linux-stable.git/drivers/bcma/driver_chipcommon.c, branch linux-4.8.y

bcma: move flash detection code to ChipCommon core driver

2016-03-07T12:41:08+00:00

Flashes are attached and accessible through ChipCommon core, they aren't
connected to MIPS one. Moreover some new ARM devices (e.g. BCM47189) may
have serial flash accessibility using ChipCommon registers as well. To
support them we can't keep this code in MIPS core driver.

Signed-off-by: Rafał Miłecki 
Signed-off-by: Kalle Valo

bcma: add support for BCM47094

2016-02-06T11:46:59+00:00

It's another SoC with 32 GPIOs and simplified watchdog handling. It was
tested on D-Link DIR-885L.

Signed-off-by: Rafał Miłecki 
Signed-off-by: Kalle Valo

bcma: init serial console directly from ChipCommon code

2016-02-06T11:45:04+00:00

UART is connected to and controlled over ChipCommon core. It doesn't
have much to do with MIPS core (where we initialize it currently)
except just existing on embedded systemms. There isn't point of such
cross-core initialization (and we needed #ifdef anyway) so just handle
it in ChipCommon.

Signed-off-by: Rafał Miłecki 
Signed-off-by: Kalle Valo

bcma: support PMU present as separated bus core

2016-02-06T11:36:11+00:00

On recent Broadcom chipsets PMU is present as separated core and it
can't be accessed using ChipCommon anymore as it fails with e.g.:
[    0.000577] Unhandled fault: external abort on non-linefetch (0x1008) at 0xf1000604

Solve it by using a new (PMU) core pointer set to ChipCommon or PMU
depending on the hardware capabilities.

Signed-off-by: Rafał Miłecki 
Signed-off-by: Kalle Valo

bcma: fix watchdog on some ARM chipsets

2015-01-29T08:44:44+00:00

These chipsets don't need changing clock mode.

Signed-off-by: Rafał Miłecki 
Signed-off-by: Kalle Valo

bcma: fix three coding style issues, more than 80 characters per line

2015-01-15T12:41:58+00:00

Three lines with more than 80 characters per line have been split in several lines.

Signed-off-by: Oscar Forner Martinez 
Acked-by: Rafa? Mi?ecki 
Signed-off-by: Kalle Valo

bcma: make it possible to specify a IRQ num in bcma_core_irq()

2014-11-11T21:31:11+00:00

This moves bcma_core_irq() to main.c and add a extra parameter with a
number so that we can return different irq number for devices with more
than one.

Signed-off-by: Hauke Mehrtens 
Signed-off-by: John W. Linville

bcma: add support for BCM43142

2013-06-27T17:42:16+00:00

Signed-off-by: Rafał Miłecki 
Signed-off-by: John W. Linville

bcma: export some gpio functions

2013-03-27T17:39:09+00:00

These functions will be used by brcmsmac.

Signed-off-by: Hauke Mehrtens 
Signed-off-by: John W. Linville

bcma: export bcma_chipco_get_alp_clock()

2013-03-27T17:39:09+00:00

This function will be used by brcmsmac.

Signed-off-by: Hauke Mehrtens 
Signed-off-by: John W. Linville