linux-stable.git/drivers/bcma, branch linux-6.10.y

bcma: convert to platform remove callback returning void

2024-03-12T15:32:55+00:00

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König 
Signed-off-by: Kalle Valo 
Link: https://msgid.link/a92e4b2f7aace64a1e3a91af7974a6982700a18f.1709886922.git.u.kleine-koenig@pengutronix.de

bcma: make bcma_bus_type const

2024-02-06T18:07:35+00:00

Now that the driver core can properly handle constant struct bus_type,
move the bcma_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.

Cc: Greg Kroah-Hartman 
Suggested-by: Greg Kroah-Hartman 
Signed-off-by: Ricardo B. Marliere 
Reviewed-by: Greg Kroah-Hartman 
Signed-off-by: Kalle Valo 
Link: https://msgid.link/20240204-bus_cleanup-bcma-v1-1-0d881c793190@marliere.net

bcma: Use PCI_HEADER_TYPE_MASK instead of literal

2023-11-30T19:21:28+00:00

Replace literal 0x7f with PCI_HEADER_TYPE_MASK.

Signed-off-by: Ilpo Järvinen 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/20231124090919.23687-6-ilpo.jarvinen@linux.intel.com

bcma: Add explicit of_device.h include

2023-04-14T12:32:56+00:00

bcma/main.c uses of_dma_configure() which is declared in of_device.h.
of_device.h gets implicitly included by of_platform.h, but that is going
to be removed soon.

Signed-off-by: Rob Herring 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/20230410232701.1561613-1-robh@kernel.org

bcma: remove unused mips_read32 function

2023-03-31T15:04:59+00:00

clang with W=1 reports
drivers/bcma/driver_mips.c:49:19: error: unused function
  'mips_read32' [-Werror,-Wunused-function]
static inline u32 mips_read32(struct bcma_drv_mips *mcore,
                  ^
This function is not used so remove it.

Signed-off-by: Tom Rix 
Reviewed-by: Simon Horman 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/20230324190647.2654293-1-trix@redhat.com

bcma: Use of_address_to_resource()

2023-03-31T15:04:40+00:00

Replace of_get_address() and of_translate_address() calls with single
call to of_address_to_resource().

Signed-off-by: Rob Herring 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/20230319163159.225773-1-robh@kernel.org

driver core: make struct bus_type.uevent() take a const *

2023-01-27T12:45:52+00:00

The uevent() callback in struct bus_type should not be modifying the
device that is passed into it, so mark it as a const * and propagate the
function signature changes out into all relevant subsystems that use
this callback.

Acked-by: Rafael J. Wysocki 
Acked-by: Hans de Goede 
Link: https://lore.kernel.org/r/20230111113018.459199-16-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman

bcma: Fail probe if GPIO subdriver fails

2022-11-04T10:59:51+00:00

We currently register the BCMA core even if the GPIO portions
fail. There is no reason for this: the GPIO should register
just fine, if it fails the BCMA driver should fail.

We already gracefully handle the case where the GPIO driver is
not compiled in.

Signed-off-by: Linus Walleij 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/20221028093000.239020-1-linus.walleij@linaro.org

Kalle Valo says:

2022-10-29T01:31:40+00:00

====================
pull-request: wireless-next-2022-10-28

First set of patches v6.2. mac80211 refactoring continues for Wi-Fi 7.
All mac80211 driver are now converted to use internal TX queues, this
might cause some regressions so we wanted to do this early in the
cycle.

Note: wireless tree was merged[1] to wireless-next to avoid some
conflicts with mac80211 patches between the trees. Unfortunately there
are still two smaller conflicts in net/mac80211/util.c which Stephen
also reported[2]. In the first conflict initialise scratch_len to
"params->scratch_len ?: 3 * params->len" (note number 3, not 2!) and
in the second conflict take the version which uses elems->scratch_pos.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next.git/commit/?id=dfd2d876b3fda1790bc0239ba4c6967e25d16e91
[2] https://lore.kernel.org/all/20221020032340.5cf101c0@canb.auug.org.au/

mac80211
 - preparation for Wi-Fi 7 Multi-Link Operation (MLO) continues
 - add API to show the link STAs in debugfs
 - all mac80211 drivers are now using mac80211 internal TX queues (iTXQs)

rtw89
 - support 8852BE

rtl8xxxu
 - support RTL8188FU

brmfmac
 - support two station interfaces concurrently

bcma
 - support SPROM rev 11
====================

Link: https://lore.kernel.org/r/20221028132943.304ECC433B5@smtp.kernel.org
Signed-off-by: Jakub Kicinski

bcma: gpio: Convert to immutable gpio irqchip

2022-10-19T06:02:18+00:00

This switches the BCMA gpio irqchip to be immutable. The GPIO subsystem plays
tricks on the irqchip structures, and we're fixing it one driver at a time. See
merge commit 4bde53ab3370 ("Merge branch irq/gpio-immutable into
irq/irqchip-next") for all the details.

Tested on the D-Link DWL-6810AP.

Cc: Marc Zyngier 
Cc: Bartosz Golaszewski 
Cc: Rafał Miłecki 
Signed-off-by: Linus Walleij 
Acked-by: Marc Zyngier 
Reviewed-by: Bartosz Golaszewski 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/20221012192348.2234478-1-linus.walleij@linaro.org