<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/drivers/bcma, branch v3.2.99</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>bcma: use (get|put)_device when probing/removing device driver</title>
<updated>2017-06-05T20:13:45+00:00</updated>
<author>
<name>Rafał Miłecki</name>
<email>rafal@milecki.pl</email>
</author>
<published>2017-01-28T13:31:22+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=bd5e542d7fb91f93d97a380c55e392f0125862b5'/>
<id>bd5e542d7fb91f93d97a380c55e392f0125862b5</id>
<content type='text'>
commit a971df0b9d04674e325346c17de9a895425ca5e1 upstream.

This allows tracking device state and e.g. makes devm work as expected.

Signed-off-by: Rafał Miłecki &lt;rafal@milecki.pl&gt;
Signed-off-by: Kalle Valo &lt;kvalo@codeaurora.org&gt;
Signed-off-by: Ben Hutchings &lt;ben@decadent.org.uk&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit a971df0b9d04674e325346c17de9a895425ca5e1 upstream.

This allows tracking device state and e.g. makes devm work as expected.

Signed-off-by: Rafał Miłecki &lt;rafal@milecki.pl&gt;
Signed-off-by: Kalle Valo &lt;kvalo@codeaurora.org&gt;
Signed-off-by: Ben Hutchings &lt;ben@decadent.org.uk&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>x86/quirks: Add early quirk to reset Apple AirPort card</title>
<updated>2016-11-20T01:01:25+00:00</updated>
<author>
<name>Lukas Wunner</name>
<email>lukas@wunner.de</email>
</author>
<published>2016-06-12T10:31:53+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=319c66dd0f3a699dfb7b530728f3febb944dd7b5'/>
<id>319c66dd0f3a699dfb7b530728f3febb944dd7b5</id>
<content type='text'>
commit abb2bafd295fe962bbadc329dbfb2146457283ac upstream.

The EFI firmware on Macs contains a full-fledged network stack for
downloading OS X images from osrecovery.apple.com. Unfortunately
on Macs introduced 2011 and 2012, EFI brings up the Broadcom 4331
wireless card on every boot and leaves it enabled even after
ExitBootServices has been called. The card continues to assert its IRQ
line, causing spurious interrupts if the IRQ is shared. It also corrupts
memory by DMAing received packets, allowing for remote code execution
over the air. This only stops when a driver is loaded for the wireless
card, which may be never if the driver is not installed or blacklisted.

The issue seems to be constrained to the Broadcom 4331. Chris Milsted
has verified that the newer Broadcom 4360 built into the MacBookPro11,3
(2013/2014) does not exhibit this behaviour. The chances that Apple will
ever supply a firmware fix for the older machines appear to be zero.

The solution is to reset the card on boot by writing to a reset bit in
its mmio space. This must be done as an early quirk and not as a plain
vanilla PCI quirk to successfully combat memory corruption by DMAed
packets: Matthew Garrett found out in 2012 that the packets are written
to EfiBootServicesData memory (http://mjg59.dreamwidth.org/11235.html).
This type of memory is made available to the page allocator by
efi_free_boot_services(). Plain vanilla PCI quirks run much later, in
subsys initcall level. In-between a time window would be open for memory
corruption. Random crashes occurring in this time window and attributed
to DMAed packets have indeed been observed in the wild by Chris
Bainbridge.

When Matthew Garrett analyzed the memory corruption issue in 2012, he
sought to fix it with a grub quirk which transitions the card to D3hot:
http://git.savannah.gnu.org/cgit/grub.git/commit/?id=9d34bb85da56

This approach does not help users with other bootloaders and while it
may prevent DMAed packets, it does not cure the spurious interrupts
emanating from the card. Unfortunately the card's mmio space is
inaccessible in D3hot, so to reset it, we have to undo the effect of
Matthew's grub patch and transition the card back to D0.

Note that the quirk takes a few shortcuts to reduce the amount of code:
The size of BAR 0 and the location of the PM capability is identical
on all affected machines and therefore hardcoded. Only the address of
BAR 0 differs between models. Also, it is assumed that the BCMA core
currently mapped is the 802.11 core. The EFI driver seems to always take
care of this.

Michael Büsch, Bjorn Helgaas and Matt Fleming contributed feedback
towards finding the best solution to this problem.

The following should be a comprehensive list of affected models:
    iMac13,1        2012  21.5"       [Root Port 00:1c.3 = 8086:1e16]
    iMac13,2        2012  27"         [Root Port 00:1c.3 = 8086:1e16]
    Macmini5,1      2011  i5 2.3 GHz  [Root Port 00:1c.1 = 8086:1c12]
    Macmini5,2      2011  i5 2.5 GHz  [Root Port 00:1c.1 = 8086:1c12]
    Macmini5,3      2011  i7 2.0 GHz  [Root Port 00:1c.1 = 8086:1c12]
    Macmini6,1      2012  i5 2.5 GHz  [Root Port 00:1c.1 = 8086:1e12]
    Macmini6,2      2012  i7 2.3 GHz  [Root Port 00:1c.1 = 8086:1e12]
    MacBookPro8,1   2011  13"         [Root Port 00:1c.1 = 8086:1c12]
    MacBookPro8,2   2011  15"         [Root Port 00:1c.1 = 8086:1c12]
    MacBookPro8,3   2011  17"         [Root Port 00:1c.1 = 8086:1c12]
    MacBookPro9,1   2012  15"         [Root Port 00:1c.1 = 8086:1e12]
    MacBookPro9,2   2012  13"         [Root Port 00:1c.1 = 8086:1e12]
    MacBookPro10,1  2012  15"         [Root Port 00:1c.1 = 8086:1e12]
    MacBookPro10,2  2012  13"         [Root Port 00:1c.1 = 8086:1e12]

For posterity, spurious interrupts caused by the Broadcom 4331 wireless
card resulted in splats like this (stacktrace omitted):

    irq 17: nobody cared (try booting with the "irqpoll" option)
    handlers:
    [&lt;ffffffff81374370&gt;] pcie_isr
    [&lt;ffffffffc0704550&gt;] sdhci_irq [sdhci] threaded [&lt;ffffffffc07013c0&gt;] sdhci_thread_irq [sdhci]
    [&lt;ffffffffc0a0b960&gt;] azx_interrupt [snd_hda_codec]
    Disabling IRQ #17

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=79301
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=111781
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=728916
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=895951#c16
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1009819
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1098621
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1149632#c5
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1279130
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1332732
Tested-by: Konstantin Simanov &lt;k.simanov@stlk.ru&gt;        # [MacBookPro8,1]
Tested-by: Lukas Wunner &lt;lukas@wunner.de&gt;                # [MacBookPro9,1]
Tested-by: Bryan Paradis &lt;bryan.paradis@gmail.com&gt;       # [MacBookPro9,2]
Tested-by: Andrew Worsley &lt;amworsley@gmail.com&gt;          # [MacBookPro10,1]
Tested-by: Chris Bainbridge &lt;chris.bainbridge@gmail.com&gt; # [MacBookPro10,2]
Signed-off-by: Lukas Wunner &lt;lukas@wunner.de&gt;
Acked-by: Rafał Miłecki &lt;zajec5@gmail.com&gt;
Acked-by: Matt Fleming &lt;matt@codeblueprint.co.uk&gt;
Cc: Andy Lutomirski &lt;luto@kernel.org&gt;
Cc: Bjorn Helgaas &lt;bhelgaas@google.com&gt;
Cc: Borislav Petkov &lt;bp@alien8.de&gt;
Cc: Brian Gerst &lt;brgerst@gmail.com&gt;
Cc: Chris Milsted &lt;cmilsted@redhat.com&gt;
Cc: Denys Vlasenko &lt;dvlasenk@redhat.com&gt;
Cc: H. Peter Anvin &lt;hpa@zytor.com&gt;
Cc: Josh Poimboeuf &lt;jpoimboe@redhat.com&gt;
Cc: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Cc: Matthew Garrett &lt;mjg59@srcf.ucam.org&gt;
Cc: Michael Buesch &lt;m@bues.ch&gt;
Cc: Peter Zijlstra &lt;peterz@infradead.org&gt;
Cc: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Cc: Yinghai Lu &lt;yinghai@kernel.org&gt;
Cc: b43-dev@lists.infradead.org
Cc: linux-pci@vger.kernel.org
Cc: linux-wireless@vger.kernel.org
Link: http://lkml.kernel.org/r/48d0972ac82a53d460e5fce77a07b2560db95203.1465690253.git.lukas@wunner.de
[ Did minor readability edits. ]
Signed-off-by: Ingo Molnar &lt;mingo@kernel.org&gt;
[bwh: Backported to 3.2:
 - early_ioremap() is declared in &lt;asm/io.h&gt; not &lt;asm/early_ioremap.h&gt;
 - Add definition of BCMA_RESET_ST
 - Adjust context]
Signed-off-by: Ben Hutchings &lt;ben@decadent.org.uk&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit abb2bafd295fe962bbadc329dbfb2146457283ac upstream.

The EFI firmware on Macs contains a full-fledged network stack for
downloading OS X images from osrecovery.apple.com. Unfortunately
on Macs introduced 2011 and 2012, EFI brings up the Broadcom 4331
wireless card on every boot and leaves it enabled even after
ExitBootServices has been called. The card continues to assert its IRQ
line, causing spurious interrupts if the IRQ is shared. It also corrupts
memory by DMAing received packets, allowing for remote code execution
over the air. This only stops when a driver is loaded for the wireless
card, which may be never if the driver is not installed or blacklisted.

The issue seems to be constrained to the Broadcom 4331. Chris Milsted
has verified that the newer Broadcom 4360 built into the MacBookPro11,3
(2013/2014) does not exhibit this behaviour. The chances that Apple will
ever supply a firmware fix for the older machines appear to be zero.

The solution is to reset the card on boot by writing to a reset bit in
its mmio space. This must be done as an early quirk and not as a plain
vanilla PCI quirk to successfully combat memory corruption by DMAed
packets: Matthew Garrett found out in 2012 that the packets are written
to EfiBootServicesData memory (http://mjg59.dreamwidth.org/11235.html).
This type of memory is made available to the page allocator by
efi_free_boot_services(). Plain vanilla PCI quirks run much later, in
subsys initcall level. In-between a time window would be open for memory
corruption. Random crashes occurring in this time window and attributed
to DMAed packets have indeed been observed in the wild by Chris
Bainbridge.

When Matthew Garrett analyzed the memory corruption issue in 2012, he
sought to fix it with a grub quirk which transitions the card to D3hot:
http://git.savannah.gnu.org/cgit/grub.git/commit/?id=9d34bb85da56

This approach does not help users with other bootloaders and while it
may prevent DMAed packets, it does not cure the spurious interrupts
emanating from the card. Unfortunately the card's mmio space is
inaccessible in D3hot, so to reset it, we have to undo the effect of
Matthew's grub patch and transition the card back to D0.

Note that the quirk takes a few shortcuts to reduce the amount of code:
The size of BAR 0 and the location of the PM capability is identical
on all affected machines and therefore hardcoded. Only the address of
BAR 0 differs between models. Also, it is assumed that the BCMA core
currently mapped is the 802.11 core. The EFI driver seems to always take
care of this.

Michael Büsch, Bjorn Helgaas and Matt Fleming contributed feedback
towards finding the best solution to this problem.

The following should be a comprehensive list of affected models:
    iMac13,1        2012  21.5"       [Root Port 00:1c.3 = 8086:1e16]
    iMac13,2        2012  27"         [Root Port 00:1c.3 = 8086:1e16]
    Macmini5,1      2011  i5 2.3 GHz  [Root Port 00:1c.1 = 8086:1c12]
    Macmini5,2      2011  i5 2.5 GHz  [Root Port 00:1c.1 = 8086:1c12]
    Macmini5,3      2011  i7 2.0 GHz  [Root Port 00:1c.1 = 8086:1c12]
    Macmini6,1      2012  i5 2.5 GHz  [Root Port 00:1c.1 = 8086:1e12]
    Macmini6,2      2012  i7 2.3 GHz  [Root Port 00:1c.1 = 8086:1e12]
    MacBookPro8,1   2011  13"         [Root Port 00:1c.1 = 8086:1c12]
    MacBookPro8,2   2011  15"         [Root Port 00:1c.1 = 8086:1c12]
    MacBookPro8,3   2011  17"         [Root Port 00:1c.1 = 8086:1c12]
    MacBookPro9,1   2012  15"         [Root Port 00:1c.1 = 8086:1e12]
    MacBookPro9,2   2012  13"         [Root Port 00:1c.1 = 8086:1e12]
    MacBookPro10,1  2012  15"         [Root Port 00:1c.1 = 8086:1e12]
    MacBookPro10,2  2012  13"         [Root Port 00:1c.1 = 8086:1e12]

For posterity, spurious interrupts caused by the Broadcom 4331 wireless
card resulted in splats like this (stacktrace omitted):

    irq 17: nobody cared (try booting with the "irqpoll" option)
    handlers:
    [&lt;ffffffff81374370&gt;] pcie_isr
    [&lt;ffffffffc0704550&gt;] sdhci_irq [sdhci] threaded [&lt;ffffffffc07013c0&gt;] sdhci_thread_irq [sdhci]
    [&lt;ffffffffc0a0b960&gt;] azx_interrupt [snd_hda_codec]
    Disabling IRQ #17

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=79301
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=111781
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=728916
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=895951#c16
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1009819
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1098621
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1149632#c5
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1279130
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1332732
Tested-by: Konstantin Simanov &lt;k.simanov@stlk.ru&gt;        # [MacBookPro8,1]
Tested-by: Lukas Wunner &lt;lukas@wunner.de&gt;                # [MacBookPro9,1]
Tested-by: Bryan Paradis &lt;bryan.paradis@gmail.com&gt;       # [MacBookPro9,2]
Tested-by: Andrew Worsley &lt;amworsley@gmail.com&gt;          # [MacBookPro10,1]
Tested-by: Chris Bainbridge &lt;chris.bainbridge@gmail.com&gt; # [MacBookPro10,2]
Signed-off-by: Lukas Wunner &lt;lukas@wunner.de&gt;
Acked-by: Rafał Miłecki &lt;zajec5@gmail.com&gt;
Acked-by: Matt Fleming &lt;matt@codeblueprint.co.uk&gt;
Cc: Andy Lutomirski &lt;luto@kernel.org&gt;
Cc: Bjorn Helgaas &lt;bhelgaas@google.com&gt;
Cc: Borislav Petkov &lt;bp@alien8.de&gt;
Cc: Brian Gerst &lt;brgerst@gmail.com&gt;
Cc: Chris Milsted &lt;cmilsted@redhat.com&gt;
Cc: Denys Vlasenko &lt;dvlasenk@redhat.com&gt;
Cc: H. Peter Anvin &lt;hpa@zytor.com&gt;
Cc: Josh Poimboeuf &lt;jpoimboe@redhat.com&gt;
Cc: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Cc: Matthew Garrett &lt;mjg59@srcf.ucam.org&gt;
Cc: Michael Buesch &lt;m@bues.ch&gt;
Cc: Peter Zijlstra &lt;peterz@infradead.org&gt;
Cc: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Cc: Yinghai Lu &lt;yinghai@kernel.org&gt;
Cc: b43-dev@lists.infradead.org
Cc: linux-pci@vger.kernel.org
Cc: linux-wireless@vger.kernel.org
Link: http://lkml.kernel.org/r/48d0972ac82a53d460e5fce77a07b2560db95203.1465690253.git.lukas@wunner.de
[ Did minor readability edits. ]
Signed-off-by: Ingo Molnar &lt;mingo@kernel.org&gt;
[bwh: Backported to 3.2:
 - early_ioremap() is declared in &lt;asm/io.h&gt; not &lt;asm/early_ioremap.h&gt;
 - Add definition of BCMA_RESET_ST
 - Adjust context]
Signed-off-by: Ben Hutchings &lt;ben@decadent.org.uk&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>bcma: mips: fix clearing device IRQ</title>
<updated>2013-01-03T03:33:33+00:00</updated>
<author>
<name>Rafał Miłecki</name>
<email>zajec5@gmail.com</email>
</author>
<published>2012-12-10T06:53:56+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=5586cbb7545108625de4b7f3ee5f5b4981f7ddf9'/>
<id>5586cbb7545108625de4b7f3ee5f5b4981f7ddf9</id>
<content type='text'>
commit cbbc0138efe1dcd5426b8fc5d87741f5057aee72 upstream.

We were using wrong IRQ number so clearing wasn't working at all.
Depending on a platform this could result in a one device having two
interrupts assigned. On BCM4706 this resulted in all IRQs being broken.

Cc: Hauke Mehrtens &lt;hauke@hauke-m.de&gt;
Signed-off-by: Rafał Miłecki &lt;zajec5@gmail.com&gt;
Acked-by: Hauke Mehrtens &lt;hauke@hauke-m.de&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
Signed-off-by: Ben Hutchings &lt;ben@decadent.org.uk&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit cbbc0138efe1dcd5426b8fc5d87741f5057aee72 upstream.

We were using wrong IRQ number so clearing wasn't working at all.
Depending on a platform this could result in a one device having two
interrupts assigned. On BCM4706 this resulted in all IRQs being broken.

Cc: Hauke Mehrtens &lt;hauke@hauke-m.de&gt;
Signed-off-by: Rafał Miłecki &lt;zajec5@gmail.com&gt;
Acked-by: Hauke Mehrtens &lt;hauke@hauke-m.de&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
Signed-off-by: Ben Hutchings &lt;ben@decadent.org.uk&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>bcma: fix unregistration of cores</title>
<updated>2012-10-30T23:26:47+00:00</updated>
<author>
<name>Piotr Haber</name>
<email>phaber@broadcom.com</email>
</author>
<published>2012-10-11T12:05:15+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=3b3cbdb97533b1e47260a9dcb5fd9d7f4741de5c'/>
<id>3b3cbdb97533b1e47260a9dcb5fd9d7f4741de5c</id>
<content type='text'>
commit 1fffa905adffbf0d3767fc978ef09afb830275eb upstream.

When cores are unregistered, entries
need to be removed from cores list in a safe manner.

Reported-by: Stanislaw Gruszka &lt;sgruszka@redhat.com&gt;
Reviewed-by: Arend Van Spriel &lt;arend@broadcom.com&gt;
Signed-off-by: Piotr Haber &lt;phaber@broadcom.com&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
Signed-off-by: Ben Hutchings &lt;ben@decadent.org.uk&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 1fffa905adffbf0d3767fc978ef09afb830275eb upstream.

When cores are unregistered, entries
need to be removed from cores list in a safe manner.

Reported-by: Stanislaw Gruszka &lt;sgruszka@redhat.com&gt;
Reviewed-by: Arend Van Spriel &lt;arend@broadcom.com&gt;
Signed-off-by: Piotr Haber &lt;phaber@broadcom.com&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
Signed-off-by: Ben Hutchings &lt;ben@decadent.org.uk&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>bcma: invalidate the mapped core over suspend/resume</title>
<updated>2012-01-26T00:13:50+00:00</updated>
<author>
<name>Rafał Miłecki</name>
<email>zajec5@gmail.com</email>
</author>
<published>2012-01-13T22:58:38+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=c893fe01b35036f062a9c7d7f6b7fc926fc91115'/>
<id>c893fe01b35036f062a9c7d7f6b7fc926fc91115</id>
<content type='text'>
commit 28e7d218da975f6ae1751e293aed938952c55c98 upstream.

This clears the currently mapped core when suspending, to force
re-mapping after resume. Without that we were touching default core
registers believing some other core is mapped. Such a behaviour
resulted in lockups on some machines.

Signed-off-by: Rafał Miłecki &lt;zajec5@gmail.com&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@suse.de&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 28e7d218da975f6ae1751e293aed938952c55c98 upstream.

This clears the currently mapped core when suspending, to force
re-mapping after resume. Without that we were touching default core
registers believing some other core is mapped. Such a behaviour
resulted in lockups on some machines.

Signed-off-by: Rafał Miłecki &lt;zajec5@gmail.com&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@suse.de&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>bcma: support for suspend and resume</title>
<updated>2012-01-12T19:29:20+00:00</updated>
<author>
<name>Rafał Miłecki</name>
<email>zajec5@gmail.com</email>
</author>
<published>2011-12-09T21:16:07+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=618bbbe723e697e71b4533d3d8af554fbe5f3e16'/>
<id>618bbbe723e697e71b4533d3d8af554fbe5f3e16</id>
<content type='text'>
commit 775ab52142b02237a54184238e922251c59a2b5c upstream.

bcma used to lock up machine without enabling PCI or initializing CC.

Signed-off-by: Rafał Miłecki &lt;zajec5@gmail.com&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@suse.de&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 775ab52142b02237a54184238e922251c59a2b5c upstream.

bcma used to lock up machine without enabling PCI or initializing CC.

Signed-off-by: Rafał Miłecki &lt;zajec5@gmail.com&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@suse.de&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>bcma: fix implicit use of export.h contents</title>
<updated>2011-10-31T23:32:02+00:00</updated>
<author>
<name>Paul Gortmaker</name>
<email>paul.gortmaker@windriver.com</email>
</author>
<published>2011-07-28T01:21:04+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=44a8e3772f53a5337e74700fc166a3d4c3ef59a2'/>
<id>44a8e3772f53a5337e74700fc166a3d4c3ef59a2</id>
<content type='text'>
Fix in advance, or we will get things like this:

drivers/bcma/core.c:20: warning: data definition has no type or storage class
drivers/bcma/core.c:20: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL'
drivers/bcma/core.c:20: warning: parameter names (without types) in function declaration

Signed-off-by: Paul Gortmaker &lt;paul.gortmaker@windriver.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Fix in advance, or we will get things like this:

drivers/bcma/core.c:20: warning: data definition has no type or storage class
drivers/bcma/core.c:20: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL'
drivers/bcma/core.c:20: warning: parameter names (without types) in function declaration

Signed-off-by: Paul Gortmaker &lt;paul.gortmaker@windriver.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>bcma: add module.h to the modular portions of this driver</title>
<updated>2011-10-31T23:32:01+00:00</updated>
<author>
<name>Paul Gortmaker</name>
<email>paul.gortmaker@windriver.com</email>
</author>
<published>2011-07-01T20:06:37+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=200351c77d6aa7fc36d3a49132c68e95ad9654c8'/>
<id>200351c77d6aa7fc36d3a49132c68e95ad9654c8</id>
<content type='text'>
This will ensure that it continues to build once we remove
the implicit module.h presence from everywhere later on.

Signed-off-by: Paul Gortmaker &lt;paul.gortmaker@windriver.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
This will ensure that it continues to build once we remove
the implicit module.h presence from everywhere later on.

Signed-off-by: Paul Gortmaker &lt;paul.gortmaker@windriver.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branch 'master' of git://git.infradead.org/users/linville/wireless</title>
<updated>2011-09-20T18:11:55+00:00</updated>
<author>
<name>John W. Linville</name>
<email>linville@tuxdriver.com</email>
</author>
<published>2011-09-20T18:11:55+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=4d8b61490c14a36efdee4a8bf523e26809df05ac'/>
<id>4d8b61490c14a36efdee4a8bf523e26809df05ac</id>
<content type='text'>
Conflicts:
	drivers/net/wireless/iwlwifi/iwl-pci.c
	drivers/net/wireless/iwlwifi/iwl-trans-pcie-tx.c
	drivers/net/wireless/rt2x00/rt2800usb.c
	drivers/net/wireless/wl12xx/main.c
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Conflicts:
	drivers/net/wireless/iwlwifi/iwl-pci.c
	drivers/net/wireless/iwlwifi/iwl-trans-pcie-tx.c
	drivers/net/wireless/rt2x00/rt2800usb.c
	drivers/net/wireless/wl12xx/main.c
</pre>
</div>
</content>
</entry>
<entry>
<title>bcma: cc: export more control functions</title>
<updated>2011-09-19T20:10:11+00:00</updated>
<author>
<name>Rafał Miłecki</name>
<email>zajec5@gmail.com</email>
</author>
<published>2011-09-16T10:33:58+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=3861b2c5d90b219ee772b5a1d1a32ee630564121'/>
<id>3861b2c5d90b219ee772b5a1d1a32ee630564121</id>
<content type='text'>
Signed-off-by: Rafał Miłecki &lt;zajec5@gmail.com&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Signed-off-by: Rafał Miłecki &lt;zajec5@gmail.com&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
</pre>
</div>
</content>
</entry>
</feed>
