linux-stable.git/drivers/base/power, branch v4.14.166

PM / Domains: Deal with multiple states but no governor in genpd

2019-12-01T08:13:38+00:00

[ Upstream commit 2c9b7f8772033cc8bafbd4eefe2ca605bf3eb094 ]

A caller of pm_genpd_init() that provides some states for the genpd via the
->states pointer in the struct generic_pm_domain, should also provide a
governor. This because it's the job of the governor to pick a state that
satisfies the constraints.

Therefore, let's print a warning to inform the user about such bogus
configuration and avoid to bail out, by instead picking the shallowest
state before genpd invokes the ->power_off() callback.

Signed-off-by: Ulf Hansson 
Reviewed-by: Lina Iyer 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin

Revert "OPP: Protect dev_list with opp_table lock"

2019-11-24T07:22:45+00:00

This reverts commit 714ab224a8db6e8255c61a42613de9349ceb0bba which is
commit 3d2556992a878a2210d3be498416aee39e0c32aa upstream.

Turns out to break the build on the odroid machines, so it needs to be
reverted.

Reported-by: Viresh Kumar 
Reported-by: "kernelci.org bot" 
Cc: Niklas Cassel 
Cc: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

OPP: Protect dev_list with opp_table lock

2019-11-20T17:00:13+00:00

[ Upstream commit 3d2556992a878a2210d3be498416aee39e0c32aa ]

The dev_list needs to be protected with a lock, else we may have
simultaneous access (addition/removal) to it and that would be racy.
Extend scope of the opp_table lock to protect dev_list as well.

Tested-by: Niklas Cassel 
Signed-off-by: Viresh Kumar 
Signed-off-by: Sasha Levin

PM / core: Propagate dev->power.wakeup_path when no callbacks

2019-05-31T13:47:28+00:00

[ Upstream commit dc351d4c5f4fe4d0f274d6d660227be0c3a03317 ]

The dev->power.direct_complete flag may become set in device_prepare() in
case the device don't have any PM callbacks (dev->power.no_pm_callbacks is
set). This leads to a broken behaviour, when there is child having wakeup
enabled and relies on its parent to be used in the wakeup path.

More precisely, when the direct complete path becomes selected for the
child in __device_suspend(), the propagation of the dev->power.wakeup_path
becomes skipped as well.

Let's address this problem, by checking if the device is a part the wakeup
path or has wakeup enabled, then prevent the direct complete path from
being used.

Reported-by: Loic Pallardy 
Signed-off-by: Ulf Hansson 
[ rjw: Comment cleanup ]
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin

PM / wakeup: Rework wakeup source timer cancellation

2019-03-23T13:35:29+00:00

commit 1fad17fb1bbcd73159c2b992668a6957ecc5af8a upstream.

If wakeup_source_add() is called right after wakeup_source_remove()
for the same wakeup source, timer_setup() may be called for a
potentially scheduled timer which is incorrect.

To avoid that, move the wakeup source timer cancellation from
wakeup_source_drop() to wakeup_source_remove().

Moreover, make wakeup_source_remove() clear the timer function after
canceling the timer to let wakeup_source_not_registered() treat
unregistered wakeup sources in the same way as the ones that have
never been registered.

Signed-off-by: Viresh Kumar 
Cc: 4.4+  # 4.4+
[ rjw: Subject, changelog, merged two patches together ]
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

OPP: Use opp_table->regulators to verify no regulator case

2019-02-12T18:46:03+00:00

[ Upstream commit 90e3577b5feb42bac1269e16bb3d2bdd8f6df40f ]

The value of opp_table->regulator_count is not very consistent right now
and it may end up being 0 while we do have a "opp-microvolt" property in
the OPP table. It was kept that way as we used to check if any
regulators are set with the OPP core for a device or not using value of
regulator_count.

Lets use opp_table->regulators for that purpose as the meaning of
regulator_count is going to change in the later patches.

Reported-by: Quentin Perret 
Signed-off-by: Viresh Kumar 
Signed-off-by: Sasha Levin

PM / core: Clear the direct_complete flag on errors

2018-10-13T07:27:25+00:00

commit 69e445ab8b66a9f30519842ef18be555d3ee9b51 upstream.

If __device_suspend() runs asynchronously (in which case the device
passed to it is in dpm_suspended_list at that point) and it returns
early on an error or pending wakeup, and the power.direct_complete
flag has been set for the device already, the subsequent
device_resume() will be confused by that and it will call
pm_runtime_enable() incorrectly, as runtime PM has not been
disabled for the device by __device_suspend().

To avoid that, clear power.direct_complete if __device_suspend()
is not going to disable runtime PM for the device before returning.

Fixes: aae4518b3124 (PM / sleep: Mechanism to avoid resuming runtime-suspended devices unnecessarily)
Reported-by: Al Cooper 
Tested-by: Al Cooper 
Reviewed-by: Ulf Hansson 
Cc: 3.16+  # 3.16+
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

PM / clk: signedness bug in of_pm_clk_add_clks()

2018-09-05T07:26:42+00:00

commit 5e2e2f9f76e157063a656351728703cb02b068f1 upstream.

"count" needs to be signed for the error handling to work.  I made "i"
signed as well so they match.

Fixes: 02113ba93ea4 (PM / clk: Add support for obtaining clocks from device-tree)
Cc: 4.6+  # 4.6+
Signed-off-by: Dan Carpenter 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

PM / OPP: Update voltage in case freq == old_freq

2018-07-03T09:24:47+00:00

commit c5c2a97b3ac7d1ec19e7cff9e38caca6afefc3de upstream.

This commit fixes a rare but possible case when the clk rate is updated
without update of the regulator voltage.

At boot up, CPUfreq checks if the system is running at the right freq. This
is a sanity check in case a bootloader set clk rate that is outside of freq
table present with cpufreq core. In such cases system can be unstable so
better to change it to a freq that is preset in freq-table.

The CPUfreq takes next freq that is >= policy->cur and this is our
target_freq that needs to be set now.

dev_pm_opp_set_rate(dev, target_freq) checks the target_freq and the
old_freq (a current rate). If these are equal it returns early. If not,
it searches for OPP (old_opp) that fits best to old_freq (not listed in
the table) and updates old_freq (!).

Here, we can end up with old_freq = old_opp.rate = target_freq, which
is not handled in _generic_set_opp_regulator(). It's supposed to update
voltage only when freq > old_freq  || freq > old_freq.

if (freq > old_freq) {
		ret = _set_opp_voltage(dev, reg, new_supply);
[...]
if (freq < old_freq) {
		ret = _set_opp_voltage(dev, reg, new_supply);
		if (ret)

It results in, no voltage update while clk rate is updated.

Example:
freq-table = {
	1000MHz   1.15V
	 666MHZ   1.10V
	 333MHz   1.05V
}
boot-up-freq        = 800MHz   # not listed in freq-table
freq = target_freq  = 1GHz
old_freq            = 800Mhz
old_opp = _find_freq_ceil(opp_table, &old_freq);  #(old_freq is modified!)
old_freq            = 1GHz

Fixes: 6a0712f6f199 ("PM / OPP: Add dev_pm_opp_set_rate()")
Cc: 4.6+  # v4.6+
Signed-off-by: Waldemar Rymarkiewicz 
Signed-off-by: Viresh Kumar 
Signed-off-by: Greg Kroah-Hartman

PM / Domains: Fix error path during attach in genpd

2018-07-03T09:24:47+00:00

commit 72038df3c580c4c326b83c86149d7ac34007532a upstream.

In case the PM domain fails to be powered on in genpd_dev_pm_attach(), it
returns -EPROBE_DEFER, but keeping the device attached to its PM domain.
This leads to problems when the next attempt to attach is re-tried. More
precisely, in that situation an -EEXIST error code is returned, because the
device already has its PM domain pointer assigned, from the first attempt.

Now, because of the sloppy error handling by the existing callers of
dev_pm_domain_attach(), probing is allowed to continue when -EEXIST is
returned. However, in such case there are no guarantees that the PM domain
is powered on by genpd, which may lead to hangs when buses/drivers tried to
access their devices.

Let's fix this behaviour, simply by detaching the device when powering on
fails in genpd_dev_pm_attach().

Cc: v4.11+  # v4.11+
Signed-off-by: Ulf Hansson 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman