linux-stable.git/drivers/base/regmap, branch v5.15.136

regmap: rbtree: Fix wrong register marked as in-cache when creating new node

2023-10-10T19:59:06+00:00

[ Upstream commit 7a795ac8d49e2433e1b97caf5e99129daf8e1b08 ]

When regcache_rbtree_write() creates a new rbtree_node it was passing the
wrong bit number to regcache_rbtree_set_register(). The bit number is the
offset __in number of registers__, but in the case of creating a new block
regcache_rbtree_write() was not dividing by the address stride to get the
number of registers.

Fix this by dividing by map->reg_stride.
Compare with regcache_rbtree_read() where the bit is checked.

This bug meant that the wrong register was marked as present. The register
that was written to the cache could not be read from the cache because it
was not marked as cached. But a nearby register could be marked as having
a cached value even if it was never written to the cache.

Signed-off-by: Richard Fitzgerald 
Fixes: 3f4ff561bc88 ("regmap: rbtree: Make cache_present bitmap per node")
Link: https://lore.kernel.org/r/20230922153711.28103-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown 
Signed-off-by: Sasha Levin

regmap: rbtree: Use alloc_flags for memory allocations

2023-09-19T10:22:32+00:00

[ Upstream commit 0c8b0bf42c8cef56f7cd9cd876fbb7ece9217064 ]

The kunit tests discovered a sleeping in atomic bug.  The allocations
in the regcache-rbtree code should use the map->alloc_flags instead of
GFP_KERNEL.

[    5.005510] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:306
[    5.005960] in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 117, name: kunit_try_catch
[    5.006219] preempt_count: 1, expected: 0
[    5.006414] 1 lock held by kunit_try_catch/117:
[    5.006590]  #0: 833b9010 (regmap_kunit:86:(config)->lock){....}-{2:2}, at: regmap_lock_spinlock+0x14/0x1c
[    5.007493] irq event stamp: 162
[    5.007627] hardirqs last  enabled at (161): [<80786738>] crng_make_state+0x1a0/0x294
[    5.007871] hardirqs last disabled at (162): [<80c531ec>] _raw_spin_lock_irqsave+0x7c/0x80
[    5.008119] softirqs last  enabled at (0): [<801110ac>] copy_process+0x810/0x2138
[    5.008356] softirqs last disabled at (0): [<00000000>] 0x0
[    5.008688] CPU: 0 PID: 117 Comm: kunit_try_catch Tainted: G                 N 6.4.4-rc3-g0e8d2fdfb188 #1
[    5.009011] Hardware name: Generic DT based system
[    5.009277]  unwind_backtrace from show_stack+0x18/0x1c
[    5.009497]  show_stack from dump_stack_lvl+0x38/0x5c
[    5.009676]  dump_stack_lvl from __might_resched+0x188/0x2d0
[    5.009860]  __might_resched from __kmem_cache_alloc_node+0x1dc/0x25c
[    5.010061]  __kmem_cache_alloc_node from kmalloc_trace+0x30/0xc8
[    5.010254]  kmalloc_trace from regcache_rbtree_write+0x26c/0x468
[    5.010446]  regcache_rbtree_write from _regmap_write+0x88/0x140
[    5.010634]  _regmap_write from regmap_write+0x44/0x68
[    5.010803]  regmap_write from basic_read_write+0x8c/0x270
[    5.010980]  basic_read_write from kunit_try_run_case+0x48/0xa0

Fixes: 28644c809f44 ("regmap: Add the rbtree cache support")
Reported-by: Guenter Roeck 
Closes: https://lore.kernel.org/all/ee59d128-413c-48ad-a3aa-d9d350c80042@roeck-us.net/
Signed-off-by: Dan Carpenter 
Tested-by: Guenter Roeck 
Link: https://lore.kernel.org/r/58f12a07-5f4b-4a8f-ab84-0a42d1908cb9@moroto.mountain
Signed-off-by: Mark Brown 
Signed-off-by: Sasha Levin

regmap: Account for register length in SMBus I/O limits

2023-07-27T06:46:54+00:00

commit 0c9d2eb5e94792fe64019008a04d4df5e57625af upstream.

The SMBus I2C buses have limits on the size of transfers they can do but
do not factor in the register length meaning we may try to do a transfer
longer than our length limit, the core will not take care of this.
Future changes will factor this out into the core but there are a number
of users that assume current behaviour so let's just do something
conservative here.

This does not take account padding bits but practically speaking these
are very rarely if ever used on I2C buses given that they generally run
slowly enough to mean there's no issue.

Cc: stable@kernel.org
Signed-off-by: Mark Brown 
Reviewed-by: Xu Yilun 
Link: https://lore.kernel.org/r/20230712-regmap-max-transfer-v1-2-80e2aed22e83@kernel.org
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

regmap: Drop initial version of maximum transfer length fixes

2023-07-27T06:46:54+00:00

commit bc64734825c59e18a27ac266b07e14944c111fd8 upstream.

When problems were noticed with the register address not being taken
into account when limiting raw transfers with I2C devices we fixed this
in the core.  Unfortunately it has subsequently been realised that a lot
of buses were relying on the prior behaviour, partly due to unclear
documentation not making it obvious what was intended in the core.  This
is all more involved to fix than is sensible for a fix commit so let's
just drop the original fixes, a separate commit will fix the originally
observed problem in an I2C specific way

Fixes: 3981514180c9 ("regmap: Account for register length when chunking")
Fixes: c8e796895e23 ("regmap: spi-avmm: Fix regmap_bus max_raw_write")
Signed-off-by: Mark Brown 
Reviewed-by: Xu Yilun 
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20230712-regmap-max-transfer-v1-1-80e2aed22e83@kernel.org
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

regmap: spi-avmm: Fix regmap_bus max_raw_write

2023-06-28T08:29:44+00:00

[ Upstream commit c8e796895e2310b6130e7577248da1d771431a77 ]

The max_raw_write member of the regmap_spi_avmm_bus structure is defined
as:
	.max_raw_write = SPI_AVMM_VAL_SIZE * MAX_WRITE_CNT

SPI_AVMM_VAL_SIZE == 4 and MAX_WRITE_CNT == 1 so this results in a
maximum write transfer size of 4 bytes which provides only enough space to
transfer the address of the target register. It provides no space for the
value to be transferred. This bug became an issue (divide-by-zero in
_regmap_raw_write()) after the following was accepted into mainline:

commit 3981514180c9 ("regmap: Account for register length when chunking")

Change max_raw_write to include space (4 additional bytes) for both the
register address and value:

	.max_raw_write = SPI_AVMM_REG_SIZE + SPI_AVMM_VAL_SIZE * MAX_WRITE_CNT

Fixes: 7f9fb67358a2 ("regmap: add Intel SPI Slave to AVMM Bus Bridge support")
Reviewed-by: Matthew Gerlach 
Signed-off-by: Russ Weight 
Link: https://lore.kernel.org/r/20230620202824.380313-1-russell.h.weight@intel.com
Signed-off-by: Mark Brown 
Signed-off-by: Sasha Levin

regmap: Account for register length when chunking

2023-06-09T08:32:34+00:00

commit 3981514180c987a79ea98f0ae06a7cbf58a9ac0f upstream.

Currently, when regmap_raw_write() splits the data, it uses the
max_raw_write value defined for the bus.  For any bus that includes
the target register address in the max_raw_write value, the chunked
transmission will always exceed the maximum transmission length.
To avoid this problem, subtract the length of the register and the
padding from the maximum transmission.

Signed-off-by: Jim Wylder

regmap: cache: Return error in cache sync operations for REGCACHE_NONE

2023-05-24T16:36:43+00:00

[ Upstream commit fd883d79e4dcd2417c2b80756f22a2ff03b0f6e0 ]

There is no sense in doing a cache sync on REGCACHE_NONE regmaps.
Instead of panicking the kernel due to missing cache_ops, return an error
to client driver.

Signed-off-by: Alexander Stein 
Link: https://lore.kernel.org/r/20230313071812.13577-1-alexander.stein@ew.tq-group.com
Signed-off-by: Mark Brown 
Signed-off-by: Sasha Levin

regmap-irq: Fix offset/index mismatch in read_sub_irq_data()

2022-06-29T07:03:25+00:00

[ Upstream commit 3f05010f243be06478a9b11cfce0ce994f5a0890 ]

We need to divide the sub-irq status register offset by register
stride to get an index for the status buffer to avoid an out of
bounds write when the register stride is greater than 1.

Fixes: a2d21848d921 ("regmap: regmap-irq: Add main status register support")
Signed-off-by: Aidan MacDonald 
Link: https://lore.kernel.org/r/20220620200644.1961936-3-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown 
Signed-off-by: Sasha Levin

regmap-irq: Fix a bug in regmap_irq_enable() for type_in_mask chips

2022-06-29T07:03:25+00:00

[ Upstream commit 485037ae9a095491beb7f893c909a76cc4f9d1e7 ]

When enabling a type_in_mask irq, the type_buf contents must be
AND'd with the mask of the IRQ we're enabling to avoid enabling
other IRQs by accident, which can happen if several type_in_mask
irqs share a mask register.

Fixes: bc998a730367 ("regmap: irq: handle HW using separate rising/falling edge interrupts")
Signed-off-by: Aidan MacDonald 
Link: https://lore.kernel.org/r/20220620200644.1961936-2-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown 
Signed-off-by: Sasha Levin

regmap-irq: Update interrupt clear register for proper reset

2022-03-02T10:48:01+00:00

[ Upstream commit d04ad245d67a3991dfea5e108e4c452c2ab39bac ]

With the existing logic where clear_ack is true (HW doesn’t support
auto clear for ICR), interrupt clear register reset is not handled
properly. Due to this only the first interrupts get processed properly
and further interrupts are blocked due to not resetting interrupt
clear register.

Example for issue case where Invert_ack is false and clear_ack is true:

    Say Default ISR=0x00 & ICR=0x00 and ISR is triggered with 2
    interrupts making ISR = 0x11.

    Step 1: Say ISR is set 0x11 (store status_buff = ISR). ISR needs to
            be cleared with the help of ICR once the Interrupt is processed.

    Step 2: Write ICR = 0x11 (status_buff), this will clear the ISR to 0x00.

    Step 3: Issue - In the existing code, ICR is written with ICR =
            ~(status_buff) i.e ICR = 0xEE -> This will block all the interrupts
            from raising except for interrupts 0 and 4. So expectation here is to
            reset ICR, which will unblock all the interrupts.

            if (chip->clear_ack) {
                 if (chip->ack_invert && !ret)
                  ........
                 else if (!ret)
                     ret = regmap_write(map, reg,
                            ~data->status_buf[i]);

So writing 0 and 0xff (when ack_invert is true) should have no effect, other
than clearing the ACKs just set.

Fixes: 3a6f0fb7b8eb ("regmap: irq: Add support to clear ack registers")
Signed-off-by: Prasad Kumpatla 
Reviewed-by: Charles Keepax 
Tested-by: Marek Szyprowski 
Link: https://lore.kernel.org/r/20220217085007.30218-1-quic_pkumpatl@quicinc.com
Signed-off-by: Mark Brown 
Signed-off-by: Sasha Levin