linux-stable.git/drivers/base/regmap, branch v5.10.147

regmap-irq: Fix a bug in regmap_irq_enable() for type_in_mask chips

2022-06-29T06:59:49+00:00

[ Upstream commit 485037ae9a095491beb7f893c909a76cc4f9d1e7 ]

When enabling a type_in_mask irq, the type_buf contents must be
AND'd with the mask of the IRQ we're enabling to avoid enabling
other IRQs by accident, which can happen if several type_in_mask
irqs share a mask register.

Fixes: bc998a730367 ("regmap: irq: handle HW using separate rising/falling edge interrupts")
Signed-off-by: Aidan MacDonald 
Link: https://lore.kernel.org/r/20220620200644.1961936-2-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown 
Signed-off-by: Sasha Levin

regmap-irq: Update interrupt clear register for proper reset

2022-03-02T10:42:52+00:00

[ Upstream commit d04ad245d67a3991dfea5e108e4c452c2ab39bac ]

With the existing logic where clear_ack is true (HW doesn’t support
auto clear for ICR), interrupt clear register reset is not handled
properly. Due to this only the first interrupts get processed properly
and further interrupts are blocked due to not resetting interrupt
clear register.

Example for issue case where Invert_ack is false and clear_ack is true:

    Say Default ISR=0x00 & ICR=0x00 and ISR is triggered with 2
    interrupts making ISR = 0x11.

    Step 1: Say ISR is set 0x11 (store status_buff = ISR). ISR needs to
            be cleared with the help of ICR once the Interrupt is processed.

    Step 2: Write ICR = 0x11 (status_buff), this will clear the ISR to 0x00.

    Step 3: Issue - In the existing code, ICR is written with ICR =
            ~(status_buff) i.e ICR = 0xEE -> This will block all the interrupts
            from raising except for interrupts 0 and 4. So expectation here is to
            reset ICR, which will unblock all the interrupts.

            if (chip->clear_ack) {
                 if (chip->ack_invert && !ret)
                  ........
                 else if (!ret)
                     ret = regmap_write(map, reg,
                            ~data->status_buf[i]);

So writing 0 and 0xff (when ack_invert is true) should have no effect, other
than clearing the ACKs just set.

Fixes: 3a6f0fb7b8eb ("regmap: irq: Add support to clear ack registers")
Signed-off-by: Prasad Kumpatla 
Reviewed-by: Charles Keepax 
Tested-by: Marek Szyprowski 
Link: https://lore.kernel.org/r/20220217085007.30218-1-quic_pkumpatl@quicinc.com
Signed-off-by: Mark Brown 
Signed-off-by: Sasha Levin

regmap: Call regmap_debugfs_exit() prior to _init()

2022-01-27T09:54:03+00:00

[ Upstream commit 530792efa6cb86f5612ff093333fec735793b582 ]

Since commit cffa4b2122f5 ("regmap: debugfs: Fix a memory leak when
calling regmap_attach_dev"), the following debugfs error is seen
on i.MX boards:

debugfs: Directory 'dummy-iomuxc-gpr@20e0000' with parent 'regmap' already present!

In the attempt to fix the memory leak, the above commit added a NULL check
for map->debugfs_name. For the first debufs entry, map->debugfs_name is NULL
and then the new name is allocated via kasprintf().

For the second debugfs entry, map->debugfs_name() is no longer NULL, so
it will keep using the old entry name and the duplicate name error is seen.

Quoting Mark Brown:

"That means that if the device gets freed we'll end up with the old debugfs
file hanging around pointing at nothing.
...
To be more explicit this means we need a call to regmap_debugfs_exit()
which will clean up all the existing debugfs stuff before we loose
references to it."

Call regmap_debugfs_exit() prior to regmap_debugfs_init() to fix
the problem.

Tested on i.MX6Q and i.MX6SX boards.

Fixes: cffa4b2122f5 ("regmap: debugfs: Fix a memory leak when calling regmap_attach_dev")
Suggested-by: Mark Brown 
Signed-off-by: Fabio Estevam 
Link: https://lore.kernel.org/r/20220107163307.335404-1-festevam@gmail.com
Signed-off-by: Mark Brown 
Signed-off-by: Sasha Levin

regmap: Fix possible double-free in regcache_rbtree_exit()

2021-11-02T18:48:22+00:00

commit 55e6d8037805b3400096d621091dfbf713f97e83 upstream.

In regcache_rbtree_insert_to_block(), when 'present' realloc failed,
the 'blk' which is supposed to assign to 'rbnode->block' will be freed,
so 'rbnode->block' points a freed memory, in the error handling path of
regcache_rbtree_init(), 'rbnode->block' will be freed again in
regcache_rbtree_exit(), KASAN will report double-free as follows:

BUG: KASAN: double-free or invalid-free in kfree+0xce/0x390
Call Trace:
 slab_free_freelist_hook+0x10d/0x240
 kfree+0xce/0x390
 regcache_rbtree_exit+0x15d/0x1a0
 regcache_rbtree_init+0x224/0x2c0
 regcache_init+0x88d/0x1310
 __regmap_init+0x3151/0x4a80
 __devm_regmap_init+0x7d/0x100
 madera_spi_probe+0x10f/0x333 [madera_spi]
 spi_probe+0x183/0x210
 really_probe+0x285/0xc30

To fix this, moving up the assignment of rbnode->block to immediately after
the reallocation has succeeded so that the data structure stays valid even
if the second reallocation fails.

Reported-by: Hulk Robot 
Fixes: 3f4ff561bc88b ("regmap: rbtree: Make cache_present bitmap per node")
Signed-off-by: Yang Yingliang 
Link: https://lore.kernel.org/r/20211012023735.1632786-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

regmap: fix the offset of register error log

2021-09-15T07:50:23+00:00

[ Upstream commit 1852f5ed358147095297a09cc3c6f160208a676d ]

This patch fixes the offset of register error log
by using regmap_get_offset().

Signed-off-by: Jeongtae Park 
Link: https://lore.kernel.org/r/20210701142630.44936-1-jeongtae.park@gmail.com
Signed-off-by: Mark Brown 
Signed-off-by: Sasha Levin

regmap: set debugfs_name to NULL after it is freed

2021-05-14T07:50:09+00:00

[ Upstream commit e41a962f82e7afb5b1ee644f48ad0b3aee656268 ]

There is a upstream commit cffa4b2122f5("regmap:debugfs:
Fix a memory leak when calling regmap_attach_dev") that
adds a if condition when create name for debugfs_name.
With below function invoking logical, debugfs_name is
freed in regmap_debugfs_exit(), but it is not created again
because of the if condition introduced by above commit.
regmap_reinit_cache()
	regmap_debugfs_exit()
	...
	regmap_debugfs_init()
So, set debugfs_name to NULL after it is freed.

Fixes: cffa4b2122f5 ("regmap: debugfs: Fix a memory leak when calling regmap_attach_dev")
Signed-off-by: Meng Li 
Link: https://lore.kernel.org/r/20210226021737.7690-1-Meng.Li@windriver.com
Signed-off-by: Mark Brown 
Signed-off-by: Sasha Levin

regmap: sdw: use _no_pm functions in regmap_read/write

2021-03-04T10:38:15+00:00

[ Upstream commit d288a5712ef961e16d588bbdb2d846e00b5ef154 ]

sdw_update_slave_status will be invoked when a codec is attached,
and the codec driver will initialize the codec with regmap functions
while the codec device is pm_runtime suspended.

regmap routines currently rely on regular SoundWire IO functions,
which will call pm_runtime_get_sync()/put_autosuspend.

This causes a deadlock where the resume routine waits for an
initialization complete signal that while the initialization complete
can only be reached when the resume completes.

The only solution if we allow regmap functions to be used in resume
operations as well as during codec initialization is to use _no_pm
routines. The duty of making sure the bus is operational needs to be
handled above the regmap level.

Fixes: 7c22ce6e21840 ('regmap: Add SoundWire bus support')
Signed-off-by: Bard Liao 
Acked-by: Mark Brown 
Link: https://lore.kernel.org/r/20210122070634.12825-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

regmap: debugfs: Fix a reversed if statement in regmap_debugfs_init()

2021-01-17T13:17:06+00:00

commit f6bcb4c7f366905b66ce8ffca7190118244bb642 upstream.

This code will leak "map->debugfs_name" because the if statement is
reversed so it only frees NULL pointers instead of non-NULL.  In
fact the if statement is not required and should just be removed
because kfree() accepts NULL pointers.

Fixes: cffa4b2122f5 ("regmap: debugfs: Fix a memory leak when calling regmap_attach_dev")
Signed-off-by: Dan Carpenter 
Link: https://lore.kernel.org/r/X/RQpfAwRdLg0GqQ@mwanda
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

regmap: debugfs: Fix a memory leak when calling regmap_attach_dev

2021-01-17T13:17:04+00:00

commit cffa4b2122f5f3e53cf3d529bbc74651f95856d5 upstream.

After initializing the regmap through
syscon_regmap_lookup_by_compatible, then regmap_attach_dev to the
device, because the debugfs_name has been allocated, there is no
need to redistribute it again

unreferenced object 0xd8399b80 (size 64):
  comm "swapper/0", pid 1, jiffies 4294937641 (age 278.590s)
  hex dump (first 32 bytes):
	64 75 6d 6d 79 2d 69 6f 6d 75 78 63 2d 67 70 72
dummy-iomuxc-gpr
	40 32 30 65 34 30 30 30 00 7f 52 5b d8 7e 42 69
@20e4000..R[.~Bi
  backtrace:
    [] kasprintf+0x2c/0x54
    [<6ad3bbc2>] regmap_debugfs_init+0xdc/0x2fc
    [] __regmap_init+0xc38/0xd88
    [<1f7e0609>] of_syscon_register+0x168/0x294
    [<735e8766>] device_node_get_regmap+0x6c/0x98
    [] imx6ul_init_machine+0x20/0x88
    [<0456565b>] customize_machine+0x1c/0x30
    [] do_one_initcall+0x80/0x3ac
    [<7e584867>] kernel_init_freeable+0x170/0x1f0
    [<80074741>] kernel_init+0x8/0x120
    [<285d6f28>] ret_from_fork+0x14/0x20
    [<00000000>] 0x0

Fixes: 9b947a13e7f6 ("regmap: use debugfs even when no device")
Signed-off-by: Xiaolei Wang 
Link: https://lore.kernel.org/r/20201229105046.41984-1-xiaolei.wang@windriver.com
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

Merge remote-tracking branch 'regmap/for-5.10' into regmap-next

2020-10-05T17:53:24+00:00