linux-stable.git/drivers/bcma/main.c, branch v3.3

bcma: don't fail for bad SPROM CRC

2012-02-06T19:37:52+00:00

The brcmsmac driver is now using the bcma SPROM CRC check, which does
not recognize all chipsets that were functional prior to the switch. In
particular, the current code bails out on odd CRC errors in recent
Macbooks. This patch ignores those errors, with the argument that an
unrecognized SPROM should be treated similarly to a non-existing one.

Signed-off-by: Henrik Rydberg 
Signed-off-by: John W. Linville

bcma: connect the bcma bus suspend/resume to the bcma driver suspend/resume

2012-01-17T14:54:08+00:00

Now the low-level driver actually gets informed that it is getting suspended and resumed.

Signed-off-by: Linus Torvalds 
Signed-off-by: John W. Linville

bcma: add stub for bcma_bus_suspend()

2012-01-17T14:54:05+00:00

.. and connect it up with the pci host bcma driver.

Now, the next step is to connect those bcma bus-level suspend/resume
functions to the actual bcma device suspend resume functions.

Signed-off-by: Linus Torvalds 
Signed-off-by: Rafał Miłecki 
Signed-off-by: John W. Linville

bcma: support for suspend and resume

2011-12-13T20:33:30+00:00

bcma used to lock up machine without enabling PCI or initializing CC.

Cc: stable@vger.kernel.org
Signed-off-by: Rafał Miłecki 
Signed-off-by: John W. Linville

bcma: add module.h to the modular portions of this driver

2011-10-31T23:32:01+00:00

This will ensure that it continues to build once we remove
the implicit module.h presence from everywhere later on.

Signed-off-by: Paul Gortmaker

Merge branch 'master' of github.com:davem330/net

2011-09-22T07:23:13+00:00

Conflicts:
	MAINTAINERS
	drivers/net/Kconfig
	drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
	drivers/net/ethernet/broadcom/tg3.c
	drivers/net/wireless/iwlwifi/iwl-pci.c
	drivers/net/wireless/iwlwifi/iwl-trans-tx-pcie.c
	drivers/net/wireless/rt2x00/rt2800usb.c
	drivers/net/wireless/wl12xx/main.c

bcma: add uevent to the bus, to autoload drivers

2011-08-22T18:21:41+00:00

Signed-off-by: David Woodhouse 
Acked-by: Rafał Miłecki 
Signed-off-by: John W. Linville

bcma: add mips driver

2011-08-08T18:29:26+00:00

This adds a mips driver to bcma. This is only found on embedded
devices. For now the driver just initializes the irqs used on this
system.

Signed-off-by: Hauke Mehrtens 
Acked-by: Ralf Baechle 
Signed-off-by: John W. Linville

bcma: add SOC bus

2011-08-08T18:29:25+00:00

This patch adds support for using bcma on a Broadcom SoC as the system
bus. An SoC like the bcm4716 could register this bus and use it to
searches for the bcma cores and register the devices on this bus.

BCMA_HOSTTYPE_NONE was intended for SoCs at first but BCMA_HOSTTYPE_SOC
is a better name.

Acked-by: Rafał Miłecki 
Signed-off-by: Hauke Mehrtens 
Acked-by: Ralf Baechle 
Signed-off-by: John W. Linville

bcma: add functions to scan cores needed on SoCs

2011-08-08T18:29:24+00:00

The chip common and mips core have to be setup early in the boot
process to get the cpu clock.
bcma_bus_early_register() gets pointers to some space to store the core
data and searches for the chip common and mips core and initializes
chip common. After that was done and the kernel is out of early boot we
just have to run bcma_bus_register() and it will search for the other
cores, initialize and register them.
The cores are getting the same numbers as before.

Acked-by: Rafał Miłecki 
Signed-off-by: Hauke Mehrtens 
Acked-by: Ralf Baechle 
Signed-off-by: John W. Linville