linux-stable.git/drivers/base/power, branch v4.9.232

PM / core: Propagate dev->power.wakeup_path when no callbacks

2019-05-31T13:48:26+00:00

[ Upstream commit dc351d4c5f4fe4d0f274d6d660227be0c3a03317 ]

The dev->power.direct_complete flag may become set in device_prepare() in
case the device don't have any PM callbacks (dev->power.no_pm_callbacks is
set). This leads to a broken behaviour, when there is child having wakeup
enabled and relies on its parent to be used in the wakeup path.

More precisely, when the direct complete path becomes selected for the
child in __device_suspend(), the propagation of the dev->power.wakeup_path
becomes skipped as well.

Let's address this problem, by checking if the device is a part the wakeup
path or has wakeup enabled, then prevent the direct complete path from
being used.

Reported-by: Loic Pallardy 
Signed-off-by: Ulf Hansson 
[ rjw: Comment cleanup ]
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin

PM / wakeup: Rework wakeup source timer cancellation

2019-03-23T12:19:53+00:00

commit 1fad17fb1bbcd73159c2b992668a6957ecc5af8a upstream.

If wakeup_source_add() is called right after wakeup_source_remove()
for the same wakeup source, timer_setup() may be called for a
potentially scheduled timer which is incorrect.

To avoid that, move the wakeup source timer cancellation from
wakeup_source_drop() to wakeup_source_remove().

Moreover, make wakeup_source_remove() clear the timer function after
canceling the timer to let wakeup_source_not_registered() treat
unregistered wakeup sources in the same way as the ones that have
never been registered.

Signed-off-by: Viresh Kumar 
Cc: 4.4+  # 4.4+
[ rjw: Subject, changelog, merged two patches together ]
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

PM / core: Clear the direct_complete flag on errors

2018-10-13T07:18:54+00:00

commit 69e445ab8b66a9f30519842ef18be555d3ee9b51 upstream.

If __device_suspend() runs asynchronously (in which case the device
passed to it is in dpm_suspended_list at that point) and it returns
early on an error or pending wakeup, and the power.direct_complete
flag has been set for the device already, the subsequent
device_resume() will be confused by that and it will call
pm_runtime_enable() incorrectly, as runtime PM has not been
disabled for the device by __device_suspend().

To avoid that, clear power.direct_complete if __device_suspend()
is not going to disable runtime PM for the device before returning.

Fixes: aae4518b3124 (PM / sleep: Mechanism to avoid resuming runtime-suspended devices unnecessarily)
Reported-by: Al Cooper 
Tested-by: Al Cooper 
Reviewed-by: Ulf Hansson 
Cc: 3.16+  # 3.16+
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

PM / clk: signedness bug in of_pm_clk_add_clks()

2018-09-05T07:20:11+00:00

commit 5e2e2f9f76e157063a656351728703cb02b068f1 upstream.

"count" needs to be signed for the error handling to work.  I made "i"
signed as well so they match.

Fixes: 02113ba93ea4 (PM / clk: Add support for obtaining clocks from device-tree)
Cc: 4.6+  # 4.6+
Signed-off-by: Dan Carpenter 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

PM / OPP: Update voltage in case freq == old_freq

2018-07-11T14:26:45+00:00

commit c5c2a97b3ac7d1ec19e7cff9e38caca6afefc3de upstream.

This commit fixes a rare but possible case when the clk rate is updated
without update of the regulator voltage.

At boot up, CPUfreq checks if the system is running at the right freq. This
is a sanity check in case a bootloader set clk rate that is outside of freq
table present with cpufreq core. In such cases system can be unstable so
better to change it to a freq that is preset in freq-table.

The CPUfreq takes next freq that is >= policy->cur and this is our
target_freq that needs to be set now.

dev_pm_opp_set_rate(dev, target_freq) checks the target_freq and the
old_freq (a current rate). If these are equal it returns early. If not,
it searches for OPP (old_opp) that fits best to old_freq (not listed in
the table) and updates old_freq (!).

Here, we can end up with old_freq = old_opp.rate = target_freq, which
is not handled in _generic_set_opp_regulator(). It's supposed to update
voltage only when freq > old_freq  || freq > old_freq.

if (freq > old_freq) {
		ret = _set_opp_voltage(dev, reg, new_supply);
[...]
if (freq < old_freq) {
		ret = _set_opp_voltage(dev, reg, new_supply);
		if (ret)

It results in, no voltage update while clk rate is updated.

Example:
freq-table = {
	1000MHz   1.15V
	 666MHZ   1.10V
	 333MHz   1.05V
}
boot-up-freq        = 800MHz   # not listed in freq-table
freq = target_freq  = 1GHz
old_freq            = 800Mhz
old_opp = _find_freq_ceil(opp_table, &old_freq);  #(old_freq is modified!)
old_freq            = 1GHz

Fixes: 6a0712f6f199 ("PM / OPP: Add dev_pm_opp_set_rate()")
Cc: 4.6+  # v4.6+
Signed-off-by: Waldemar Rymarkiewicz 
Signed-off-by: Viresh Kumar 
Signed-off-by: Greg Kroah-Hartman

PM / OPP: Move error message to debug level

2017-12-25T13:23:44+00:00

[ Upstream commit 035ed07208dc501d023873447113f3f178592156 ]

On some i.MX6 platforms which do not have speed grading
check, opp table will not be created in platform code,
so cpufreq driver prints the following error message:

cpu cpu0: dev_pm_opp_get_opp_count: OPP table not found (-19)

However, this is not really an error in this case because the
imx6q-cpufreq driver first calls dev_pm_opp_get_opp_count()
and if it fails, it means that platform code does not provide
OPP and then dev_pm_opp_of_add_table() will be called.

In order to avoid such confusing error message, move it to
debug level.

It is up to the caller of dev_pm_opp_get_opp_count() to check its
return value and decide if it will print an error or not.

Signed-off-by: Fabio Estevam 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

PM / OPP: Add missing of_node_put(np)

2017-11-30T08:39:09+00:00

commit 7978db344719dab1e56d05e6fc04aaaddcde0a5e upstream.

The for_each_available_child_of_node() loop in _of_add_opp_table_v2()
doesn't drop the reference to "np" on errors. Fix that.

Fixes: 274659029c9d (PM / OPP: Add support to parse "operating-points-v2" bindings)
Signed-off-by: Tobias Jordan 
[ VK: Improved commit log. ]
Signed-off-by: Viresh Kumar 
Reviewed-by: Stephen Boyd 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

PM / OPP: Error out on failing to add static OPPs for v1 bindings

2017-11-15T14:53:12+00:00

[ Upstream commit 04a86a84c42ca18f37ab446127dc619b41dd3b23 ]

The code adding static OPPs for V2 bindings already does so. Make the V1
bindings specific code behave the same.

Signed-off-by: Viresh Kumar 
Reviewed-by: Stephen Boyd 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

PM / wakeirq: report a wakeup_event on dedicated wekup irq

2017-11-08T09:08:33+00:00

[ Upstream commit 09bb6e93956ae5175b96905b723ec879c3ca0765 ]

There are two reasons for reporting wakeup event when dedicated wakeup
IRQ is triggered:

- wakeup events accounting, so proper statistical data will be
  displayed in sysfs and debugfs;

- there are small window when System is entering suspend during which
  dedicated wakeup IRQ can be lost:

dpm_suspend_noirq()
  |- device_wakeup_arm_wake_irqs()
      |- dev_pm_arm_wake_irq(X)
         |- IRQ is enabled and marked as wakeup source
[1]...
  |- suspend_device_irqs()
     |- suspend_device_irq(X)
	|- irqd_set(X, IRQD_WAKEUP_ARMED);
	   |- wakup IRQ armed

The wakeup IRQ can be lost if it's triggered at point [1]
and not armed yet.

Hence, fix above cases by adding simple pm_wakeup_event() call in
handle_threaded_wake_irq().

Fixes: 4990d4fe327b (PM / Wakeirq: Add automated device wake IRQ handling)
Signed-off-by: Grygorii Strashko 
Tested-by: Keerthy 
[ tony@atomide.com: added missing return to avoid warnings ]
Tested-by: Tony Lindgren 
Signed-off-by: Tony Lindgren 
Signed-off-by: Rafael J. Wysocki 

Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

PM: core: Fix device_pm_check_callbacks()

2017-10-05T07:44:01+00:00

commit 157c460e10cb6eca29ccbd0f023db159d0c55ec7 upstream.

The device_pm_check_callbacks() function doesn't check legacy
->suspend and ->resume callback pointers under the device's
bus type, class and driver, so in some cases it may set the
no_pm_callbacks flag for the device incorrectly and then the
callbacks may be skipped during system suspend/resume, which
shouldn't happen.

Fixes: aa8e54b55947 (PM / sleep: Go direct_complete if driver has no callbacks)
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman