linux-stable.git/drivers/base/power, branch v5.4.294

PM: sleep: Fix handling devices with direct_complete set on errors

2025-04-10T12:29:40+00:00

[ Upstream commit 03f1444016b71feffa1dfb8a51f15ba592f94b13 ]

When dpm_suspend() fails, some devices with power.direct_complete set
may not have been handled by device_suspend() yet, so runtime PM has
not been disabled for them yet even though power.direct_complete is set.

Since device_resume() expects that runtime PM has been disabled for all
devices with power.direct_complete set, it will attempt to reenable
runtime PM for the devices that have not been processed by device_suspend()
which does not make sense.  Had those devices had runtime PM disabled
before device_suspend() had run, device_resume() would have inadvertently
enable runtime PM for them, but this is not expected to happen because
it would require ->prepare() callbacks to return positive values for
devices with runtime PM disabled, which would be invalid.

In practice, this issue is most likely benign because pm_runtime_enable()
will not allow the "disable depth" counter to underflow, but it causes a
warning message to be printed for each affected device.

To allow device_resume() to distinguish the "direct complete" devices
that have been processed by device_suspend() from those which have not
been handled by it, make device_suspend() set power.is_suspended for
"direct complete" devices.

Next, move the power.is_suspended check in device_resume() before the
power.direct_complete check in it to make it skip the "direct complete"
devices that have not been handled by device_suspend().

This change is based on a preliminary patch from Saravana Kannan.

Fixes: aae4518b3124 ("PM / sleep: Mechanism to avoid resuming runtime-suspended devices unnecessarily")
Link: https://lore.kernel.org/linux-pm/20241114220921.2529905-2-saravanak@google.com/
Reported-by: Saravana Kannan 
Signed-off-by: Rafael J. Wysocki 
Reviewed-by: Saravana Kannan 
Link: https://patch.msgid.link/12627587.O9o76ZdvQC@rjwysocki.net
Signed-off-by: Sasha Levin

PM: sleep: wakeirq: fix wake irq warning in system suspend

2024-04-13T10:51:25+00:00

[ Upstream commit e7a7681c859643f3f2476b2a28a494877fd89442 ]

When driver uses pm_runtime_force_suspend() as the system suspend callback
function and registers the wake irq with reverse enable ordering, the wake
irq will be re-enabled when entering system suspend, triggering an
'Unbalanced enable for IRQ xxx' warning. In this scenario, the call
sequence during system suspend is as follows:
  suspend_devices_and_enter()
    -> dpm_suspend_start()
      -> dpm_run_callback()
        -> pm_runtime_force_suspend()
          -> dev_pm_enable_wake_irq_check()
          -> dev_pm_enable_wake_irq_complete()

    -> suspend_enter()
      -> dpm_suspend_noirq()
        -> device_wakeup_arm_wake_irqs()
          -> dev_pm_arm_wake_irq()

To fix this issue, complete the setting of WAKE_IRQ_DEDICATED_ENABLED flag
in dev_pm_enable_wake_irq_complete() to avoid redundant irq enablement.

Fixes: 8527beb12087 ("PM: sleep: wakeirq: fix wake irq arming")
Reviewed-by: Dhruva Gole 
Signed-off-by: Qingliang Li 
Reviewed-by: Johan Hovold 
Cc: 5.16+  # 5.16+
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin

PM: runtime: Have devm_pm_runtime_enable() handle pm_runtime_dont_use_autosuspend()

2024-02-23T07:25:14+00:00

[ Upstream commit b4060db9251f919506e4d672737c6b8ab9a84701 ]

The PM Runtime docs say:

  Drivers in ->remove() callback should undo the runtime PM changes done
  in ->probe(). Usually this means calling pm_runtime_disable(),
  pm_runtime_dont_use_autosuspend() etc.

>From grepping code, it's clear that many people aren't aware of the
need to call pm_runtime_dont_use_autosuspend().

When brainstorming solutions, one idea that came up was to leverage
the new-ish devm_pm_runtime_enable() function. The idea here is that:

 * When the devm action is called we know that the driver is being
   removed. It's the perfect time to undo the use_autosuspend.

 * The code of pm_runtime_dont_use_autosuspend() already handles the
   case of being called when autosuspend wasn't enabled.

Suggested-by: Laurent Pinchart 
Signed-off-by: Douglas Anderson 
Reviewed-by: Ulf Hansson 
Signed-off-by: Rafael J. Wysocki 
Stable-dep-of: 3d07a411b4fa ("drm/msm/dsi: Use pm_runtime_resume_and_get to prevent refcnt leaks")
Signed-off-by: Amit Pundir 
Signed-off-by: Greg Kroah-Hartman

PM: runtime: add devm_pm_runtime_enable helper

2024-02-23T07:25:14+00:00

[ Upstream commit b3636a3a2c51715736d3ec45f635ed03191962ce ]

A typical code pattern for pm_runtime_enable() call is to call it in the
_probe function and to call pm_runtime_disable() both from _probe error
path and from _remove function. For some drivers the whole remove
function would consist of the call to pm_remove_disable().

Add helper function to replace this bolierplate piece of code. Calling
devm_pm_runtime_enable() removes the need for calling
pm_runtime_disable() both in the probe()'s error path and in the
remove() function.

Signed-off-by: Dmitry Baryshkov 
Link: https://lore.kernel.org/r/20210731195034.979084-2-dmitry.baryshkov@linaro.org
Acked-by: Rafael J. Wysocki 
Signed-off-by: Stephen Boyd 
Stable-dep-of: 3d07a411b4fa ("drm/msm/dsi: Use pm_runtime_resume_and_get to prevent refcnt leaks")
Signed-off-by: Amit Pundir 
Signed-off-by: Greg Kroah-Hartman

pmdomain: core: Move the unused cleanup to a _sync initcall

2024-02-23T07:25:13+00:00

commit 741ba0134fa7822fcf4e4a0a537a5c4cfd706b20 upstream.

The unused clock cleanup uses the _sync initcall to give all users at
earlier initcalls time to probe. Do the same to avoid leaving some PDs
dangling at "on" (which actually happened on qcom!).

Fixes: 2fe71dcdfd10 ("PM / domains: Add late_initcall to disable unused PM domains")
Signed-off-by: Konrad Dybcio 
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231227-topic-pmdomain_sync_cleanup-v1-1-5f36769d538b@linaro.org
Signed-off-by: Ulf Hansson 
Signed-off-by: Greg Kroah-Hartman

PM: runtime: Add pm_runtime_get_if_active()

2023-08-30T14:27:12+00:00

[ Upstream commit c111566bea7ccd8a05e2c56f1fb3cbb6f4b7b441 ]

pm_runtime_get_if_in_use() bumps up the PM-runtime usage count if it
is not equal to zero and the device's PM-runtime status is 'active'.
This works for drivers that do not use autoidle, but for those that
do, the function returns zero even when the device is active.

In order to maintain sane device state while the device is powered on
in the hope that it'll be needed, pm_runtime_get_if_active(dev, true)
returns a positive value if the device's PM-runtime status is 'active'
when it is called, in which case it also increments the device's usage
count.

If the second argument of pm_runtime_get_if_active() is 'false', the
function behaves just like pm_runtime_get_if_in_use(), so redefine
the latter as a wrapper around the former.

Signed-off-by: Sakari Ailus 
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki 
Stable-dep-of: 81302b1c7c99 ("ALSA: hda: Fix unhandled register update during auto-suspend period")
Signed-off-by: Sasha Levin

PM-runtime: add tracepoints for usage_count changes

2023-08-30T14:27:12+00:00

[ Upstream commit d229290689ae0f6eae068ef142de4fd61ab4ba50 ]

Add tracepoints to remaining places where device's power.usage_count
is changed.

This helps debugging where and why autosuspend is prevented.

Signed-off-by: Michał Mirosław 
Signed-off-by: Rafael J. Wysocki 
Stable-dep-of: 81302b1c7c99 ("ALSA: hda: Fix unhandled register update during auto-suspend period")
Signed-off-by: Sasha Levin

PM: sleep: wakeirq: fix wake irq arming

2023-08-11T09:54:00+00:00

[ Upstream commit 8527beb12087238d4387607597b4020bc393c4b4 ]

The decision whether to enable a wake irq during suspend can not be done
based on the runtime PM state directly as a driver may use wake irqs
without implementing runtime PM. Such drivers specifically leave the
state set to the default 'suspended' and the wake irq is thus never
enabled at suspend.

Add a new wake irq flag to track whether a dedicated wake irq has been
enabled at runtime suspend and therefore must not be enabled at system
suspend.

Note that pm_runtime_enabled() can not be used as runtime PM is always
disabled during late suspend.

Fixes: 69728051f5bf ("PM / wakeirq: Fix unbalanced IRQ enable for wakeirq")
Cc: 4.16+  # 4.16+
Signed-off-by: Johan Hovold 
Reviewed-by: Tony Lindgren 
Tested-by: Tony Lindgren 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin

PM / wakeirq: support enabling wake-up irq after runtime_suspend called

2023-08-11T09:54:00+00:00

[ Upstream commit 259714100d98b50bf04d36a21bf50ca8b829fc11 ]

When the dedicated wake IRQ is level trigger, and it uses the
device's low-power status as the wakeup source, that means if the
device is not in low-power state, the wake IRQ will be triggered
if enabled; For this case, need enable the wake IRQ after running
the device's ->runtime_suspend() which make it enter low-power state.

e.g.
Assume the wake IRQ is a low level trigger type, and the wakeup
signal comes from the low-power status of the device.
The wakeup signal is low level at running time (0), and becomes
high level when the device enters low-power state (runtime_suspend
(1) is called), a wakeup event at (2) make the device exit low-power
state, then the wakeup signal also becomes low level.

                ------------------
               |           ^     ^|
----------------           |     | --------------
 |<---(0)--->|<--(1)--|   (3)   (2)    (4)

if enable the wake IRQ before running runtime_suspend during (0),
a wake IRQ will arise, it causes resume immediately;
it works if enable wake IRQ ( e.g. at (3) or (4)) after running
->runtime_suspend().

This patch introduces a new status WAKE_IRQ_DEDICATED_REVERSE to
optionally support enabling wake IRQ after running ->runtime_suspend().

Suggested-by: Rafael J. Wysocki 
Signed-off-by: Chunfeng Yun 
Signed-off-by: Rafael J. Wysocki 
Stable-dep-of: 8527beb12087 ("PM: sleep: wakeirq: fix wake irq arming")
Signed-off-by: Sasha Levin

PM: domains: fix integer overflow issues in genpd_parse_state()

2023-07-27T06:37:06+00:00

[ Upstream commit e5d1c8722083f0332dcd3c85fa1273d85fb6bed8 ]

Currently, while calculating residency and latency values, right
operands may overflow if resulting values are big enough.

To prevent this, albeit unlikely case, play it safe and convert
right operands to left ones' type s64.

Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.

Fixes: 30f604283e05 ("PM / Domains: Allow domain power states to be read from DT")
Signed-off-by: Nikita Zhandarovich 
Acked-by: Ulf Hansson 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin