linux-stable.git/drivers/base, branch linux-6.17.y

firmware_loader: make RUST_FW_LOADER_ABSTRACTIONS select FW_LOADER

2025-12-18T12:59:58+00:00

[ Upstream commit 9906efa545d1d2cf25a614eeb219d3f8d5a302cd ]

The use of firmware_loader is an implementation detail of drivers rather
than a dependency. FW_LOADER is typically selected rather than depended
on; the Rust abstractions should do the same thing.

Fixes: de6582833db0 ("rust: add firmware abstractions")
Signed-off-by: Alexandre Courbot 
Link: https://patch.msgid.link/20251106-b4-select-rust-fw-v3-1-771172257755@nvidia.com
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

PM: sleep: core: Fix runtime PM enabling in device_resume_early()

2025-12-01T10:45:41+00:00

commit f384497a76ed9539f70f6e8fe81a193441c943d2 upstream.

Runtime PM should only be enabled in device_resume_early() if it has
been disabled for the given device by device_suspend_late().  Otherwise,
it may cause runtime PM callbacks to run prematurely in some cases
which leads to further functional issues.

Make two changes to address this problem.

First, reorder device_suspend_late() to only disable runtime PM for a
device when it is going to look for the device's callback or if the
device is a "syscore" one.  In all of the other cases, disabling runtime
PM for the device is not in fact necessary.  However, if the device's
callback returns an error and the power.is_late_suspended flag is not
going to be set, enable runtime PM so it only remains disabled when
power.is_late_suspended is set.

Second, make device_resume_early() only enable runtime PM for the
devices with the power.is_late_suspended flag set.

Fixes: 443046d1ad66 ("PM: sleep: Make suspend of devices more asynchronous")
Reported-by: Rose Wu 
Closes: https://lore.kernel.org/linux-pm/70b25dca6f8c2756d78f076f4a7dee7edaaffc33.camel@mediatek.com/
Cc: 6.16+  # 6.16+
Reviewed-by: Ulf Hansson 
Signed-off-by: Rafael J. Wysocki 
Link: https://patch.msgid.link/12784270.O9o76ZdvQC@rafael.j.wysocki
Signed-off-by: Greg Kroah-Hartman

regmap: slimbus: fix bus_context pointer in regmap init calls

2025-11-13T20:36:43+00:00

commit 434f7349a1f00618a620b316f091bd13a12bc8d2 upstream.

Commit 4e65bda8273c ("ASoC: wcd934x: fix error handling in
wcd934x_codec_parse_data()") revealed the problem in the slimbus regmap.
That commit breaks audio playback, for instance, on sdm845 Thundercomm
Dragonboard 845c board:

 Unable to handle kernel paging request at virtual address ffff8000847cbad4
 ...
 CPU: 5 UID: 0 PID: 776 Comm: aplay Not tainted 6.18.0-rc1-00028-g7ea30958b305 #11 PREEMPT
 Hardware name: Thundercomm Dragonboard 845c (DT)
 ...
 Call trace:
  slim_xfer_msg+0x24/0x1ac [slimbus] (P)
  slim_read+0x48/0x74 [slimbus]
  regmap_slimbus_read+0x18/0x24 [regmap_slimbus]
  _regmap_raw_read+0xe8/0x174
  _regmap_bus_read+0x44/0x80
  _regmap_read+0x60/0xd8
  _regmap_update_bits+0xf4/0x140
  _regmap_select_page+0xa8/0x124
  _regmap_raw_write_impl+0x3b8/0x65c
  _regmap_bus_raw_write+0x60/0x80
  _regmap_write+0x58/0xc0
  regmap_write+0x4c/0x80
  wcd934x_hw_params+0x494/0x8b8 [snd_soc_wcd934x]
  snd_soc_dai_hw_params+0x3c/0x7c [snd_soc_core]
  __soc_pcm_hw_params+0x22c/0x634 [snd_soc_core]
  dpcm_be_dai_hw_params+0x1d4/0x38c [snd_soc_core]
  dpcm_fe_dai_hw_params+0x9c/0x17c [snd_soc_core]
  snd_pcm_hw_params+0x124/0x464 [snd_pcm]
  snd_pcm_common_ioctl+0x110c/0x1820 [snd_pcm]
  snd_pcm_ioctl+0x34/0x4c [snd_pcm]
  __arm64_sys_ioctl+0xac/0x104
  invoke_syscall+0x48/0x104
  el0_svc_common.constprop.0+0x40/0xe0
  do_el0_svc+0x1c/0x28
  el0_svc+0x34/0xec
  el0t_64_sync_handler+0xa0/0xf0
  el0t_64_sync+0x198/0x19c

The __devm_regmap_init_slimbus() started to be used instead of
__regmap_init_slimbus() after the commit mentioned above and turns out
the incorrect bus_context pointer (3rd argument) was used in
__devm_regmap_init_slimbus(). It should be just "slimbus" (which is equal
to &slimbus->dev). Correct it. The wcd934x codec seems to be the only or
the first user of devm_regmap_init_slimbus() but we should fix it till
the point where __devm_regmap_init_slimbus() was introduced therefore
two "Fixes" tags.

While at this, also correct the same argument in __regmap_init_slimbus().

Fixes: 4e65bda8273c ("ASoC: wcd934x: fix error handling in wcd934x_codec_parse_data()")
Fixes: 7d6f7fb053ad ("regmap: add SLIMbus support")
Cc: stable@vger.kernel.org
Cc: Dmitry Baryshkov 
Cc: Ma Ke 
Cc: Steev Klimaszewski 
Cc: Srinivas Kandagatla 
Reviewed-by: Abel Vesa 
Signed-off-by: Alexey Klimov 
Reviewed-by: Dmitry Baryshkov 
Link: https://patch.msgid.link/20251022201013.1740211-1-alexey.klimov@linaro.org
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

devcoredump: Fix circular locking dependency with devcd->mutex.

2025-10-29T13:10:23+00:00

commit a91c8096590bd7801a26454789f2992094fe36da upstream.

The original code causes a circular locking dependency found by lockdep.

======================================================
WARNING: possible circular locking dependency detected
6.16.0-rc6-lgci-xe-xe-pw-151626v3+ #1 Tainted: G S   U
------------------------------------------------------
xe_fault_inject/5091 is trying to acquire lock:
ffff888156815688 ((work_completion)(&(&devcd->del_wk)->work)){+.+.}-{0:0}, at: __flush_work+0x25d/0x660

but task is already holding lock:

ffff888156815620 (&devcd->mutex){+.+.}-{3:3}, at: dev_coredump_put+0x3f/0xa0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&devcd->mutex){+.+.}-{3:3}:
       mutex_lock_nested+0x4e/0xc0
       devcd_data_write+0x27/0x90
       sysfs_kf_bin_write+0x80/0xf0
       kernfs_fop_write_iter+0x169/0x220
       vfs_write+0x293/0x560
       ksys_write+0x72/0xf0
       __x64_sys_write+0x19/0x30
       x64_sys_call+0x2bf/0x2660
       do_syscall_64+0x93/0xb60
       entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #1 (kn->active#236){++++}-{0:0}:
       kernfs_drain+0x1e2/0x200
       __kernfs_remove+0xae/0x400
       kernfs_remove_by_name_ns+0x5d/0xc0
       remove_files+0x54/0x70
       sysfs_remove_group+0x3d/0xa0
       sysfs_remove_groups+0x2e/0x60
       device_remove_attrs+0xc7/0x100
       device_del+0x15d/0x3b0
       devcd_del+0x19/0x30
       process_one_work+0x22b/0x6f0
       worker_thread+0x1e8/0x3d0
       kthread+0x11c/0x250
       ret_from_fork+0x26c/0x2e0
       ret_from_fork_asm+0x1a/0x30
-> #0 ((work_completion)(&(&devcd->del_wk)->work)){+.+.}-{0:0}:
       __lock_acquire+0x1661/0x2860
       lock_acquire+0xc4/0x2f0
       __flush_work+0x27a/0x660
       flush_delayed_work+0x5d/0xa0
       dev_coredump_put+0x63/0xa0
       xe_driver_devcoredump_fini+0x12/0x20 [xe]
       devm_action_release+0x12/0x30
       release_nodes+0x3a/0x120
       devres_release_all+0x8a/0xd0
       device_unbind_cleanup+0x12/0x80
       device_release_driver_internal+0x23a/0x280
       device_driver_detach+0x14/0x20
       unbind_store+0xaf/0xc0
       drv_attr_store+0x21/0x50
       sysfs_kf_write+0x4a/0x80
       kernfs_fop_write_iter+0x169/0x220
       vfs_write+0x293/0x560
       ksys_write+0x72/0xf0
       __x64_sys_write+0x19/0x30
       x64_sys_call+0x2bf/0x2660
       do_syscall_64+0x93/0xb60
       entry_SYSCALL_64_after_hwframe+0x76/0x7e
other info that might help us debug this:
Chain exists of: (work_completion)(&(&devcd->del_wk)->work) --> kn->active#236 --> &devcd->mutex
 Possible unsafe locking scenario:
       CPU0                    CPU1
       ----                    ----
  lock(&devcd->mutex);
                               lock(kn->active#236);
                               lock(&devcd->mutex);
  lock((work_completion)(&(&devcd->del_wk)->work));
 *** DEADLOCK ***
5 locks held by xe_fault_inject/5091:
 #0: ffff8881129f9488 (sb_writers#5){.+.+}-{0:0}, at: ksys_write+0x72/0xf0
 #1: ffff88810c755078 (&of->mutex#2){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x123/0x220
 #2: ffff8881054811a0 (&dev->mutex){....}-{3:3}, at: device_release_driver_internal+0x55/0x280
 #3: ffff888156815620 (&devcd->mutex){+.+.}-{3:3}, at: dev_coredump_put+0x3f/0xa0
 #4: ffffffff8359e020 (rcu_read_lock){....}-{1:2}, at: __flush_work+0x72/0x660
stack backtrace:
CPU: 14 UID: 0 PID: 5091 Comm: xe_fault_inject Tainted: G S   U              6.16.0-rc6-lgci-xe-xe-pw-151626v3+ #1 PREEMPT_{RT,(lazy)}
Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER
Hardware name: Micro-Star International Co., Ltd. MS-7D25/PRO Z690-A DDR4(MS-7D25), BIOS 1.10 12/13/2021
Call Trace:
 
 dump_stack_lvl+0x91/0xf0
 dump_stack+0x10/0x20
 print_circular_bug+0x285/0x360
 check_noncircular+0x135/0x150
 ? register_lock_class+0x48/0x4a0
 __lock_acquire+0x1661/0x2860
 lock_acquire+0xc4/0x2f0
 ? __flush_work+0x25d/0x660
 ? mark_held_locks+0x46/0x90
 ? __flush_work+0x25d/0x660
 __flush_work+0x27a/0x660
 ? __flush_work+0x25d/0x660
 ? trace_hardirqs_on+0x1e/0xd0
 ? __pfx_wq_barrier_func+0x10/0x10
 flush_delayed_work+0x5d/0xa0
 dev_coredump_put+0x63/0xa0
 xe_driver_devcoredump_fini+0x12/0x20 [xe]
 devm_action_release+0x12/0x30
 release_nodes+0x3a/0x120
 devres_release_all+0x8a/0xd0
 device_unbind_cleanup+0x12/0x80
 device_release_driver_internal+0x23a/0x280
 ? bus_find_device+0xa8/0xe0
 device_driver_detach+0x14/0x20
 unbind_store+0xaf/0xc0
 drv_attr_store+0x21/0x50
 sysfs_kf_write+0x4a/0x80
 kernfs_fop_write_iter+0x169/0x220
 vfs_write+0x293/0x560
 ksys_write+0x72/0xf0
 __x64_sys_write+0x19/0x30
 x64_sys_call+0x2bf/0x2660
 do_syscall_64+0x93/0xb60
 ? __f_unlock_pos+0x15/0x20
 ? __x64_sys_getdents64+0x9b/0x130
 ? __pfx_filldir64+0x10/0x10
 ? do_syscall_64+0x1a2/0xb60
 ? clear_bhb_loop+0x30/0x80
 ? clear_bhb_loop+0x30/0x80
 entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x76e292edd574
Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d d5 ea 0e 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89
RSP: 002b:00007fffe247a828 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 000076e292edd574
RDX: 000000000000000c RSI: 00006267f6306063 RDI: 000000000000000b
RBP: 000000000000000c R08: 000076e292fc4b20 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000202 R12: 00006267f6306063
R13: 000000000000000b R14: 00006267e6859c00 R15: 000076e29322a000
 
xe 0000:03:00.0: [drm] Xe device coredump has been deleted.

Fixes: 01daccf74832 ("devcoredump : Serialize devcd_del work")
Cc: Mukesh Ojha 
Cc: Greg Kroah-Hartman 
Cc: Johannes Berg 
Cc: Rafael J. Wysocki 
Cc: Danilo Krummrich 
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v6.1+
Signed-off-by: Maarten Lankhorst 
Cc: Matthew Brost 
Acked-by: Mukesh Ojha 
Link: https://lore.kernel.org/r/20250723142416.1020423-1-dev@lankhorst.se
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Greg Kroah-Hartman

arch_topology: Fix incorrect error check in topology_parse_cpu_capacity()

2025-10-29T13:10:21+00:00

commit 2eead19334516c8e9927c11b448fbe512b1f18a1 upstream.

Fix incorrect use of PTR_ERR_OR_ZERO() in topology_parse_cpu_capacity()
which causes the code to proceed with NULL clock pointers. The current
logic uses !PTR_ERR_OR_ZERO(cpu_clk) which evaluates to true for both
valid pointers and NULL, leading to potential NULL pointer dereference
in clk_get_rate().

Per include/linux/err.h documentation, PTR_ERR_OR_ZERO(ptr) returns:
"The error code within @ptr if it is an error pointer; 0 otherwise."

This means PTR_ERR_OR_ZERO() returns 0 for both valid pointers AND NULL
pointers. Therefore !PTR_ERR_OR_ZERO(cpu_clk) evaluates to true (proceed)
when cpu_clk is either valid or NULL, causing clk_get_rate(NULL) to be
called when of_clk_get() returns NULL.

Replace with !IS_ERR_OR_NULL(cpu_clk) which only proceeds for valid
pointers, preventing potential NULL pointer dereference in clk_get_rate().

Cc: stable 
Signed-off-by: Kaushlendra Kumar 
Reviewed-by: Sudeep Holla 
Fixes: b8fe128dad8f ("arch_topology: Adjust initial CPU capacities with current freq")
Link: https://patch.msgid.link/20250923174308.1771906-1-kaushlendra.kumar@intel.com
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Greg Kroah-Hartman

PM: sleep: Do not wait on SYNC_STATE_ONLY device links

2025-10-19T14:37:07+00:00

[ Upstream commit 632d31067be2f414c57955efcf29c79290cc749b ]

Device links with DL_FLAG_SYNC_STATE_ONLY should not affect system
suspend and resume, and functions like device_reorder_to_tail() and
device_link_add() don't try to reorder the consumers with that flag.

However, dpm_wait_for_consumers() and dpm_wait_for_suppliers() don't
check thas flag before triggering dpm_wait(), leading to potential hang
during suspend/resume.

This can be reproduced on MT8186 Corsola Chromebook with devicetree like:

usb-a-connector {
        compatible = "usb-a-connector";
        port {
                usb_a_con: endpoint {
                        remote-endpoint = <&usb_hs>;
                };
        };
};

usb_host {
        compatible = "mediatek,mt8186-xhci", "mediatek,mtk-xhci";
        port {
                usb_hs: endpoint {
                        remote-endpoint = <&usb_a_con>;
                };
        };
};

In this case, the two nodes form a cycle and a SYNC_STATE_ONLY devlink
between usb_host (supplier) and usb-a-connector (consumer) is created.

Address this by exporting device_link_flag_is_sync_state_only() and
making dpm_wait_for_consumers() and dpm_wait_for_suppliers() use it
when deciding if dpm_wait() should be called.

Fixes: 05ef983e0d65a ("driver core: Add device link support for SYNC_STATE_ONLY flag")
Signed-off-by: Pin-yen Lin 
Link: https://patch.msgid.link/20250926102320.4053167-1-treapking@chromium.org
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin

PM: core: Add two macros for walking device links

2025-10-19T14:37:07+00:00

[ Upstream commit 3ce3f569991347d2085925041f4932232da43bcf ]

Add separate macros for walking links to suppliers and consumers of a
device to help device links users to avoid exposing the internals of
struct dev_links_info in their code and possible coding mistakes related
to that.

Accordingly, use the new macros to replace open-coded device links list
walks in the core power management code.

No intentional functional impact.

Signed-off-by: Rafael J. Wysocki 
Reviewed-by: Ulf Hansson 
Acked-by: Greg Kroah-Hartman 
Link: https://patch.msgid.link/1944671.tdWV9SEqCh@rafael.j.wysocki
Stable-dep-of: 632d31067be2 ("PM: sleep: Do not wait on SYNC_STATE_ONLY device links")
Signed-off-by: Sasha Levin

PM: core: Annotate loops walking device links as _srcu

2025-10-19T14:37:07+00:00

[ Upstream commit fdd9ae23bb989fa9ed1beebba7d3e0c82c7c81ae ]

Since SRCU is used for the protection of device link lists, the loops
over device link lists in multiple places in drivers/base/power/main.c
and in pm_runtime_get_suppliers() should be annotated as _srcu rather
than as _rcu which is the case currently.

Change the annotations accordingly.

Signed-off-by: Rafael J. Wysocki 
Reviewed-by: Ulf Hansson 
Acked-by: Greg Kroah-Hartman 
Link: https://patch.msgid.link/2393512.ElGaqSPkdT@rafael.j.wysocki
Stable-dep-of: 632d31067be2 ("PM: sleep: Do not wait on SYNC_STATE_ONLY device links")
Signed-off-by: Sasha Levin

drivers/base/node: fix double free in register_one_node()

2025-10-15T10:04:11+00:00

[ Upstream commit 0efdedfa537eb534c251a5b4794caaf72cc55869 ]

When device_register() fails in register_node(), it calls
put_device(&node->dev).  This triggers node_device_release(), which calls
kfree(to_node(dev)), thereby freeing the entire node structure.

As a result, when register_node() returns an error, the node memory has
already been freed.  Calling kfree(node) again in register_one_node()
leads to a double free.

This patch removes the redundant kfree(node) from register_one_node() to
prevent the double free.

Link: https://lkml.kernel.org/r/20250918054144.58980-1-donettom@linux.ibm.com
Fixes: 786eb990cfb7 ("drivers/base/node: handle error properly in register_one_node()")
Signed-off-by: Donet Tom 
Acked-by: David Hildenbrand 
Acked-by: Oscar Salvador 
Cc: Alison Schofield 
Cc: Chris Mason 
Cc: Danilo Krummrich 
Cc: Dave Jiang 
Cc: Greg Kroah-Hartman 
Cc: Hiroyouki Kamezawa 
Cc: Joanthan Cameron 
Cc: "Ritesh Harjani (IBM)" 
Cc: Yury Norov (NVIDIA) 
Cc: Zi Yan 
Signed-off-by: Andrew Morton 
Signed-off-by: Sasha Levin

drivers/base/node: handle error properly in register_one_node()

2025-10-15T10:03:57+00:00

[ Upstream commit 786eb990cfb78aab94eb74fb32a030e14723a620 ]

If register_node() returns an error, it is not handled correctly.
The function will proceed further and try to register CPUs under the
node, which is not correct.

So, in this patch, if register_node() returns an error, we return
immediately from the function.

Link: https://lkml.kernel.org/r/20250822084845.19219-1-donettom@linux.ibm.com
Fixes: 76b67ed9dce6 ("[PATCH] node hotplug: register cpu: remove node struct")
Signed-off-by: Donet Tom 
Acked-by: David Hildenbrand 
Cc: Alison Schofield 
Cc: Danilo Krummrich 
Cc: Dave Jiang 
Cc: Donet Tom 
Cc: Greg Kroah-Hartman 
Cc: Hiroyouki Kamezawa 
Cc: Joanthan Cameron 
Cc: Oscar Salvador 
Cc: "Ritesh Harjani (IBM)" 
Cc: Yury Norov (NVIDIA) 
Cc: Zi Yan 
Signed-off-by: Andrew Morton 
Signed-off-by: Sasha Levin