linux-stable.git/drivers/base/power, branch v5.10.239

PM: runtime: fix denying of auto suspend in pm_suspend_timer_fn()

2025-06-27T10:04:15+00:00

[ Upstream commit 40d3b40dce375d6f1c1dbf08d79eed3aed6c691d ]

pm_runtime_put_autosuspend() schedules a hrtimer to expire
at "dev->power.timer_expires". If the hrtimer's callback,
pm_suspend_timer_fn(), observes that the current time equals
"dev->power.timer_expires", it unexpectedly bails out instead of
proceeding with runtime suspend.

pm_suspend_timer_fn():

 if (expires > 0 && expires < ktime_get_mono_fast_ns()) {
 	dev->power.timer_expires = 0;
 	rpm_suspend(..)
 }

Additionally, as ->timer_expires is not cleared, all the future auto
suspend requests will not schedule hrtimer to perform auto suspend.

rpm_suspend():

 if ((rpmflags & RPM_AUTO) &&...) {
 	if (!(dev->power.timer_expires && ...) { <-- this will fail.
 		hrtimer_start_range_ns(&dev->power.suspend_timer,...);
 	}
 }

Fix this by as well checking if current time reaches the set expiration.

Co-developed-by: Patrick Daly 
Signed-off-by: Patrick Daly 
Signed-off-by: Charan Teja Kalla 
Link: https://patch.msgid.link/20250515064125.1211561-1-quic_charante@quicinc.com
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin

pmdomain: core: Fix error checking in genpd_dev_pm_attach_by_id()

2025-06-27T10:04:07+00:00

[ Upstream commit 0f5757667ec0aaf2456c3b76fcf0c6c3ea3591fe ]

The error checking for of_count_phandle_with_args() does not handle
negative error codes correctly.  The problem is that "index" is a u32 so
in the condition "if (index >= num_domains)" negative error codes stored
in "num_domains" are type promoted to very high positive values and
"index" is always going to be valid.

Test for negative error codes first and then test if "index" is valid.

Fixes: 3ccf3f0cd197 ("PM / Domains: Enable genpd_dev_pm_attach_by_id|name() for single PM domain")
Signed-off-by: Dan Carpenter 
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/aBxPQ8AI8N5v-7rL@stanley.mountain
Signed-off-by: Ulf Hansson 
Signed-off-by: Sasha Levin

PM: sleep: Fix power.is_suspended cleanup for direct-complete devices

2025-06-27T10:04:07+00:00

[ Upstream commit d46c4c839c20a599a0eb8d73708ce401f9c7d06d ]

Commit 03f1444016b7 ("PM: sleep: Fix handling devices with direct_complete
set on errors") caused power.is_suspended to be set for devices with
power.direct_complete set, but it forgot to ensure the clearing of that
flag for them in device_resume(), so power.is_suspended is still set for
them during the next system suspend-resume cycle.

If that cycle is aborted in dpm_suspend(), the subsequent invocation of
dpm_resume() will trigger a device_resume() call for every device and
because power.is_suspended is set for the devices in question, they will
not be skipped by device_resume() as expected which causes scary error
messages to be logged (as appropriate).

To address this issue, move the clearing of power.is_suspended in
device_resume() immediately after the power.is_suspended check so it
will be always cleared for all devices processed by that function.

Fixes: 03f1444016b7 ("PM: sleep: Fix handling devices with direct_complete set on errors")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4280
Reported-and-tested-by: Chris Bainbridge 
Signed-off-by: Rafael J. Wysocki 
Reviewed-by: Mario Limonciello 
Link: https://patch.msgid.link/4990586.GXAFRqVoOG@rjwysocki.net
Signed-off-by: Sasha Levin

PM: sleep: Fix handling devices with direct_complete set on errors

2025-04-10T12:30:55+00:00

[ Upstream commit 03f1444016b71feffa1dfb8a51f15ba592f94b13 ]

When dpm_suspend() fails, some devices with power.direct_complete set
may not have been handled by device_suspend() yet, so runtime PM has
not been disabled for them yet even though power.direct_complete is set.

Since device_resume() expects that runtime PM has been disabled for all
devices with power.direct_complete set, it will attempt to reenable
runtime PM for the devices that have not been processed by device_suspend()
which does not make sense.  Had those devices had runtime PM disabled
before device_suspend() had run, device_resume() would have inadvertently
enable runtime PM for them, but this is not expected to happen because
it would require ->prepare() callbacks to return positive values for
devices with runtime PM disabled, which would be invalid.

In practice, this issue is most likely benign because pm_runtime_enable()
will not allow the "disable depth" counter to underflow, but it causes a
warning message to be printed for each affected device.

To allow device_resume() to distinguish the "direct complete" devices
that have been processed by device_suspend() from those which have not
been handled by it, make device_suspend() set power.is_suspended for
"direct complete" devices.

Next, move the power.is_suspended check in device_resume() before the
power.direct_complete check in it to make it skip the "direct complete"
devices that have not been handled by device_suspend().

This change is based on a preliminary patch from Saravana Kannan.

Fixes: aae4518b3124 ("PM / sleep: Mechanism to avoid resuming runtime-suspended devices unnecessarily")
Link: https://lore.kernel.org/linux-pm/20241114220921.2529905-2-saravanak@google.com/
Reported-by: Saravana Kannan 
Signed-off-by: Rafael J. Wysocki 
Reviewed-by: Saravana Kannan 
Link: https://patch.msgid.link/12627587.O9o76ZdvQC@rjwysocki.net
Signed-off-by: Sasha Levin

PM: sleep: Adjust check before setting power.must_resume

2025-04-10T12:30:55+00:00

[ Upstream commit eeb87d17aceab7803a5a5bcb6cf2817b745157cf ]

The check before setting power.must_resume in device_suspend_noirq()
does not take power.child_count into account, but it should do that, so
use pm_runtime_need_not_resume() in it for this purpose and adjust the
comment next to it accordingly.

Fixes: 107d47b2b95e ("PM: sleep: core: Simplify the SMART_SUSPEND flag handling")
Signed-off-by: Rafael J. Wysocki 
Reviewed-by: Ulf Hansson 
Link: https://patch.msgid.link/3353728.44csPzL39Z@rjwysocki.net
Signed-off-by: Sasha Levin

PM: sleep: wakeirq: fix wake irq warning in system suspend

2024-04-13T10:58:18+00:00

[ Upstream commit e7a7681c859643f3f2476b2a28a494877fd89442 ]

When driver uses pm_runtime_force_suspend() as the system suspend callback
function and registers the wake irq with reverse enable ordering, the wake
irq will be re-enabled when entering system suspend, triggering an
'Unbalanced enable for IRQ xxx' warning. In this scenario, the call
sequence during system suspend is as follows:
  suspend_devices_and_enter()
    -> dpm_suspend_start()
      -> dpm_run_callback()
        -> pm_runtime_force_suspend()
          -> dev_pm_enable_wake_irq_check()
          -> dev_pm_enable_wake_irq_complete()

    -> suspend_enter()
      -> dpm_suspend_noirq()
        -> device_wakeup_arm_wake_irqs()
          -> dev_pm_arm_wake_irq()

To fix this issue, complete the setting of WAKE_IRQ_DEDICATED_ENABLED flag
in dev_pm_enable_wake_irq_complete() to avoid redundant irq enablement.

Fixes: 8527beb12087 ("PM: sleep: wakeirq: fix wake irq arming")
Reviewed-by: Dhruva Gole 
Signed-off-by: Qingliang Li 
Reviewed-by: Johan Hovold 
Cc: 5.16+  # 5.16+
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin

PM: runtime: Have devm_pm_runtime_enable() handle pm_runtime_dont_use_autosuspend()

2024-02-23T07:42:32+00:00

[ Upstream commit b4060db9251f919506e4d672737c6b8ab9a84701 ]

The PM Runtime docs say:

  Drivers in ->remove() callback should undo the runtime PM changes done
  in ->probe(). Usually this means calling pm_runtime_disable(),
  pm_runtime_dont_use_autosuspend() etc.

>From grepping code, it's clear that many people aren't aware of the
need to call pm_runtime_dont_use_autosuspend().

When brainstorming solutions, one idea that came up was to leverage
the new-ish devm_pm_runtime_enable() function. The idea here is that:

 * When the devm action is called we know that the driver is being
   removed. It's the perfect time to undo the use_autosuspend.

 * The code of pm_runtime_dont_use_autosuspend() already handles the
   case of being called when autosuspend wasn't enabled.

Suggested-by: Laurent Pinchart 
Signed-off-by: Douglas Anderson 
Reviewed-by: Ulf Hansson 
Signed-off-by: Rafael J. Wysocki 
Stable-dep-of: 3d07a411b4fa ("drm/msm/dsi: Use pm_runtime_resume_and_get to prevent refcnt leaks")
Signed-off-by: Amit Pundir 
Signed-off-by: Greg Kroah-Hartman

PM: runtime: add devm_pm_runtime_enable helper

2024-02-23T07:42:32+00:00

[ Upstream commit b3636a3a2c51715736d3ec45f635ed03191962ce ]

A typical code pattern for pm_runtime_enable() call is to call it in the
_probe function and to call pm_runtime_disable() both from _probe error
path and from _remove function. For some drivers the whole remove
function would consist of the call to pm_remove_disable().

Add helper function to replace this bolierplate piece of code. Calling
devm_pm_runtime_enable() removes the need for calling
pm_runtime_disable() both in the probe()'s error path and in the
remove() function.

Signed-off-by: Dmitry Baryshkov 
Link: https://lore.kernel.org/r/20210731195034.979084-2-dmitry.baryshkov@linaro.org
Acked-by: Rafael J. Wysocki 
Signed-off-by: Stephen Boyd 
Stable-dep-of: 3d07a411b4fa ("drm/msm/dsi: Use pm_runtime_resume_and_get to prevent refcnt leaks")
Signed-off-by: Amit Pundir 
Signed-off-by: Greg Kroah-Hartman

pmdomain: core: Move the unused cleanup to a _sync initcall

2024-02-23T07:42:29+00:00

commit 741ba0134fa7822fcf4e4a0a537a5c4cfd706b20 upstream.

The unused clock cleanup uses the _sync initcall to give all users at
earlier initcalls time to probe. Do the same to avoid leaving some PDs
dangling at "on" (which actually happened on qcom!).

Fixes: 2fe71dcdfd10 ("PM / domains: Add late_initcall to disable unused PM domains")
Signed-off-by: Konrad Dybcio 
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231227-topic-pmdomain_sync_cleanup-v1-1-5f36769d538b@linaro.org
Signed-off-by: Ulf Hansson 
Signed-off-by: Greg Kroah-Hartman

PM: sleep: Fix error handling in dpm_prepare()

2024-02-23T07:42:18+00:00

[ Upstream commit 544e737dea5ad1a457f25dbddf68761ff25e028b ]

Commit 2aa36604e824 ("PM: sleep: Avoid calling put_device() under
dpm_list_mtx") forgot to update the while () loop termination
condition to also break the loop if error is nonzero, which
causes the loop to become infinite if device_prepare() returns
an error for one device.

Add the missing !error check.

Fixes: 2aa36604e824 ("PM: sleep: Avoid calling put_device() under dpm_list_mtx")
Signed-off-by: Rafael J. Wysocki 
Reported-by: Thomas Hellström 
Reviewed-by: Thomas Hellström 
Reviewed-by: Ulf Hansson 
Cc: All applicable 
Signed-off-by: Sasha Levin