commit f2b1cb39d5ccab090d8353788f186f7e7a1fffd4 upstream.

When building ARCH=riscv using clang with CONFIG_FORTIFY_SOURCE and
CONFIG_UBSAN_BOUNDS enabled, CONFIG_NR_CPUS > 64, and the default value of
2 for CONFIG_NODES_SHIFT, there is a compiletime warning from the fortify
routines.

  In file included from mm/arch_numa.c:11:
  In file included from include/linux/acpi.h:14:
  In file included from include/linux/resource_ext.h:11:
  In file included from include/linux/slab.h:17:
  In file included from include/linux/gfp.h:7:
  In file included from include/linux/mmzone.h:8:
  In file included from include/linux/spinlock.h:60:
  In file included from include/linux/interrupt_rc.h:17:
  In file included from include/linux/smp.h:13:
  In file included from include/linux/cpumask.h:11:
  In file included from include/linux/bitmap.h:13:
  In file included from include/linux/string.h:383:
  include/linux/fortify-string.h:430:4: warning: call to '__write_overflow_field' declared with 'warning' attribute: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribue-warning]
    430 |                         __write_overflow_field(p_size_field, size);
        |                         ^
  include/linux/fortify-string.h:430:4: note: called by function 'fortify_memset_chk(unsigned long, unsigned long, unsigned long)'
  include/linux/bitmap.h:248:3: note: inlined by function 'setup_node_to_cpumask_map'
    248 |                 memset(dst, 0, len);
        |                 ^
  include/linux/fortify-string.h:462:25: note: expanded from macro 'memset'
    462 | #define memset(p, c, s) __fortify_memset_chk(p, c, s,                   \
        |                         ^
  include/linux/fortify-string.h:453:2: note: expanded from macro '__fortify_memset_chk'
    453 |         fortify_memset_chk(__fortify_size, p_size, p_size_field),       \
        |         ^
  include/linux/fortify-string.h:430:4: note: use '-gline-directives-only' (implied by '-g1') or higher for more accurate inlining chain locations
    430 |                         __write_overflow_field(p_size_field, size);
        |                         ^
  1 warning generated.

In this configuration, MAX_NUMNODES is 4.  clang unrolls the for loop in
setup_node_to_cpumask_map() past this, which triggers the fortify check
when accessing node_to_cpumask_map on the theoretical fifth loop iteration
because it would be an out of bounds write.

Make it clear to clang that nr_node_ids is bounded by MAX_NUMNODES due to
the logic in setup_nr_node_ids() by early returning in
setup_node_to_cpumask_map() should that condition be violated.

Link: https://lore.kernel.org/20260813-arch_numa-avoid-fortify-warning-v2-1-093ad97a78df@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://github.com/ClangBuiltLinux/linux/issues/2174
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Bill Wendling <morbo@google.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit cb258d651d747a7f7063d40f145418bee562ceaf upstream.

device_prepare() blocks runtime PM for a device with runtime PM disabled
before invoking its system-sleep ->prepare() callback. For a device that
has never enabled runtime PM, this changes dev->power.last_status from
RPM_INVALID to RPM_BLOCKED.

If the callback returns an error, dpm_prepare() does not move the device
to dpm_prepared_list. Consequently, the recovery path through
dpm_complete() never calls device_complete() for the failing device.

The error path drops the runtime PM usage reference, but does not clear
RPM_BLOCKED. A later legitimate pm_runtime_enable() then reports:

  Attempt to enable runtime PM when it is blocked

before clearing the stale state.

Call pm_runtime_unblock() on the prepare error path before dropping the
runtime PM reference, matching the cleanup performed by device_complete().

The issue was reproduced with a platform test device whose ->prepare()
callback returns -EIO while runtime PM has never been enabled. Before
the fix, last_status remained RPM_BLOCKED after the failed suspend and
the first pm_runtime_enable() produced the warning above. With the fix,
last_status is restored to RPM_INVALID and the warning is absent.

Fixes: 3e5eee147b7b ("PM: Block enabling of runtime PM during system suspend")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Shibo Zhu <3499129952@qq.com>
Link: https://patch.msgid.link/tencent_C5AC0A02FC01F700E764F8C2E3ECE4F41009@qq.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1900692555826753adab8799a1a8d50bb1ee200c upstream.

When iterate over children of a fwnode that has a secondary fwnode,
fwnode_get_next_child_node() can enter an infinite loop if the secondary
fwnode has more than one child.

                       Parent        Child
      (Primary fwnode)   FWa:   {FWa1, FWa2, FWa3}
    (Secondary fwnode)   FWb:   {FWb1, FWb2}

In this case:

 ┌─> fwnode_get_next_child_node(FWa, FWa1)
 │    - fwnode_call_ptr_op(FWa, get_next_child_node, FWa1) returns FWa2
 │
 │   ...
 │
 │   fwnode_get_next_child_node(FWa, FWa3)
 │    - fwnode_call_ptr_op(FWa, get_next_child_node, FWa3) returns NULL
 │    - fwnode_call_ptr_op(FWb, get_next_child_node, FWa3) returns FWb1
 │
 │   fwnode_get_next_child_node(FWa, FWb1)
 │    - fwnode_call_ptr_op(FWa, get_next_child_node, FWb1) returns FWa1
 └────┘

This cause fwnode_for_each_child_node() to loop indefinitely, reapeatedly
output {FWa1, FWa2, FWa3, FWb1, FWa1, ...}.

The root cause is that when the current child (FWb1) belongs to the
secondary fwnode, calling get_next_child_node() on the parimary fwnode
incorrectly returns the first child (FWa1) again instead of NULL.

Fix this by dynamically checking the parent fwnode of the current child
before calling get_next_child_node(). This approach follows the pattern
established in commit b5b41ab6b0c1 ("device property: Check
fwnode->secondary in fwnode_graph_get_next_endpoint()").

Fixes: 2692c614f8f0 ("device property: Allow secondary lookup in fwnode_get_next_child_node()")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20260611203537.1786399-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regmap_sdw_mbq_poll_busy() decides whether to poll the Function Busy bit
by calling ctx->readable_reg(), which is a straight copy of
config->readable_reg. That callback is optional: regmap_readable() treats
a NULL ->readable_reg as "every register is readable", and drivers rely on
that. es9356 and tac5xx2-sdw both build an MBQ regmap without one.

Since commit ca1b11b36d82 ("regmap: sdw-mbq: Allow defers on undeferrable
controls") the poll runs on every -ENODATA, not only for Controls the
driver marked deferrable, so any of those devices answering
COMMAND_IGNORED takes the kernel through a NULL function pointer.

Treat a missing callback the way the rest of regmap does and poll.

Fixes: 5bc493bf0c37 ("regmap: sdw-mbq: Add support for SDCA deferred controls")
Signed-off-by: Andrey Golovko <andrey.golovko@gmail.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260811184500.5312-1-andrey.golovko@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

When polling Function Busy using read_poll_timeout() the total timeout
and retry delay arguments are swapped. This leads to only a single retry
being processed, it seems the existing users typically do succeed before
the first retry.

Swap the arguments over to ensure the correct polling time.

Reported-by: Ville Saarinen <wiza@saarinenkoti.fi>
Link: https://lore.kernel.org/linux-sound/ansTPGgVNoDJlA5r@opensource.cirrus.com/T/#m680731a2f307f1f5176b27ed5aa560ddc94e5d62
Fixes: 5bc493bf0c37 ("regmap: sdw-mbq: Add support for SDCA deferred controls")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260811131816.332082-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

regcache_lookup_reg() bsearch()es the reg_defaults array, which requires
it to be sorted by ascending register address.  Entries following a
descending step are never found, so regcache_reg_needs_sync() reports
that they need a sync and they are written to the device on every
regcache_sync() even when they were never touched.

Detect the misordering while reg_defaults is validated against the
register stride and sort the local copy.  The check needs no new loop
and sort() only runs for the affected drivers, which are also warned
about.

Note that sort() is not stable, so for arrays with duplicated register
addresses it remains unspecified which entry is found.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260805132250.2637-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

When we look up registers in the defaults table we use a binary search,
and we have a regcache_sort_defaults() API to help drivers that constuct
their defaults tables on the fly.  Unfortunately the lookup and the sort
don't use the same comparison function, and to make matters worse the
comparison function used during lookups is written for signed register
numbers rather than the unsigned ones we actually have so can produce
suprising results when some of the addresses have the top bit set.

Standardise on the more explicitly coded function to ensure consistent
results.

Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260805-regmap-regcache-sort-v1-1-162186aad8b9@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

Pull regmap fix from Mark Brown:
 "Ensure that we don't overwrite the error code when cleaning up a
  failed cache initialisation, helping people debug issues if they
  do arise"

* tag 'regmap-fix-v7.2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regcache: Do not overwrite error code when finalizing cache after error

Pull MM updates from Andrew Morton:

 - "selftests/mm: clean up build output and verbosity" (Li Wang)

   Remove some noise from the MM selftests build

 - "mm: Free contiguous order-0 pages efficiently" (Ryan Roberts)

   Speed up the freeing of a batch of 0-order pages by first scanning
   them for coalescing opportunities. This is applicable to vfree() and
   to the releasing of frozen pages

 - "mm/damon: introduce DAMOS failed region quota charge ratio"
   (SeongJae Park)

   Address a DAMOS usability issue: The DAMOS quota often exhausts
   prematurely because it charges for all memory attempted, causing slow
   and inconsistent performance when actions fail on unreclaimable
   memory.

   To fix this, a new feature lets users set a smaller, flexible quota
   charge ratio (via a numerator and denominator) for failed regions.
   Since failed actions cause less overhead, reducing their quota cost
   ensures more predictable and efficient DAMOS processing

 - "selftests/cgroup: improve zswap tests robustness and support large
   page sizes" (Li Wang)

   Fix various spurious failures and improves the overall robustness of
   the cgroup zswap selftests

 - "fix MAP_DROPPABLE not supported errno" (Anthony Yznaga)

   Fix an issue in the mlock selftests on arm32

 - "mm: huge_memory: clean up defrag sysfs with shared" (Breno Leitao)

   Some maintenance work in the huge_memory code

 - "treewide: fixup gfp_t printks" (Brendan Jackman)

   Use the special vprintf() gfp_t conversion in various places

 - "mm: Fix vmemmap optimization accounting and initialization" (Muchun
   Song)

   Fix several bugs in the vmemmap optimization, mainly around incorrect
   page accounting and memmap initialization in the DAX and memory
   hotplug paths. It also fixes pageblock migratetype initialization and
   struct page initialization for ZONE_DEVICE compound pages

 - "mm/damon: repost non-hotfix reviewed patches in damon/next tree"

   A sprinkle of unrelated minor bugfixes for DAMON

 - "mm: remove page_mapped()" (David Hildenbrand)

   Remove this function from the tree, replacing it with folio_mapped()

 - "mm/damon: let DAMON be paused and resumed" (SeongJae Park)

   Allow DAMON to be paused and resumed without losing its current state

 - "kasan: hw_tags: Disable tagging for stack and page-tables" (Muhammad
   Usama Anjum)

   Simplify and speed up kasan by removing its ineffective tagging of
   stacks and page tables

 - "mm/damon/reclaim,lru_sort: monitor all system rams by default"
   (SeongJae Park)

   Simplify deployment on diverse hardware like NUMA systems by updating
   DAMON_RECLAIM and DAMON_LRU_SORT to automatically monitor the
   physical address range covering all System RAM areas by default,
   replacing the overly restrictive behavior that only targeted the
   single largest memory block to save on negligible overhead

 - "mm/damon/sysfs: document filters/ directory as deprecated" (SeongJae
   Park)

   Update some DAMON docs

 - "mm: use spinlock guards for zone lock" (Dmitry Ilvokhin)

   Switch zone->lock handling over to using the guard() mechanisms

 - "mm/filemap: tighten mmap_miss hit accounting" (fujunjie)

   Fix a flaw where the mmap_miss counter over-credited page cache hits
   during fault-arounds and page-fault retries. This results in
   significant reduction of redundant synchronous mmap readahead I/O,
   drastically cutting down execution time and gigabytes read for sparse
   random or strided memory access workloads

 - "selftests/cgroup: Fix false positive failures in test_percpu_basic"
   (Li Wang)

   Fix a couple of false-positives in the cgroup kmem selftests

 - "mm/damon/reclaim: support monitoring intervals auto-tuning"
   (SeongJae Park)

   Add a new parameter to DAMON permitting DAMON_RECLAIM to
   automatically tune DAMON's sampling and aggregation intervals

 - "mm/damon/stat: add kdamond_pid parameter" (SeongJae Park)

   Change DAMON_STAT to provide the pid of its kdamond

 - "mm/kmemleak: dedupe verbose scan output" (Breno Leitao)

   Remove large amounts of duplicated backtraces from the verbose-mode
   kmemleak output

 - "mm: remove CONFIG_HAVE_BOOTMEM_INFO_NODE (Part 1)" (David
   Hildenbrand)

   Reduce our use of CONFIG_HAVE_BOOTMEM_INFO_NODE, with a view to
   removing it entirely in a later series

 - "mm/damon: validate min_region_size to be power of 2" (Liew Rui Yan)

   Prevent users from passing a non-power-of-2 value of `addr_unit', as
   this later results in undesirable behavior

 - "mm: document read_pages and simplify usage" (Frederick Mayle)

 - "tools/mm/page-types: Fix misc bugs" (Ye Liu)

   Fix three issues in tools/mm/page-types.c

 - "mm: misc cleanups from __GFP_UNMAPPED series" (Brendan Jackman)

   Implement several cleanups in the page allocator and related code

 - "mm, swap: swap table phase IV: unify allocation" (Kairui Song)

   Unify the allocation and charging of anon and shmem swap in folios,
   provides better synchronization, consolidates the metadata
   management, hence dropping the static array and map, and improves
   performance

 - "mm/damon: introduce data attributes monitoring" (SeongJae Park(

   Extend DAMON to monitor general data attributes other than accesses

 - "mm/vmalloc: free unused pages on vrealloc() shrink" (Shivam Kalra)

   Implement the TODO in vrealloc() to unmap and free unused pages when
   shrinking across a page boundary

 - "mm/damon: documentation and comment fixes" (niecheng)

 - "remove mmap_action success, error hooks" (Lorenzo Stoakes)

   Eliminate custom hooks from mmap_action by removing the problematic
   success_hook which allowed drivers to improperly access uninitialized
   VMAs. It replaces the error_hook with a simple error-code field and
   updates the memory char driver accordingly

 - "mm/damon: minor improvements for code readability and tests"
   (SeongJae Park)

 - "mm/damon: fix macro arguments and clarify quota goals doc" (Maksym
   Shcherba)

 - "userfaultfd: merge fs/userfaultfd.c into mm/userfaultfd.c" (Mike
   Rapoport)

 - "mm/mglru: improve reclaim loop and dirty folio" (Kairui Song and
   others)

   Clean up and slightly improves MGLRU's reclaim loop and dirty
   writeback handling. Large performance improvements are measured

 - "use vma locks for proc/pid/{smaps|numa_maps} reads" (Suren
   Baghdasaryan)

   Use per-vma locks when reading /proc/pid/smaps and numa_maps similar
   to reduce contention on central mmap_lock

 - "refactors thpsize_shmem_enabled_store() and thpsize_shmem_enabled_show()"
   (Ran Xiaokai)

   Some cleanup work in the THP code

 - "selftests/memfd: fix compilation warnings" (Konstantin Khorenko)

   Fix a few build glitches in the memfd selftest code.

 - "memcg: shrink obj_stock_pcp and cache multiple objcgs" (Shakeel
   Butt)

   Resolve a 68% performance regression caused by NUMA-node cache
   thrashing around struct obj_stock_pcp by shrinking its existing
   fields and expanding it into a multi-slot array that caches up to
   five obj_cgroup pointers per CPU, allowing per-node variants of the
   same memcg to coexist within a single 64-byte cache line.

 - "zram: writeback fixes" (Sergey Senozhatsky)

   address a couple of unrelated zram writeback issues

 - "mm: switch THP shrinker to list_lru" (Johannes Weiner)

   Resolve NUMA-awareness issues and streamlines callsite interaction by
   refactoring and extending the list_lru API to completely replace the
   complex, open-coded deferred split queue for Transparent Huge Pages

 - "mm: improve large folio readahead for exec memory" (Usama Arif)

   Improve large-folio readahead on systems like 64K-page arm64 by
   preventing the mmap_miss check from permanently disabling
   target-oriented VM_EXEC readahead, and by generalizing the
   force_thp_readahead gate to support mappings with any usefully large
   maximum folio order under the cache cap.

 - "userfaultfd/pagemap: pre-existing fixes" (Kiryl Shutsemau)

   Fix a bunch of minor issues in the userfaultfd/pagemap, all of which
   were flagged by Sashiko review of proposed new material

 - "mm/sparse-vmemmap: Provide generic vmemmap_set_pmd() and
   vmemmap_check_pmd()" (Muchun Song)

   Provide generic versions of these two functions so the four
   arch-specific implementations can be removed.

 - "mm/swap, PM: hibernate: fix swapoff race in uswsusp by pinning swap
   device" (Youngjun Park)

   Address a uswsusp-vs-swapoff race and reduces the swap device
   reference taking/releasing frequency.

 - "mm/hmm: A fix and a selftest" (Dev Jain)

* tag 'mm-stable-2026-06-18-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
  selftests/mm/hmm-tests: test pagemap reads of PMD device-private entries
  fs/proc/task_mmu: do not warn on seeing non-migration pmd entry
  lib/test_hmm: check alloc_page_vma() return value and handle OOM
  mm/compaction: cap compact_gap() at COMPACT_CLUSTER_MAX
  mm/swap: remove redundant swap device reference in alloc/free
  mm/swap, PM: hibernate: fix swapoff race in uswsusp by pinning swap device
  mm/filemap: use folio_next_index() for start
  vmalloc: fix NULL pointer dereference in is_vm_area_hugepages()
  sparc/mm: drop vmemmap_check_pmd helper and use generic code
  loongarch/mm: drop vmemmap_check_pmd helper and use generic code
  riscv/mm: drop vmemmap_pmd helpers and use generic code
  arm64/mm: drop vmemmap_pmd helpers and use generic code
  mm/sparse-vmemmap: provide generic vmemmap_set_pmd() and vmemmap_check_pmd()
  rust: page: mark Page::nid as inline
  userfaultfd: build __VMA_UFFD_FLAGS from config-gated masks
  userfaultfd: gate must_wait writability check on pte_present()
  mm/huge_memory: preserve pmd_swp_uffd_wp on device-private PMD downgrade
  fs/proc/task_mmu: fix hugetlb self-deadlock in pagemap_scan_pte_hole()
  fs/proc/task_mmu: use huge_page_size() in pagemap_scan_hugetlb_entry()
  fs/proc/task_mmu: fix make_uffd_wp_huge_pte() prot-update race
  ...

Pull SoC driver updates from Arnd Bergmann:
 "There are a few added drivers, but mostly the normal maintenance to
  drivers for firmware, memory controller and other soc specific
  hardware:

   - The NXP QuickEngine gets modern MSI support, which allows some
     cleanups to the GICv3 irqchip chip driver

   - A new SoC specific driver for the Renesas R-Car MFIS unit is added,
     encapsulating support for the on-chip mailbox and hwspinlock
     implementations that are not easily separated into individual
     drivers

   - The Qualcomm SoC drivers add support for additional SoC
     implementations, and flexibility around power management for the
     serial-engine driver as well as probing the LLCC driver using
     custom hardware descriptions inside of the device itself.

   - Added support for the Samsung thermal management unit

   - A cleanup to the Tegra 'PMC' driver interfaces to remove legacy
     APIs and allow multiple PMC instances everywhere.

   - Updates to the TI SCI and KNAS drivers to improve suspend/resume
     support.

   - Minor driver changes for mediatek, xilinx, allwinner, aspeed,
     tegra, broadcom, amd, microchip and starfive specific drivers

   - Memory controller updates for Tegra and Renesas for additional SoC
     types and other improvements.

   - Firmware driver updates for Arm FF-A, SMCCC and SCMI interfaces, to
     update driver probing, object lifetimes and address minor bugs"

* tag 'soc-drivers-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits)
  Revert "firmware: zynqmp: Add dynamic CSU register discovery and sysfs interface"
  Revert "Documentation: ABI: add sysfs interface for ZynqMP CSU registers"
  memory: tegra234: drop dead NULL check in tegra234_mc_icc_aggregate()
  memory: tegra264: drop redundant tegra264_mc_icc_aggregate()
  memory: tegra186-emc: stop borrowing MC aggregate hook for EMC
  soc: aspeed: cleanup dead default for ASPEED_SOCINFO
  firmware: tegra: bpmp: Add support for multi-socket platforms
  firmware: tegra: bpmp: Propagate debugfs errors
  soc/tegra: pmc: Add Tegra238 support
  soc/tegra: pmc: Restrict power-off handler to Nexus 7
  soc/tegra: pmc: Populate powergate debugfs only when needed
  soc/tegra: pmc: Move legacy code behind CONFIG_ARM guard
  soc/tegra: pmc: Remove unused legacy functions
  soc/tegra: pmc: Create PMC context dynamically
  firmware: samsung: acpm: remove compile-testing stubs
  firmware: samsung: acpm: Add devm_acpm_get_by_phandle helper
  firmware: samsung: acpm: Add TMU protocol support
  firmware: samsung: acpm: Make acpm_ops const and access via pointer
  firmware: samsung: acpm: Drop redundant _ops suffix in acpm_ops members
  firmware: samsung: acpm: Annotate rx_data->cmd with __counted_by_ptr
  ...