linux-stable.git/drivers/block/virtio_blk.c, branch linux-6.2.y

virtio_blk: Fix signedness bug in virtblk_prep_rq()

2022-12-28T10:28:11+00:00

The virtblk_map_data() function returns negative error codes, however, the
'nents' field of vbr->sg_table is an unsigned int, which causes the error
handling not to work correctly.

Cc: stable@vger.kernel.org
Fixes: 0e9911fa768f ("virtio-blk: support mq_ops->queue_rqs()")
Signed-off-by: Rafael Mendonca 
Message-Id: <20221021204126.927603-1-rafaelmendsr@gmail.com>
Signed-off-by: Michael S. Tsirkin 
Reviewed-by: Stefano Garzarella 
Reviewed-by: Suwan Kim 
Reviewed-by: Stefan Hajnoczi 
Acked-by: Jason Wang

virtio_blk: use UINT_MAX instead of -1U

2022-12-28T10:28:10+00:00

We use UINT_MAX to limit max_discard_sectors in virtblk_probe,
we can use UINT_MAX to limit max_hw_sectors for consistencies.

No functional change intended.

Signed-off-by: Angus Chen 
Message-Id: <20221110030124.1986-1-angus.chen@jaguarmicro.com>
Signed-off-by: Michael S. Tsirkin 
Reviewed-by: Stefan Hajnoczi

virtio-blk: use a helper to handle request queuing errors

2022-12-28T10:09:47+00:00

Define a new helper function, virtblk_fail_to_queue(), to
clean up the error handling code in virtio_queue_rq().

Signed-off-by: Dmitry Fomichev 
Message-Id: <20221016034127.330942-2-dmitry.fomichev@wdc.com>
Signed-off-by: Michael S. Tsirkin

virtio-blk: replace ida_simple[get|remove] with ida_[alloc_range|free]

2022-11-30T21:23:34+00:00

ida_simple[get|remove] are deprecated, and are just wrappers to
ida_[alloc_range|free]. Replace ida_simple[get|remove] with their
corresponding counterparts.

No functional changes.

Signed-off-by: Pankaj Raghav 
Reviewed-by: Stefan Hajnoczi 
Link: https://lore.kernel.org/r/20221130123001.25473-1-p.raghav@samsung.com
Signed-off-by: Jens Axboe

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

2022-10-10T21:02:53+00:00

Pull virtio updates from Michael Tsirkin:

 - 9k mtu perf improvements

 - vdpa feature provisioning

 - virtio blk SECURE ERASE support

 - fixes and cleanups all over the place

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio_pci: don't try to use intxif pin is zero
  vDPA: conditionally read MTU and MAC in dev cfg space
  vDPA: fix spars cast warning in vdpa_dev_net_mq_config_fill
  vDPA: check virtio device features to detect MQ
  vDPA: check VIRTIO_NET_F_RSS for max_virtqueue_paris's presence
  vDPA: only report driver features if FEATURES_OK is set
  vDPA: allow userspace to query features of a vDPA device
  virtio_blk: add SECURE ERASE command support
  vp_vdpa: support feature provisioning
  vdpa_sim_net: support feature provisioning
  vdpa: device feature provisioning
  virtio-net: use mtu size as buffer length for big packets
  virtio-net: introduce and use helper function for guest gso support checks
  virtio: drop vp_legacy_set_queue_size
  virtio_ring: make vring_alloc_queue_packed prettier
  virtio_ring: split: Operators use unified style
  vhost: add __init/__exit annotations to module init/exit funcs

Merge tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linux

2022-10-07T16:19:14+00:00

Pull block updates from Jens Axboe:

 - NVMe pull requests via Christoph:
      - handle number of queue changes in the TCP and RDMA drivers
        (Daniel Wagner)
      - allow changing the number of queues in nvmet (Daniel Wagner)
      - also consider host_iface when checking ip options (Daniel
        Wagner)
      - don't map pages which can't come from HIGHMEM (Fabio M. De
        Francesco)
      - avoid unnecessary flush bios in nvmet (Guixin Liu)
      - shrink and better pack the nvme_iod structure (Keith Busch)
      - add comment for unaligned "fake" nqn (Linjun Bao)
      - print actual source IP address through sysfs "address" attr
        (Martin Belanger)
      - various cleanups (Jackie Liu, Wolfram Sang, Genjian Zhang)
      - handle effects after freeing the request (Keith Busch)
      - copy firmware_rev on each init (Keith Busch)
      - restrict management ioctls to admin (Keith Busch)
      - ensure subsystem reset is single threaded (Keith Busch)
      - report the actual number of tagset maps in nvme-pci (Keith
        Busch)
      - small fabrics authentication fixups (Christoph Hellwig)
      - add common code for tagset allocation and freeing (Christoph
        Hellwig)
      - stop using the request_queue in nvmet (Christoph Hellwig)
      - set min_align_mask before calculating max_hw_sectors (Rishabh
        Bhatnagar)
      - send a rediscover uevent when a persistent discovery controller
        reconnects (Sagi Grimberg)
      - misc nvmet-tcp fixes (Varun Prakash, zhenwei pi)

 - MD pull request via Song:
      - Various raid5 fix and clean up, by Logan Gunthorpe and David
        Sloan.
      - Raid10 performance optimization, by Yu Kuai.

 - sbitmap wakeup hang fixes (Hugh, Keith, Jan, Yu)

 - IO scheduler switching quisce fix (Keith)

 - s390/dasd block driver updates (Stefan)

 - support for recovery for the ublk driver (ZiyangZhang)

 - rnbd drivers fixes and updates (Guoqing, Santosh, ye, Christoph)

 - blk-mq and null_blk map fixes (Bart)

 - various bcache fixes (Coly, Jilin, Jules)

 - nbd signal hang fix (Shigeru)

 - block writeback throttling fix (Yu)

 - optimize the passthrough mapping handling (me)

 - prepare block cgroups to being gendisk based (Christoph)

 - get rid of an old PSI hack in the block layer, moving it to the
   callers instead where it belongs (Christoph)

 - blk-throttle fixes and cleanups (Yu)

 - misc fixes and cleanups (Liu Shixin, Liu Song, Miaohe, Pankaj,
   Ping-Xiang, Wolfram, Saurabh, Li Jinlin, Li Lei, Lin, Li zeming,
   Miaohe, Bart, Coly, Gaosheng

* tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linux: (162 commits)
  sbitmap: fix lockup while swapping
  block: add rationale for not using blk_mq_plug() when applicable
  block: adapt blk_mq_plug() to not plug for writes that require a zone lock
  s390/dasd: use blk_mq_alloc_disk
  blk-cgroup: don't update the blkg lookup hint in blkg_conf_prep
  nvmet: don't look at the request_queue in nvmet_bdev_set_limits
  nvmet: don't look at the request_queue in nvmet_bdev_zone_mgmt_emulate_all
  blk-mq: use quiesced elevator switch when reinitializing queues
  block: replace blk_queue_nowait with bdev_nowait
  nvme: remove nvme_ctrl_init_connect_q
  nvme-loop: use the tagset alloc/free helpers
  nvme-loop: store the generic nvme_ctrl in set->driver_data
  nvme-loop: initialize sqsize later
  nvme-fc: use the tagset alloc/free helpers
  nvme-fc: store the generic nvme_ctrl in set->driver_data
  nvme-fc: keep ctrl->sqsize in sync with opts->queue_size
  nvme-rdma: use the tagset alloc/free helpers
  nvme-rdma: store the generic nvme_ctrl in set->driver_data
  nvme-tcp: use the tagset alloc/free helpers
  nvme-tcp: store the generic nvme_ctrl in set->driver_data
  ...

virtio_blk: add SECURE ERASE command support

2022-10-07T13:32:41+00:00

Support for the VIRTIO_BLK_F_SECURE_ERASE VirtIO feature.

A device that offers this feature can receive VIRTIO_BLK_T_SECURE_ERASE
commands.

A device which supports this feature has the following fields in the
virtio config:

- max_secure_erase_sectors
- max_secure_erase_seg
- secure_erase_sector_alignment

max_secure_erase_sectors and secure_erase_sector_alignment are expressed
in 512-byte units.

Every secure erase command has the following fields:

- sectors: The starting offset in 512-byte units.
- num_sectors: The number of sectors.

Signed-off-by: Alvaro Karsz 
Message-Id: <20220921082729.2516779-1-alvaro.karsz@solid-run.com>
Signed-off-by: Michael S. Tsirkin 
Reviewed-by: Stefan Hajnoczi

virtio-blk: Fix WARN_ON_ONCE in virtio_queue_rq()

2022-09-27T22:30:49+00:00

If a request fails at virtio_queue_rqs(), it is inserted to requeue_list
and passed to virtio_queue_rq(). Then blk_mq_start_request() can be called
again at virtio_queue_rq() and trigger WARN_ON_ONCE like below trace because
request state was already set to MQ_RQ_IN_FLIGHT in virtio_queue_rqs()
despite the failure.

[    1.890468] ------------[ cut here ]------------
[    1.890776] WARNING: CPU: 2 PID: 122 at block/blk-mq.c:1143
blk_mq_start_request+0x8a/0xe0
[    1.891045] Modules linked in:
[    1.891250] CPU: 2 PID: 122 Comm: journal-offline Not tainted 5.19.0+ #44
[    1.891504] Hardware name: ChromiumOS crosvm, BIOS 0
[    1.891739] RIP: 0010:blk_mq_start_request+0x8a/0xe0
[    1.891961] Code: 12 80 74 22 48 8b 4b 10 8b 89 64 01 00 00 8b 53
20 83 fa ff 75 08 ba 00 00 00 80 0b 53 24 c1 e1 10 09 d1 89 48 34 5b
41 5e c3 <0f> 0b eb b8 65 8b 05 2b 39 b6 7e 89 c0 48 0f a3 05 39 77 5b
01 0f
[    1.892443] RSP: 0018:ffffc900002777b0 EFLAGS: 00010202
[    1.892673] RAX: 0000000000000000 RBX: ffff888004bc0000 RCX: 0000000000000000
[    1.892952] RDX: 0000000000000000 RSI: ffff888003d7c200 RDI: ffff888004bc0000
[    1.893228] RBP: 0000000000000000 R08: 0000000000000001 R09: ffff888004bc0100
[    1.893506] R10: ffffffffffffffff R11: ffffffff8185ca10 R12: ffff888004bc0000
[    1.893797] R13: ffffc90000277900 R14: ffff888004ab2340 R15: ffff888003d86e00
[    1.894060] FS:  00007ffa143a4640(0000) GS:ffff88807dd00000(0000)
knlGS:0000000000000000
[    1.894412] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    1.894682] CR2: 00005648577d9088 CR3: 00000000053da004 CR4: 0000000000170ee0
[    1.894953] Call Trace:
[    1.895139]  
[    1.895303]  virtblk_prep_rq+0x1e5/0x280
[    1.895509]  virtio_queue_rq+0x5c/0x310
[    1.895710]  ? virtqueue_add_sgs+0x95/0xb0
[    1.895905]  ? _raw_spin_unlock_irqrestore+0x16/0x30
[    1.896133]  ? virtio_queue_rqs+0x340/0x390
[    1.896453]  ? sbitmap_get+0xfa/0x220
[    1.896678]  __blk_mq_issue_directly+0x41/0x180
[    1.896906]  blk_mq_plug_issue_direct+0xd8/0x2c0
[    1.897115]  blk_mq_flush_plug_list+0x115/0x180
[    1.897342]  blk_add_rq_to_plug+0x51/0x130
[    1.897543]  blk_mq_submit_bio+0x3a1/0x570
[    1.897750]  submit_bio_noacct_nocheck+0x418/0x520
[    1.897985]  ? submit_bio_noacct+0x1e/0x260
[    1.897989]  ext4_bio_write_page+0x222/0x420
[    1.898000]  mpage_process_page_bufs+0x178/0x1c0
[    1.899451]  mpage_prepare_extent_to_map+0x2d2/0x440
[    1.899603]  ext4_writepages+0x495/0x1020
[    1.899733]  do_writepages+0xcb/0x220
[    1.899871]  ? __seccomp_filter+0x171/0x7e0
[    1.900006]  file_write_and_wait_range+0xcd/0xf0
[    1.900167]  ext4_sync_file+0x72/0x320
[    1.900308]  __x64_sys_fsync+0x66/0xa0
[    1.900449]  do_syscall_64+0x31/0x50
[    1.900595]  entry_SYSCALL_64_after_hwframe+0x63/0xcd
[    1.900747] RIP: 0033:0x7ffa16ec96ea
[    1.900883] Code: b8 4a 00 00 00 0f 05 48 3d 00 f0 ff ff 77 41 c3
48 83 ec 18 89 7c 24 0c e8 e3 02 f8 ff 8b 7c 24 0c 89 c2 b8 4a 00 00
00 0f 05 <48> 3d 00 f0 ff ff 77 36 89 d7 89 44 24 0c e8 43 03 f8 ff 8b
44 24
[    1.901302] RSP: 002b:00007ffa143a3ac0 EFLAGS: 00000293 ORIG_RAX:
000000000000004a
[    1.901499] RAX: ffffffffffffffda RBX: 0000560277ec6fe0 RCX: 00007ffa16ec96ea
[    1.901696] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000016
[    1.901884] RBP: 0000560277ec5910 R08: 0000000000000000 R09: 00007ffa143a4640
[    1.902082] R10: 00007ffa16e4d39e R11: 0000000000000293 R12: 00005602773f59e0
[    1.902459] R13: 0000000000000000 R14: 00007fffbfc007ff R15: 00007ffa13ba4000
[    1.902763]  
[    1.902877] ---[ end trace 0000000000000000 ]---

To avoid calling blk_mq_start_request() twice, This patch moves the
execution of blk_mq_start_request() to the end of virtblk_prep_rq().
And instead of requeuing failed request to plug list in the error path of
virtblk_add_req_batch(), it uses blk_mq_requeue_request() to change failed
request state to MQ_RQ_IDLE. Then virtblk can safely handle the request
on the next trial.

Fixes: 0e9911fa768f ("virtio-blk: support mq_ops->queue_rqs()")
Reported-by: Alexandre Courbot 
Tested-by: Alexandre Courbot 
Signed-off-by: Suwan Kim 
Message-Id: <20220830150153.12627-1-suwan.kim027@gmail.com>
Signed-off-by: Michael S. Tsirkin 
Acked-by: Stefan Hajnoczi 
Reviewed-by: Pankaj Raghav

block: Change the return type of blk_mq_map_queues() into void

2022-08-22T16:07:53+00:00

Since blk_mq_map_queues() and the .map_queues() callbacks always return 0,
change their return type into void. Most callers ignore the returned value
anyway.

Cc: Christoph Hellwig 
Cc: Jason Wang 
Cc: Keith Busch 
Cc: Martin K. Petersen 
Cc: Doug Gilbert 
Cc: Michael S. Tsirkin 
Signed-off-by: Bart Van Assche 
Reviewed-by: John Garry 
Acked-by: Md Haris Iqbal 
Reviewed-by: Sagi Grimberg 
Link: https://lore.kernel.org/r/20220815170043.19489-3-bvanassche@acm.org
[axboe: fold in fix from Bart]
Signed-off-by: Jens Axboe

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

2022-08-12T16:50:34+00:00

Pull virtio updates from Michael Tsirkin:

 - A huge patchset supporting vq resize using the new vq reset
   capability

 - Features, fixes, and cleanups all over the place

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (88 commits)
  vdpa/mlx5: Fix possible uninitialized return value
  vdpa_sim_blk: add support for discard and write-zeroes
  vdpa_sim_blk: add support for VIRTIO_BLK_T_FLUSH
  vdpa_sim_blk: make vdpasim_blk_check_range usable by other requests
  vdpa_sim_blk: check if sector is 0 for commands other than read or write
  vdpa_sim: Implement suspend vdpa op
  vhost-vdpa: uAPI to suspend the device
  vhost-vdpa: introduce SUSPEND backend feature bit
  vdpa: Add suspend operation
  virtio-blk: Avoid use-after-free on suspend/resume
  virtio_vdpa: support the arg sizes of find_vqs()
  vhost-vdpa: Call ida_simple_remove() when failed
  vDPA: fix 'cast to restricted le16' warnings in vdpa.c
  vDPA: !FEATURES_OK should not block querying device config space
  vDPA/ifcvf: support userspace to query features and MQ of a management device
  vDPA/ifcvf: get_config_size should return a value no greater than dev implementation
  vhost scsi: Allow user to control num virtqueues
  vhost-scsi: Fix max number of virtqueues
  vdpa/mlx5: Support different address spaces for control and data
  vdpa/mlx5: Implement susupend virtqueue callback
  ...