linux-stable.git/drivers/block/null_blk_main.c, branch linux-5.7.y

null_blk: don't allow discard for zoned mode

2020-05-21T14:47:28+00:00

Zoned block device specification do not define the behavior of
discard/trim command as this command is generally replaced by the reset
write pointer (zone reset) command. Emulate this in null_blk by making
zoned and discard options mutually exclusive.

Suggested-by: Damien Le Moal 
Signed-off-by: Chaitanya Kulkarni 
Signed-off-by: Jens Axboe

null_blk: Cleanup zoned device initialization

2020-04-23T15:35:09+00:00

Move all zoned mode related code from null_blk_main.c to
null_blk_zoned.c, avoiding an ugly #ifdef in the process.
Rename null_zone_init() into null_init_zoned_dev(), null_zone_exit()
into null_free_zoned_dev() and add the new function
null_register_zoned_dev() to finalize the zoned dev setup before
add_disk().

Signed-off-by: Damien Le Moal 
Reviewed-by: Christoph Hellwig 
Reviewed-by: Johannes Thumshirn 
Signed-off-by: Jens Axboe

null_blk: Fix zoned command handling

2020-04-23T15:35:09+00:00

For write operations issued to a null_blk device with zoned mode
enabled, the state and write pointer position of the zone targeted by
the command should be checked before badblocks and memory backing
are handled as the write may be first failed due to, for instance, a
sector position not aligned with the zone write pointer. This order of
checking for errors reflects more accuratly the behavior of physical
zoned devices.

Furthermore, the write pointer position of the target zone should be
incremented only and only if no errors are reported by badblocks and
memory backing handling.

To fix this, introduce the small helper function null_process_cmd()
which execute null_handle_badblocks() and null_handle_memory_backed()
and use this function in null_zone_write() to correctly handle write
requests to zoned null devices depending on the type and state of the
write target zone. Also call this function in null_handle_zoned() to
process read requests to zoned null devices.

null_process_cmd() is called directly from null_handle_cmd() for
regular null devices, resulting in no functional change for these type
of devices. To have symmetric names, the function null_handle_zoned()
is renamed to null_process_zoned_cmd().

Signed-off-by: Damien Le Moal 
Reviewed-by: Chaitanya Kulkarni 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Jens Axboe

Merge tag 'for-5.7/drivers-2020-03-29' of git://git.kernel.dk/linux-block

2020-03-30T18:43:51+00:00

Pull block driver updates from Jens Axboe:

 - floppy driver cleanup series from Willy

 - NVMe updates and fixes (Various)

 - null_blk trace improvements (Chaitanya)

 - bcache fixes (Coly)

 - md fixes (via Song)

 - loop block size change optimizations (Martijn)

 - scnprintf() use (Takashi)

* tag 'for-5.7/drivers-2020-03-29' of git://git.kernel.dk/linux-block: (81 commits)
  null_blk: add trace in null_blk_zoned.c
  null_blk: add tracepoint helpers for zoned mode
  block: add a zone condition debug helper
  nvme: cleanup namespace identifier reporting in nvme_init_ns_head
  nvme: rename __nvme_find_ns_head to nvme_find_ns_head
  nvme: refactor nvme_identify_ns_descs error handling
  nvme-tcp: Add warning on state change failure at nvme_tcp_setup_ctrl
  nvme-rdma: Add warning on state change failure at nvme_rdma_setup_ctrl
  nvme: Fix controller creation races with teardown flow
  nvme: Make nvme_uninit_ctrl symmetric to nvme_init_ctrl
  nvme: Fix ctrl use-after-free during sysfs deletion
  nvme-pci: Re-order nvme_pci_free_ctrl
  nvme: Remove unused return code from nvme_delete_ctrl_sync
  nvme: Use nvme_state_terminal helper
  nvme: release ida resources
  nvme: Add compat_ioctl handler for NVME_IOCTL_SUBMIT_IO
  nvmet-tcp: optimize tcp stack TX when data digest is used
  nvme-fabrics: Use scnprintf() for avoiding potential buffer overflow
  nvme-multipath: do not reset on unknown status
  nvmet-rdma: allocate RW ctxs according to mdts
  ...

block: simplify queue allocation

2020-03-27T16:23:43+00:00

Current make_request based drivers use either blk_alloc_queue_node or
blk_alloc_queue to allocate a queue, and then set up the make_request_fn
function pointer and a few parameters using the blk_queue_make_request
helper.  Simplify this by passing the make_request pointer to
blk_alloc_queue, and while at it merge the _node variant into the main
helper by always passing a node_id, and remove the superfluous gfp_mask
parameter.  A lower-level __blk_alloc_queue is kept for the blk-mq case.

Signed-off-by: Christoph Hellwig 
Signed-off-by: Jens Axboe

null_blk: use blk_mq_init_queue_data

2020-03-27T16:23:43+00:00

Use the new blk_mq_init_queue_data instead of open coding the queue
allocation and initialization.

Reviewed-by: Johannes Thumshirn 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Jens Axboe

null_blk: describe the usage of fault injection param

2020-03-13T00:54:28+00:00

As null_blk is a very good start point to test block layer, this patch
adds description and comments to 'timeout', 'requeue' and 'init_hctx' to
explain how to use fault injection with null_blk.

The nvme has similar with nvme_core.fail_request in the form of comment.

Reviewed-by: Chaitanya Kulkarni 
Signed-off-by: Dongli Zhang 
Signed-off-by: Jens Axboe

null_blk: fix spurious IO errors after failed past-wp access

2020-03-12T15:10:03+00:00

Steps to reproduce:

	BLKRESETZONE zone 0

	// force EIO
	pwrite(fd, buf, 4096, 4096);

	[issue more IO including zone ioctls]

It will start failing randomly including IO to unrelated zones because of
->error "reuse". Trigger can be partition detection as well if test is not
run immediately which is even more entertaining.

The fix is of course to clear ->error where necessary.

Reviewed-by: Christoph Hellwig 
Signed-off-by: Alexey Dobriyan (SK hynix) 
Signed-off-by: Jens Axboe

null_blk: Add support for init_hctx() fault injection

2020-03-10T13:09:59+00:00

This makes it possible to test the error path in blk_mq_realloc_hw_ctxs()
and also several error paths in null_blk.

Signed-off-by: Bart Van Assche 
Cc: Johannes Thumshirn 
Cc: Hannes Reinecke 
Cc: Ming Lei 
Cc: Christoph Hellwig 
Signed-off-by: Jens Axboe

null_blk: Handle null_add_dev() failures properly

2020-03-10T13:09:59+00:00

If null_add_dev() fails then null_del_dev() is called with a NULL argument.
Make null_del_dev() handle this scenario correctly. This patch fixes the
following KASAN complaint:

null-ptr-deref in null_del_dev+0x28/0x280 [null_blk]
Read of size 8 at addr 0000000000000000 by task find/1062

Call Trace:
 dump_stack+0xa5/0xe6
 __kasan_report.cold+0x65/0x99
 kasan_report+0x16/0x20
 __asan_load8+0x58/0x90
 null_del_dev+0x28/0x280 [null_blk]
 nullb_group_drop_item+0x7e/0xa0 [null_blk]
 client_drop_item+0x53/0x80 [configfs]
 configfs_rmdir+0x395/0x4e0 [configfs]
 vfs_rmdir+0xb6/0x220
 do_rmdir+0x238/0x2c0
 __x64_sys_unlinkat+0x75/0x90
 do_syscall_64+0x6f/0x2f0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Signed-off-by: Bart Van Assche 
Reviewed-by: Chaitanya Kulkarni 
Cc: Johannes Thumshirn 
Cc: Hannes Reinecke 
Cc: Ming Lei 
Cc: Christoph Hellwig 
Signed-off-by: Jens Axboe