7, 0 2011-05-24 22:16 /dev/loop0 brw-rw---- 1 root disk 7, 16 2011-05-24 22:16 /dev/loop1 brw-rw---- 1 root disk 7, 32 2011-05-24 22:16 /dev/loop2 brw-rw---- 1 root disk 7, 48 2011-05-24 22:16 /dev/loop3 brw-rw---- 1 root disk 7, 64 2011-05-24 22:16 /dev/loop4 brw-rw---- 1 root disk 7, 80 2011-05-24 22:16 /dev/loop5 brw-rw---- 1 root disk 7, 96 2011-05-24 22:16 /dev/loop6 brw-rw---- 1 root disk 7, 112 2011-05-24 22:16 /dev/loop7 $ sudo mknod /dev/loop8 b 7 128 $ sudo losetup /dev/loop8 ~/temp/disk-with-3-parts.img $ sudo losetup -a /dev/loop128: [0805]:278201 (/home/namhyung/temp/disk-with-3-parts.img) $ ls -l /dev/loop* brw-rw---- 1 root disk 7, 0 2011-05-24 22:16 /dev/loop0 brw-rw---- 1 root disk 7, 16 2011-05-24 22:16 /dev/loop1 brw-rw---- 1 root disk 7, 2048 2011-05-24 22:18 /dev/loop128 brw-rw---- 1 root disk 7, 2049 2011-05-24 22:18 /dev/loop128p1 brw-rw---- 1 root disk 7, 2050 2011-05-24 22:18 /dev/loop128p2 brw-rw---- 1 root disk 7, 2051 2011-05-24 22:18 /dev/loop128p3 brw-rw---- 1 root disk 7, 32 2011-05-24 22:16 /dev/loop2 brw-rw---- 1 root disk 7, 48 2011-05-24 22:16 /dev/loop3 brw-rw---- 1 root disk 7, 64 2011-05-24 22:16 /dev/loop4 brw-rw---- 1 root disk 7, 80 2011-05-24 22:16 /dev/loop5 brw-rw---- 1 root disk 7, 96 2011-05-24 22:16 /dev/loop6 brw-rw---- 1 root disk 7, 112 2011-05-24 22:16 /dev/loop7 brw-r--r-- 1 root root 7, 128 2011-05-24 22:17 /dev/loop8 After this patch, /dev/loop8 - instead of /dev/loop128 - was accessed correctly. In addition, 'range' passed to blk_register_region() should include all range of dev_t that LOOP_MAJOR can address. It does not need to be limited by partition numbers unless 'max_loop' param was specified. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Cc: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Jens Axboe <jaxboe@fusionio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit a1c15c59feee36267c43142a41152fbf7402afb6 upstream.

When finding or allocating a loop device, loop_probe() did not take
partition numbers into account so that it can result to a different
device. Consider following example:

$ sudo modprobe loop max_part=15
$ ls -l /dev/loop*
brw-rw---- 1 root disk 7,   0 2011-05-24 22:16 /dev/loop0
brw-rw---- 1 root disk 7,  16 2011-05-24 22:16 /dev/loop1
brw-rw---- 1 root disk 7,  32 2011-05-24 22:16 /dev/loop2
brw-rw---- 1 root disk 7,  48 2011-05-24 22:16 /dev/loop3
brw-rw---- 1 root disk 7,  64 2011-05-24 22:16 /dev/loop4
brw-rw---- 1 root disk 7,  80 2011-05-24 22:16 /dev/loop5
brw-rw---- 1 root disk 7,  96 2011-05-24 22:16 /dev/loop6
brw-rw---- 1 root disk 7, 112 2011-05-24 22:16 /dev/loop7
$ sudo mknod /dev/loop8 b 7 128
$ sudo losetup /dev/loop8 ~/temp/disk-with-3-parts.img
$ sudo losetup -a
/dev/loop128: [0805]:278201 (/home/namhyung/temp/disk-with-3-parts.img)
$ ls -l /dev/loop*
brw-rw---- 1 root disk 7,    0 2011-05-24 22:16 /dev/loop0
brw-rw---- 1 root disk 7,   16 2011-05-24 22:16 /dev/loop1
brw-rw---- 1 root disk 7, 2048 2011-05-24 22:18 /dev/loop128
brw-rw---- 1 root disk 7, 2049 2011-05-24 22:18 /dev/loop128p1
brw-rw---- 1 root disk 7, 2050 2011-05-24 22:18 /dev/loop128p2
brw-rw---- 1 root disk 7, 2051 2011-05-24 22:18 /dev/loop128p3
brw-rw---- 1 root disk 7,   32 2011-05-24 22:16 /dev/loop2
brw-rw---- 1 root disk 7,   48 2011-05-24 22:16 /dev/loop3
brw-rw---- 1 root disk 7,   64 2011-05-24 22:16 /dev/loop4
brw-rw---- 1 root disk 7,   80 2011-05-24 22:16 /dev/loop5
brw-rw---- 1 root disk 7,   96 2011-05-24 22:16 /dev/loop6
brw-rw---- 1 root disk 7,  112 2011-05-24 22:16 /dev/loop7
brw-r--r-- 1 root root 7,  128 2011-05-24 22:17 /dev/loop8

After this patch, /dev/loop8 - instead of /dev/loop128 - was
accessed correctly.

In addition, 'range' passed to blk_register_region() should
include all range of dev_t that LOOP_MAJOR can address. It does
not need to be limited by partition numbers unless 'max_loop'
param was specified.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Laurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
loop: limit 'max_part' module param to DISK_MAX_PARTS 2011-06-03T00:32:17+00:00 Namhyung Kim namhyung@gmail.com 2011-05-24T14:48:54+00:00 95f49bfc1c873713762561e2087de910e8824760 commit 78f4bb367fd147a0e7e3998ba6e47109999d8814 upstream. The 'max_part' parameter controls the number of maximum partition a loop block device can have. However if a user specifies very large value it would exceed the limitation of device minor number and can cause a kernel panic (or, at least, produce invalid device nodes in some cases). On my desktop system, following command kills the kernel. On qemu, it triggers similar oops but the kernel was alive: $ sudo modprobe loop max_part0000 ------------[ cut here ]------------ kernel BUG at /media/Linux_Data/project/linux/fs/sysfs/group.c:65! invalid opcode: 0000 [#1] SMP last sysfs file: CPU 0 Modules linked in: loop(+) Pid: 43, comm: insmod Tainted: G W 2.6.39-qemu+ #155 Bochs Bochs RIP: 0010:[<ffffffff8113ce61>] [<ffffffff8113ce61>] internal_create_group= +0x2a/0x170 RSP: 0018:ffff880007b3fde8 EFLAGS: 00000246 RAX: 00000000ffffffef RBX: ffff880007b3d878 RCX: 00000000000007b4 RDX: ffffffff8152da50 RSI: 0000000000000000 RDI: ffff880007b3d878 RBP: ffff880007b3fe38 R08: ffff880007b3fde8 R09: 0000000000000000 R10: ffff88000783b4a8 R11: ffff880007b3d878 R12: ffffffff8152da50 R13: ffff880007b3d868 R14: 0000000000000000 R15: ffff880007b3d800 FS: 0000000002137880(0063) GS:ffff880007c00000(0000) knlGS:00000000000000= 00 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000422680 CR3: 0000000007b50000 CR4: 00000000000006b0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000 Process insmod (pid: 43, threadinfo ffff880007b3e000, task ffff880007afb9c= 0) Stack: ffff880007b3fe58 ffffffff811e66dd ffff880007b3fe58 ffffffff811e570b 0000000000000010 ffff880007b3d800 ffff880007a7b390 ffff880007b3d868 0000000000400920 ffff880007b3d800 ffff880007b3fe48 ffffffff8113cfc8 Call Trace: [<ffffffff811e66dd>] ? device_add+0x4bc/0x5af [<ffffffff811e570b>] ? dev_set_name+0x3c/0x3e [<ffffffff8113cfc8>] sysfs_create_group+0xe/0x12 [<ffffffff810b420e>] blk_trace_init_sysfs+0x14/0x16 [<ffffffff8116a090>] blk_register_queue+0x47/0xf7 [<ffffffff8116f527>] add_disk+0xdf/0x290 [<ffffffffa00060eb>] loop_init+0xeb/0x1b8 [loop] [<ffffffffa0006000>] ? 0xffffffffa0005fff [<ffffffff8100020a>] do_one_initcall+0x7a/0x12e [<ffffffff81096804>] sys_init_module+0x9c/0x1e0 [<ffffffff813329bb>] system_call_fastpath+0x16/0x1b Code: c3 55 48 89 e5 41 57 41 56 41 89 f6 41 55 41 54 49 89 d4 53 48 89 fb= 48 83 ec 28 48 85 ff 74 0b 85 f6 75 0b 48 83 7f 30 00 75 14 <0f> 0b eb fe = 48 83 7f 30 00 b9 ea ff ff ff 0f 84 18 01 00 00 49 RIP [<ffffffff8113ce61>] internal_create_group+0x2a/0x170 RSP <ffff880007b3fde8> ---[ end trace a123eb592043acad ]--- Signed-off-by: Namhyung Kim <namhyung@gmail.com> Cc: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Jens Axboe <jaxboe@fusionio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 78f4bb367fd147a0e7e3998ba6e47109999d8814 upstream.

The 'max_part' parameter controls the number of maximum partition
a loop block device can have. However if a user specifies very
large value it would exceed the limitation of device minor number
and can cause a kernel panic (or, at least, produce invalid
device nodes in some cases).

On my desktop system, following command kills the kernel. On qemu,
it triggers similar oops but the kernel was alive:

$ sudo modprobe loop max_part0000
 ------------[ cut here ]------------
 kernel BUG at /media/Linux_Data/project/linux/fs/sysfs/group.c:65!
 invalid opcode: 0000 [#1] SMP
 last sysfs file:
 CPU 0
 Modules linked in: loop(+)

 Pid: 43, comm: insmod Tainted: G        W   2.6.39-qemu+ #155 Bochs Bochs
 RIP: 0010:[<ffffffff8113ce61>]  [<ffffffff8113ce61>] internal_create_group=
+0x2a/0x170
 RSP: 0018:ffff880007b3fde8  EFLAGS: 00000246
 RAX: 00000000ffffffef RBX: ffff880007b3d878 RCX: 00000000000007b4
 RDX: ffffffff8152da50 RSI: 0000000000000000 RDI: ffff880007b3d878
 RBP: ffff880007b3fe38 R08: ffff880007b3fde8 R09: 0000000000000000
 R10: ffff88000783b4a8 R11: ffff880007b3d878 R12: ffffffff8152da50
 R13: ffff880007b3d868 R14: 0000000000000000 R15: ffff880007b3d800
 FS:  0000000002137880(0063) GS:ffff880007c00000(0000) knlGS:00000000000000=
00
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000422680 CR3: 0000000007b50000 CR4: 00000000000006b0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000
 Process insmod (pid: 43, threadinfo ffff880007b3e000, task ffff880007afb9c=
0)
 Stack:
  ffff880007b3fe58 ffffffff811e66dd ffff880007b3fe58 ffffffff811e570b
  0000000000000010 ffff880007b3d800 ffff880007a7b390 ffff880007b3d868
  0000000000400920 ffff880007b3d800 ffff880007b3fe48 ffffffff8113cfc8
 Call Trace:
  [<ffffffff811e66dd>] ? device_add+0x4bc/0x5af
  [<ffffffff811e570b>] ? dev_set_name+0x3c/0x3e
  [<ffffffff8113cfc8>] sysfs_create_group+0xe/0x12
  [<ffffffff810b420e>] blk_trace_init_sysfs+0x14/0x16
  [<ffffffff8116a090>] blk_register_queue+0x47/0xf7
  [<ffffffff8116f527>] add_disk+0xdf/0x290
  [<ffffffffa00060eb>] loop_init+0xeb/0x1b8 [loop]
  [<ffffffffa0006000>] ? 0xffffffffa0005fff
  [<ffffffff8100020a>] do_one_initcall+0x7a/0x12e
  [<ffffffff81096804>] sys_init_module+0x9c/0x1e0
  [<ffffffff813329bb>] system_call_fastpath+0x16/0x1b
 Code: c3 55 48 89 e5 41 57 41 56 41 89 f6 41 55 41 54 49 89 d4 53 48 89 fb=
 48 83 ec 28 48 85 ff 74 0b 85 f6 75 0b 48 83 7f 30 00 75 14 <0f> 0b eb fe =
48 83 7f 30 00 b9 ea ff ff ff 0f 84 18 01 00 00 49
 RIP  [<ffffffff8113ce61>] internal_create_group+0x2a/0x170
  RSP <ffff880007b3fde8>
 ---[ end trace a123eb592043acad ]---

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Laurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block 2011-05-18T13:49:02+00:00 Linus Torvalds torvalds@linux-foundation.org 2011-05-18T13:49:02+00:00 a2b9c1f6208126e6df6c02428c501f8853685812 * 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: don't delay blk_run_queue_async scsi: remove performance regression due to async queue run blk-throttle: Use task_subsys_state() to determine a task's blkio_cgroup block: rescan partitions on invalidated devices on -ENOMEDIA too cdrom: always check_disk_change() on open block: unexport DISK_EVENT_MEDIA_CHANGE for legacy/fringe drivers 
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  block: don't delay blk_run_queue_async
  scsi: remove performance regression due to async queue run
  blk-throttle: Use task_subsys_state() to determine a task's blkio_cgroup
  block: rescan partitions on invalidated devices on -ENOMEDIA too
  cdrom: always check_disk_change() on open
  block: unexport DISK_EVENT_MEDIA_CHANGE for legacy/fringe drivers
rbd: fix split bio handling 2011-05-13T20:52:57+00:00 Yehuda Sadeh yehuda@hq.newdream.net 2011-05-13T20:52:56+00:00 1fec70932d867416ffe620dd17005f168cc84eb5 The rbd driver currently splits bios when they span an object boundary. However, the blk_end_request expects the completions to roll up the results in block device order, and the split rbd/ceph ops can complete in any order. This patch adds a struct rbd_req_coll to track completion of split requests and ensures that the results are passed back up to the block layer in order. This fixes errors where the file system gets completion of a read operation that spans an object boundary before the data has actually arrived. The bug is easily reproduced with iozone with a working set larger than available RAM. Reported-by: Fyodor Ustinov <ufm@ufm.su> Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net> 
The rbd driver currently splits bios when they span an object boundary.
However, the blk_end_request expects the completions to roll up the results
in block device order, and the split rbd/ceph ops can complete in any
order.  This patch adds a struct rbd_req_coll to track completion of split
requests and ensures that the results are passed back up to the block layer
in order.

This fixes errors where the file system gets completion of a read operation
that spans an object boundary before the data has actually arrived.  The
bug is easily reproduced with iozone with a working set larger than
available RAM.

Reported-by: Fyodor Ustinov <ufm@ufm.su>
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
rbd: fix leak of ops struct 2011-05-13T03:59:14+00:00 Sage Weil sage@newdream.net 2011-05-12T23:13:54+00:00 11f770027b5c0de16544f3ec82b5c6f9f8d5a644 The ops vector must be freed by the rbd_do_request caller. Signed-off-by: Sage Weil <sage@newdream.net> 
The ops vector must be freed by the rbd_do_request caller.

Signed-off-by: Sage Weil <sage@newdream.net>
libceph: fix ceph_osdc_alloc_request error checks 2011-05-03T16:28:13+00:00 Sage Weil sage@newdream.net 2011-05-03T16:23:36+00:00 4ad12621e442b7a072e81270808f617cb65c5672 ceph_osdc_alloc_request returns NULL on failure. Signed-off-by: Sage Weil <sage@newdream.net> 
ceph_osdc_alloc_request returns NULL on failure.

Signed-off-by: Sage Weil <sage@newdream.net>