linux-stable.git/drivers/base, branch v3.18.17

Driver core: Unified device properties interface for platform firmware

2015-06-28T17:39:20+00:00

[ Upstream commit b31384fa5de37a100507751dfb5c0a49d06cee67 ]

Add a uniform interface by which device drivers can request device
properties from the platform firmware by providing a property name
and the corresponding data type.  The purpose of it is to help to
write portable code that won't depend on any particular platform
firmware interface.

The following general helper functions are added:

device_property_present()
device_property_read_u8()
device_property_read_u16()
device_property_read_u32()
device_property_read_u64()
device_property_read_string()
device_property_read_u8_array()
device_property_read_u16_array()
device_property_read_u32_array()
device_property_read_u64_array()
device_property_read_string_array()

The first one allows the caller to check if the given property is
present.  The next 5 of them allow single-valued properties of
various types to be retrieved in a uniform way.  The remaining 5 are
for reading properties with multiple values (arrays of either numbers
or strings).

The interface covers both ACPI and Device Trees.

This change set includes material from Mika Westerberg and Aaron Lu.

Signed-off-by: Aaron Lu 
Signed-off-by: Mika Westerberg 
Acked-by: Greg Kroah-Hartman 
Acked-by: Grant Likely 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin

driver core: bus: Goto appropriate labels on failure in bus_add_device

2015-05-17T23:12:29+00:00

[ Upstream commit 1c34203a1496d1849ba978021b878b3447d433c8 ]

It is not necessary to call device_remove_groups() when device_add_groups()
fails.

The group added by device_add_groups() should be removed if sysfs_create_link()
fails.

Fixes: fa6fdb33b486 ("driver core: bus_type: add dev_groups")
Signed-off-by: Junjie Mao 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

drivers: platform: parse IRQ flags from resources

2015-05-17T23:12:29+00:00

[ Upstream commit 7085a7401ba54e92bbb5aa24d6f428071e18e509 ]

This fixes a regression from the net subsystem:
After commit d52fdbb735c36a209f36a628d40ca9185b349ba7
"smc91x: retrieve IRQ and trigger flags in a modern way"
a regression would appear on some legacy platforms such
as the ARM PXA Zylonite that specify IRQ resources like
this:

static struct resource r = {
       .start  = X,
       .end    = X,
       .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
};

The previous code would retrieve the resource and parse
the high edge setting in the SMC91x driver, a use pattern
that means every driver specifying an IRQ flag from a
static resource need to parse resource flags and apply
them at runtime.

As we switched the code to use IRQ descriptors to retrieve
the the trigger type like this:

  irqd_get_trigger_type(irq_get_irq_data(...));

the code would work for new platforms using e.g. device
tree as the backing irq descriptor would have its flags
properly set, whereas this kind of oldstyle static
resources at no point assign the trigger flags to the
corresponding IRQ descriptor.

To make the behaviour identical on modern device tree
and legacy static platform data platforms, modify
platform_get_irq() to assign the trigger flags to the
irq descriptor when a client looks up an IRQ from static
resources.

Fixes: d52fdbb735c3 ("smc91x: retrieve IRQ and trigger flags in a modern way")
Tested-by: Robert Jarzmik 
Signed-off-by: Linus Walleij 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

regmap: introduce regmap_name to fix syscon regmap trace events

2015-04-17T00:11:29+00:00

[ Upstream commit c6b570d97c0e77f570bb6b2ed30d372b2b1e9aae ]

This patch fixes a NULL pointer dereference when enabling regmap event
tracing in the presence of a syscon regmap, introduced by commit bdb0066df96e
("mfd: syscon: Decouple syscon interface from platform devices").
That patch introduced syscon regmaps that have their dev field set to NULL.
The regmap trace events expect it to point to a valid struct device and feed
it to dev_name():

  $ echo 1 > /sys/kernel/debug/tracing/events/regmap/enable

  Unable to handle kernel NULL pointer dereference at virtual address 0000002c
  pgd = 80004000
  [0000002c] *pgd=00000000
  Internal error: Oops: 17 [#1] SMP ARM
  Modules linked in: coda videobuf2_vmalloc
  CPU: 0 PID: 304 Comm: kworker/0:2 Not tainted 4.0.0-rc2+ #9197
  Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
  Workqueue: events_freezable thermal_zone_device_check
  task: 9f25a200 ti: 9f1ee000 task.ti: 9f1ee000
  PC is at ftrace_raw_event_regmap_block+0x3c/0xe4
  LR is at _regmap_raw_read+0x1bc/0x1cc
  pc : [<803636e8>]    lr : [<80365f2c>]    psr: 600f0093
  sp : 9f1efd78  ip : 9f1efdb8  fp : 9f1efdb4
  r10: 00000004  r9 : 00000001  r8 : 00000001
  r7 : 00000180  r6 : 00000000  r5 : 9f00e3c0  r4 : 00000003
  r3 : 00000001  r2 : 00000180  r1 : 00000000  r0 : 9f00e3c0
  Flags: nZCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
  Control: 10c5387d  Table: 2d91004a  DAC: 00000015
  Process kworker/0:2 (pid: 304, stack limit = 0x9f1ee210)
  Stack: (0x9f1efd78 to 0x9f1f0000)
  fd60:                                                       9f1efda4 9f1efd88
  fd80: 800708c0 805f9510 80927140 800f0013 9f1fc800 9eb2f490 00000000 00000180
  fda0: 808e3840 00000001 9f1efdfc 9f1efdb8 80365f2c 803636b8 805f8958 800708e0
  fdc0: a00f0013 803636ac 9f16de00 00000180 80927140 9f1fc800 9f1fc800 9f1efe6c
  fde0: 9f1efe6c 9f732400 00000000 00000000 9f1efe1c 9f1efe00 80365f70 80365d7c
  fe00: 80365f3c 9f1fc800 9f1fc800 00000180 9f1efe44 9f1efe20 803656a4 80365f48
  fe20: 9f1fc800 00000180 9f1efe6c 9f1efe6c 9f732400 00000000 9f1efe64 9f1efe48
  fe40: 803657bc 80365634 00000001 9e95f910 9f1fc800 9f1efeb4 9f1efe8c 9f1efe68
  fe60: 80452ac0 80365778 9f1efe8c 9f1efe78 9e93d400 9e93d5e8 9f1efeb4 9f72ef40
  fe80: 9f1efeac 9f1efe90 8044e11c 80452998 8045298c 9e93d608 9e93d400 808e1978
  fea0: 9f1efecc 9f1efeb0 8044fd14 8044e0d0 ffffffff 9f25a200 9e93d608 9e481380
  fec0: 9f1efedc 9f1efed0 8044fde8 8044fcec 9f1eff1c 9f1efee0 80038d50 8044fdd8
  fee0: 9f1ee020 9f72ef40 9e481398 00000000 00000008 9f72ef54 9f1ee020 9f72ef40
  ff00: 9e481398 9e481380 00000008 9f72ef40 9f1eff5c 9f1eff20 80039754 80038bfc
  ff20: 00000000 9e481380 80894100 808e1662 00000000 9e4f2ec0 00000000 9e481380
  ff40: 800396f8 00000000 00000000 00000000 9f1effac 9f1eff60 8003e020 80039704
  ff60: ffffffff 00000000 ffffffff 9e481380 00000000 00000000 9f1eff78 9f1eff78
  ff80: 00000000 00000000 9f1eff88 9f1eff88 9e4f2ec0 8003df30 00000000 00000000
  ffa0: 00000000 9f1effb0 8000eb60 8003df3c 00000000 00000000 00000000 00000000
  ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff ffffffff
  Backtrace:
  [<803636ac>] (ftrace_raw_event_regmap_block) from [<80365f2c>] (_regmap_raw_read+0x1bc/0x1cc)
   r9:00000001 r8:808e3840 r7:00000180 r6:00000000 r5:9eb2f490 r4:9f1fc800
  [<80365d70>] (_regmap_raw_read) from [<80365f70>] (_regmap_bus_read+0x34/0x6c)
   r10:00000000 r9:00000000 r8:9f732400 r7:9f1efe6c r6:9f1efe6c r5:9f1fc800
   r4:9f1fc800
  [<80365f3c>] (_regmap_bus_read) from [<803656a4>] (_regmap_read+0x7c/0x144)
   r6:00000180 r5:9f1fc800 r4:9f1fc800 r3:80365f3c
  [<80365628>] (_regmap_read) from [<803657bc>] (regmap_read+0x50/0x70)
   r9:00000000 r8:9f732400 r7:9f1efe6c r6:9f1efe6c r5:00000180 r4:9f1fc800
  [<8036576c>] (regmap_read) from [<80452ac0>] (imx_get_temp+0x134/0x1a4)
   r6:9f1efeb4 r5:9f1fc800 r4:9e95f910 r3:00000001
  [<8045298c>] (imx_get_temp) from [<8044e11c>] (thermal_zone_get_temp+0x58/0x74)
   r7:9f72ef40 r6:9f1efeb4 r5:9e93d5e8 r4:9e93d400
  [<8044e0c4>] (thermal_zone_get_temp) from [<8044fd14>] (thermal_zone_device_update+0x34/0xec)
   r6:808e1978 r5:9e93d400 r4:9e93d608 r3:8045298c
  [<8044fce0>] (thermal_zone_device_update) from [<8044fde8>] (thermal_zone_device_check+0x1c/0x20)
   r5:9e481380 r4:9e93d608
  [<8044fdcc>] (thermal_zone_device_check) from [<80038d50>] (process_one_work+0x160/0x3d4)
  [<80038bf0>] (process_one_work) from [<80039754>] (worker_thread+0x5c/0x4f4)
   r10:9f72ef40 r9:00000008 r8:9e481380 r7:9e481398 r6:9f72ef40 r5:9f1ee020
   r4:9f72ef54
  [<800396f8>] (worker_thread) from [<8003e020>] (kthread+0xf0/0x108)
   r10:00000000 r9:00000000 r8:00000000 r7:800396f8 r6:9e481380 r5:00000000
   r4:9e4f2ec0
  [<8003df30>] (kthread) from [<8000eb60>] (ret_from_fork+0x14/0x34)
   r7:00000000 r6:00000000 r5:8003df30 r4:9e4f2ec0
  Code: e3140040 1a00001a e3140020 1a000016 (e596002c)
  ---[ end trace 193c15c2494ec960 ]---

Fixes: bdb0066df96e (mfd: syscon: Decouple syscon interface from platform devices)
Signed-off-by: Philipp Zabel 
Signed-off-by: Mark Brown 
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin

regmap: regcache-rbtree: Fix present bitmap resize

2015-04-17T00:11:28+00:00

[ Upstream commit 328f494d95aac8bd4896aea2328bc281053bcb71 ]

When inserting a new register into a block at the lower end the present
bitmap is currently shifted into the wrong direction. The effect of this is
that the bitmap becomes corrupted and registers which are present might be
reported as not present and vice versa.

Fix this by shifting left rather than right.

Fixes: 472fdec7380c("regmap: rbtree: Reduce number of nodes, take 2")
Reported-by: Daniel Baluta 
Signed-off-by: Lars-Peter Clausen 
Signed-off-by: Mark Brown 
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin

driver core: Fix unbalanced device reference in drivers_probe

2015-01-16T14:59:50+00:00

commit bb34cb6bbd287b57e955bc5cfd42fcde6aaca279 upstream.

bus_find_device_by_name() acquires a device reference which is never
released.  This results in an object leak, which on older kernels
results in failure to release all resources of PCI devices.  libvirt
uses drivers_probe to re-attach devices to the host after assignment
and is therefore a common trigger for this leak.

Example:

# cd /sys/bus/pci/
# dmesg -C
# echo 1 > devices/0000\:01\:00.0/sriov_numvfs
# echo 0 > devices/0000\:01\:00.0/sriov_numvfs
# dmesg | grep 01:10
 pci 0000:01:10.0: [8086:10ca] type 00 class 0x020000
 kobject: '0000:01:10.0' (ffff8801d79cd0a8): kobject_add_internal: parent: '0000:00:01.0', set: 'devices'
 kobject: '0000:01:10.0' (ffff8801d79cd0a8): kobject_uevent_env
 kobject: '0000:01:10.0' (ffff8801d79cd0a8): fill_kobj_path: path = '/devices/pci0000:00/0000:00:01.0/0000:01:10.0'
 kobject: '0000:01:10.0' (ffff8801d79cd0a8): kobject_uevent_env
 kobject: '0000:01:10.0' (ffff8801d79cd0a8): fill_kobj_path: path = '/devices/pci0000:00/0000:00:01.0/0000:01:10.0'
 kobject: '0000:01:10.0' (ffff8801d79cd0a8): kobject_uevent_env
 kobject: '0000:01:10.0' (ffff8801d79cd0a8): fill_kobj_path: path = '/devices/pci0000:00/0000:00:01.0/0000:01:10.0'
 kobject: '0000:01:10.0' (ffff8801d79cd0a8): kobject_cleanup, parent           (null)
 kobject: '0000:01:10.0' (ffff8801d79cd0a8): calling ktype release
 kobject: '0000:01:10.0': free name

[kobject freed as expected]

# dmesg -C
# echo 1 > devices/0000\:01\:00.0/sriov_numvfs
# echo 0000:01:10.0 > drivers_probe
# echo 0 > devices/0000\:01\:00.0/sriov_numvfs
# dmesg | grep 01:10
 pci 0000:01:10.0: [8086:10ca] type 00 class 0x020000
 kobject: '0000:01:10.0' (ffff8801d79ce0a8): kobject_add_internal: parent: '0000:00:01.0', set: 'devices'
 kobject: '0000:01:10.0' (ffff8801d79ce0a8): kobject_uevent_env
 kobject: '0000:01:10.0' (ffff8801d79ce0a8): fill_kobj_path: path = '/devices/pci0000:00/0000:00:01.0/0000:01:10.0'
 kobject: '0000:01:10.0' (ffff8801d79ce0a8): kobject_uevent_env
 kobject: '0000:01:10.0' (ffff8801d79ce0a8): fill_kobj_path: path = '/devices/pci0000:00/0000:00:01.0/0000:01:10.0'
 kobject: '0000:01:10.0' (ffff8801d79ce0a8): kobject_uevent_env
 kobject: '0000:01:10.0' (ffff8801d79ce0a8): fill_kobj_path: path = '/devices/pci0000:00/0000:00:01.0/0000:01:10.0'

[no free]

Signed-off-by: Alex Williamson 
Signed-off-by: Greg Kroah-Hartman

Merge branches 'pm-domains', 'pm-sleep' and 'pm-cpufreq'

2014-11-14T14:17:32+00:00

* pm-domains:
  PM / Domains: Fix initial default state of the need_restore flag
  PM / Domains: Change prototype for the attach and detach callbacks

* pm-sleep:
  PM / sleep: Fix entering suspend-to-IDLE if no freeze_oops is set

* pm-cpufreq:
  cpufreq: Avoid crash in resume on SMP without OPP
  cpufreq: cpufreq-dt: Fix arguments in clock failure error message

PM / Domains: Fix initial default state of the need_restore flag

2014-11-11T21:28:44+00:00

The initial state of the device's need_restore flag should'nt depend on
the current state of the PM domain. For example it should be perfectly
valid to attach an inactive device to a powered PM domain.

The pm_genpd_dev_need_restore() API allow us to update the need_restore
flag to somewhat cope with such scenarios. Typically that should have
been done from drivers/buses ->probe() since it's those that put the
requirements on the value of the need_restore flag.

Until recently, the Exynos SOCs were the only user of the
pm_genpd_dev_need_restore() API, though invoking it from a centralized
location while adding devices to their PM domains.

Due to that Exynos now have swithed to the generic OF-based PM domain
look-up, it's no longer possible to invoke the API from a centralized
location. The reason is because devices are now added to their PM
domains during the probe sequence.

Commit "ARM: exynos: Move to generic PM domain DT bindings"
did the switch for Exynos to the generic OF-based PM domain look-up,
but it also removed the call to pm_genpd_dev_need_restore(). This
caused a regression for some of the Exynos drivers.

To handle things more properly in the generic PM domain, let's change
the default initial value of the need_restore flag to reflect that the
state is unknown. As soon as some of the runtime PM callbacks gets
invoked, update the initial value accordingly.

Moreover, since the generic PM domain is verifying that all devices
are both runtime PM enabled and suspended, using pm_runtime_suspended()
while pm_genpd_poweroff() is invoked from the scheduled work, we can be
sure of that the PM domain won't be powering off while having active
devices.

Do note that, the generic PM domain can still only know about active
devices which has been activated through invoking its runtime PM resume
callback. In other words, buses/drivers using pm_runtime_set_active()
during ->probe() will still suffer from a race condition, potentially
probing a device without having its PM domain being powered. That issue
will have to be solved using a different approach.

This a log from the boot regression for Exynos5, which is being fixed in
this patch.

------------[ cut here ]------------
WARNING: CPU: 0 PID: 308 at ../drivers/clk/clk.c:851 clk_disable+0x24/0x30()
Modules linked in:
CPU: 0 PID: 308 Comm: kworker/0:1 Not tainted 3.18.0-rc3-00569-gbd9449f-dirty #10
Workqueue: pm pm_runtime_work
[] (unwind_backtrace) from [] (show_stack+0x10/0x14)
[] (show_stack) from [] (dump_stack+0x70/0xbc)
[] (dump_stack) from [] (warn_slowpath_common+0x64/0x88)
[] (warn_slowpath_common) from [] (warn_slowpath_null+0x1c/0x24)
[] (warn_slowpath_null) from [] (clk_disable+0x24/0x30)
[] (clk_disable) from [] (gsc_runtime_suspend+0x128/0x160)
[] (gsc_runtime_suspend) from [] (pm_generic_runtime_suspend+0x2c/0x38)
[] (pm_generic_runtime_suspend) from [] (pm_genpd_default_save_state+0x2c/0x8c)
[] (pm_genpd_default_save_state) from [] (pm_genpd_poweroff+0x224/0x3ec)
[] (pm_genpd_poweroff) from [] (pm_genpd_runtime_suspend+0x9c/0xcc)
[] (pm_genpd_runtime_suspend) from [] (__rpm_callback+0x2c/0x60)
[] (__rpm_callback) from [] (rpm_callback+0x20/0x74)
[] (rpm_callback) from [] (rpm_suspend+0xd4/0x43c)
[] (rpm_suspend) from [] (pm_runtime_work+0x80/0x90)
[] (pm_runtime_work) from [] (process_one_work+0x12c/0x314)
[] (process_one_work) from [] (worker_thread+0x3c/0x4b0)
[] (worker_thread) from [] (kthread+0xcc/0xe8)
[] (kthread) from [] (ret_from_fork+0x14/0x3c)
---[ end trace 40cd58bcd6988f12 ]---

Fixes: a4a8c2c4962bb655 (ARM: exynos: Move to generic PM domain DT bindings)
Reported-and-tested0by: Sylwester Nawrocki 
Reviewed-by: Sylwester Nawrocki 
Reviewed-by: Kevin Hilman 
Signed-off-by: Ulf Hansson 
Signed-off-by: Rafael J. Wysocki

PM / Domains: Change prototype for the attach and detach callbacks

2014-11-08T01:23:21+00:00

Convert the prototypes to return an int in order to support error
handling in these callbacks.

Also, as suggested by Dmitry Torokhov, pass the domain pointer for use
inside the callbacks, and so that they match the existing
power_on/power_off callbacks which currently take the domain pointer.

Acked-by: Dmitry Torokhov 
Acked-by: Geert Uytterhoeven 
Signed-off-by: Ulf Hansson 
[ khilman: added domain as parameter to callbacks, as suggested by Dmitry ]
Signed-off-by: Kevin Hilman 
Signed-off-by: Rafael J. Wysocki

tiny: rename ENABLE_DEV_COREDUMP to ALLOW_DEV_COREDUMP

2014-11-07T19:07:35+00:00

The ENABLE_DEV_COREDUMP option is misleading as it implies that
it gets the framework enabled, this isn't true it just allows it
to get enabled if a driver needs it.

Rename it to ALLOW_DEV_COREDUMP to better capture its semantics.

Signed-off-by: Johannes Berg 
Reviewed-by: Josh Triplett 
Acked-by: Aristeu Rozanski 
Signed-off-by: Greg Kroah-Hartman