linux-stable.git/drivers/base/power/main.c, branch linux-3.3.y

PM: Run the driver callback directly if the subsystem one is not there

2011-12-21T21:01:05+00:00

Make the PM core execute driver PM callbacks directly if the
corresponding subsystem callbacks are not present.

There are three reasons for doing that.  First, it reflects the
behavior of drivers/base/dd.c:really_probe() that runs the driver's
.probe() callback directly if the bus type's one is not defined, so
this change will remove one arbitrary difference between the PM core
and the remaining parts of the driver core.  Second, it will allow
some subsystems, whose PM callbacks don't do anything except for
executing driver callbacks, to be simplified quite a bit by removing
those "forward-only" callbacks.  Finally, it will allow us to remove
one level of indirection in the system suspend and resume code paths
where it is not necessary, which is going to lead to less debug noise
with initcall_debug passed in the kernel command line (messages won't
be printed for driverless devices whose subsystems don't provide
PM callbacks among other things).

Signed-off-by: Rafael J. Wysocki

PM / Sleep: Make pm_op() and pm_noirq_op() return callback pointers

2011-12-21T21:00:56+00:00

Make the pm_op() and pm_noirq_op() functions return pointers to
appropriate callbacks instead of executing those callbacks and
returning their results.

This change is required for a subsequent modification that will
execute the corresponding driver callback if the subsystem
callback returned by either pm_op(), or pm_noirq_op() is NULL.

Signed-off-by: Rafael J. Wysocki

PM / Sleep: Unify diagnostic messages from device suspend/resume

2011-12-06T21:09:45+00:00

Make pm_op() and pm_noirq_op() use the same helper function for
running callbacks, which will cause them to use the same format of
diagnostic messages.  This also reduces the complexity and size of
the code quite a bit.

Signed-off-by: Rafael J. Wysocki 
Acked-by: Greg Kroah-Hartman

PM / Sleep: Simplify device_suspend_noirq()

2011-11-23T20:13:34+00:00

Remove a few if () and return statements in device_suspend_noirq()
that aren't really necessary.

Signed-off-by: Rafael J. Wysocki 
Reviewed-by: Srivatsa S. Bhat

PM / Sleep: Remove unnecessary label and jumps to it form PM core code

2011-11-23T20:13:24+00:00

The "End" label in device_prepare() in drivers/base/power/main.c is
not necessary and the jumps to it have no real effect, so remove them
all.

Signed-off-by: Rafael J. Wysocki 
Reviewed-by: Srivatsa S. Bhat

PM Sleep: Do not extend wakeup paths to devices with ignore_children set

2011-11-17T20:39:33+00:00

Commit 4ca46ff3e0d8c234cb40ebb6457653b59584426c (PM / Sleep: Mark
devices involved in wakeup signaling during suspend) introduced
the power.wakeup_path field in struct dev_pm_info to mark devices
whose children are enabled to wake up the system from sleep states,
so that power domains containing the parents that provide their
children with wakeup power and/or relay their wakeup signals are not
turned off.  Unfortunately, that introduced a PM regression on SH7372
whose power consumption in the system "memory sleep" state increased
as a result of it, because it prevented the power domain containing
the I2C controller from being turned off when some children of that
controller were enabled to wake up the system, although the
controller was not necessary for them to signal wakeup.

To fix this issue use the observation that devices whose
power.ignore_children flag is set for runtime PM should be treated
analogously during system suspend.  Namely, they shouldn't be
included in wakeup paths going through their children.  Since the
SH7372 I2C controller's power.ignore_children flag is set, doing so
will restore the previous behavior of that SOC.

Signed-off-by: Rafael J. Wysocki 
Acked-by: Greg Kroah-Hartman

drivers/base: Add export.h for EXPORT_SYMBOL/THIS_MODULE as required.

2011-10-31T23:31:38+00:00

Most of these files were implicitly getting EXPORT_SYMBOL via
device.h which was including module.h, but that path will be broken
soon.

[ with input from Stephen Rothwell  ]

Signed-off-by: Paul Gortmaker

Merge branch 'pm-domains' into pm-for-linus

2011-10-21T22:21:52+00:00

* pm-domains:
  ARM: mach-shmobile: sh7372 A4R support (v4)
  ARM: mach-shmobile: sh7372 A3SP support (v4)
  PM / Sleep: Mark devices involved in wakeup signaling during suspend

PM / Sleep: Mark devices involved in wakeup signaling during suspend

2011-10-21T22:19:29+00:00

The generic PM domains code in drivers/base/power/domain.c has
to avoid powering off domains that provide power to wakeup devices
during system suspend.  Currently, however, this only works for
wakeup devices directly belonging to the given domain and not for
their children (or the children of their children and so on).
Thus, if there's a wakeup device whose parent belongs to a power
domain handled by the generic PM domains code, the domain will be
powered off during system suspend preventing the device from
signaling wakeup.

To address this problem introduce a device flag, power.wakeup_path,
that will be set during system suspend for all wakeup devices,
their parents, the parents of their parents and so on.  This way,
all wakeup paths in the device hierarchy will be marked and the
generic PM domains code will only need to avoid powering off
domains containing devices whose power.wakeup_path is set.

Signed-off-by: Rafael J. Wysocki

PM / Suspend: Add statistics debugfs file for suspend to RAM

2011-10-16T21:27:45+00:00

Record S3 failure time about each reason and the latest two failed
devices' names in S3 progress.
We can check it through 'suspend_stats' entry in debugfs.

The motivation of the patch:

We are enabling power features on Medfield. Comparing with PC/notebook,
a mobile enters/exits suspend-2-ram (we call it s3 on Medfield) far
more frequently. If it can't enter suspend-2-ram in time, the power
might be used up soon.

We often find sometimes, a device suspend fails. Then, system retries
s3 over and over again. As display is off, testers and developers
don't know what happens.

Some testers and developers complain they don't know if system
tries suspend-2-ram, and what device fails to suspend. They need
such info for a quick check. The patch adds suspend_stats under
debugfs for users to check suspend to RAM statistics quickly.

If not using this patch, we have other methods to get info about
what device fails. One is to turn on  CONFIG_PM_DEBUG, but users
would get too much info and testers need recompile the system.

In addition, dynamic debug is another good tool to dump debug info.
But it still doesn't match our utilization scenario closely.
1) user need write a user space parser to process the syslog output;
2) Our testing scenario is we leave the mobile for at least hours.
   Then, check its status. No serial console available during the
   testing. One is because console would be suspended, and the other
   is serial console connecting with spi or HSU devices would consume
   power. These devices are powered off at suspend-2-ram.

Signed-off-by: ShuoX Liu 
Signed-off-by: Rafael J. Wysocki