linux-stable.git/drivers/block/nbd.c, branch v5.4.78

nbd: fix a block_device refcount leak in nbd_release

2020-11-18T18:20:27+00:00

[ Upstream commit 2bd645b2d3f0bacadaa6037f067538e1cd4e42ef ]

bdget_disk needs to be paired with bdput to not leak a reference
on the block device inode.

Fixes: 08ba91ee6e2c ("nbd: Add the nbd NBD_DISCONNECT_ON_CLOSE config flag.")
Signed-off-by: Christoph Hellwig 
Reviewed-by: Josef Bacik 
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

nbd: don't update block size after device is started

2020-11-18T18:20:15+00:00

[ Upstream commit b40813ddcd6bf9f01d020804e4cb8febc480b9e4 ]

Mounted NBD device can be resized, one use case is rbd-nbd.

Fix the issue by setting up default block size, then not touch it
in nbd_size_update() any more. This kind of usage is aligned with loop
which has same use case too.

Cc: stable@vger.kernel.org
Fixes: c8a83a6b54d0 ("nbd: Use set_blocksize() to set device blocksize")
Reported-by: lining 
Signed-off-by: Ming Lei 
Cc: Josef Bacik 
Cc: Jan Kara 
Tested-by: lining 
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

nbd: make the config put is called before the notifying the waiter

2020-11-05T10:43:22+00:00

[ Upstream commit 87aac3a80af5cbad93e63250e8a1e19095ba0d30 ]

There has one race case for ceph's rbd-nbd tool. When do mapping
it may fail with EBUSY from ioctl(nbd, NBD_DO_IT), but actually
the nbd device has already unmaped.

It dues to if just after the wake_up(), the recv_work() is scheduled
out and defers calling the nbd_config_put(), though the map process
has exited the "nbd->recv_task" is not cleared.

Signed-off-by: Xiubo Li 
Reviewed-by: Josef Bacik 
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

nbd: restore default timeout when setting it to zero

2020-09-09T17:12:22+00:00

[ Upstream commit acb19e17c5134dd78668c429ecba5b481f038e6a ]

If we configured io timeout of nbd0 to 100s. Later after we
finished using it, we configured nbd0 again and set the io
timeout to 0. We expect it would timeout after 30 seconds
and keep retry. But in fact we could not change the timeout
when we set it to 0. the timeout is still the original 100s.

So change the timeout to default 30s when we set it to zero.
It also behaves same as commit 2da22da57348 ("nbd: fix zero
cmd timeout handling v2").

It becomes more important if we were reconfigure a nbd device
and the io timeout it set to zero. Because it could take 30s
to detect the new socket and thus io could be completed more
quickly compared to 100s.

Signed-off-by: Hou Pu 
Reviewed-by: Josef Bacik 
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

nbd: Fix memory leak in nbd_add_socket

2020-07-16T06:16:40+00:00

[ Upstream commit 579dd91ab3a5446b148e7f179b6596b270dace46 ]

When adding first socket to nbd, if nsock's allocation failed, the data
structure member "config->socks" was reallocated, but the data structure
member "config->num_connections" was not updated. A memory leak will occur
then because the function "nbd_config_put" will free "config->socks" only
when "config->num_connections" is not zero.

Fixes: 03bf73c315ed ("nbd: prevent memory leak")
Reported-by: syzbot+934037347002901b8d2a@syzkaller.appspotmail.com
Signed-off-by: Zheng Bin 
Reviewed-by: Eric Biggers 
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

nbd: add a flush_workqueue in nbd_start_device

2020-02-24T07:36:31+00:00

[ Upstream commit 5c0dd228b5fc30a3b732c7ae2657e0161ec7ed80 ]

When kzalloc fail, may cause trying to destroy the
workqueue from inside the workqueue.

If num_connections is m (2 < m), and NO.1 ~ NO.n
(1 < n < m) kzalloc are successful. The NO.(n + 1)
failed. Then, nbd_start_device will return ENOMEM
to nbd_start_device_ioctl, and nbd_start_device_ioctl
will return immediately without running flush_workqueue.
However, we still have n recv threads. If nbd_release
run first, recv threads may have to drop the last
config_refs and try to destroy the workqueue from
inside the workqueue.

To fix it, add a flush_workqueue in nbd_start_device.

Fixes: e9e006f5fcf2 ("nbd: fix max number of supported devs")
Signed-off-by: Sun Ke 
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

nbd: fix shutdown and recv work deadlock v2

2019-12-31T15:46:34+00:00

commit 1c05839aa973cfae8c3db964a21f9c0eef8fcc21 upstream.

This fixes a regression added with:

commit e9e006f5fcf2bab59149cb38a48a4817c1b538b4
Author: Mike Christie 
Date:   Sun Aug 4 14:10:06 2019 -0500

    nbd: fix max number of supported devs

where we can deadlock during device shutdown. The problem occurs if
the recv_work's nbd_config_put occurs after nbd_start_device_ioctl has
returned and the userspace app has droppped its reference via closing
the device and running nbd_release. The recv_work nbd_config_put call
would then drop the refcount to zero and try to destroy the config which
would try to do destroy_workqueue from the recv work.

This patch just has nbd_start_device_ioctl do a flush_workqueue when it
wakes so we know after the ioctl returns running works have exited. This
also fixes a possible race where we could try to reuse the device while
old recv_works are still running.

Cc: stable@vger.kernel.org
Fixes: e9e006f5fcf2 ("nbd: fix max number of supported devs")
Signed-off-by: Mike Christie 
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

nbd: prevent memory leak

2019-11-29T09:09:47+00:00

commit 03bf73c315edca28f47451913177e14cd040a216 upstream.

In nbd_add_socket when krealloc succeeds, if nsock's allocation fail the
reallocted memory is leak. The correct behaviour should be assigning the
reallocted memory to config->socks right after success.

Reviewed-by: Josef Bacik 
Signed-off-by: Navid Emamdoost 
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

nbd:fix memory leak in nbd_get_socket()

2019-11-19T16:23:26+00:00

Before returning NULL, put the sock first.

Cc: stable@vger.kernel.org
Fixes: cf1b2326b734 ("nbd: verify socket is supported during setup")
Reviewed-by: Josef Bacik 
Reviewed-by: Mike Christie 
Signed-off-by: Sun Ke 
Signed-off-by: Jens Axboe

nbd: verify socket is supported during setup

2019-10-25T20:37:21+00:00

nbd requires socket families to support the shutdown method so the nbd
recv workqueue can be woken up from its sock_recvmsg call. If the socket
does not support the callout we will leave recv works running or get hangs
later when the device or module is removed.

This adds a check during socket connection/reconnection to make sure the
socket being passed in supports the needed callout.

Reported-by: syzbot+24c12fa8d218ed26011a@syzkaller.appspotmail.com
Fixes: e9e006f5fcf2 ("nbd: fix max number of supported devs")
Tested-by: Richard W.M. Jones 
Signed-off-by: Mike Christie 
Signed-off-by: Jens Axboe