linux-stable.git/drivers/block/floppy.c, branch linux-5.17.y

floppy: use a statically allocated error counter

2022-05-25T07:58:56+00:00

commit f71f01394f742fc4558b3f9f4c7ef4c4cf3b07c8 upstream.

Interrupt handler bad_flp_intr() may cause a UAF on the recently freed
request just to increment the error count.  There's no point keeping
that one in the request anyway, and since the interrupt handler uses a
static pointer to the error which cannot be kept in sync with the
pending request, better make it use a static error counter that's reset
for each new request.  This reset now happens when entering
redo_fd_request() for a new request via set_next_request().

One initial concern about a single error counter was that errors on one
floppy drive could be reported on another one, but this problem is not
real given that the driver uses a single drive at a time, as that
PC-compatible controllers also have this limitation by using shared
signals.  As such the error count is always for the "current" drive.

Reported-by: Minh Yuan 
Suggested-by: Linus Torvalds 
Tested-by: Denis Efremov 
Signed-off-by: Willy Tarreau 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

floppy: disable FDRAWCMD by default

2022-05-09T07:16:11+00:00

commit 233087ca063686964a53c829d547c7571e3f67bf upstream.

Minh Yuan reported a concurrency use-after-free issue in the floppy code
between raw_cmd_ioctl and seek_interrupt.

[ It turns out this has been around, and that others have reported the
  KASAN splats over the years, but Minh Yuan had a reproducer for it and
  so gets primary credit for reporting it for this fix   - Linus ]

The problem is, this driver tends to break very easily and nowadays,
nobody is expected to use FDRAWCMD anyway since it was used to
manipulate non-standard formats.  The risk of breaking the driver is
higher than the risk presented by this race, and accessing the device
requires privileges anyway.

Let's just add a config option to completely disable this ioctl and
leave it disabled by default.  Distros shouldn't use it, and only those
running on antique hardware might need to enable it.

Link: https://lore.kernel.org/all/000000000000b71cdd05d703f6bf@google.com/
Link: https://lore.kernel.org/lkml/CAKcFiNC=MfYVW-Jt9A3=FPJpTwCD2PL_ULNCpsCVE5s8ZeBQgQ@mail.gmail.com
Link: https://lore.kernel.org/all/CAEAjamu1FRhz6StCe_55XY5s389ZP_xmCF69k987En+1z53=eg@mail.gmail.com
Reported-by: Minh Yuan 
Reported-by: syzbot+8e8958586909d62b6840@syzkaller.appspotmail.com
Reported-by: cruise k 
Reported-by: Kyungtae Kim 
Suggested-by: Linus Torvalds 
Tested-by: Denis Efremov 
Signed-off-by: Willy Tarreau 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

floppy: Add max size check for user space request

2021-12-03T13:32:40+00:00

We need to check the max request size that is from user space before
allocating pages. If the request size exceeds the limit, return -EINVAL.
This check can avoid the warning below from page allocator.

WARNING: CPU: 3 PID: 16525 at mm/page_alloc.c:5344 current_gfp_context include/linux/sched/mm.h:195 [inline]
WARNING: CPU: 3 PID: 16525 at mm/page_alloc.c:5344 __alloc_pages+0x45d/0x500 mm/page_alloc.c:5356
Modules linked in:
CPU: 3 PID: 16525 Comm: syz-executor.3 Not tainted 5.15.0-syzkaller #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
RIP: 0010:__alloc_pages+0x45d/0x500 mm/page_alloc.c:5344
Code: be c9 00 00 00 48 c7 c7 20 4a 97 89 c6 05 62 32 a7 0b 01 e8 74 9a 42 07 e9 6a ff ff ff 0f 0b e9 a0 fd ff ff 40 80 e5 3f eb 88 <0f> 0b e9 18 ff ff ff 4c 89 ef 44 89 e6 45 31 ed e8 1e 76 ff ff e9
RSP: 0018:ffffc90023b87850 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 1ffff92004770f0b RCX: dffffc0000000000
RDX: 0000000000000000 RSI: 0000000000000033 RDI: 0000000000010cc1
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001
R10: ffffffff81bb4686 R11: 0000000000000001 R12: ffffffff902c1960
R13: 0000000000000033 R14: 0000000000000000 R15: ffff88804cf64a30
FS:  0000000000000000(0000) GS:ffff88802cd00000(0063) knlGS:00000000f44b4b40
CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
CR2: 000000002c921000 CR3: 000000004f507000 CR4: 0000000000150ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 
 alloc_pages+0x1a7/0x300 mm/mempolicy.c:2191
 __get_free_pages+0x8/0x40 mm/page_alloc.c:5418
 raw_cmd_copyin drivers/block/floppy.c:3113 [inline]
 raw_cmd_ioctl drivers/block/floppy.c:3160 [inline]
 fd_locked_ioctl+0x12e5/0x2820 drivers/block/floppy.c:3528
 fd_ioctl drivers/block/floppy.c:3555 [inline]
 fd_compat_ioctl+0x891/0x1b60 drivers/block/floppy.c:3869
 compat_blkdev_ioctl+0x3b8/0x810 block/ioctl.c:662
 __do_compat_sys_ioctl+0x1c7/0x290 fs/ioctl.c:972
 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline]
 __do_fast_syscall_32+0x65/0xf0 arch/x86/entry/common.c:178
 do_fast_syscall_32+0x2f/0x70 arch/x86/entry/common.c:203
 entry_SYSENTER_compat_after_hwframe+0x4d/0x5c

Reported-by: syzbot+23a02c7df2cf2bc93fa2@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20211116131033.27685-1-sxwjean@me.com
Signed-off-by: Xiongwei Song 
Signed-off-by: Denis Efremov 
Signed-off-by: Jens Axboe

floppy: Fix hang in watchdog when disk is ejected

2021-12-03T13:32:40+00:00

When the watchdog detects a disk change, it calls cancel_activity(),
which in turn tries to cancel the fd_timer delayed work.

In the above scenario, fd_timer_fn is set to fd_watchdog(), meaning
it is trying to cancel its own work.
This results in a hang as cancel_delayed_work_sync() is waiting for the
watchdog (itself) to return, which never happens.

This can be reproduced relatively consistently by attempting to read a
broken floppy, and ejecting it while IO is being attempted and retried.

To resolve this, this patch calls cancel_delayed_work() instead, which
cancels the work without waiting for the watchdog to return and finish.

Before this regression was introduced, the code in this section used
del_timer(), and not del_timer_sync() to delete the watchdog timer.

Link: https://lore.kernel.org/r/399e486c-6540-db27-76aa-7a271b061f76@tasossah.com
Fixes: 070ad7e793dc ("floppy: convert to delayed work and single-thread wq")
Signed-off-by: Tasos Sahanidis 
Signed-off-by: Denis Efremov 
Signed-off-by: Jens Axboe

block: remove the ->rq_disk field in struct request

2021-11-29T13:41:29+00:00

Just use the disk attached to the request_queue instead.

Signed-off-by: Christoph Hellwig 
Reviewed-by: Chaitanya Kulkarni 
Reviewed-by: Martin K. Petersen 
Link: https://lore.kernel.org/r/20211126121802.2090656-4-hch@lst.de
Signed-off-by: Jens Axboe

block: remove GENHD_FL_EXT_DEVT

2021-11-29T13:38:35+00:00

All modern drivers can support extra partitions using the extended
dev_t.  In fact except for the ioctl method drivers never even see
partitions in normal operation.

So remove the GENHD_FL_EXT_DEVT and allow extra partitions for all
block devices that do support partitions, and require those that
do not support partitions to explicit disallow them using
GENHD_FL_NO_PART.

Signed-off-by: Christoph Hellwig 
Link: https://lore.kernel.org/r/20211122130625.1136848-12-hch@lst.de
Signed-off-by: Jens Axboe

floppy: address add_disk() error handling on probe

2021-11-04T11:48:50+00:00

We need to cleanup resources on the probe() callback registered
with __register_blkdev(), now that add_disk() error handling is
supported. Address this.

Reviewed-by: Christoph Hellwig 
Signed-off-by: Luis Chamberlain 
Link: https://lore.kernel.org/r/20211103230437.1639990-14-mcgrof@kernel.org
Signed-off-by: Jens Axboe

floppy: add error handling support for add_disk()

2021-10-18T20:41:37+00:00

We never checked for errors on add_disk() as this function
returned void. Now that this is fixed, use the shiny new
error handling.

Signed-off-by: Luis Chamberlain 
Link: https://lore.kernel.org/r/20210927220302.1073499-6-mcgrof@kernel.org
Signed-off-by: Jens Axboe

floppy: fix calling platform_device_unregister() on invalid drives

2021-10-18T20:41:37+00:00

platform_device_unregister() should only be called when
a respective platform_device_register() is called. However
the floppy driver currently allows failures when registring
a drive and a bail out could easily cause an invalid call
to platform_device_unregister() where it was not intended.

Fix this by adding a bool to keep track of when the platform
device was registered for a drive.

This does not fix any known panic / bug. This issue was found
through code inspection while preparing the driver to use the
up and coming support for device_add_disk() error handling.
From what I can tell from code inspection, chances of this
ever happening should be insanely small, perhaps OOM.

Signed-off-by: Luis Chamberlain 
Link: https://lore.kernel.org/r/20210927220302.1073499-5-mcgrof@kernel.org
Signed-off-by: Jens Axboe

floppy: use blk_cleanup_disk()

2021-10-18T20:41:37+00:00

Use the blk_cleanup_queue() followed by put_disk() can be
replaced with blk_cleanup_disk(). No need for two separate
loops.

Signed-off-by: Luis Chamberlain 
Link: https://lore.kernel.org/r/20210927220302.1073499-4-mcgrof@kernel.org
Signed-off-by: Jens Axboe