[ Upstream commit 8e1ddfada4530939a8cb64ee9251aef780474274 ] When releasing a device, if the release action causes a group to be released, a warning is emitted because it can't find the group. This happens because devres_release_all() moves the entire list to a todo list and also move the group markers. Considering r* normal resource nodes and g1 a group resource node: g1 -----------. v v r1 -> r2 -> g1[0] -> r3-> g[1] -> r4 After devres_release_all(), dev->devres_head becomes empty and the todo list it iterates on becomes: g1 v r1 -> r2 -> r3-> r4 -> g1[0] When a call to component_del() is made and takes down the aggregate device, a warning like this happen: RIP: 0010:devres_release_group+0x362/0x530 ... Call Trace: <TASK> component_unbind+0x156/0x380 component_unbind_all+0x1d0/0x270 mei_component_master_unbind+0x28/0x80 [mei_hdcp] take_down_aggregate_device+0xc1/0x160 component_del+0x1c6/0x3e0 intel_hdcp_component_fini+0xf1/0x170 [xe] xe_display_fini+0x1e/0x40 [xe] Because the devres group corresponding to the hdcp component cannot be found. Just ignore this corner case: if the dev->devres_head is empty and the caller is trying to remove a group, it's likely in the process of device cleanup so just ignore it instead of warning. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250222001051.3012936-2-lucas.demarchi@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03f1444016b71feffa1dfb8a51f15ba592f94b13 ]
When dpm_suspend() fails, some devices with power.direct_complete set
may not have been handled by device_suspend() yet, so runtime PM has
not been disabled for them yet even though power.direct_complete is set.
Since device_resume() expects that runtime PM has been disabled for all
devices with power.direct_complete set, it will attempt to reenable
runtime PM for the devices that have not been processed by device_suspend()
which does not make sense. Had those devices had runtime PM disabled
before device_suspend() had run, device_resume() would have inadvertently
enable runtime PM for them, but this is not expected to happen because
it would require ->prepare() callbacks to return positive values for
devices with runtime PM disabled, which would be invalid.
In practice, this issue is most likely benign because pm_runtime_enable()
will not allow the "disable depth" counter to underflow, but it causes a
warning message to be printed for each affected device.
To allow device_resume() to distinguish the "direct complete" devices
that have been processed by device_suspend() from those which have not
been handled by it, make device_suspend() set power.is_suspended for
"direct complete" devices.
Next, move the power.is_suspended check in device_resume() before the
power.direct_complete check in it to make it skip the "direct complete"
devices that have not been handled by device_suspend().
This change is based on a preliminary patch from Saravana Kannan.
Fixes: aae4518b3124 ("PM / sleep: Mechanism to avoid resuming runtime-suspended devices unnecessarily")
Link: https://lore.kernel.org/linux-pm/20241114220921.2529905-2-saravanak@google.com/
Reported-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Saravana Kannan <saravanak@google.com>
Link: https://patch.msgid.link/12627587.O9o76ZdvQC@rjwysocki.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eeb87d17aceab7803a5a5bcb6cf2817b745157cf ]
The check before setting power.must_resume in device_suspend_noirq()
does not take power.child_count into account, but it should do that, so
use pm_runtime_need_not_resume() in it for this purpose and adjust the
comment next to it accordingly.
Fixes: 107d47b2b95e ("PM: sleep: core: Simplify the SMART_SUSPEND flag handling")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/3353728.44csPzL39Z@rjwysocki.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit bac3b10b78e5 ("driver core: fw_devlink: Stop trying to optimize
cycle detection logic") introduced a new struct device *con_dev and a
get_dev_from_fwnode() call to get it, but without adding a corresponding
put_device().
Closes: https://lore.kernel.org/all/20241204124826.2e055091@booty/
Fixes: bac3b10b78e5 ("driver core: fw_devlink: Stop trying to optimize cycle detection logic")
Cc: stable@vger.kernel.org
Reviewed-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20250213-fix__fw_devlink_relax_cycles_missing_device_put-v2-1-8cd3b03e6a3f@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull driver core api addition from Greg KH: "Here is a driver core new api for 6.14-rc3 that is being added to allow platform devices from stop being abused. It adds a new 'faux_device' structure and bus and api to allow almost a straight or simpler conversion from platform devices that were not really a platform device. It also comes with a binding for rust, with an example driver in rust showing how it's used. I'm adding this now so that the patches that convert the different drivers and subsystems can all start flowing into linux-next now through their different development trees, in time for 6.15-rc1. We have a number that are already reviewed and tested, but adding those conversions now doesn't seem right. For now, no one is using this, and it passes all build tests from 0-day and linux-next, so all should be good" * tag 'driver-core-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: rust/kernel: Add faux device bindings driver core: add a faux bus for use when a simple device/bus is needed
Pull regmap fix from Mark Brown: "A simple fix for memory leaks when deallocating regmap-irq controllers" * tag 'regmap-fix-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap-irq: Add missing kfree()
Many drivers abuse the platform driver/bus system as it provides a simple way to create and bind a device to a driver-specific set of probe/release functions. Instead of doing that, and wasting all of the memory associated with a platform device, here is a "faux" bus that can be used instead. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Danilo Krummrich <dakr@kernel.org> Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Reviewed-by: Zijun Hu <quic_zijuhu@quicinc.com> Link: https://lore.kernel.org/r/2025021026-atlantic-gibberish-3f0c@gregkh Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 3775fc538f53 ("PM: sleep: core: Synchronize runtime PM status of
parents and children") exposed an issue related to simple_pm_bus_pm_ops
that uses pm_runtime_force_suspend() and pm_runtime_force_resume() as
bus type PM callbacks for the noirq phases of system-wide suspend and
resume.
The problem is that pm_runtime_force_suspend() does not distinguish
runtime-suspended devices from devices for which runtime PM has never
been enabled, so if it sees a device with runtime PM status set to
RPM_ACTIVE, it will assume that runtime PM is enabled for that device
and so it will attempt to suspend it with the help of its runtime PM
callbacks which may not be ready for that. As it turns out, this
causes simple_pm_bus_runtime_suspend() to crash due to a NULL pointer
dereference.
Another problem related to the above commit and simple_pm_bus_pm_ops is
that setting runtime PM status of a device handled by the latter to
RPM_ACTIVE will actually prevent it from being resumed because
pm_runtime_force_resume() only resumes devices with runtime PM status
set to RPM_SUSPENDED.
To mitigate these issues, do not allow power.set_active to propagate
beyond the parent of the device with DPM_FLAG_SMART_SUSPEND set that
will need to be resumed, which should be a sufficient stop-gap for the
time being, but they will need to be properly addressed in the future
because in general during system-wide resume it is necessary to resume
all devices in a dependency chain in which at least one device is going
to be resumed.
Fixes: 3775fc538f53 ("PM: sleep: core: Synchronize runtime PM status of parents and children")
Closes: https://lore.kernel.org/linux-pm/1c2433d4-7e0f-4395-b841-b8eac7c25651@nvidia.com/
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/6137505.lOV4Wx5bFT@rjwysocki.net
Add kfree() for "d->main_status_buf" to the error-handling path to prevent
a memory leak.
Fixes: a2d21848d921 ("regmap: regmap-irq: Add main status register support")
Cc: stable@vger.kernel.org # v5.1+
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
Link: https://patch.msgid.link/20250205004343.14413-1-jiashengjiangcool@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull RISC-V updates from Palmer Dabbelt: - The PH1520 pinctrl and dwmac drivers are enabeled in defconfig - A redundant AQRL barrier has been removed from the futex cmpxchg implementation - Support for the T-Head vector extensions, which includes exposing these extensions to userspace on systems that implement them - Some more page table information is now printed on die() and systems that cause PA overflows * tag 'riscv-for-linus-6.14-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: add a warning when physical memory address overflows riscv/mm/fault: add show_pte() before die() riscv: Add ghostwrite vulnerability selftests: riscv: Support xtheadvector in vector tests selftests: riscv: Fix vector tests riscv: hwprobe: Document thead vendor extensions and xtheadvector extension riscv: hwprobe: Add thead vendor extension probing riscv: vector: Support xtheadvector save/restore riscv: Add xtheadvector instruction definitions riscv: csr: Add CSR encodings for CSR_VXRM/CSR_VXSAT RISC-V: define the elements of the VCSR vector CSR riscv: vector: Use vlenb from DT for thead riscv: Add thead and xtheadvector as a vendor extension riscv: dts: allwinner: Add xtheadvector to the D1/D1s devicetree dt-bindings: cpus: add a thead vlen register length property dt-bindings: riscv: Add xtheadvector ISA extension description RISC-V: Mark riscv_v_init() as __init riscv: defconfig: drop RT_GROUP_SCHED=y riscv/futex: Optimize atomic cmpxchg riscv: defconfig: enable pinctrl and dwmac support for TH1520