linux-stable.git/drivers/base, branch v5.10.85 Linux kernel stable tree firmware_loader: fix pre-allocated buf built-in firmware use 2021-11-26T09:39:10+00:00 Luis Chamberlain mcgrof@kernel.org 2021-09-17T18:22:13+00:00 c6c9bbe7facb10b03aa3b61ee0f8231a414e209a [ Upstream commit f7a07f7b96033df7709042ff38e998720a3f7119 ] The firmware_loader can be used with a pre-allocated buffer through the use of the API calls: o request_firmware_into_buf() o request_partial_firmware_into_buf() If the firmware was built-in and present, our current check for if the built-in firmware fits into the pre-allocated buffer does not return any errors, and we proceed to tell the caller that everything worked fine. It's a lie and no firmware would end up being copied into the pre-allocated buffer. So if the caller trust the result it may end up writing a bunch of 0's to a device! Fix this by making the function that checks for the pre-allocated buffer return non-void. Since the typical use case is when no pre-allocated buffer is provided make this return successfully for that case. If the built-in firmware does *not* fit into the pre-allocated buffer size return a failure as we should have been doing before. I'm not aware of users of the built-in firmware using the API calls with a pre-allocated buffer, as such I doubt this fixes any real life issue. But you never know... perhaps some oddball private tree might use it. In so far as upstream is concerned this just fixes our code for correctness. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20210917182226.3532898-2-mcgrof@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit f7a07f7b96033df7709042ff38e998720a3f7119 ]

The firmware_loader can be used with a pre-allocated buffer
through the use of the API calls:

  o request_firmware_into_buf()
  o request_partial_firmware_into_buf()

If the firmware was built-in and present, our current check
for if the built-in firmware fits into the pre-allocated buffer
does not return any errors, and we proceed to tell the caller
that everything worked fine. It's a lie and no firmware would
end up being copied into the pre-allocated buffer. So if the
caller trust the result it may end up writing a bunch of 0's
to a device!

Fix this by making the function that checks for the pre-allocated
buffer return non-void. Since the typical use case is when no
pre-allocated buffer is provided make this return successfully
for that case. If the built-in firmware does *not* fit into the
pre-allocated buffer size return a failure as we should have
been doing before.

I'm not aware of users of the built-in firmware using the API
calls with a pre-allocated buffer, as such I doubt this fixes
any real life issue. But you never know... perhaps some oddball
private tree might use it.

In so far as upstream is concerned this just fixes our code for
correctness.

Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20210917182226.3532898-2-mcgrof@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
driver core: Fix possible memory leak in device_link_add() 2021-11-18T13:04:16+00:00 Yang Yingliang yangyingliang@huawei.com 2021-09-30T08:57:14+00:00 e1959450b77a2a9226a818993ea55700872c134b [ Upstream commit df0a18149474c7e6b21f6367fbc6bc8d0f192444 ] I got memory leak as follows: unreferenced object 0xffff88801f0b2200 (size 64): comm "i2c-lis2hh12-21", pid 5455, jiffies 4294944606 (age 15.224s) hex dump (first 32 bytes): 72 65 67 75 6c 61 74 6f 72 3a 72 65 67 75 6c 61 regulator:regula 74 6f 72 2e 30 2d 2d 69 32 63 3a 31 2d 30 30 31 tor.0--i2c:1-001 backtrace: [<00000000bf5b0c3b>] __kmalloc_track_caller+0x19f/0x3a0 [<0000000050da42d9>] kvasprintf+0xb5/0x150 [<000000004bbbed13>] kvasprintf_const+0x60/0x190 [<00000000cdac7480>] kobject_set_name_vargs+0x56/0x150 [<00000000bf83f8e8>] dev_set_name+0xc0/0x100 [<00000000cc1cf7e3>] device_link_add+0x6b4/0x17c0 [<000000009db9faed>] _regulator_get+0x297/0x680 [<00000000845e7f2b>] _devm_regulator_get+0x5b/0xe0 [<000000003958ee25>] st_sensors_power_enable+0x71/0x1b0 [st_sensors] [<000000005f450f52>] st_accel_i2c_probe+0xd9/0x150 [st_accel_i2c] [<00000000b5f2ab33>] i2c_device_probe+0x4d8/0xbe0 [<0000000070fb977b>] really_probe+0x299/0xc30 [<0000000088e226ce>] __driver_probe_device+0x357/0x500 [<00000000c21dda32>] driver_probe_device+0x4e/0x140 [<000000004e650441>] __device_attach_driver+0x257/0x340 [<00000000cf1891b8>] bus_for_each_drv+0x166/0x1e0 When device_register() returns an error, the name allocated in dev_set_name() will be leaked, the put_device() should be used instead of kfree() to give up the device reference, then the name will be freed in kobject_cleanup() and the references of consumer and supplier will be decreased in device_link_release_fn(). Fixes: 287905e68dd2 ("driver core: Expose device link details in sysfs") Reported-by: Hulk Robot <hulkci@huawei.com> Reviewed-by: Saravana Kannan <saravanak@google.com> Reviewed-by: Rafael J. Wysocki <rafael@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20210930085714.2057460-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit df0a18149474c7e6b21f6367fbc6bc8d0f192444 ]

I got memory leak as follows:

unreferenced object 0xffff88801f0b2200 (size 64):
  comm "i2c-lis2hh12-21", pid 5455, jiffies 4294944606 (age 15.224s)
  hex dump (first 32 bytes):
    72 65 67 75 6c 61 74 6f 72 3a 72 65 67 75 6c 61  regulator:regula
    74 6f 72 2e 30 2d 2d 69 32 63 3a 31 2d 30 30 31  tor.0--i2c:1-001
  backtrace:
    [<00000000bf5b0c3b>] __kmalloc_track_caller+0x19f/0x3a0
    [<0000000050da42d9>] kvasprintf+0xb5/0x150
    [<000000004bbbed13>] kvasprintf_const+0x60/0x190
    [<00000000cdac7480>] kobject_set_name_vargs+0x56/0x150
    [<00000000bf83f8e8>] dev_set_name+0xc0/0x100
    [<00000000cc1cf7e3>] device_link_add+0x6b4/0x17c0
    [<000000009db9faed>] _regulator_get+0x297/0x680
    [<00000000845e7f2b>] _devm_regulator_get+0x5b/0xe0
    [<000000003958ee25>] st_sensors_power_enable+0x71/0x1b0 [st_sensors]
    [<000000005f450f52>] st_accel_i2c_probe+0xd9/0x150 [st_accel_i2c]
    [<00000000b5f2ab33>] i2c_device_probe+0x4d8/0xbe0
    [<0000000070fb977b>] really_probe+0x299/0xc30
    [<0000000088e226ce>] __driver_probe_device+0x357/0x500
    [<00000000c21dda32>] driver_probe_device+0x4e/0x140
    [<000000004e650441>] __device_attach_driver+0x257/0x340
    [<00000000cf1891b8>] bus_for_each_drv+0x166/0x1e0

When device_register() returns an error, the name allocated in dev_set_name()
will be leaked, the put_device() should be used instead of kfree() to give up
the device reference, then the name will be freed in kobject_cleanup() and the
references of consumer and supplier will be decreased in device_link_release_fn().

Fixes: 287905e68dd2 ("driver core: Expose device link details in sysfs")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Saravana Kannan <saravanak@google.com>
Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210930085714.2057460-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
PM: sleep: Do not let "syscore" devices runtime-suspend during system transitions 2021-11-18T13:03:46+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2021-10-22T12:58:23+00:00 daccf40320d41fe7241caa8c47584b934b0fe97f commit 928265e3601cde78c7e0a3e518a93b27defed3b1 upstream. There is no reason to allow "syscore" devices to runtime-suspend during system-wide PM transitions, because they are subject to the same possible failure modes as any other devices in that respect. Accordingly, change device_prepare() and device_complete() to call pm_runtime_get_noresume() and pm_runtime_put(), respectively, for "syscore" devices too. Fixes: 057d51a1268f ("Merge branch 'pm-sleep'") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: 3.10+ <stable@vger.kernel.org> # 3.10+ Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 928265e3601cde78c7e0a3e518a93b27defed3b1 upstream.

There is no reason to allow "syscore" devices to runtime-suspend
during system-wide PM transitions, because they are subject to the
same possible failure modes as any other devices in that respect.

Accordingly, change device_prepare() and device_complete() to call
pm_runtime_get_noresume() and pm_runtime_put(), respectively, for
"syscore" devices too.

Fixes: 057d51a1268f ("Merge branch 'pm-sleep'")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 3.10+ <stable@vger.kernel.org> # 3.10+
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
regmap: Fix possible double-free in regcache_rbtree_exit() 2021-11-02T18:48:22+00:00 Yang Yingliang yangyingliang@huawei.com 2021-10-12T02:37:35+00:00 36e911a16b377bde0ad91a8c679069d0d310b1a6 commit 55e6d8037805b3400096d621091dfbf713f97e83 upstream. In regcache_rbtree_insert_to_block(), when 'present' realloc failed, the 'blk' which is supposed to assign to 'rbnode->block' will be freed, so 'rbnode->block' points a freed memory, in the error handling path of regcache_rbtree_init(), 'rbnode->block' will be freed again in regcache_rbtree_exit(), KASAN will report double-free as follows: BUG: KASAN: double-free or invalid-free in kfree+0xce/0x390 Call Trace: slab_free_freelist_hook+0x10d/0x240 kfree+0xce/0x390 regcache_rbtree_exit+0x15d/0x1a0 regcache_rbtree_init+0x224/0x2c0 regcache_init+0x88d/0x1310 __regmap_init+0x3151/0x4a80 __devm_regmap_init+0x7d/0x100 madera_spi_probe+0x10f/0x333 [madera_spi] spi_probe+0x183/0x210 really_probe+0x285/0xc30 To fix this, moving up the assignment of rbnode->block to immediately after the reallocation has succeeded so that the data structure stays valid even if the second reallocation fails. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 3f4ff561bc88b ("regmap: rbtree: Make cache_present bitmap per node") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20211012023735.1632786-1-yangyingliang@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 55e6d8037805b3400096d621091dfbf713f97e83 upstream.

In regcache_rbtree_insert_to_block(), when 'present' realloc failed,
the 'blk' which is supposed to assign to 'rbnode->block' will be freed,
so 'rbnode->block' points a freed memory, in the error handling path of
regcache_rbtree_init(), 'rbnode->block' will be freed again in
regcache_rbtree_exit(), KASAN will report double-free as follows:

BUG: KASAN: double-free or invalid-free in kfree+0xce/0x390
Call Trace:
 slab_free_freelist_hook+0x10d/0x240
 kfree+0xce/0x390
 regcache_rbtree_exit+0x15d/0x1a0
 regcache_rbtree_init+0x224/0x2c0
 regcache_init+0x88d/0x1310
 __regmap_init+0x3151/0x4a80
 __devm_regmap_init+0x7d/0x100
 madera_spi_probe+0x10f/0x333 [madera_spi]
 spi_probe+0x183/0x210
 really_probe+0x285/0xc30

To fix this, moving up the assignment of rbnode->block to immediately after
the reallocation has succeeded so that the data structure stays valid even
if the second reallocation fails.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 3f4ff561bc88b ("regmap: rbtree: Make cache_present bitmap per node")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20211012023735.1632786-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
driver core: Reject pointless SYNC_STATE_ONLY device links 2021-10-20T09:45:01+00:00 Saravana Kannan saravanak@google.com 2021-09-29T19:05:49+00:00 be8ef91d61663bfcc79f5c0eb33f9a26ab74de73 commit f729a592adb6760013c3e48622a5bf256b992452 upstream. SYNC_STATE_ONLY device links intentionally allow cycles because cyclic sync_state() dependencies are valid and necessary. However a SYNC_STATE_ONLY device link where the consumer and the supplier are the same device is pointless because the device link would be deleted as soon as the device probes (because it's also the consumer) and won't affect when the sync_state() callback is called. It's a waste of CPU cycles and memory to create this device link. So reject any attempts to create such a device link. Fixes: 05ef983e0d65 ("driver core: Add device link support for SYNC_STATE_ONLY flag") Cc: stable <stable@vger.kernel.org> Reported-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20210929190549.860541-1-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f729a592adb6760013c3e48622a5bf256b992452 upstream.

SYNC_STATE_ONLY device links intentionally allow cycles because cyclic
sync_state() dependencies are valid and necessary.

However a SYNC_STATE_ONLY device link where the consumer and the supplier
are the same device is pointless because the device link would be deleted
as soon as the device probes (because it's also the consumer) and won't
affect when the sync_state() callback is called. It's a waste of CPU cycles
and memory to create this device link. So reject any attempts to create
such a device link.

Fixes: 05ef983e0d65 ("driver core: Add device link support for SYNC_STATE_ONLY flag")
Cc: stable <stable@vger.kernel.org>
Reported-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210929190549.860541-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PM: sleep: core: Avoid setting power.must_resume to false 2021-09-26T12:08:58+00:00 Prasad Sodagudi psodagud@codeaurora.org 2021-09-07T11:24:23+00:00 c63df77c40ca40979ed8bb02b4a07500eef6cd28 commit 4a9344cd0aa4499beb3772bbecb40bb78888c0e1 upstream. There are variables(power.may_skip_resume and dev->power.must_resume) and DPM_FLAG_MAY_SKIP_RESUME flags to control the resume of devices after a system wide suspend transition. Setting the DPM_FLAG_MAY_SKIP_RESUME flag means that the driver allows its "noirq" and "early" resume callbacks to be skipped if the device can be left in suspend after a system-wide transition into the working state. PM core determines that the driver's "noirq" and "early" resume callbacks should be skipped or not with dev_pm_skip_resume() function by checking power.may_skip_resume variable. power.must_resume variable is getting set to false in __device_suspend() function without checking device's DPM_FLAG_MAY_SKIP_RESUME settings. In problematic scenario, where all the devices in the suspend_late stage are successful and some device can fail to suspend in suspend_noirq phase. So some devices successfully suspended in suspend_late stage are not getting chance to execute __device_suspend_noirq() to set dev->power.must_resume variable to true and not getting resumed in early_resume phase. Add a check for device's DPM_FLAG_MAY_SKIP_RESUME flag before setting power.must_resume variable in __device_suspend function. Fixes: 6e176bf8d461 ("PM: sleep: core: Do not skip callbacks in the resume phase") Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4a9344cd0aa4499beb3772bbecb40bb78888c0e1 upstream.

There are variables(power.may_skip_resume and dev->power.must_resume)
and DPM_FLAG_MAY_SKIP_RESUME flags to control the resume of devices after
a system wide suspend transition.

Setting the DPM_FLAG_MAY_SKIP_RESUME flag means that the driver allows
its "noirq" and "early" resume callbacks to be skipped if the device
can be left in suspend after a system-wide transition into the working
state. PM core determines that the driver's "noirq" and "early" resume
callbacks should be skipped or not with dev_pm_skip_resume() function by
checking power.may_skip_resume variable.

power.must_resume variable is getting set to false in __device_suspend()
function without checking device's DPM_FLAG_MAY_SKIP_RESUME settings.
In problematic scenario, where all the devices in the suspend_late
stage are successful and some device can fail to suspend in
suspend_noirq phase. So some devices successfully suspended in suspend_late
stage are not getting chance to execute __device_suspend_noirq()
to set dev->power.must_resume variable to true and not getting
resumed in early_resume phase.

Add a check for device's DPM_FLAG_MAY_SKIP_RESUME flag before
setting power.must_resume variable in __device_suspend function.

Fixes: 6e176bf8d461 ("PM: sleep: core: Do not skip callbacks in the resume phase")
Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PM: base: power: don't try to use non-existing RTC for storing data 2021-09-22T10:27:54+00:00 Juergen Gross jgross@suse.com 2021-09-03T08:49:36+00:00 cd64b416aed2f152d89c25db2ebf4f05e16fc08d commit 0560204b360a332c321124dbc5cdfd3364533a74 upstream. If there is no legacy RTC device, don't try to use it for storing trace data across suspend/resume. Cc: <stable@vger.kernel.org> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Rafael J. Wysocki <rafael@kernel.org> Link: https://lore.kernel.org/r/20210903084937.19392-2-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 0560204b360a332c321124dbc5cdfd3364533a74 upstream.

If there is no legacy RTC device, don't try to use it for storing trace
data across suspend/resume.

Cc: <stable@vger.kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20210903084937.19392-2-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
driver core: Fix error return code in really_probe() 2021-09-15T07:50:33+00:00 Zhen Lei thunder.leizhen@huawei.com 2021-07-07T07:43:01+00:00 203537ff35eac98544fb35751826e66ea6cb7da6 [ Upstream commit f04948dea236b000da09c466a7ec931ecd8d7867 ] In the case of error handling, the error code returned by the subfunction should be propagated instead of 0. Fixes: 1901fb2604fb ("Driver core: fix "driver" symlink timing") Fixes: 23b6904442d0 ("driver core: add dev_groups to all drivers") Fixes: 8fd456ec0cf0 ("driver core: Add state_synced sysfs file for devices that support it") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Link: https://lore.kernel.org/r/20210707074301.2722-1-thunder.leizhen@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit f04948dea236b000da09c466a7ec931ecd8d7867 ]

In the case of error handling, the error code returned by the subfunction
should be propagated instead of 0.

Fixes: 1901fb2604fb ("Driver core: fix "driver" symlink timing")
Fixes: 23b6904442d0 ("driver core: add dev_groups to all drivers")
Fixes: 8fd456ec0cf0 ("driver core: Add state_synced sysfs file for devices that support it")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210707074301.2722-1-thunder.leizhen@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
firmware: fix theoretical UAF race with firmware cache and resume 2021-09-15T07:50:33+00:00 Zhen Lei thunder.leizhen@huawei.com 2021-07-19T06:45:31+00:00 4225d357bc759c4694db01af06e0f85ed374594b [ Upstream commit 3ecc8cb7c092b2f50e21d2aaaae35b8221ee7214 ] This race was discovered when I carefully analyzed the code to locate another firmware-related UAF issue. It can be triggered only when the firmware load operation is executed during suspend. This possibility is almost impossible because there are few firmware load and suspend actions in the actual environment. CPU0 CPU1 __device_uncache_fw_images(): assign_fw(): fw_cache_piggyback_on_request() <----- P0 spin_lock(&fwc->name_lock); ... list_del(&fce->list); spin_unlock(&fwc->name_lock); uncache_firmware(fce->name); <----- P1 kref_get(&fw_priv->ref); If CPU1 is interrupted at position P0, the new 'fce' has been added to the list fwc->fw_names by the fw_cache_piggyback_on_request(). In this case, CPU0 executes __device_uncache_fw_images() and will be able to see it when it traverses list fwc->fw_names. Before CPU1 executes kref_get() at P1, if CPU0 further executes uncache_firmware(), the count of fw_priv->ref may decrease to 0, causing fw_priv to be released in advance. Move kref_get() to the lock protection range of fwc->name_lock to fix it. Fixes: ac39b3ea73aa ("firmware loader: let caching firmware piggyback on loading firmware") Acked-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Link: https://lore.kernel.org/r/20210719064531.3733-2-thunder.leizhen@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 3ecc8cb7c092b2f50e21d2aaaae35b8221ee7214 ]

This race was discovered when I carefully analyzed the code to locate
another firmware-related UAF issue. It can be triggered only when the
firmware load operation is executed during suspend. This possibility is
almost impossible because there are few firmware load and suspend actions
in the actual environment.

		CPU0			CPU1
__device_uncache_fw_images():		assign_fw():
					fw_cache_piggyback_on_request()
					<----- P0
	spin_lock(&fwc->name_lock);
	...
	list_del(&fce->list);
	spin_unlock(&fwc->name_lock);

	uncache_firmware(fce->name);
					<----- P1
					kref_get(&fw_priv->ref);

If CPU1 is interrupted at position P0, the new 'fce' has been added to the
list fwc->fw_names by the fw_cache_piggyback_on_request(). In this case,
CPU0 executes __device_uncache_fw_images() and will be able to see it when
it traverses list fwc->fw_names. Before CPU1 executes kref_get() at P1, if
CPU0 further executes uncache_firmware(), the count of fw_priv->ref may
decrease to 0, causing fw_priv to be released in advance.

Move kref_get() to the lock protection range of fwc->name_lock to fix it.

Fixes: ac39b3ea73aa ("firmware loader: let caching firmware piggyback on loading firmware")
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210719064531.3733-2-thunder.leizhen@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
regmap: fix the offset of register error log 2021-09-15T07:50:23+00:00 Jeongtae Park jeongtae.park@gmail.com 2021-07-01T14:26:30+00:00 a85985099644700f365743986eb7f24f83c7cad6 [ Upstream commit 1852f5ed358147095297a09cc3c6f160208a676d ] This patch fixes the offset of register error log by using regmap_get_offset(). Signed-off-by: Jeongtae Park <jeongtae.park@gmail.com> Link: https://lore.kernel.org/r/20210701142630.44936-1-jeongtae.park@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 1852f5ed358147095297a09cc3c6f160208a676d ]

This patch fixes the offset of register error log
by using regmap_get_offset().

Signed-off-by: Jeongtae Park <jeongtae.park@gmail.com>
Link: https://lore.kernel.org/r/20210701142630.44936-1-jeongtae.park@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>