linux-stable.git/drivers/base, branch v5.15.136

regmap: rbtree: Fix wrong register marked as in-cache when creating new node

2023-10-10T19:59:06+00:00

[ Upstream commit 7a795ac8d49e2433e1b97caf5e99129daf8e1b08 ]

When regcache_rbtree_write() creates a new rbtree_node it was passing the
wrong bit number to regcache_rbtree_set_register(). The bit number is the
offset __in number of registers__, but in the case of creating a new block
regcache_rbtree_write() was not dividing by the address stride to get the
number of registers.

Fix this by dividing by map->reg_stride.
Compare with regcache_rbtree_read() where the bit is checked.

This bug meant that the wrong register was marked as present. The register
that was written to the cache could not be read from the cache because it
was not marked as cached. But a nearby register could be marked as having
a cached value even if it was never written to the cache.

Signed-off-by: Richard Fitzgerald 
Fixes: 3f4ff561bc88 ("regmap: rbtree: Make cache_present bitmap per node")
Link: https://lore.kernel.org/r/20230922153711.28103-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown 
Signed-off-by: Sasha Levin

driver core: test_async: fix an error code

2023-09-19T10:22:45+00:00

[ Upstream commit 22d2381bbd70a5853c2ee77522f4965139672db9 ]

The test_platform_device_register_node() function should return error
pointers instead of NULL.  That is what the callers are expecting.

Fixes: 57ea974fb871 ("driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity")
Signed-off-by: Dan Carpenter 
Link: https://lore.kernel.org/r/1e11ed19-e1f6-43d8-b352-474134b7c008@moroto.mountain
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

regmap: rbtree: Use alloc_flags for memory allocations

2023-09-19T10:22:32+00:00

[ Upstream commit 0c8b0bf42c8cef56f7cd9cd876fbb7ece9217064 ]

The kunit tests discovered a sleeping in atomic bug.  The allocations
in the regcache-rbtree code should use the map->alloc_flags instead of
GFP_KERNEL.

[    5.005510] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:306
[    5.005960] in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 117, name: kunit_try_catch
[    5.006219] preempt_count: 1, expected: 0
[    5.006414] 1 lock held by kunit_try_catch/117:
[    5.006590]  #0: 833b9010 (regmap_kunit:86:(config)->lock){....}-{2:2}, at: regmap_lock_spinlock+0x14/0x1c
[    5.007493] irq event stamp: 162
[    5.007627] hardirqs last  enabled at (161): [<80786738>] crng_make_state+0x1a0/0x294
[    5.007871] hardirqs last disabled at (162): [<80c531ec>] _raw_spin_lock_irqsave+0x7c/0x80
[    5.008119] softirqs last  enabled at (0): [<801110ac>] copy_process+0x810/0x2138
[    5.008356] softirqs last disabled at (0): [<00000000>] 0x0
[    5.008688] CPU: 0 PID: 117 Comm: kunit_try_catch Tainted: G                 N 6.4.4-rc3-g0e8d2fdfb188 #1
[    5.009011] Hardware name: Generic DT based system
[    5.009277]  unwind_backtrace from show_stack+0x18/0x1c
[    5.009497]  show_stack from dump_stack_lvl+0x38/0x5c
[    5.009676]  dump_stack_lvl from __might_resched+0x188/0x2d0
[    5.009860]  __might_resched from __kmem_cache_alloc_node+0x1dc/0x25c
[    5.010061]  __kmem_cache_alloc_node from kmalloc_trace+0x30/0xc8
[    5.010254]  kmalloc_trace from regcache_rbtree_write+0x26c/0x468
[    5.010446]  regcache_rbtree_write from _regmap_write+0x88/0x140
[    5.010634]  _regmap_write from regmap_write+0x44/0x68
[    5.010803]  regmap_write from basic_read_write+0x8c/0x270
[    5.010980]  basic_read_write from kunit_try_run_case+0x48/0xa0

Fixes: 28644c809f44 ("regmap: Add the rbtree cache support")
Reported-by: Guenter Roeck 
Closes: https://lore.kernel.org/all/ee59d128-413c-48ad-a3aa-d9d350c80042@roeck-us.net/
Signed-off-by: Dan Carpenter 
Tested-by: Guenter Roeck 
Link: https://lore.kernel.org/r/58f12a07-5f4b-4a8f-ab84-0a42d1908cb9@moroto.mountain
Signed-off-by: Mark Brown 
Signed-off-by: Sasha Levin

PM: sleep: wakeirq: fix wake irq arming

2023-08-11T13:14:00+00:00

[ Upstream commit 8527beb12087238d4387607597b4020bc393c4b4 ]

The decision whether to enable a wake irq during suspend can not be done
based on the runtime PM state directly as a driver may use wake irqs
without implementing runtime PM. Such drivers specifically leave the
state set to the default 'suspended' and the wake irq is thus never
enabled at suspend.

Add a new wake irq flag to track whether a dedicated wake irq has been
enabled at runtime suspend and therefore must not be enabled at system
suspend.

Note that pm_runtime_enabled() can not be used as runtime PM is always
disabled during late suspend.

Fixes: 69728051f5bf ("PM / wakeirq: Fix unbalanced IRQ enable for wakeirq")
Cc: 4.16+  # 4.16+
Signed-off-by: Johan Hovold 
Reviewed-by: Tony Lindgren 
Tested-by: Tony Lindgren 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin

PM / wakeirq: support enabling wake-up irq after runtime_suspend called

2023-08-11T13:14:00+00:00

[ Upstream commit 259714100d98b50bf04d36a21bf50ca8b829fc11 ]

When the dedicated wake IRQ is level trigger, and it uses the
device's low-power status as the wakeup source, that means if the
device is not in low-power state, the wake IRQ will be triggered
if enabled; For this case, need enable the wake IRQ after running
the device's ->runtime_suspend() which make it enter low-power state.

e.g.
Assume the wake IRQ is a low level trigger type, and the wakeup
signal comes from the low-power status of the device.
The wakeup signal is low level at running time (0), and becomes
high level when the device enters low-power state (runtime_suspend
(1) is called), a wakeup event at (2) make the device exit low-power
state, then the wakeup signal also becomes low level.

                ------------------
               |           ^     ^|
----------------           |     | --------------
 |<---(0)--->|<--(1)--|   (3)   (2)    (4)

if enable the wake IRQ before running runtime_suspend during (0),
a wake IRQ will arise, it causes resume immediately;
it works if enable wake IRQ ( e.g. at (3) or (4)) after running
->runtime_suspend().

This patch introduces a new status WAKE_IRQ_DEDICATED_REVERSE to
optionally support enabling wake IRQ after running ->runtime_suspend().

Suggested-by: Rafael J. Wysocki 
Signed-off-by: Chunfeng Yun 
Signed-off-by: Rafael J. Wysocki 
Stable-dep-of: 8527beb12087 ("PM: sleep: wakeirq: fix wake irq arming")
Signed-off-by: Sasha Levin

x86/srso: Add a Speculative RAS Overflow mitigation

2023-08-08T17:58:34+00:00

Upstream commit: fb3bd914b3ec28f5fb697ac55c4846ac2d542855

Add a mitigation for the speculative return address stack overflow
vulnerability found on AMD processors.

The mitigation works by ensuring all RET instructions speculate to
a controlled location, similar to how speculation is controlled in the
retpoline sequence.  To accomplish this, the __x86_return_thunk forces
the CPU to mispredict every function return using a 'safe return'
sequence.

To ensure the safety of this mitigation, the kernel must ensure that the
safe return sequence is itself free from attacker interference.  In Zen3
and Zen4, this is accomplished by creating a BTB alias between the
untraining function srso_untrain_ret_alias() and the safe return
function srso_safe_ret_alias() which results in evicting a potentially
poisoned BTB entry and using that safe one for all function returns.

In older Zen1 and Zen2, this is accomplished using a reinterpretation
technique similar to Retbleed one: srso_untrain_ret() and
srso_safe_ret().

Signed-off-by: Borislav Petkov (AMD) 
Signed-off-by: Greg Kroah-Hartman

x86/speculation: Add Gather Data Sampling mitigation

2023-08-08T17:58:32+00:00

commit 8974eb588283b7d44a7c91fa09fcbaf380339f3a upstream

Gather Data Sampling (GDS) is a hardware vulnerability which allows
unprivileged speculative access to data which was previously stored in
vector registers.

Intel processors that support AVX2 and AVX512 have gather instructions
that fetch non-contiguous data elements from memory. On vulnerable
hardware, when a gather instruction is transiently executed and
encounters a fault, stale data from architectural or internal vector
registers may get transiently stored to the destination vector
register allowing an attacker to infer the stale data using typical
side channel techniques like cache timing attacks.

This mitigation is different from many earlier ones for two reasons.
First, it is enabled by default and a bit must be set to *DISABLE* it.
This is the opposite of normal mitigation polarity. This means GDS can
be mitigated simply by updating microcode and leaving the new control
bit alone.

Second, GDS has a "lock" bit. This lock bit is there because the
mitigation affects the hardware security features KeyLocker and SGX.
It needs to be enabled and *STAY* enabled for these features to be
mitigated against GDS.

The mitigation is enabled in the microcode by default. Disable it by
setting gather_data_sampling=off or by disabling all mitigations with
mitigations=off. The mitigation status can be checked by reading:

    /sys/devices/system/cpu/vulnerabilities/gather_data_sampling

Signed-off-by: Daniel Sneddon 
Signed-off-by: Dave Hansen 
Acked-by: Josh Poimboeuf 
Signed-off-by: Daniel Sneddon 
Signed-off-by: Greg Kroah-Hartman

regmap: Account for register length in SMBus I/O limits

2023-07-27T06:46:54+00:00

commit 0c9d2eb5e94792fe64019008a04d4df5e57625af upstream.

The SMBus I2C buses have limits on the size of transfers they can do but
do not factor in the register length meaning we may try to do a transfer
longer than our length limit, the core will not take care of this.
Future changes will factor this out into the core but there are a number
of users that assume current behaviour so let's just do something
conservative here.

This does not take account padding bits but practically speaking these
are very rarely if ever used on I2C buses given that they generally run
slowly enough to mean there's no issue.

Cc: stable@kernel.org
Signed-off-by: Mark Brown 
Reviewed-by: Xu Yilun 
Link: https://lore.kernel.org/r/20230712-regmap-max-transfer-v1-2-80e2aed22e83@kernel.org
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

regmap: Drop initial version of maximum transfer length fixes

2023-07-27T06:46:54+00:00

commit bc64734825c59e18a27ac266b07e14944c111fd8 upstream.

When problems were noticed with the register address not being taken
into account when limiting raw transfers with I2C devices we fixed this
in the core.  Unfortunately it has subsequently been realised that a lot
of buses were relying on the prior behaviour, partly due to unclear
documentation not making it obvious what was intended in the core.  This
is all more involved to fix than is sensible for a fix commit so let's
just drop the original fixes, a separate commit will fix the originally
observed problem in an I2C specific way

Fixes: 3981514180c9 ("regmap: Account for register length when chunking")
Fixes: c8e796895e23 ("regmap: spi-avmm: Fix regmap_bus max_raw_write")
Signed-off-by: Mark Brown 
Reviewed-by: Xu Yilun 
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20230712-regmap-max-transfer-v1-1-80e2aed22e83@kernel.org
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

PM: domains: fix integer overflow issues in genpd_parse_state()

2023-07-23T11:46:46+00:00

[ Upstream commit e5d1c8722083f0332dcd3c85fa1273d85fb6bed8 ]

Currently, while calculating residency and latency values, right
operands may overflow if resulting values are big enough.

To prevent this, albeit unlikely case, play it safe and convert
right operands to left ones' type s64.

Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.

Fixes: 30f604283e05 ("PM / Domains: Allow domain power states to be read from DT")
Signed-off-by: Nikita Zhandarovich 
Acked-by: Ulf Hansson 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin